I want to ping my GNS3 routers from my real LAN PCs. Right now I am able to ping those GNS3 routers from real PC on which GNS3 is installed. The network topology is something like this.
-IP of GNS3 PC on which GNS3 is installed. 192.168.1.102/24 default gateway of LAN: 192.168.1.1/24
I have created a loopback adapter and assigned the IP address of 192.168.1.200/24 (IP is also of same LAN) the cloud and virtual router is dragged and router interface is assigned the IP 192.168.1.201/24. I am able to ping my router interface from 192.168.1.102 (System on which GNS3 is installed). What I want is to ping my router's interface from other LAN PCs line 192.168.1.104, 192.168.105 or from my gateway 192.168.1.1.
I'm using GNS3 in order to revise CCNA, the RIP part But I don't know why, i'v got a pbl with the routage table, especially with the metric which is wrong I don't understand wy the metric is always 1, because it should be 2 or 3 according to the network.
I am trying to do a Multicast lab in gns3 with a tap interface in os x and a linux vm in virtualbox. The os x box is broadcasting to 224.1.1.1. I have verified IP connectivity. I am using PIM dense mode. When I perform a packet capture on the tap interface I see no traffic to 224.1.1.1. However when I ping 224.1.1.1 from os x I see the traffic. Attached is my topology
I test all devices using ping command, from ASA to router was fine (on both interface) but not to Host , and host to router was fine, but only on directly interface(F1/0), and to ASA was not success. am i miss something in my configuration?
I was just brushing up few things in GNS3 and after setting up an SLA.Now when I want to set the track ip I get not option for sla why??I am running c3725-adventerprisek9-mz.124-15.T5 shouldn't it be available?
How many of you use GNS3 for ASA 5500 Firewalls along with ASDM? While I am on the subject of GNS3 I had a questions about the new version and the capture feature. I installed the latest version last night with the new live capture features but it seems to be only one way capture. T Is there a way to fix this?
I have to test new Cisco ASA's IOS version 8.4 in my GNS3 LAB . do provide the link for downloading the same.I dont have direct download access from cisco.com.
I have to use GNS3 for simulate ASA5540.but it does not work. I've installed latest GNS3(0.8.3.1 all in one) in Win7 32bit environment, and used IOS file is asa842-k8.bin.but i can't unpack it properly. it said "Couldn't find any ZIP header in asa842-k8.bin".
I'm about to setup as ASA configuration with GNS3 ASA. how to best test the configuration once complete? I need something like a verification plan to ensure that the configuration would perform if in production.
I need to be able to run more than one BGP routing process on my lab router. I have over connected BGP routers connected to my live production network and I need to emulate the production network with GNS3. However, BGP rules only allow a single BGP routing process on a single router. how to overcome this limitation for my lab?
I have managed to simulate to Cisco ASA's on GNS3 - ASA1 and ASA2. ASA2 is configured as multiple mode to enable contexts while ASA2 has been configured as single mode.
On ASA2 I can assign an IP address to its gigabitethernet interfaces as normal, however I'm unable to assign an interface to the gigabitethernet interfaces on ASA1.
I am trying to configure a client profile under the Any Connect Client Profile tab in the ASDM but keep getting an error message stating "Check that you have a proper Any Connect package installed in the Any Connect Client Software menu. Also check that your ASDM username have enough privilege." My user has sufficient privilege but I am not sure which Any Connect software I should have to enable this. Right now I have anyconnect-win-3.0.10055-k9.pkg installed. This is a lab setup using GNS3.
I'm reading the CCNA Sec book (554) and I've just finished a few chapters on CCP.Is the tool free? Can it be simulated in PT, or emulated in GNS3? Speaking of which, can the entire CCNA/CCNP Sec track be emulated in GNS3?
am using GNS3, and have the 16port switching module. I have created a PC instance and connecting to f/0/0 which is a layer 3 port, I can connect via layer 3 IPs. I then reconfigured and connected the PC instance via a layer 2 port f2/0 which is part of the 16port switch module. All 16 ports are by default in vlan 1. I assigned an IP of 10.1.9.1/24 to the VLAN and gave the PC 10.1.9.2/24. I cannot ping and I cannot even ping 10.1.9.1, the VLAN 1 IP. [code]
I am trying to connect my Ubuntu PC with gns3 router using loopback interface tap0, I am trying to configure the ip address of tap0 by using gns3 router as DHCP Server. But I am finding it difficult to do so.
we are moving to different providers. We currently have multiple sites that have MLP bundles going to our current provider. We are trying to limit our network disruptions by creating a new MLP bundle group and connect it to the new provider, but are having no luck. In a GNS3 lab I have setup I am able to keep my existing MLP bundle up/up over the current provider network. When I attempt to bring up a new MLP group to the other provider my MLP does not come up and keeps going up/up then down/down and shows inactive. Is it possible to have one MLP group go to current vendor router, then create another MLP group and go to the other router?
We have small which I'm looking to implement and have built this on GNS3.
We have:
Router A in site 1 Router B in site 2 Router C in site 3
Router A and B are connection via a point to point 100M link and from Router C we have a 2 point to point one of which is 5Mpbs and going to Router A and Router B.
For Router C to reach Router A network it will go via Router B and these are 100M connection. When the link between Router A and B goes down. Router C should update and start using the 5m route.
For some reson, the routes are not updating. I have to do 'clea ip eigrp ne' for the routes to update and if I reload the routers all works well, it seems the problem is intermittent.
I am configuring site to site vpn on gns3. I have check all the things and everything looks similar from both ends but i can see not a single converstion between them in terms of anything. Not even debug is showing any thing .
I am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
Few days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.
I have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1 IC : 4216A-IR601 H/W Ver:A1 F.W Ver:1.00 NA
when i connect my sylvania netbook to my wireless internet it says connected, excellent signal but when i try to pull up a web page it says can not connect to server...
I'm trying to connect to my home laptop from work. The home laptop is connected to DIR-655 router. I set up the internal and external ports to 3389 using both TCP and UDP protocols with the Application as "Remote Desktop". From my work PC I enter the external IP with :3389 and it fails to connect. I have also tried accessing internally which is failing too. All computers are running Windows 7 Home Premium Remote Access is enable on all.
I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
