I have a desktop connected to internet broadband provider by a ADSL router with one extra connection to a landline phone.I have a samsung stv LA46D550 with lan port. i woulike to connect TV to the internet provide so that I can browse in TV.what extra hardware and cables do I require(with specifications).also a diagram how to connect these
my desktop has windows 7
TV LCD TV
of coursse I have connected TV to my desktop through an HDMI connector and can use TV screen as either a CLONE monitor to desktoop lor additional monitor to desktop.is this enoiugh or should I connect broadband ADSL router to TV through a router.I prefere wired connections rather wireless.
I am having internet connected to my Desktop with Win XP. Internet mode is Wireless Data Card that can be inserted into USB port. Now I have a laptop with Windows Vista Home Premium. I was able to connect both of them using ethernet cross over cable and successfully enabled file sharing through Local Area Network. But I want to access Internet from the laptop. Is it possible?
FYI, when I typed ipconfig in cmd prompt in desktop, PPP adapter High Speed Data: Connection-specific DNS Suffix . :
I have been having a bit of trouble with networking my two machines to share files and allow printing i have a win 7 laptop and a xp home desktop. I share a net connection via 02 wireless box both systems have wireless i have tried many things
I have a Dell Optiplex running XP wired to a Netgear router. My laptop is a Dell Inspiron 1501 running Windows 7. When I got the new router everything programed easily and I could retrieve files from my desktop and print remotely. Sometimes I would have to "refresh" before the laptop would detect the desktop but now it will not detect the desktop or the printer. I suspect that a Microsoft Update did this but just guessing. I went back and deleted the updates that downloaded around the time that this stopped working. I have tried every thing that I can think of to get it back working but can not get it fixed.
My desktop is not accessible from my laptop in my home network. This seemed to happen all of a sudden.Contact the administrator of this server to find out if you have access. PS: I can access the laptop from my desktop.
I recently moved into a new apartment, where our internet connection is shared with neighbors who are currently out of town on vacation. Most of my devices (Phone, Laptop, Girlfriend's laptop etc) will connect just fine to the passworded network we are meant to be on. My desktop however will not. It doesn't even see that it's an available wireless network.
This same computer was seeing/connecting to wireless networks as recently as this morning. It was also seeing another network for a little while with medium signal strength, which it now doesn't see either.
So far, I've restarted a couple of times, done the 'troubleshoot/repair' options on my wireless network icon, and verified that my wireless adapter is indeed on. I've also asked it to update drivers, but despite having no internet connection, it tells me it has the most current versions.
Normally, I would just reset the router as a first step, however because it's in my neighbors house, I don't have that option, however as I mentioned, this likely wouldn't make a difference, since several other devices, including the laptop I'm posting from now, are quite able to recognize and connect to the network in question.
I have a desktop connected to our work network. It's running XP Pro. I also have a laptop running vista home. Is there a way to hardwire that laptop to the desktop, so i can share files between those two computers, while ALSO keeping my desktop connected to my office network?Since it's vista home, I can't connect the laptop to our network, since it can only connect in workgroups, not networks. But if I'm just able to just use the laptop, create files, and then either save them to a shared folder with my desktop or just save them to the desktop with a switch or something, it wouldn't be a problem that my laptop can't connect to the network.
i want to setup a remote desktop connection for 3 computers on the same network to connect to remotely. Originally i was going to port forward the original windows RDP port and run the windows rdp service but learnt that XP Home Edition doesn't support this feature. I want to be able to log onto these computers at any time remotely with the need of accessing the computer before i connect.
I have a wired desktop PC (HP dx2480) running XP SP3 connected to a LinkSys Wireless 4-port router, and a laptop (Lenovo X61) running XP SP3 connected wireless to the same home network (192.168.0.x). The LinkSys connects by cable to a DSL router for internet access. Both PC and laptop get DHCP IPs from the Linksys (which I have hard-coded - mapped MAC to IP). They are on the same Windows Workgroup "HOME". Both Desktop and Laptop have same Windows User Logins. My desktop had a virus attack (trojan), which I removed and re-installed XP SP3 (from HP disks). Since then the PC seems to have "network sharing and discovery issues" on the network.
- The wired PC CAN ping the laptop, but laptop CANNOT ping PC.
- Both laptop and PC CAN access the internet.
- The laptop and PC COULD NOT see each other on Windows Workgroup, or see shares. This got resolved once I added IPX/SPX/NetBios Protocol on both the wired and wireless NICs on both PC/laptop respectively. NOTE: Before adding this protocol, I double-checked that File-Printer Sharing was enabled on both NICs, Windows Firewall had File-Print Sharing as exclusion. I tried everything including disabling firewall on both, disabling McAfee scanning on both, disabling Firewall on Linksys, but nothing worked.
- The laptop CAN see the NAS (Seagate GoFlexHome - connected by cable to LinkSys) using Seagate Dashboard software and direct IP. The PC CANNOT access the NAS using the Dashboard software but CAN access through direct IP. The NAS is named "goflex_home", which both can discover as \goflex_home from explorer.
- The laptop CAN see ITunes Home Share from a NAS, but the PC CANNOT see any home shares on the NAS (or from the laptop). I even added Home Sharing TCP/UDP ports as exceptions on the Firewall on the PC, but it still doesn't work.
- Some blog checking the node type on IP addresses given by DHCP. The laptop has Node Type "Hybrid", and the PC has "Unknown". I even went to PC regedit.exe and modified the and Change EnableProxy to 0 or 1 (instead of 2 that was in the PC as default).
- I have used SG TCPOptimizer on both laptop and PC to revert to Windows default?
I have a CISCO Linksys WRT610N router on my home network which consists of the following 4 computers; Windows Small Business Server 2003, one Windows 7 Ultimate and two Windows XP Professional. How to configure a VPN on the WRT610N router that would allow me to access all of the computers on my home network over the Internet using the "Remote Desktop Connection" component.
I have a Dell XPS 8300 desktop and have been having issues with the modem connecting to the wireless network just fine but, I'm not able to access the internet. This has only occurred over the last 24 hours and is frustrating. I've read some other recent posts and have gone back and done the System Restore to before the installation of Windows Updates a day or so ago and that has worked twice today. But I'm not a PC expert and I would like to know how I could resolve this issue permanently without having to undo the updates with System Restore every time I power up and log in. How do I figure out what setting is being undone to disconnect the internet connection from my XPS 8300?
I have a dell desktop that uses Windows XP. Today I was cleaning out some unwanted programs that I never use and just take up space. But I don't know if I deleted something that I shouldn't have, or what happened but I am now unable to use my wireless internet. It says that a "network cable is unplugged". I have checked my modem and it is working fine. My brother is receiving internet in is laptop.
I was using Remote Desktop between two home computers hard wired through the router and a switch. Now after upgrading to firmware 1.35 I can't get remote desktop to connect. I get an error that I may not have permission, etc. I have the DIR 655 ver A and am running Windows 7 professional on both computers.
I'm running into an issue with allowing all the PCs to use the one printer connected to devpc. I have a westell 7500 from CenturyLink and a Belkin Wireless G router. This is the layout:
Is there any way to disable router devices from connecting to your network? For example I want people to connect ethernet cables to their laptops, ps3s, pcs, etc but not to routers. How would one go about doing that?
How two PC's can be connected directly for sharing data and resources? What should i use to connect two or more PC's(switch or hub)? Are patch cord and crossover cable the same thing?
I recently set up a VPN on my home computer. I am wondering if it is possible for me to connect to the internet via the VPN without also being connected to the internet via my home wireless network? Right now, whenever I disconnect from my home wireless network, my connection to the VPN will also cut off. This is a problem because should my connection via the VPN ever be interrupted, my home wireless connection would then "take over" the connection, and the eb sites I'm visiting would then be able to see my real IP address, which makes having a VPN pointless. I'd like to have it so that if my VPN connection is interrupted, I will simply not have internet until the VPN connection comes back.
How the password is correct, the firmware is updated, it finds the home network but when I press connect it tries a few seconds then says unsuccessful
the unit itself is Pandigital Novel 7" the router is a Dynex Wireless router with : WPA/WPA2Personel(PSK) Encryption is : TKIP +AES 802.11e QoS is on Wireless mode is both g and b Wifi protection has been both on and off trying to connect SSID is correct and broadcasting.
We got the thing so her ha;f blind mom can play a few games, but I need to connect to download then, either that or know how to download them to the computer then transfer them to the Pandigital?
I have 6 computers connected in LAN network. In one of the machines(client_1) i have installed the VMWARE.VMWare and Clinet_1 are talking to each other whereas VMWare and other clients are not getting connected. I tried various solutions from the internet but all in vain...i would like to have vmware as another machine in my LAN with incoming and outgoing connections to access files.
I just installed my new TV by Samsung UA55D6400. it's great. I understand that it can be connected to local home net. it has Wireless LAN Built-in BU no Wireless LAN Adapter Support. What I have to buy and install in order to connect it to the local net and also stream movies to it?
I have a cable wireless router in the ground floor lounge and have set up a home wireless network. In the upstairs study we have two desktop computers connected to the router via the wireless network. I have a laptop computer used around the house and garden which also uses the wireless network.A laser printer and an inkjet printer are both connected to one of the computers in the study via USB and are shared with all computers.This means that the computer with the printers connected must by running if anyone requires prints. Both printers have USB and Ethernet ports – but running a network cable to the router downstairs is impractical.Is there a way of connecting the printers directly to the network and leave them powered up so they can be used by any of the computers. I am hoping that there is some extra hardware that will enable me to do this perhaps via wireless.Or – would it be possible to use mains Powerline Network adaptors – with one adapter connected by Ethernet cable to the router and other adaptors connected by cable to each printer.
My Linksys Wireless-N Home Router, having a model no: WRT120N keeps disconnecting and connecting.. what is the best thing I could do to eliminate that?
I'm in university halls, using the university wireless network. The network seems to be a large number of routers all with the same SSID on the same network.Usually my connection is great; but sometimes my computer decides to switch to the router from another flat. A few minutes ago my wireless config utility told me I was connected to the flat 24 router. I am now connection to the flat 26 router. It wouldn't be much of a problem, only it's give or take, around 140 times slower because of how far away it is. Heres a quick comparison of the speeds:ad Connection: (The ping here is very mis-leading, it took several minutes to calculate the ping and several more minutes simply to start the download whereas on the previous test it was instant)Here is one I took in December which shows how bad the ping can get:How do I tell my computer to ignore those other routers with the same SSID? They have different MAC addresses, is there something I can do with that? Windows can't tell the difference, I have to do it through the driver software that came with my Edimax wireless card, it recognises each router seperately but ultimately it always recognises it primarily by it's SSID. Sometimes it sticks to the good one, sometimes it changes every few minutes and I have to manually change it back and it is very frustrating, can't it just ignore the bad connection completely?
I can't login to change any of the router settings and the router doesn't have any ethernet ports for students to use, so I need a solution from the PC end (If I could i'd simply change the SSID to something slightly different so it didn't clash, then there would be no problem). The router is literally right outside my door, but my computer insists on switching to the one 50 metres away instead
What I learned was it was bad to connect directly to the modem because you are left open to the internet. Currently my friend just got the internet and I told them to buy a router but they did not, and just have it directly connected to the modem. Is this fine, because they only have one computer, and it works fine for now, but wouldn't this be prone for attack?
I have a home network. There are a total of 3 PCs. Each runs Server 2008 32 bit. One PC - Lets say Server A has 2 NICs with Ip addresses, 10.0.0.10/30, 10.0.0.2/30.Other two computers Server B and Server C have single NIC with addresses 10.0.0.1/30 and 10.0.0.9/30 resp. So as you can see that there are two subnets 10.0.0.2 - 1 and 10.0.0.9 - 10. I can ping B and C from A. I want that B and C can also ping each other and if I run tracert on B or C, it should give me the route to the destination via A. All this without any other hardware. Like using route add... etc eg. if I write tracert 10.0.0.9 on B, it should return a route like 10.0.0.1-----10.0.0.10------10.0.0.9. Refer to the image that I have Attached
Unlike most DVR's, this particular model has a 4-Channel RJ-45 input (others normally have analog BNC video inputs) this is achieved since the cameras come with video baluns which make use of ethernet (RJ-45) wire.can I have such a set-up without using a DVR, instead I would channel 4 cameras to a wireless router with 4 RJ-45 inputs? From there maybe I could connect it to the internet for remote viewing or to a home network for better streaming / saving video recorded into hard disk?
I'm having issues connecting a HP 9000dn printer to my home network. I have windows 7 x64 with a Belkin wireless router. I have the printer (via a jetdriect 615n driver) connected to my router and the computer will not see the printer. I'm a newbie to networking
I have a computer that was previously connected on-site (hard wired) to a corporate network. I am now attempting to connect it on-site to my home network. While I have a live Internet connection going into the computer, I cannot connect to the Internet. Is there soem sort of setting adjustment that i need to make?
I've got a 2600 that I am wanting to connect to my cable modem. However I don't have the knowledge to get it running. My ISP uses a dynamic IP and I am unable to get it to connect.
ROUTER#show run Building configuration... Current configuration : 685 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec
I split my network into 2 to make it more accessible during peak time and to minimize internet traffic. However by doing this only the first network can access our Network Access Storage, the other network can access it because the two are separated by different router and switch also the supervisor need to see both network at the same time for monitoring purposes..
We live in a large ranch styled house. Conversely, we installed two broadband connection at opposite ends of the home. One cable and one DSL. Reason: Kids share DSL and Parents have the cable all to themselves. We are currently wanting to setup a media server where both networks would have access to a database of media files. It would be in the middle of the house and each network would connect to it wirelesslyI guess first off, is this possible
