I've installed a Trendnet TEW-694UB wireless adaptor on my laptop and am trying to connect to my home network. I get a message "Acquiring network address" but it never connects.
View 5 RepliesTrying to connect my Dell Dimension E310 to my Linksys WRT54GS with a TRENDnet wireless N USB adapter. It sees the router, it connects, I show strong signal strength, but get a "limited connection or no connection" error back from the router...can't get on the Internet. If I use an Ethernet wire and connect it to the router, it can set up a wireless connection with the machine, I can unhook the hardwire, and I'm good to go. But every time I reboot, it won't connect unless I set it up with the hardwire first. Impractical.All other devices attached to the router are fine and connected to the Internet. How can I get the router to maintain the settings for this new connection so it will connect wirelessly when I reboot?
View 1 Replies View RelatedI'm trying to connect to the internet on another PC (on my desktop, not this laptop I'm sending this request on). I know my network is working OK, because I'm on it now (on my laptop), but the Realtek adapter is not connecting on my destop PC.
View 14 Replies View RelatedIm using an old tower with XP SP3. Most if not all drivers are up to date.I recently have come home from college where the computer connected to the internet through a cable and i now have to use wireless.I went out and bought a Trendnet TEW-648UB Wireless n adapter, installed it and tried to connect to my home network.It has been going from acquiring network address to no connection every ten seconds then repeating. I am fairly sure that this is not the router because i am on my sisters desktop which is a wireless connection and im on the internet. so far i have:
checked to make sure that WZC is enabled, it is.
tried checking and unchecking the Use Windows to to configure my wireless network settings
enabling and disabling my adapter
reinstalling my adapter
repairing connection
disabling any and all firewalls
ipconfig /release
ipoconfig /renew
netsh int ip reset reset.log
netsh winsock reset catalog
lots of computer restarting
and for good measure i pinged 192.168.4.1 and ping 24.229.54.212 not sure why but kinda frustrated so why not
here's the cmd stuff:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsFrost3>ipconfig[code]....
I have TPNW721N wireless network adapter on my Compaq Presario sr1520nx. I am using latest driver. I am using Windows XP. Using Windows Zero Wireless.When I connect I get a red X under the red and side of wireless connect icon on system tray.
[URL]
It would not connect to the internet even after I click repair.If did an ipconfig /all and this is what I got-
Windows IP Configuration
Host Name . . . . . . . . . . . . : Myname
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
My laptop is an ACER Aspire 4750z. I installed Ubuntu version 12 for a change, then I got fed up with it and installed Windows 7 back. Before installing Ubuntu my wireless network adapter used to connect to wifi, now after reinstalling windows 7 it wont connect to WiFi. The wireless icon in the task bar shows the available wifi but it doesn't connect.My wireless network adapter is Atheros AR5B97
View 1 Replies View RelatedI recently set up a VPN on my home computer. I am wondering if it is possible for me to connect to the internet via the VPN without also being connected to the internet via my home wireless network? Right now, whenever I disconnect from my home wireless network, my connection to the VPN will also cut off. This is a problem because should my connection via the VPN ever be interrupted, my home wireless connection would then "take over" the connection, and the eb sites I'm visiting would then be able to see my real IP address, which makes having a VPN pointless. I'd like to have it so that if my VPN connection is interrupted, I will simply not have internet until the VPN connection comes back.
I am running Windows 7.
Just got an HDTV, has a load of fancy internet stuff, but only has a wired connection and I can't put my router in this room, and would rather not have to run a wire up from downstairs.
I'm guessing there is a way of connecting to the wireless on my laptop in this room, connect the laptop to the tv via an ethernet cabe, and bridge the connections or something so that my tv gets the internet from the laptop. That's gotta be possible, no? When I try it tho, the connections bridge, but the tv says "Gateway is not connected, gateway address wrong or unavailable". Using auto IP.
I have set up a wireless home network using ADSL with the following components: TrendNet TEW- 432 BRP Wireless Router Gateway Desktop with Windows 7 OS, iMac desktop with Leopard 10.5.7 OS Compaq Presario Notebook with Vista Home Premium OS Service Pack 2 I am able to connect to the network with all 3 but I have a problem with the Notebook. It is very slow to connect and sometimes takes 15 minutes or more to find the network. Once it is connected it works fine and doesnt disconnect, but if I have to reboot for any reason the same problem occurs. It does not appear to be a problem with the placement of the router and the signal strength which is "very good" to "excellent". I say "slow to connect (again)" because this had occurred before and I returned the laptop under warranty. HP replaced the wireless network card and it worked fine, but the problem has come back over a year later. I suspect that the card is not at fault and that the problem is elsewhere but I am at a loss as to what it might be.
View 14 Replies View Relatedreinstalled my windows 7 and it doesn't have the network adapter drivers,so i go and dowloand the drivers i install and it still says no drivers installed, and yes i got the right driver,i tryed everything just cant get it working
View 2 Replies View RelatedConnecting PS3 to Playon in a difficult structured network?
View 1 Replies View RelatedI'm running into an issue with allowing all the PCs to use the one printer connected to devpc. I have a westell 7500 from CenturyLink and a Belkin Wireless G router. This is the layout:
View 6 Replies View RelatedIs there any way to disable router devices from connecting to your network? For example I want people to connect ethernet cables to their laptops, ps3s, pcs, etc but not to routers. How would one go about doing that?
View 1 Replies View RelatedNetwork adapter missing - Can't connect with Wi-Fi at home for sharing
View 1 Replies View RelatedHow two PC's can be connected directly for sharing data and resources? What should i use to connect two or more PC's(switch or hub)? Are patch cord and crossover cable the same thing?
View 3 Replies View RelatedI have a desktop connected to internet broadband provider by a ADSL router with one extra connection to a landline phone.I have a samsung stv LA46D550 with lan port. i woulike to connect TV to the internet provide so that I can browse in TV.what extra hardware and cables do I require(with specifications).also a diagram how to connect these
my desktop has windows 7
TV LCD TV
of coursse I have connected TV to my desktop through an HDMI connector and can use TV screen as either a CLONE monitor to desktoop lor additional monitor to desktop.is this enoiugh or should I connect broadband ADSL router to TV through a router.I prefere wired connections rather wireless.
How the password is correct, the firmware is updated, it finds the home network but when I press connect it tries a few seconds then says unsuccessful
the unit itself is Pandigital Novel 7"
the router is a Dynex Wireless router with : WPA/WPA2Personel(PSK)
Encryption is : TKIP +AES
802.11e QoS is on
Wireless mode is both g and b
Wifi protection has been both on and off trying to connect
SSID is correct and broadcasting.
We got the thing so her ha;f blind mom can play a few games, but I need to connect to download then, either that or know how to download them to the computer then transfer them to the Pandigital?
I have 6 computers connected in LAN network. In one of the machines(client_1) i have installed the VMWARE.VMWare and Clinet_1 are talking to each other whereas VMWare and other clients are not getting connected. I tried various solutions from the internet but all in vain...i would like to have vmware as another machine in my LAN with incoming and outgoing connections to access files.
View 9 Replies View RelatedI just installed my new TV by Samsung UA55D6400. it's great. I understand that it can be connected to local home net. it has Wireless LAN Built-in BU no Wireless LAN Adapter Support. What I have to buy and install in order to connect it to the local net and also stream movies to it?
View 3 Replies View RelatedI have a cable wireless router in the ground floor lounge and have set up a home wireless network. In the upstairs study we have two desktop computers connected to the router via the wireless network. I have a laptop computer used around the house and garden which also uses the wireless network.A laser printer and an inkjet printer are both connected to one of the computers in the study via USB and are shared with all computers.This means that the computer with the printers connected must by running if anyone requires prints. Both printers have USB and Ethernet ports – but running a network cable to the router downstairs is impractical.Is there a way of connecting the printers directly to the network and leave them powered up so they can be used by any of the computers. I am hoping that there is some extra hardware that will enable me to do this perhaps via wireless.Or – would it be possible to use mains Powerline Network adaptors – with one adapter connected by Ethernet cable to the router and other adaptors connected by cable to each printer.
View 4 Replies View RelatedI have a belkin surf n300 usb wireless N micro adapter. No problems installing this adapter on a HP Desktop running windows 7. I have tried to install on a gateway laptop also running windows y 64 bit. In device manager it show that the product is working. It will not connect to any network. The adapter is an F7D2102 az ver. 2011az
View 2 Replies View RelatedMy Linksys Wireless-N Home Router, having a model no: WRT120N keeps disconnecting and connecting.. what is the best thing I could do to eliminate that?
View 5 Replies View RelatedI'm in university halls, using the university wireless network. The network seems to be a large number of routers all with the same SSID on the same network.Usually my connection is great; but sometimes my computer decides to switch to the router from another flat. A few minutes ago my wireless config utility told me I was connected to the flat 24 router. I am now connection to the flat 26 router. It wouldn't be much of a problem, only it's give or take, around 140 times slower because of how far away it is. Heres a quick comparison of the speeds:ad Connection: (The ping here is very mis-leading, it took several minutes to calculate the ping and several more minutes simply to start the download whereas on the previous test it was instant)Here is one I took in December which shows how bad the ping can get:How do I tell my computer to ignore those other routers with the same SSID? They have different MAC addresses, is there something I can do with that? Windows can't tell the difference, I have to do it through the driver software that came with my Edimax wireless card, it recognises each router seperately but ultimately it always recognises it primarily by it's SSID. Sometimes it sticks to the good one, sometimes it changes every few minutes and I have to manually change it back and it is very frustrating, can't it just ignore the bad connection completely?
I can't login to change any of the router settings and the router doesn't have any ethernet ports for students to use, so I need a solution from the PC end (If I could i'd simply change the SSID to something slightly different so it didn't clash, then there would be no problem). The router is literally right outside my door, but my computer insists on switching to the one 50 metres away instead
What I learned was it was bad to connect directly to the modem because you are left open to the internet. Currently my friend just got the internet and I told them to buy a router but they did not, and just have it directly connected to the modem. Is this fine, because they only have one computer, and it works fine for now, but wouldn't this be prone for attack?
View 3 Replies View RelatedI have a home network. There are a total of 3 PCs. Each runs Server 2008 32 bit. One PC - Lets say Server A has 2 NICs with Ip addresses, 10.0.0.10/30, 10.0.0.2/30.Other two computers Server B and Server C have single NIC with addresses 10.0.0.1/30 and 10.0.0.9/30 resp. So as you can see that there are two subnets 10.0.0.2 - 1 and 10.0.0.9 - 10. I can ping B and C from A. I want that B and C can also ping each other and if I run tracert on B or C, it should give me the route to the destination via A. All this without any other hardware. Like using route add... etc eg. if I write tracert 10.0.0.9 on B, it should return a route like 10.0.0.1-----10.0.0.10------10.0.0.9. Refer to the image that I have Attached
View 7 Replies View RelatedUnlike most DVR's, this particular model has a 4-Channel RJ-45 input (others normally have analog BNC video inputs) this is achieved since the cameras come with video baluns which make use of ethernet (RJ-45) wire.can I have such a set-up without using a DVR, instead I would channel 4 cameras to a wireless router with 4 RJ-45 inputs? From there maybe I could connect it to the internet for remote viewing or to a home network for better streaming / saving video recorded into hard disk?
View 6 Replies View RelatedI'm having issues connecting a HP 9000dn printer to my home network. I have windows 7 x64 with a Belkin wireless router. I have the printer (via a jetdriect 615n driver) connected to my router and the computer will not see the printer. I'm a newbie to networking
View 3 Replies View RelatedI have a computer that was previously connected on-site (hard wired) to a corporate network. I am now attempting to connect it on-site to my home network. While I have a live Internet connection going into the computer, I cannot connect to the Internet. Is there soem sort of setting adjustment that i need to make?
View 5 Replies View RelatedI've got a 2600 that I am wanting to connect to my cable modem. However I don't have the knowledge to get it running. My ISP uses a dynamic IP and I am unable to get it to connect.
ROUTER#show run
Building configuration...
Current configuration : 685 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
[code].....
I split my network into 2 to make it more accessible during peak time and to minimize internet traffic. However by doing this only the first network can access our Network Access Storage, the other network can access it because the two are separated by different router and switch also the supervisor need to see both network at the same time for monitoring purposes..
View 6 Replies View RelatedWe live in a large ranch styled house. Conversely, we installed two broadband connection at opposite ends of the home. One cable and one DSL. Reason: Kids share DSL and Parents have the cable all to themselves. We are currently wanting to setup a media server where both networks would have access to a database of media files. It would be in the middle of the house and each network would connect to it wirelesslyI guess first off, is this possible
View 3 Replies View RelatedWhat do I need to connect to my office network when want to work at home from my laptop.
View 1 Replies View RelatedThey both have laptops and share data via a flash drive and emails between the two laptops.This is the scenario, They both input data into one excel spreadsheet on laptop 1. Laptop 2 works on data, puts it onto a flash drive then goes to laptop 1 and opens the spreadsheet and enters data from flash drive.My thought is wouldn't it be great if they could use some type of VPN? They could both work from home and access each others computer files, spreadsheet and databases.
View 2 Replies View Related