I'm about to setup as ASA configuration with GNS3 ASA. how to best test the configuration once complete? I need something like a verification plan to ensure that the configuration would perform if in production.
View 1 RepliesAny one has succeeded in simulating ASA 8.2(not ASA 8.02) in GNS3 ?
I see some are very close in getting it running on GNS3...
[URL]
I have to test new Cisco ASA's IOS version 8.4 in my GNS3 LAB . do provide the link for downloading the same.I dont have direct download access from cisco.com.
View 1 Replies View RelatedI have to use GNS3 for simulate ASA5540.but it does not work. I've installed latest GNS3(0.8.3.1 all in one) in Win7 32bit environment, and used IOS file is asa842-k8.bin.but i can't unpack it properly. it said "Couldn't find any ZIP header in asa842-k8.bin".
View 2 Replies View RelatedI have managed to simulate to Cisco ASA's on GNS3 - ASA1 and ASA2. ASA2 is configured as multiple mode to enable contexts while ASA2 has been configured as single mode.
On ASA2 I can assign an IP address to its gigabitethernet interfaces as normal, however I'm unable to assign an interface to the gigabitethernet interfaces on ASA1.
Everything was working fine till one day, when clicking on Configuration Button you see setup wizard prompt.It's ASDM ver:6.2 and ASA 8.2. Everything is working fine, but now unable to change any rules.
It there simple cure for that?
I Changed my old firewall by an ASA5510, since that change my internet connexion is slower.Some websites takes longer to display.I would like to know if there are some specific configuration about TCP connection or DNS to setup?
I just configured the ISP DNS :
Dns server-group DefaultDNSname-server 194.2.0.20 name-server 194.2.0.50
I have DSL, a firewall, patch panel and hubs.The network was already in place by three previous techs. I am not sure how the current setup is done there is no configuration map.The users in office 1 are all connected to a patch panel that then connects to hubs The second office users connect to a hub that then connects to the patch panel then connects to another hub.The internet is connected to a router that will be replaced with a firewall. Should it be setup like thisdsl modem > firewall > patch panel > hubs > Nodes
View 3 Replies View RelatedI have been having an annoying issue for the past few weeks with my ASA setup. We are using the ASA as our Remote Access Gateway and originally had it setup in a Active/Standby failover configuration using 2 x 5520 ASA's.The original setup of the devices was that the 2 x ASA were setup in a failover configuration, with both of them connecting back to the internal network via a 6500 device. Because of using failover I created a VLAN on the 6500 and put the two ports that connect the ASA's into that VLAN. I then configured the VLAN interface to be the EIGRP interface for the neighbour relationship to the ASA's.
The problem I am seeing is that the EIGRP neighbour relationship between the Active ASA and the 6500 keeps flapping. It occurs abour 4-5 times every day at randmon intervals. Sometimes the neighbour relationship will stay up for 6-7 hours, other times it flaps every 1-2 hours. I initially thought it was due to the failover configuration so I removed one of the ASA's and removed all of the failover configuration, but the EIGRP neighbour flapping problem still exisits. [code] Since removing the failvoer configuration I am thinking it could be a physical cable problem?
We have 2 ASA 5510's setup in an active, standby failover configuration. When the primary fails over to standby, the 3rd party cert does not failover to the standby ASA. The users then receive the CERT missing, invalid message and have to select yes, no to move on. This does not occur when the primary is not in failover mode. It is my understanding that failover fails over certs but in our case it does not apper to be working correctly.
View 1 Replies View RelatedI'm using GNS3 in order to revise CCNA, the RIP part But I don't know why, i'v got a pbl with the routage table, especially with the metric which is wrong I don't understand wy the metric is always 1, because it should be 2 or 3 according to the network.
View 5 Replies View RelatedHave anybody direct link to download IDS image for GNS3 ?
View 1 Replies View RelatedI want to ping my GNS3 routers from my real LAN PCs. Right now I am able to ping those GNS3 routers from real PC on which GNS3 is installed. The network topology is something like this.
-IP of GNS3 PC on which GNS3 is installed. 192.168.1.102/24 default gateway of LAN: 192.168.1.1/24
I have created a loopback adapter and assigned the IP address of 192.168.1.200/24 (IP is also of same LAN) the cloud and virtual router is dragged and router interface is assigned the IP 192.168.1.201/24. I am able to ping my router interface from 192.168.1.102 (System on which GNS3 is installed). What I want is to ping my router's interface from other LAN PCs line 192.168.1.104, 192.168.105 or from my gateway 192.168.1.1.
I am trying to do a Multicast lab in gns3 with a tap interface in os x and a linux vm in virtualbox. The os x box is broadcasting to 224.1.1.1. I have verified IP connectivity. I am using PIM dense mode. When I perform a packet capture on the tap interface I see no traffic to 224.1.1.1. However when I ping 224.1.1.1 from os x I see the traffic. Attached is my topology
View 1 Replies View RelatedI test all devices using ping command, from ASA to router was fine (on both interface) but not to Host , and host to router was fine, but only on directly interface(F1/0), and to ASA was not success. am i miss something in my configuration?
View 5 Replies View RelatedI was just brushing up few things in GNS3 and after setting up an SLA.Now when I want to set the track ip I get not option for sla why??I am running c3725-adventerprisek9-mz.124-15.T5 shouldn't it be available?
View 2 Replies View RelatedI get an IOS image for GNS3? I dont work in a company that would do that for me
View 4 Replies View RelatedI use wireless internet connection and I see “third party setup = Yes under configuration. Is it about sharing data or being monitored
View 1 Replies View RelatedI am trying simulate the next lab on GNS3 but the ping don't work between hosts on the same VLAN.
View 2 Replies View Relatedwe had this cisco router 1901 in one of our remote office and the management wants to configure 4 wireless pc's to only talk to each other for security reasons.
1. is this possible to do in wireless? i know in VLAN this can be done by assigning pc's in port in a switch.
2. if possible, how to implement this setup
How many of you use GNS3 for ASA 5500 Firewalls along with ASDM? While I am on the subject of GNS3 I had a questions about the new version and the capture feature. I installed the latest version last night with the new live capture features but it seems to be only one way capture. T Is there a way to fix this?
View 3 Replies View RelatedHow to set upo configuration & Security after reset
View 2 Replies View RelatedI have a Router, Modem, Switch, and a Switch.
Firewall: FVS338
Switch: FS762T
I have networking skills but I am unsure of how to properly configure routing so that everything can be seen on the network and access internet.Switch is for all towers/servers and router is for laptops.
I need to be able to run more than one BGP routing process on my lab router. I have over connected BGP routers connected to my live production network and I need to emulate the production network with GNS3. However, BGP rules only allow a single BGP routing process on a single router. how to overcome this limitation for my lab?
View 9 Replies View Relatedhow to stress a GNS3 router in order view an increase in its CPU usage?
View 1 Replies View RelatedI've attached the file which shows the issue which im facing in reachability between a PC to GNS3 router.
Home Broadband ->LAN (192.168.1.1) ---- Win 7 (192.168.1.3) -->Loopback Adaptor(192.168.137.1)---->GNS3(cloud-->Router (192.168.137.2))
Win XP (192.168.15)
[Code]....
I am trying to configure a client profile under the Any Connect Client Profile tab in the ASDM but keep getting an error message stating "Check that you have a proper Any Connect package installed in the Any Connect Client Software menu. Also check that your ASDM username have enough privilege." My user has sufficient privilege but I am not sure which Any Connect software I should have to enable this. Right now I have anyconnect-win-3.0.10055-k9.pkg installed. This is a lab setup using GNS3.
View 1 Replies View RelatedI'm reading the CCNA Sec book (554) and I've just finished a few chapters on CCP.Is the tool free? Can it be simulated in PT, or emulated in GNS3? Speaking of which, can the entire CCNA/CCNP Sec track be emulated in GNS3?
View 6 Replies View Relatedam using GNS3, and have the 16port switching module. I have created a PC instance and connecting to f/0/0 which is a layer 3 port, I can connect via layer 3 IPs. I then reconfigured and connected the PC instance via a layer 2 port f2/0 which is part of the 16port switch module. All 16 ports are by default in vlan 1. I assigned an IP of 10.1.9.1/24 to the VLAN and gave the PC 10.1.9.2/24. I cannot ping and I cannot even ping 10.1.9.1, the VLAN 1 IP. [code]
View 5 Replies View RelatedHere is my current config, how to enable and setup NVI on a cisco 1941 router.i think it would fix my issue but i'm unclear on how to implement it to test.
i would like to be able to access an internal server from an outside address.
I'm new to managed networking. So I'm having trouble understanding how to set up my switches properly. I have a closed network with about 20 switches and 2 IDF's. No router, and no internet. I have a SLM 2024 in want to have 4 ports set up with a VLAN. I have another SLM2024 I want to be on the same VLAN some where else. Switch 1 uses port 24 GBIC as and up link port to one of the IDF's. Switch 2 uses ports 12 and 24 copper(LACP) to make a hop from another switch(ports 1 and 13 LACP)which inturn is connected to the same IDF on port 24 GBIC. How do I set up switch 1 ports 7,8,19,20? Also, how do I set up switch 2 ports 7,8,19,20? VLAN 11
View 1 Replies View RelatedI am trying to connect my Ubuntu PC with gns3 router using loopback interface tap0, I am trying to configure the ip address of tap0 by using gns3 router as DHCP Server. But I am finding it difficult to do so.
View 2 Replies View Relatedwe are moving to different providers. We currently have multiple sites that have MLP bundles going to our current provider. We are trying to limit our network disruptions by creating a new MLP bundle group and connect it to the new provider, but are having no luck. In a GNS3 lab I have setup I am able to keep my existing MLP bundle up/up over the current provider network. When I attempt to bring up a new MLP group to the other provider my MLP does not come up and keeps going up/up then down/down and shows inactive. Is it possible to have one MLP group go to current vendor router, then create another MLP group and go to the other router?
View 6 Replies View Related