How To Add Screensaver In Domain
Mar 27, 2012How to add .scr screen saver from domain ( Group Policy)
View 1 Replies
ADVERTISEMENT
User Cannot Log Into Domain?
Mar 22, 2012I have a Active Directory user that cannot log onto any computer that's on my organizational domain. The error is "You cannot log on because the logon method you are using is not allowed on this computer"
View 5 Replies View RelatedCan't Log On To Domain After Joining Workgroup
Jun 9, 2011I cannot join domain it saying that "Computer name changes", A domain controller for the domain MyDomain could not be contacted.”. We have domain and workgroup, Actually first its already joined the domain, but I want to map the sharedrive inside the workgroup but I cannot map. Then I change to join workgroup. After I boot up I cannot log in with that user, I log in with administrator and the user is dissappear in the "User Account", but the profile inside document and setting still left surprise. I don't know why Now I create one more user, it can map to share drive also share folder. also can see all other network computer. But only left one is I cannot join the domain. I need this one because of we don't let our user using as administrator account. Before I testing this one I should backup, but now the time
View 2 Replies View RelatedServers :: Two Website Domain On One DNS?
Mar 7, 2011Can we maintain two website domain on single DNS Server? its possible?
View 1 Replies View RelatedAccessing Shares On Other Domain
Mar 14, 2012Have a school which is split into 2 domains (and 2 different subnets). A logged in windows domain user from domain A needs to access a windows share on domain B. So I made a bat file on the pc in domain A to map a drive to the share on domain B, using the net use command but specifying login credentials of a domain user from domain B.The pc on domain A has it's hosts file edited so it can access the server on domain B which the share is on, ping and everything to this server works fine.I created a user in domain B with the corresponding login details as in the batch file, same un and pwd, it didn't work. If I specify the un and pwd in the batch file as the domain admin account on domain B, it works fine everytime. I'm pretty sure it's not a premissions thing as I have given the inital user that I specified in the batch file full control to the share permissions and security permissions on the share in question, it still wouldn't work.
All I can think of, but can't put into good technical words, is that this user I am specifying in the batch file not only needs to have access to the share itself but has to enter the other domain as well, would there be some protocol or something in which it does not have permissions to use effictively but the domain admin clearly does as it works fine for domain admin?
How To Pass From Domain Server
Jul 24, 2011how do I pass from domain server , my network in our compant have ISA server and they close some website like face book , how can I pass over ISA server and use my websites?
View 3 Replies View RelatedForward Or Redirect From IP To Domain Name URL?
Oct 15, 2012What the most cost and time effective way to have an ip request return with another ip address from outside the WAN of the router.Specifically want to have an application request for example 192.168.1.121 and have 173.194.43.41 respond and communicate with the application instead. To make it a bit more interesting I'd like actually to set a table or config file to point to a domain name (url) which gets resolved as an ip address. (Port independent)To get a better understanding:one example might be typing in 192.168.1.121 in a browser and googles search engine comes up on the browser.another example might be typing in 192.168.1.121 in an ftp client and it hooks to an ftp server on the other side of the world which resolves to [URL]. I was looking at openwrt and tomato a little but I don't think I have such a complete grasp on how to do it in general. Being that it seems they are 2 different layers of the network model, I was told it can't be done but I don't know if I can believe that yet. Either by third party software or reprogramming the router or adding another device to the network.
View 3 Replies View RelatedDomain Controller Cannot Be Contacted
Nov 18, 2012In my office we are using two networks , one is 16.x.x.x and another on is 15.x.x.x . 16.x.x.x having the domain controller. 15.x.x.x is only connected with Workgroup. my question is it possible to add 15.x.x.x network system into 16.x.x.x network . I tried to add but it gave error message "Domain Controller can not be contacted". Generally we cant add it into the domain i know that. is there anyway to connect the 15.x.x.x systems into 16.x.x.x domain using router in the network.
View 1 Replies View RelatedPing Computer In Another Domain?
Nov 24, 2011i need to know when a computer shutdown. Is a windows xp. Is in another domain. I cant use VPN.somebody knows a software that alert me (example: by email)?
View 2 Replies View RelatedCannot Obtain Domain Controller Name
Jun 19, 2011Type: Error
EventID: 1054
Description: Windows cannot obtain the domain controller name for your computer network. The specified domain either does not exist or could not be contacted. Group Policy processing aborted.
Dad's work laptop (XP) will no longer connect to any wifi at all. I removed the Intel PRO/set wireless utility so it would default to windows, enabled the Wireless Zero Config. It will acknowledge the network, attempt to get an IP address from the network for 1 minute, then it rotates down to the next network SSID in queue (I have 3 SSID's in our house). When it reaches the end, it just goes back to the "Windows is not connected to any wireless networks" message.
Network Domain Is Not Functional?
Jul 31, 2011i configured a network domain out of which i connected several machines to a single user via 8 port switch. earlier the machine was working. now a days when i log on to server through user it allows me to log on. i am having two problem. i am no longer able to see the entire network on server. when i try to connect to server, the user machine asks user name and password which is quite routine. when i provide user name and password it gives the message that "logon unsuccessful the username and password are the same which you entered at user logon" when enter the user name and password of server it allows me to go inside. after rebooting the problem persists.
View 1 Replies View RelatedHow To Remove IP From Domain Network
Aug 20, 2012i am finding an ip address which is some hardware laptop or something that has got that ip from our doimain network while connected to our network. I dont know who it is and what it is and i always use Advanced Ip scanner and shut down any pcs manually with it and search for illegal hardwares connected to our lan but thisone is unable to be turned off it says unsuccessfull.Is there any software that allows me to kick out hardwares from our domain network?
View 4 Replies View RelatedTL WR740N - Cannot Ping Some IP / Domain
Jun 26, 2011I use TP link-150M wireless Lite N router .Model no :TL-WR740N.I use this route to connect WAN and the computer connect to the LAN port for the router.I use DHCP to allocate the IP address from router in below case.I can browse and ping url...But I cannot ping/browse url...[code]
View 4 Replies View RelatedDomain Name Server Configuration
May 22, 2012I do not have wireless internet access and I get the message "There may be a problem with your Domain Name Server (DNS) configuration" when I try to diagnose the problem.I am on the internet by bypassing the router and having a wired connection from the modem to the computer right now. The problem started when I tried to get a second computer to work with the wireless connection (so with the computer I'm on right now, wireless worked a few days ago). [code]
View 9 Replies View RelatedRestrict DHCP To Domain Only PC's?
Feb 17, 2011is it possible for me to do this on our Windows 2003 network with XP and Windows 7 clients?
View 2 Replies View RelatedSoftware To Change Domain And IP?
Nov 29, 2011My problem is everytime i go to dublin i have to change domain and ip for that lacation for local work, sometime its really pain to change back to our own domain whenever i come back to northern ireland office for connecting LAN.clicking can change different domain and ip for different location.
View 1 Replies View RelatedMultiple Domain Controllers On A WAN?
Sep 24, 2011What is the benefit of having multiple Domain Controllers on a WAN
View 1 Replies View RelatedHow To Forward Domain To LAN Address
Jan 28, 2012I have a couple of domains and servers. I want to forward my domains to my local IP's. Currently, my domains only forward to my WAN ip and then handled by ports. The problem is that I have a lot of the same applications using the same ports.
How do hosting companies do [URL[ For more clarification, This is kind of what I want to do - Domain.com --> 76.xx.xxx.xx --> 192.168.1.xxx ^My domain^ ^My WAN IP^ ^My LAN IP^
Do I need a DNS server? Do I need a proxy server?
NT4 Domain Controller Lost?
Mar 1, 2011In 2004 I had a small home network of an NT4 domain controller with a 98 client and an XP client and an NT4 workstation laptop.ll was fine with the NT4 server providing a central store and print queue for a networked laser.Over time the laptop has been replaced with a Win7 (which will access the files but really doesn't the NT4 domain.) The Win98 has died and now finally the NT4 sever has gone too.I intend to revert now to a workgroup type set-up and forget about domains (I don't need it really) My problem is if I remove my XP machine from the domain I loose all the program menu, shortcuts desktop etc. which are stored under the domain user name login.Can I retrieve these or at least look at them so I can set up the local XP administrator account with all my familiar stuff.
View 3 Replies View RelatedWhat Does 192.168.1.1 Domain Mean In Netstat Command
Sep 28, 2011I was using command prompt and typed in netstat -a to see opened ports on my XP computer. Then I found a weird result I have never seen it before.
It was Proto local address Foreign address state
TCP myXP computernameort# 192.168.1.1:domain Fin_Wait_2
What does this 192.168.1.1:domain mean? I believe 192.168.1.1 is my gateway router, but why it says :domain? few minutes later, I typed netstat -a in the command prompt to check it again, but it wasn't there anymore. does this mean my computer is on a domain network or something? As far as I checked, my computer doesn't seem to be on a domain network, but I just don't know what it means.
LAN Printer To Be Seen On All Users Domain?
Mar 19, 2012We have almost 500 users and theres a network printer which people have to add eachone of them if they want to print and thats a procedure and takes time to show everyone all the steps. I wanted to know because we are using a domain which all pics are connected on that domain also the printer how is it possible to make it that the printer is shown on all automaticly?
View 6 Replies View RelatedUnable To Join To Domain Over VPN?
Feb 3, 2011I'm having issues joining a remote PC to the corporate domain. The VPN we're using is SonicWall.Here's what the error is: Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the fileC:Windowsdebugdcdiag.txt.The domain name "creatormail" might be a NetBIOS domain nameIf this is the case, verify that the domain name is properly registered with WINS.If you are certain that the name is not a NetBIOS domain name, then the following informationubleshoot your DNS configuration.The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller (AD DC) for domain "creatormail":[CODE]
View 3 Replies View RelatedCannot Access Other PC In A Domain Network
Jun 29, 2012I am running Windows Server 2003 with 10 computers running XP connected on a domain network. When i go to my network places - entire network - microsoft windows network - click on domain - i can see all other pc connected here but when i click on them they are asking for username and password. Even if i give username and password they are not opening, i even tried to give Server username and password but it is not working. (All my xp machines have different username and password).
How do i get access to these pc folders? Do i need permission for server?
Domain Controller Cannot Be Found
Jul 5, 2012I hav windows server 2003 w/ 3 clients on my home network.2 of these machines link w/ server when i formatted & try to link 3rd machine it says "A domain controller for the domain fits.local could not be contacted" this problem I have 2003 server + isa server 2004 + exchange server 2003 installed in one core i3 machine..........
View 9 Replies View RelatedHow To Delete Non Existent Domain
Sep 19, 2011How to delete non existent domain
View 1 Replies View RelatedDSCP Domain Name And Password
Jul 26, 2012I work in a manufacturing firm where we have offices at 3 different places say A,B and C. Our ERP server is at our original unit A from where we accessed it at B and C through remote desktop application till now. But now we have hired cloud services to connect to our main ERP server. We are in the process of installing the cloud application on our server at B during which we are encountering a problem. The cloud service provider is asking for domain name and password for the DSCP server based at the orignal unit (A) which no one in the company seems to have any idea about. Our IT guy at A has resigned and has not been replaced. Our IT guy at B is inexperienced and just following the instructions of service provider who is stuck at DSCP domain name and ID. How can I know the domain name and password of DSCP server so that the process moves on?
View 5 Replies View RelatedCisco :: DMZ Connectivity To Domain Controller / AD
Feb 16, 2012We relocated several servers to our DMZ and, without a domain controller in the DMZ (we plan to put a RODC in the DMZ later when we mvoe to Windows Server 2008), i punch through the standard recommended TCP ports. ports 88,135, 389, 53, etc.) to the internal network located DC. I am double hopping to the DC (I hope thast doesn't matter) as the DMZ located web server communicates to another IP address in the same DMZ network and then I NAT that address to the internal IP address of the DC. Everything seems to be working for the servers we moved to the DMZ but i think i don't have all the necessary TCP/UDP ports punched through because we have found that logging into the DMZ servers is taking an extended amount of time, sitting on the “applying settings” screen. For 2-34 minutes. Also, we noticed that our applciations fols have to now add the fully qualified domain names when making calls to servers that just needed the domain name. When i open the access-list up completely without opening specific TCP/UDP ports, the issue is resolved.
View 4 Replies View RelatedCannot Login After Put My Computer In Workgroup From Domain
Aug 4, 2012I have put my pc in work group from domain then it has restart then 1 user has displayed name is what is my pc name,but when i click on it, it become log off again, after so many try i haven't login. there is no any option for switch user.there is only option for shutdown,sleep & restart.
View 2 Replies View RelatedChanged Domain For Workgroup / Can't Log Into User
Jan 29, 2012We have a computer running Windows 2000 Pro that used to connect to a domain at work. Upon bootup, it asks for the user/password.Yesterday we tried to connect it to a little home network by changing the domain to a workgroup with a different name (network name that i used at home) as well. Now when it boots up, asks for a user/password, but now it does not recognize my user name and password.I can log in as an administrator to the Workgroup with the new name. but i cannot access the old Domain with its user and passwords. I tried to change back to the old name and to domain, but when doing that i get and error messsage which says: The following error occurred validating the name "xxxxxxx" (network name that I use at home) this condition may be caused by a DNS lookup problem. so I'm not sure if a should run the clear DNS cache. and if in doing that I'll be able to restored it back to the stage that i was before I made the changes.
View 1 Replies View RelatedServers :: Delay In Logging To Domain?
Jul 16, 2011I have one problem with our windows 2008 server when any user want to log in the domain from his computer, it takes long time. it takes around 5 minutes. I have installed DNS on the same AD Domain. Is that OK ?Secondly i have around 70 users and 4 ISPs.. Each ISP is used for specific data transfer. Each of the ISP is connected via ADSL Router to our switch?
View 3 Replies View RelatedSee Which User In My Domain Modified Folders?
Sep 28, 2012We have shared network drives on my network whose folder structure must not change. We have users who must have full access to the contents of these folders and be able to read/modify/erase and create new files inside these folders. However, the structure of the folders must not change so that other users/programs can locate files within these folders.
Some users sometimes "aggressively click" and drag and drop folders into different locations and can't remember where they dropped them. This makes them inaccessible for other users. We have a lot of folders so I implemented FileWatcher Simple program to monitor these folders and if there is a change in folder structure I get an email with an attached log. The log tells me which folders got created/deleted/renamed and I am able to restore the folder structure if need; but I cannot see who caused these changes.
1. Is there a way for me to see which user in my domain modified the folders?
2. Is there a way to disable users from drag and dropping, deleting, renaming folders yet still maintain full access to the files within these folders?
Adding / Removing Workstations On Domain?
Jul 11, 2011adding/removing/re-adding a workstation to a domain and Active Directory. We use DHCP at work for our addressing scheme. The problem I had when naming a new workstation the same as the one I am replacing on the domain was that I noticed the new pc with that same computer name as the previous pc was still trying to use the IP address that was assigned to the workstation before by dhcp, so the new workstation was not showing it assigned an IP address. I would try pinging the computer name but there was no reply because it was still showing the ip address of the computer disconnected that had the same name.
- remove the faulty workstation from the domain to workgroup, then restart
- then from Active Directory do I need to reset the Computer name
- then do a ipconfig /release on faulty workstation that has been removed from the domain to release the leased ip address in dhcp
- then disconnect the faulty PC and connect the PC I am using to replace the previous PC
- Name this workstation the same as the one I just disconnected and removed from the domain
-Add this PC to the domain and restart
Moved Account To Workgroup From A Domain Now Cannot Log-in
Jun 14, 2012To start off, I work for a small business where we do not have an IT department
One of our users changed his domain to a workgroup (made us rethink who has admin access on all our PC's) thinking that it would somehow fix the problem he was having with not being able to print anything to a network printer. Well, this promptly called for a restart and upon restarting would not allow him to log back into the user account.
This all makes sense to me as to why it will not let him log-in using credentials that he is no longer a part of due to security restrictions. But my question is how do i recover the account? In other words, how do I go about rejoining that user account to the domain that everyone is located on.
If all new user accounts are defaulted to join the domain, how come its not just as easy to move a user from a workgroup back to that domain?
Also, the machine is running Windows XP. It's critical that I get the old user account set back up because it was used for Outlook e-mail as well as several important documents/spreadsheets. I know that none of these files are lost as I can still navigate to them through the Local Disk. But really I would like to get the old user account working instead of having to copy/paste all the old content to a new user account in order to hopefully retain all old settings and configurations. tl;dr A user on our domain moved his user account to a workgroup and now is unable to login or access his user account. How do I move the user account back to the domain?