Connecting To VPN Without Home Wireless Network

Apr 17, 2011

I recently set up a VPN on my home computer. I am wondering if it is possible for me to connect to the internet via the VPN without also being connected to the internet via my home wireless network? Right now, whenever I disconnect from my home wireless network, my connection to the VPN will also cut off. This is a problem because should my connection via the VPN ever be interrupted, my home wireless connection would then "take over" the connection, and the eb sites I'm visiting would then be able to see my real IP address, which makes having a VPN pointless. I'd like to have it so that if my VPN connection is interrupted, I will simply not have internet until the VPN connection comes back.

I am running Windows 7.

View 8 Replies


ADVERTISEMENT

Home Network :: Connecting Tv To Internet Via Laptop Wireless

Apr 9, 2011

Just got an HDTV, has a load of fancy internet stuff, but only has a wired connection and I can't put my router in this room, and would rather not have to run a wire up from downstairs.

I'm guessing there is a way of connecting to the wireless on my laptop in this room, connect the laptop to the tv via an ethernet cabe, and bridge the connections or something so that my tv gets the internet from the laptop. That's gotta be possible, no? When I try it tho, the connections bridge, but the tv says "Gateway is not connected, gateway address wrong or unavailable". Using auto IP.

View 8 Replies View Related

Connecting Trendnet TEW - 694UB Wireless Adapter On Home Network?

Feb 21, 2012

I've installed a Trendnet TEW-694UB wireless adaptor on my laptop and am trying to connect to my home network. I get a message "Acquiring network address" but it never connects.

View 5 Replies View Related

Home Network :: Connecting PS3 To Playon In A Difficult Structured Network?

Apr 17, 2011

Connecting PS3 to Playon in a difficult structured network?

View 1 Replies View Related

Home Network :: Connecting PCs On Different Subsets To Network Printer?

Jul 1, 2012

I'm running into an issue with allowing all the PCs to use the one printer connected to devpc. I have a westell 7500 from CenturyLink and a Belkin Wireless G router. This is the layout:

View 6 Replies View Related

Home Network :: Disable Other Routers From Connecting To Network?

Feb 15, 2013

Is there any way to disable router devices from connecting to your network? For example I want people to connect ethernet cables to their laptops, ps3s, pcs, etc but not to routers. How would one go about doing that?

View 1 Replies View Related

Home Network :: Different Ways Of Connecting Two Or More PC's

Jul 18, 2012

How two PC's can be connected directly for sharing data and resources? What should i use to connect two or more PC's(switch or hub)? Are patch cord and crossover cable the same thing?

View 3 Replies View Related

Home Network :: Connecting Desktop And TV?

Oct 9, 2012

I have a desktop connected to internet broadband provider by a ADSL router with one extra connection to a landline phone.I have a samsung stv LA46D550 with lan port. i woulike to connect TV to the internet provide so that I can browse in TV.what extra hardware and cables do I require(with specifications).also a diagram how to connect these

my desktop has windows 7

TV LCD TV

of coursse I have connected TV to my desktop through an HDMI connector and can use TV screen as either a CLONE monitor to desktoop lor additional monitor to desktop.is this enoiugh or should I connect broadband ADSL router to TV through a router.I prefere wired connections rather wireless.

View 7 Replies View Related

Connecting A Pandigital Novel To The Home Network?

Apr 15, 2011

How the password is correct, the firmware is updated, it finds the home network but when I press connect it tries a few seconds then says unsuccessful

the unit itself is Pandigital Novel 7"
the router is a Dynex Wireless router with : WPA/WPA2Personel(PSK)
Encryption is : TKIP +AES
802.11e QoS is on
Wireless mode is both g and b
Wifi protection has been both on and off trying to connect
SSID is correct and broadcasting.

We got the thing so her ha;f blind mom can play a few games, but I need to connect to download then, either that or know how to download them to the computer then transfer them to the Pandigital?

View 8 Replies View Related

Home Network :: VMWare Not Connecting To Lan?

Dec 14, 2012

I have 6 computers connected in LAN network. In one of the machines(client_1) i have installed the VMWARE.VMWare and Clinet_1 are talking to each other whereas VMWare and other clients are not getting connected. I tried various solutions from the internet but all in vain...i would like to have vmware as another machine in my LAN with incoming and outgoing connections to access files.

View 9 Replies View Related

Connecting TV To Local Home Network

Nov 27, 2011

I just installed my new TV by Samsung UA55D6400. it's great. I understand that it can be connected to local home net. it has Wireless LAN Built-in BU no Wireless LAN Adapter Support. What I have to buy and install in order to connect it to the local net and also stream movies to it?

View 3 Replies View Related

Connecting Printers To A Home Network?

Jan 7, 2012

I have a cable wireless router in the ground floor lounge and have set up a home wireless network. In the upstairs study we have two desktop computers connected to the router via the wireless network. I have a laptop computer used around the house and garden which also uses the wireless network.A laser printer and an inkjet printer are both connected to one of the computers in the study via USB and are shared with all computers.This means that the computer with the printers connected must by running if anyone requires prints. Both printers have USB and Ethernet ports – but running a network cable to the router downstairs is impractical.Is there a way of connecting the printers directly to the network and leave them powered up so they can be used by any of the computers. I am hoping that there is some extra hardware that will enable me to do this perhaps via wireless.Or – would it be possible to use mains Powerline Network adaptors – with one adapter connected by Ethernet cable to the router and other adaptors connected by cable to each printer.

View 4 Replies View Related

Home Network :: Router Keeps Disconnecting And Connecting?

Jul 20, 2011

My Linksys Wireless-N Home Router, having a model no: WRT120N keeps disconnecting and connecting.. what is the best thing I could do to eliminate that?

View 5 Replies View Related

Home Network :: PC Keeps Connecting To The Wrong Router?

Feb 18, 2012

I'm in university halls, using the university wireless network. The network seems to be a large number of routers all with the same SSID on the same network.Usually my connection is great; but sometimes my computer decides to switch to the router from another flat. A few minutes ago my wireless config utility told me I was connected to the flat 24 router. I am now connection to the flat 26 router. It wouldn't be much of a problem, only it's give or take, around 140 times slower because of how far away it is. Heres a quick comparison of the speeds:ad Connection: (The ping here is very mis-leading, it took several minutes to calculate the ping and several more minutes simply to start the download whereas on the previous test it was instant)Here is one I took in December which shows how bad the ping can get:How do I tell my computer to ignore those other routers with the same SSID? They have different MAC addresses, is there something I can do with that? Windows can't tell the difference, I have to do it through the driver software that came with my Edimax wireless card, it recognises each router seperately but ultimately it always recognises it primarily by it's SSID. Sometimes it sticks to the good one, sometimes it changes every few minutes and I have to manually change it back and it is very frustrating, can't it just ignore the bad connection completely?

I can't login to change any of the router settings and the router doesn't have any ethernet ports for students to use, so I need a solution from the PC end (If I could i'd simply change the SSID to something slightly different so it didn't clash, then there would be no problem). The router is literally right outside my door, but my computer insists on switching to the one 50 metres away instead

View 2 Replies View Related

Home Network :: Connecting Directly To Modem?

Feb 8, 2011

What I learned was it was bad to connect directly to the modem because you are left open to the internet. Currently my friend just got the internet and I told them to buy a router but they did not, and just have it directly connected to the modem. Is this fine, because they only have one computer, and it works fine for now, but wouldn't this be prone for attack?

View 3 Replies View Related

Home Network :: Connecting Different Subnets Without Router?

Apr 12, 2012

I have a home network. There are a total of 3 PCs. Each runs Server 2008 32 bit. One PC - Lets say Server A has 2 NICs with Ip addresses, 10.0.0.10/30, 10.0.0.2/30.Other two computers Server B and Server C have single NIC with addresses 10.0.0.1/30 and 10.0.0.9/30 resp. So as you can see that there are two subnets 10.0.0.2 - 1 and 10.0.0.9 - 10. I can ping B and C from A. I want that B and C can also ping each other and if I run tracert on B or C, it should give me the route to the destination via A. All this without any other hardware. Like using route add... etc eg. if I write tracert 10.0.0.9 on B, it should return a route like 10.0.0.1-----10.0.0.10------10.0.0.9. Refer to the image that I have Attached

View 7 Replies View Related

Connecting CCTV To A Network (home Group)?

Jul 16, 2012

Unlike most DVR's, this particular model has a 4-Channel RJ-45 input (others normally have analog BNC video inputs) this is achieved since the cameras come with video baluns which make use of ethernet (RJ-45) wire.can I have such a set-up without using a DVR, instead I would channel 4 cameras to a wireless router with 4 RJ-45 inputs? From there maybe I could connect it to the internet for remote viewing or to a home network for better streaming / saving video recorded into hard disk?

View 6 Replies View Related

Connecting A HP 9000dn Printer To Home Network?

Oct 29, 2011

I'm having issues connecting a HP 9000dn printer to my home network. I have windows 7 x64 with a Belkin wireless router. I have the printer (via a jetdriect 615n driver) connected to my router and the computer will not see the printer. I'm a newbie to networking

View 3 Replies View Related

Connecting To Home Network After Being Connected To Corporate?

Feb 7, 2012

I have a computer that was previously connected on-site (hard wired) to a corporate network. I am now attempting to connect it on-site to my home network. While I have a live Internet connection going into the computer, I cannot connect to the Internet. Is there soem sort of setting adjustment that i need to make?

View 5 Replies View Related

Cisco WAN :: Connecting 2600 To Home Network?

Jun 20, 2012

I've got a 2600 that I am wanting to connect to my cable modem. However I don't have the knowledge to get it running. My ISP uses a dynamic IP and I am unable to get it to connect.
 
ROUTER#show run
Building configuration... 
Current configuration : 685 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec

[code].....

View 7 Replies View Related

Home Network :: Connecting 2 Network To Access NAS?

Apr 9, 2013

I split my network into 2 to make it more accessible during peak time and to minimize internet traffic. However by doing this only the first network can access our Network Access Storage, the other network can access it because the two are separated by different router and switch also the supervisor need to see both network at the same time for monitoring purposes..

View 6 Replies View Related

Home Network :: Connecting Two LANs To A Media Server?

Dec 2, 2011

We live in a large ranch styled house. Conversely, we installed two broadband connection at opposite ends of the home. One cable and one DSL. Reason: Kids share DSL and Parents have the cable all to themselves. We are currently wanting to setup a media server where both networks would have access to a database of media files. It would be in the middle of the house and each network would connect to it wirelesslyI guess first off, is this possible

View 3 Replies View Related

Connecting Lenovo Home Laptop To Work Network

Feb 23, 2011

What do I need to connect to my office network when want to work at home from my laptop.

View 1 Replies View Related

Home Network :: Connecting Two Computers For Sharing Files

Jul 20, 2012

They both have laptops and share data via a flash drive and emails between the two laptops.This is the scenario, They both input data into one excel spreadsheet on laptop 1. Laptop 2 works on data, puts it onto a flash drive then goes to laptop 1 and opens the spreadsheet and enters data from flash drive.My thought is wouldn't it be great if they could use some type of VPN? They could both work from home and access each others computer files, spreadsheet and databases.

View 2 Replies View Related

Home Network :: Connecting A Router To Switch To Use Internet?

Mar 19, 2012

I have 24 port switch which is already connected to internet through static IP. Now I want to use a router as a wireless device to use internet. How do I connect router to switch?

View 3 Replies View Related

Home Network :: Connecting A Router In (bridge) Mode To A Wireless Router?

Mar 23, 2011

I have a Thomson TG585 v7 router which is in bridge mode. I also have a NetGear DGND3300v2 router which I would like to connect to the Thomson (eventually I will purchase a switch and connect another device along with the NetGear). The problem is that the NetGear only has 4 LAN ports and no WAN ports, which I assume you would need to set this up.

View 4 Replies View Related

Home Network :: Redirect Personal Web Page When Connecting For First Time

Mar 13, 2011

I want to create an ad hoc network on my lap and when other users connect to my ad hoc network and open your browser for the first time ... I take a personal website, not to have set in your browser ..

View 1 Replies View Related

Home Network :: Connecting Remote Sites - Security Required?

Apr 8, 2011

for example, there are 3 sites, A, B and C. A and B are 1.5 km apart and both are separate LAN(mixture of wireless and wired). C is 35 km apart from A and B. I have to connect A, B and C so that they can communicate with each other. Security is required.

View 8 Replies View Related

Home Network :: Connecting Cisco 2611 To Linksys E1000?

Aug 3, 2011

I'm trying to connect my Cisco lab to the internet. I've configured my 2611 to accept DHCP. I can ping the Linksys E1000 router but can't ping the modem on the other side, and cannot get out to the internet with the PC that's connected to the lab. When I look at the DHCP table in the E1000 the 2611 shows up in the table. I can ping all other computers on the lan, just not the modem to get out to the net.I have the configuration for the 2611. Did I miss something. Is the modem blocking ICMP traffic?

Router#sh run
Building configuration...
Current configuration : 931 bytes
!
version 12.3
service timestamps debug datetime msec

[code].....

View 3 Replies View Related

Home Network :: Connecting Router - Unable To Get Dynamic IP Address

Dec 19, 2011

I have a high speed wireless DSL router from my ISP (Telus). I use one port off the router to connect directly to my desktop computer. Another port is connected to a switch to which ethernet cables to three other rooms are connected. My problem is that when I connect my Bell PVR (9242) to the 'switched' ethernet cable, I'm apparently not able to get a dynamic ip address, which the Bell unit requires, and can't connect to the network.can I connect another router, in place of the switch, to deliver dynamic IP addresses to whatever I connect to the ports in the other rooms in my house?

View 2 Replies View Related

Home Network :: Connecting To Internet From Vista Laptop Through Win XP Desktop

Feb 13, 2011

I am having internet connected to my Desktop with Win XP. Internet mode is Wireless Data Card that can be inserted into USB port. Now I have a laptop with Windows Vista Home Premium. I was able to connect both of them using ethernet cross over cable and successfully enabled file sharing through Local Area Network. But I want to access Internet from the laptop. Is it possible?

FYI, when I typed ipconfig in cmd prompt in desktop,
PPP adapter High Speed Data:
Connection-specific DNS Suffix . :

[Code].....

View 2 Replies View Related

Wifi Home Network Loses All Connection When Connecting Smartphone

Nov 3, 2011

just bought a Wifi DSL Router Lynksys WAG120N and managed to connect all e-gadgets on Wifi the PS3, the Pc and my Laptop, which are all communicating even through shared drives and Mediaserver. Every time that I am trying to connect with my Sony Arc the Wifi for all connected clients is lost and the internet connection stops

View 1 Replies View Related

Connecting Ipod Touch To Internet On Home Wifi Network?

Feb 20, 2012

I am trying to connect my iPod touch to the internet. We have a home wifi network, but it keeps saying i wasn't able to join the network.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved