Extending Network To Go From Wireless To Wired?
Feb 17, 2013
I want to go from my asus rt-n66u router wirelessly to another device that I can plug an ethernet cord from a desktop computer. I work on computers and my workstation cannot be close to my router. Instead of installing a wireless adapter everytime I work on a computer, I want something that I can plug an ethernet cord into that will connect wirelessly to my router. I just want to get an internet connection to my work computers without having to run an ethernet cord across my front room. I have read so much about bridging and access points but can't really figure out what would be best or what my router is capable of. I have tried in WDS mode and couldn't get to work with another router I have and also read it cuts you bandwidth and also forces you to use WEP securit
View 2 Replies
ADVERTISEMENT
Jun 8, 2011
I have an existing network in a 300 year old structure. There is a base router from which there are 3 wired (ethernet) lines to parts of the structure. Due to the structure itself (near 2 ft thick walls - masonry) the wireless from the base router reaches only a short distance. I would like to "extend" the wireless reach using those 3 existing runs. So - can I add 3 more routers or should I go with Wireless Access Points or what else would work?
View 5 Replies
View Related
Sep 8, 2012
want to get internet and video signals from mu log home to my pole barn -- about 150 - 175 feet.
View 4 Replies
View Related
Dec 28, 2012
Is it possible to extend a wireless network from an existing extender?I have a BT Home Hub extended to a Netgear Extender.I have tried to extend this on from the netgear with an Edimax without success.Is there anything from www.ebuyer.com that I could try.
View 2 Replies
View Related
Apr 29, 2013
I live in a house with three floors. I have a Virgin Media Superhub on the ground floor with the 30MB package. Whilst the wireless signal quality and speed is good on the ground and first floor, it is intermitent on the second floor and my son wants to connect his PS3 with a wired connection for speed.
I have a N wireless router that I was using before I receiced the new Virgin Superhub. I want to ask if I can connect the old wireless router in my son's room on the second floor and connect it with a Cat5e ethernet cable to the Superhub on the ground floor. This way, I will have a wired connection on the ground floor for my desktop computer, my son will have a wired connection for his PS3 and laptop and his own wireless network.
I just want to know if this will work with an ordinary cable wireless router? Or do I need some sort of special access point? If this will work, do I connect the cable from the Superhub to the WAN port of the old router, or to one of the four other ethernet ports?
View 5 Replies
View Related
Oct 31, 2012
I have a DIR-655 router downstairs on one side of my home. Upstairs on other side of my home wireless signal is really hit and miss. I do have ethernet in the area of my home where I am wanting to extend the signal. Is there a device I can plug into the ethernet to extend my wireless signal without creating a new network or ssid?
View 4 Replies
View Related
Feb 8, 2013
Sending WiFi signal about 1/4 mile from my home to where my daughter lives so she can use her Samsung Galaxy2 Tablet on WiFi.There are homes, condos and trees in between us, so it is not a clear path.So far this is what I have done.I am using a modem and a Netgear WNR834B Wireless N Router.I connected a Hawkins Laptop Extender (HWREN Wireless 150N Mini Extender * single antenna outlet) into the router and connected a WiFi cable from the Hawkins to my tower outside above my roof and have attached a 10 dbi gain Trendnet antenna (omnidirectional) to the cable.But still the WiFi signal doesn't seem to be very strong at all when I test with my phone.And obviously, my daughters tablet does not see my router when she has her tablet search for WiFi.I also tried a 14dbi WIfi ASUS directional antenna and basically came up with the same outcome... she could not see the WiFi signal..My daughter lives in a condo and is not capable or allowed to install any outside antenna system whatsoever.
View 2 Replies
View Related
May 11, 2011
I have a Linksys e3000 and a Linksys WRT120NVery simple setup. the 3000 is in my office. There is a cable that goes from this routerto the living room across the house, it is just laying there. Since I cannot get a wireless signal into that room,I would like, using the cable that is hanging there to make use of the other linksys and provide a wireless signal to the living room, all under the same network. In essence, extending the wireless network using the cable in the living room that is connected to the main router in my office.My question is, without touching the master router, how would I set the 2nd router in the living room up?I understand that DHCP on the 2nd router needs to be turned off, and a channel selected so that it does not overlap. Same SSID, Sam WPA2 key.Or would there be a device better suited for this?I do not want to extend the 2 rooms wirelessly I want to use the cable, then use the wireless in the living room for wireless devices etc.
View 9 Replies
View Related
Dec 6, 2012
I am trying to extend the wireless network at our church beyond a firewall to another area of the builing. We have a cat 5 cable run through the firewall to the other side. I have a brand new Linksys E2500 router. Can I assign an IP to this router and connect it's WAN "Internet" port to one of the ports on the main router that is connected to the cable modem and use it to extend our network?
View 1 Replies
View Related
Dec 20, 2010
I am trying to setup an E3000 router and extending the network with a WAP4410N acting as a repeater.
I am faced with the same problem and it looks like it all comes down to this: without the WAP4410N having a physical connection to the LAN, it will not connect to the E3000 as a wireless client whether it's configured in AP mode: WDS Repeater or in client/repeater.
I've tested with various permutations that have been explored in the various discussions: matching channels/bandsmatching and non-matching SSIDs matching security settings using site survey to set the mac address of the E3000 (ensuring it's the MAC of the 2.4Ghz wireless)setting a static IP on the WAP4410Nensuring both devices are on the same subnet. Any way to be truly successful with this pair up of E3000 & WAP4410N or is it simply a technical product limitation?
View 1 Replies
View Related
Sep 22, 2011
I've recently purchased an E4200, and while it works great, I'd like to use my Apple Airport Extreme (2nd generation) to extend my network to another part of the house that doesn't get as great of a signal. I've become very frustrated trying to accomplish it, and I'm not sure if the problem is more from the Linksys end, the Airport end, or if it's just me.
View 3 Replies
View Related
Nov 8, 2012
I have an Aironet 1240AG. I resides inside a building with its antenna placed on the outside of the building. In direct line of site, I have a light pole to which I could attach another wireless access point to extend my wireless network. This access point would have to be "rugged". Also, it would have to be able to be bridged to the current access point. In reviewing outdoor wireless access points, it appears that the 1552 is the way to go.
View 3 Replies
View Related
Sep 9, 2012
have a netgear dg834gt and an asus dsl-g31. i can connect either to my internet connection as a wireless router.i have an xbox 360 (upstairs) with only an ethernet conection.id like to connect the xbox 360 to one of the routers via ethernet then the router to connect via wifi to the main router to the internet (downstairs)its a long way with no direct route for a cable but a good wifi signalis this possible?i understood i needed to create a bridge?here are a setting option in the asus for a bridge but im lost on set up.
View 6 Replies
View Related
May 8, 2012
have a home network setup that works completely fine everywhere in the house except one room. That room happens to be my son's room that has his Xbox 360 in it. He wants to play online but I cant get a signal back in there and if I do it is extremely weak. I have a linksys E2500 router connected to my cable modem that is wired ot one computer and then my 2 laptops connect to the wireless from that router. The Playstation 3 that is about 15 feet away works fine as well. All our ipods and iPhones work well too. It is only his bedroom where we run into trouble with any of these devices. I actually just upgraded to the E2500 about 2 months ago, so I have a Motorola WR850G sitting around. Can I use this closer to his room to lengthen my signal or how can I proceed to get him a better signal
View 2 Replies
View Related
Jul 25, 2012
As my original Innbox V50U modem/router does not have a strong enough wifi signal I had to add in an additional wifi router - I used a Cisco Linksys E4200.The problem is that if I connect my laptop to the cisco router I can see the Innbox router but not vice versa. There is an additional problem as I have a wireless printer that is connected to the Cisco router. If I connect to the Innbox router I cannot use this printer as I cannot see its IP address.I read somewhere it might be down to the subnet mask. both are set to 255.255.255.0Apologies if this is n00b stuff but I have not had this problem before, I just naturally though the two networks would be able to talk to each-other.
View 1 Replies
View Related
Apr 13, 2012
I've been looking around for quite some time and can't find a complete answer. I have a Linksys WRT54GL router handling my home wireless network located in the living room (let's call it 'Zone A').I have an ethernet cable running from that router to the other end of the house (let's call this one 'Zone B'), where the wi-fi signal is very weak. a. What is the technically correct way to have a strong wi-fi signal at Zone B (with the same SSID, key-phrase, etc.)? b. If I take another WRT54GL router, set the same SSID and key-phrase, disable its DHCP and plug it to the ethernet cable in Zone B - will that do the trick? I've tried the Linksys range extender at a friend's house and it turned out to be a big flop.
View 3 Replies
View Related
Feb 9, 2011
I replaced my old separate modem and router yesterday for a Linksys WAG160N. Basically , my next door neighbor is paying their ISP a fortune and hardly uses their internet at all. Ive offered for them to share mine (With both of us providing full consent , i'm not doing anything dodgy!) as i have a very big download quota and it would save them some money.
Now the 2 houses are separated by an alley but distance from the router to their computer is about 6m. Strangely , my WAG160N doesn't reach that far as my wireless network doesn't even appear when they in their house on their laptop!So after reading up on wireless bridges / wireless range extenders and all sorts of things i'm now very confused.
Im basically looking for the most cost effective way of extending the signal from my WAG160N , possibly through the use of a second router in my garage) to allow the neighbor to get a good signal. I cannot reposition my modem/router from its current location and also cannot connect a second router using an Ethernet cable , it must be done wireless. So , is there a way i can wireless connect my WAG160N to another wireless router in order to extend my signal for my neighbor to use? I was looking at the Netgear WN2000RPT and the WRT160N as someone else had previous success with using this as a repeater.
View 4 Replies
View Related
May 30, 2012
I have an Echolife router, HG532, connected as my main router. It is connected using cable and I use it for wifi too. The signal in other rooms is very weak and I was wondering if it's possible to use a spare router that I have, Echolife HG521, to extend the network coverage?
View 1 Replies
View Related
Jul 24, 2011
I am wanting to buy an access point to extend my range on my home network. I think i've used one AP before and if i remember correctly, after i plugged it into my main rounter and configured it, i unplugged the ethernet from it and moved it to somewhere else in the house. But i can't remember for sure if this is how it works or do i have to have an ethernet cable running to it at all times?
View 10 Replies
View Related
Dec 27, 2012
I am trying to determine the best option for extending my home network. I am currently running an E2000 as my router and am considering the purchase of a Valet Plus to use as only an Access Point. Alternatively I have a used E1000 in good condition. Which would be best for use as an Access Point only?
View 1 Replies
View Related
Dec 11, 2012
how to properly configure 2 different hardware devices to extend the current wifi signal of my home network.I'm using a Motorola SBG6580 DOCSIS 3.0 cable modem as my primary access point (AP) and a Netgear N300 DGN2200v1 ADSL2+ modem router which will function "behind" the SBG6580 in repeater mode. I previously had DSL for my internet connectivity but recently switched to broadband cable for faster speeds.Due to the layout of my home, I cannot physically connect the Netgear router to the Motorola modem via ethernet cable and need both devices to communicate wirelessly. I have already done extensive reading on this subject and best practices suggest that, whenever possible, both units should be the same brand/manufacturer. The Netgear appliance does have the capability of being configured as a repeater so if I don't have to buy a "network extender" that would be my preference.I understand that both units must be configured to have the same SSID, subnet, wireless channel and security encryption. In repeater mode the Netgear router can't be configured to use WPA2-PSK so I need to use WEP instead.
View 1 Replies
View Related
Dec 28, 2011
I have family members living in two houses side by side.One house has the cable modem and a wireless router, and the other doesn't.The signal in one house isn't strong enough to reach the 2nd, so I'm thinking of running cat 5 from the wireless router lan port to the other house.
View 1 Replies
View Related
Apr 4, 2012
I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies
View Related
Oct 10, 2011
I have been involved in the Networking of a museum with a set of "Show" computers which display video, and for this reason cannot have anti virus installed becuase of the performace hit, and also the risk of pop-ups on the videos. They do however need to be connected to the internet as some are interactive and allow people to send simple emails, and they all need to allow remote support when things go wrong.It seems the networking was not thought out very well initially, and there is a single wireless router which serves the staff and public on a secured wireless network, but also serves the "Show" machines via a wired connection from one of its ports, which then connects to a master switch which serves the show machines.Now the wired and wireless is on the same network, and everything shares the same IP subnet (192.168.1.xxx), and this is not a good situation in terms of the securuty of the show machines on the wired network. So I need to work out a way to totally separate the wireless network (which will be very prone to people opening viruses in their emails etc), from the wired network (which will be the show machines which wont be touched by anyone).
I want to achieve this in the simplest and easiest way, and have been reading about the possibility of setting up a second wired router behind the current wireless one, with a different subnet IP address, to which the "Show" machines could be connected. The WAN port on this second router would connect to a LAN port on the wireless router, and thus the show machines could get their internet, but separated from the dangerous wireless network.Does this sound like a sensible start? Will the fact that the wired router (and show machines) are on a completely different subnet to the wireless router (and wireless devices), mean that the wired network will be protected? Or do I need to do more? And is this likely to work?
View 3 Replies
View Related
Oct 12, 2012
I've got to upgrade an older 8 port router to add wireless. I figured there'd be an 8 port router with wireless at Best Buy, but all were 4 port routers. Any 8 port router with wireless I can plug in out of the box? Without having to buy a switch?
View 1 Replies
View Related
Jan 30, 2012
My computer is a 32 bit, Win7 SP1 with Pentium Dual Core 2.6 Ghz and 2Gb of Ram on a wired network. My wife has a similar system using a wireless network. She can ping my IP Address, but I cannot ping hers. We both have full access to the Internet. We are using the same workgroup, and both computers have file and printer sharing enabled and IPv6 addresses and DNS server addresses selected automatically.The problem appears to be with my computer?
Here are my system stats:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2013 Mb
Graphics Card: Intel(R) G41 Express Chipset, 782 Mb
Hard Drives: C: Total - 76308 MB, Free - 49226 MB; D: Total - 286167 MB, Free - 52893 MB; M: Total - 38154 MB, Free - 7 MB;
Motherboard: ASUSTeK Computer INC., P5G41-M LE
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 5 Replies
View Related
Aug 19, 2011
In a bit of a predicament. We're from Ireland and we've two houses on the farm that are exactly 108m as the crow flies. The main house is where we live and the other is more of an office type small house. We've no phone line or internet connection in it and the location is in a dip where we've bad mobile/cell connection. We're don't want to pay an extra55 a month for phone line and internet just to use the internet maybe twice a week. We have a wireless connection in the main home house and want to extend it to the other. I know there are ways but confuesed as to which to use.
View 3 Replies
View Related
Apr 27, 2011
I have a shop about half mile away from my wireless network at my house. I need/want wirless internet in my shop. I have a egenious ap/bridge model EOC2611P that is linked to my home network at my shop to my house. I have internet through the cat5 cable coming out of the bridge but having issues connecting that to the other wirless router. The second router is a linksys e1000. I live out in bfe so no network security seince my closest neighbor is a little over a mile away. I have dissabled DCHP on the linksys and thats where my knowledge stops. I know it can be done but how?
View 5 Replies
View Related
May 14, 2012
We've got an SA520W that's performing nicely, but we need to extend our wireless coverage to a new area of the building (we can get a network cable there). What would be our best option? Just a second SA520W, or are there are APs we should look at?
View 7 Replies
View Related
Jun 21, 2011
Currently I have a Buffalo WHR-HP-G54 wireless router running tomato 1.28. The router sits in the basement in the front corner of the house. The signal is actually very good from the basement, but only on the side of the house where the router is sitting.
Is it possible to add a second router to extend the wireless? I would want to have the second router connected via Cat6 instead of wireless. I would probably go with a WRT54GL.
View 5 Replies
View Related
Mar 15, 2011
I have a Netgear RangeMax Dual Band Wireless-N Router (WNDR3000). It works great in the house. What I would like to do is to be able to use my computer out by my pool. The furthest I can go with my laptop is sitting in a chair right outside my door step. If I walk away from the house, no cigar. Is there a way to extend my internet reception beyond my doorstop?
View 12 Replies
View Related
Jul 10, 2011
My wireless router in my downstairs office won't reach an upstairs bedroom on the other side of my house. I'd like to extend the range. It is not clear if my best option is to get an antenna to boost the range (such as an Alfa 500mW AWUS036H USB Wireless Adapter 802.11 b/g Network Radio Card. Includes 2dBi Omni Antenna ), or to get a repeater to repeat the signal, such as a Hawking HWREN1 Hi-Gain Wireless-300N Range Extender. I also don't know if Linksys has a product for either application that works with 802.11n standard.Finally, since the Linksys E2500 has no antenna or antenna port visible, I am nod sure if an antenna such as the Alfa listed above or a Hawking HSB2 HiGain Signal Booster would even work with the E2500.
View 3 Replies
View Related
Feb 22, 2012
We have the Cisco WRT54G wifi router in many offices in this building. This router has two antennas. These antenna are screw into the back of the router unit. The antenna is male and router side is female of the connector. what are these connectors (some type of RF connectors)? How can we get extension cables for these to move the antenna from one fix location to another point?
View 4 Replies
View Related
