Limited Speed On Asus M4A89TD PRO / USB3?
Apr 10, 2011
I've got a 75/75Mbit Fibre (FTTH) connection, but my speed seems limited with my new motherboard.
I always had the following speed on my old DDR2 motherboard (Asus M3A32 MVP):
I've recently bought an Asus M4A89TD PRO/USB3 and for some reason my connection is limited to about 40Mbit down and 10Mbit up.
The motherboard has an Realtek PCIe GBE Family Controller and all drivers are up to date and i'm running the latest BIOS version.
I've already tried plugging in another desktop PC and a MacBook on the same LAN cable, and they both get the full 75Mbit up/down.
View 4 Replies
ADVERTISEMENT
Oct 19, 2012
I have: ASUS Netbook with Windows 7 Starter.
As of last night, I cannot connect to any of the wireless networks I use every day (my personal home network or my school's WPA2).
The signal strength is very good, but it says "Limited Access" next to the network name. Apparently "Limited" means "No" because I am not connected. Here's what happened:Lavasoft Ad-Aware was blocking a site that I needed to access. I haven't used Ad-Aware in months, and it did not even appear to be running. So uninstalled it with Add/Remove programs in the control panel. BUT, mid-way through the uninstallation, I got a blue screen and my computer restarted. When my computer booted back up, I could no longer connect to my home's wireless. I'm at school now and I cannot connect here either. Ad-aware is gone from the add/remove programs list, but there is still an Ad-Aware folder in Program Files. The folder still has a bunch of stuff in it, including adaware.exe. I dont see an uninstaller (but i havent really investigated that yet). so now i can't connect to any network. Here's What I've TriedRan troubleshooter. Useless. Turned off my netbook's wireless. turned it back on. Device manager says my Network Adapters are working fine. No yellow or red icons next to them. also tried resetting stuff with the command prompt. something about winsock and netsh. I don't know what I was doing though. just following instructions from other people on yahoo answers when i googled the problem.
View 2 Replies
View Related
Jul 20, 2011
I have QWEST DSL, and I am supposed to get 1mb + download speeds from them. When I talk to them on the phone they test my line at over 1mb and say any problems had to be on my end.
I have replaced my router and my network card. When I test my connection speed at this website CNET Bandwidth Meter: Online Speed Test - CNET Reviews
I get 1.2 mb/sec but I have never gotten better than 160 kb/sec download speed from any website I've downloaded from. Is this a software issue? Is my computer somehow throttling what it receives?
I did a Line Quality Test here DSL Reports and it is here: Line quality test packet loss and latency | DSLReports.com, ISP Information
I did three tests, and the bottom part failed 4 times out of 6, so the failures are repeatable. The data all looks comparable for each test on a cursory examination, not knowing what I am looking for.
I have no idea what this test means/indicates.
So my questions are:
1) What further information do I need to supply? (Assume I don't know how to do what you are asking me to do if it is in the least bit technical.)
2) Is my problem with my phone lines? I live in an older area and the lines have not been updated in decades so it may be that QWEST is claiming they can deliver more then they actually can.
At this point I suspect I will need to get cable in order to get decent download speed, QWEST doesn't offer service at the speed I get, so I can't opt for a lower price/slower speed option from them even though they are not delivering what I am promised.
View 4 Replies
View Related
Apr 8, 2012
NOTE: *this is not a duplicate thread that was closed by valis, its just a lil misunderstanding, i was just showing my download speeds on the applications i used that shows 50kb/s and not torrenting issues*My download speed are always limited to nearly 50kb/s, it cant possibly reach as high as 100kb/s not like last month that shows my download speed at the maximum of nearly 1mb/s On any direct downloadseven using download managers that speeds your downloading tasks to 10x its speed, its always 50 to 60kb/s not even reaching 100kb/s it sucks!! it doesn't even multiply my download speed into 2x[CODE]
View 1 Replies
View Related
Jun 7, 2012
I have a 100 Mbps router (which I can't change). But all my computers, media players/streamers, NAS have gigabit Ethernet. Currently, under exclusive use I do approach the 100 Mbps limit (seen a lot of times my laptop transferring files from/to NAS around 14 MBps). But since my devices are capable of handling higher speeds I am thinking to upgrade to a Gigabit switch. That brings me to my question.
If I have 100 MBps router and a Gigabit switch (1k Mac table), what will be max speed between devices connected through the switch?
I am aware anything that goes via the router will hit the roof at 100 Mbps. But will the devices under the switch operate at Gigabit (due to the direct transfer based on mac address)? Or will everything still go through the router who is giving out the IP addresses (the switch having no DHCP) and limit the speed?
View 8 Replies
View Related
Jan 13, 2013
I have netgear WNDR4500 and laptop with Intel Centrino Advanced n-6230. Win 7x64 pro and all run at 54 mb instead of max 400+..I'm fighting with it from a year +/- now and then and I just dont know what to do.
View 5 Replies
View Related
Dec 15, 2012
My N750 F1103 (f/w 1.10.16) LAN speed is limited to 5Mb why? I upgraded my Internet bandwidth to 20Mb+ tested and found it was only 5Mb, the cable company checked a few things and then I did some diagnostics and Isolated to the N750. I have two wired PC and same results with both PC's. This is supposed to have Giga bit LAN not Giggle bit LAN! I'm paying for something I cannot used to its full potential.
View 5 Replies
View Related
Jul 15, 2011
I have two ASUS UL80 laptops and trying to copy files from one to another. I also have a Linksys router with WiFI on.
The speed of a file transfer via router + LAN cable (or only the LAN cable) is about 600KB/s. I tried to turn off firewalls on both PC's, but it increases the speed by only 100KB/s.
View 1 Replies
View Related
Dec 12, 2011
I am using Intel® 82579V, 1 x Gigabit LAN Controller(s) and CAT 6 cable , however my network utilization is limited to 15%- 35%.I know that practical speeds are lower but is there nay way i can increase this throughput , any maximum throughput experience? On a 1Gbps getting 25% Max utilzization is extremely slow.Am i missing soemthing tat needs tobe corrected .I am working on LAn and ocnnected to a server using HP Procure 2810 series switch.
View 6 Replies
View Related
Aug 18, 2011
i have installed a e4200 with a computer connected by Wiffi N300 and two nas connected by Gb LAN. When i copy files from nas to computer or computer to nas the speed is limited between 3 and 7 Mo/s.If i do same whis a Gb switch the speed is up to 30Mo/s.
View 1 Replies
View Related
Dec 4, 2012
I have a Belkin N300 router. When a computer is hard-wired to the router, I get about 26Mbps, but all of the wireless devices in my house are limited to about 56kbps. I tried logging into the router to see if there was something "choking" the connection speed, but nothing really jumped out at me. Is there a setting of some kind that could be causing this?
I do have a signal repeater since my house is so big, but there is nothing within those controls that would seem to have that kind of effect either.
View 14 Replies
View Related
Dec 30, 2011
I posted this in the wired forum, because it's the wired speed that is limited, but it looks like there's more E4200 expertise over here, so here it is again:
I have Hotwire fiber service and the plan is supposed to provide 20 megabit downlink speeds.
I just bought a Linksys/Cisco E4200 to replace an old Dell TrueMobile 2300 from 2004. With that router I got the full advertised downlink speed.
Now, when I run a speed test with the E4200 in place, the downlink speed is only 5168 kbps or so. Watching the speed test meters, I see the data arriving in bursts, every few seconds a whole lot of it gets through, then for a second or two nothing. It's pretty regular.
But, if I run a speed test with the ONT cable plugged right into a laptop, I see 19001 kbps - close enough to 20. This is the same cable that plugs into the back of the router.
With E4200 in place Direct into laptop what I can check or configure in the E4200 to change this behavior?
View 4 Replies
View Related
Feb 17, 2013
Region : France
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.13 build 120405
ISP :
i discovered a speed issue with cable with my router TL-WR1043ND. i have no more than 11 MB/s from computer to NAS... so like all transfer speed was setup like a 100Mbps adapter. my card on my computer is in auto negotiation. If i set it manually to 1Gbps no link is active between router and computer. i tried it with my laptop and once again the same issue.
View 5 Replies
View Related
Sep 4, 2012
Both of these model units apear to have a max Internet downlink speed of about 26 or 27Mbs. I have tested this with 10 different units at 3 different sites where the provided broadband downlink speed is a full 50Mbs, including in my own office. My normal router is a Cisco ASA5505 and I have also connected a Cisco 1840 router and even an old Linksys router and all achieve the full 50MBs speed using a variety of speed test sites. The cable modem at my office and at the other sites have a gigabit LAN connection and the RVS4000/WRVS4400N units certainly should be able to achieve the 50Mbs speed. If this issue can not be resolved, my clients will no doubt want me to install a different manufacturer's unit, which I will do.
View 11 Replies
View Related
Jul 17, 2012
I have an ASUS Z77 Motherboard and when I install the AI Suite II which comes on the installation disc it blocks my internet connection. When I uninstall the software my connection is fine. I am using an Ethernet connection by the way. I think it is being blocked by the component called Network iControl. As soon as that component is uninstalled my Internet connection comes back. I want to have the software, but I also want to have my connection.
View 1 Replies
View Related
Oct 5, 2012
I recently moved into a larger 2 story house, and for the first few months I was using a Linksys E1000 I've had for about 2 years now. It's a fine single band router, but the people upstairs and the xbox/PS3 in the living room didnt have the strongest connection.
I shopped around and finally got a ASUS RT-N66U for a really good, strong dual band router that would supposedly give better range and performance than my old E1000.
Unfortunately, since I got it everyone is having issues they never had before, namely:Signal dropping all around the house and having to search for the network much slower performance than before the xbox/PS3 cant hold a stable connection even for a few minutes now, when before you could watch Netflix HD programs easily
I've upgraded the Firmware to 3.0.0.3.178 since I heard earlier firmwares had issues, but other than that and opening my ports for qTorrent it is relatively stock settings.
View 2 Replies
View Related
Dec 28, 2010
I just discovered that my wireless download speeds are 5Mbps, compared to 16Mbps if my laptop is connected directly to the modem or wired through the router. Uploads are 2Mbps either way. I have a WRT54GS v.6 with firmware version v1.52.8 which I updated today, completed by setting factory default through the router webpage after I discovered this discrepancy. The firmware update did not improve the download speed appreciably, if at all.Should the wireless connection be that much slower than the wired connection through the router? If not, what sort of issues could I be having to account for this?
I did just replace my modem when I discovered I was having erratic speedtests and that corrected that problem. That is when I became aware of the wireless issue, so not sure how long that has been the case. I have Charter's 16/2 HSI, living in a sparsely populated area with solid internet service. There is no external nor internal interference on this 2.4Ghz band.
View 8 Replies
View Related
Nov 6, 2011
I have a Arris DLS with 12 Mbps Download and when I Connect my laptop directly I get the same speed as 12 Mbps but when I do the speed test with my linksys I get only 5 Mbps. How to upgrade to the new WRT54GL or WRT54GS?
View 1 Replies
View Related
Jan 12, 2013
What s the fabric speed (backplane speed) of a Nexus 2232 10G EX?What is the forwarding rate (Mpps) of the same 2232 FEX?
View 6 Replies
View Related
Jan 11, 2011
Recently my desktop has experienced very slow download speeds (~0.11 Mbps), however the upload speed appears to be in line (~2.0Mbps). These numbers are taken from Comcast's speed test (my ISP). It is obviously a problem with my PC because everything else on the network (PS3, Laptop) have great signals with no problems. I just recently reverted the Desktop back to its factory state, and everything was working fine for a couple of months. The desktop in question uses Vista 32-bit and the Belkin Basic USB Wireless Adapter.
View 1 Replies
View Related
Mar 9, 2012
I am using Linksys wirelless G router, will my wired speed on desktop increase when I change to a wirelless N router for laptop and ethernet for wired desk top? I don't need anymore wireless speed but am wondering if I upgrade will my wired desktop pick up more speed.
View 2 Replies
View Related
Jan 24, 2013
On board NIC: Intel 82579V Gigabit Network Controller (asus sabertooth x79 motherboard)I installed the drivers for it from intel's site.f I set link speed to auto (chooses 100mbps full duplex) or 100mbps full or half duplex, any HTTP downloads get slowed to a crawl (30kbps) (steam downloads remain at normal speeds). If I set it to 10mbps full duplex, download speeds jump to normal (500kbps for most HTTP sources)his happens on just this new computer (wired connection), any other computers on the network (wireless) work just fine
View 8 Replies
View Related
Mar 17, 2011
I live in the tampa bay area, I have bright house (BHN) as my service provider, which provides a Road Runner Lightning (40/5) package. I previously used BHN's top tier (20/2) back in July (and prior) with no problems.
After converting to Lightning in August of this year (2010). Of course, BHN (and every other provider) wants to force a modem/router down your throat, so I had them bridge it (in short, turn it into a dummy modem with no routing). I had an SMC branded modem gateway at the time. I work from home 2 days a week (so I can spend more time with my kids during morning, lunch, right after work) and this requires me to use QoS to ensure my VOIP work calls don't get dropped, if the family is watching youtube videos or watching netflex.
My network was as follows SMC Modem >WAN IP>>WAN Port>>D-link DIR-655>>Switch Ports>PC1, PC2, PC3
Everything seemed fine (from a usability stand point) till about 2 weeks ago when my upload speed seemed to grind to halt. Normally I was able to upload about 200-300K per second, and I noticed this dropped to about 45K per second during a drop box upload. First thing I did was power cycle both my modem and router (in the proper/usual order). After they both come up, I start using speed test to find out what my upload speeds were. I was getting about 39Mbps down, but only .56Mbps up still. I factory reset my router.... test, similar speeds. Power cycle all computers (just in case), and then modem/router. Tested, similar speeds. Updated the firmware to the latest. Same issue
Called BHN customer service, they factor reset it, but it wasn't in bridge mode. If I by passed the 655, in factory mode (non bridge mode) upload speeds returned to better than expected states. If I bridged the cable modem, upload speeds seemed to crash.
Had BHN replace the modem, seemed fixed for a day, then issue came back. Had them come back out and replace it again, this time with a Motorolla Surfboard modem... same issue. Fine during factory reset, however after they bridge the modem, upload speeds were fine. Told BHN I would take it from there.. Connected up the DIR-655, and upload speeds crashed again. (.6Mbps). Called D-Link Support, and the Chinese English speaking rep seemed to not be listening to me and tried to have me adjust my MTU as well as Wireless settings. Long story short... the rep was a level 0 id10t and I hope D-link will consider hiring better employees/contractors. So I was all about to give up and replace it with a DD-WRT capable router (which it takes me a lot to want to swap hardware), when I discovered the wan shaping was on. Which I thought to myself... nah... QoS has never messed up before... why would it be the cause. Turned off wan shapping... and voila. Issue seemed to be insta-resolved.
Unsatisfied with that... I decided to dig a lil deeper. I turned on Wan shaping again, but decided to set the settings manually instead of auto detect.
Here are the settings I used... (Advanced Tab>QoS)
Enable Traffic Shaping - Checked
Automatic Uplink Speed - Unchecked
Manual Uplink Speed - 5000
Connection Type: Cable or Other Broadand Network
Enable QoS Engine - Checked Automatic Classification - unchecked (this checked seemed to affect my upload speed by about 5-10% during testing) Dynamic Fragmentation - unchecked (this checked seemed to be the worse enemy for upload speed)
While I know I'm not any network guru (still have to use a subnet calculator for subnetting), I think I did a pretty good job drilling down the issue (once I got passed my service provider replacing modems).
Anyways, I've had overall good luck with D-Link products, even have a 5 port 10/100 switch (all metal) from 1998 that works great. Hopefully, D-Link will just either put more documentation on the web, or hire better employees.
View 3 Replies
View Related
Apr 2, 2011
Are the users' download speeds depend on the hosting company's owner's internet speed? Let say if I was running my own server with my internet speed 1mb and LAN 100mbps, are my clients' download speeds restricted to maximum 1mb of any content from my server?
View 3 Replies
View Related
Aug 13, 2012
I just upgraded my internet plan over the phone from 10mbps to 20mbps + WiFi. Now my connection speed is slower then it was before.
View 2 Replies
View Related
Jun 22, 2011
I noticed that my Asus RT-56U router feels really really hot. It's like the sidewalk on a hot day. I was wondering if it's suppose to be like that or if it's a problem i should worry about.
View 1 Replies
View Related
Jan 3, 2011
I am having the excact same problem, but I have an Asus F3l, which is only a couple of years old - shouldnt the drivers be valid - ie, hasnt WPA been around for some time?
View 14 Replies
View Related
Feb 17, 2013
I currently have a D-Link DIR-615 as my home router, but I've been underwhelmed with its range. Before I go switching stuff around. My D-Link is flashed with dd-wrt, and my RT-10+ would be as well.
My goal would be to increase the range if I could, but not at the cost of dependability. I almost never have to reset the D-Link, but I really don't have any experience with ASUS so I'm not sure where they fall in terms of quality.
View 3 Replies
View Related
May 3, 2013
So my setup has been built around playing nice with my Uverse Gateway. Basically the Router is hooked into a Lan port to the gateway and I have enabled DMZ-Plus to disable the firewall on the gateway's end. Wireless on the gateway has been turned off.
My issue is if I try and plus my Thecus N4100 pro into the router, it doesn't see it at all. The only way I can get my N4100 pro to work is to plug it directly into the gateway with my desktop pc and in that case the gateway wireless has been turned off only my desktop pc see's the nas...
It's definitely not ideal, and I am not sure what to do. I wanted to be able to use this router to do the bulk of the pc related things and only have the gateway handle uverse tv (WAP)...
View 3 Replies
View Related
Feb 29, 2012
I recently bought the above product, the ASUS USB N13 network adapter, and last night when i tried connecting to my wireless router, it worked, but I found that I could only get a maximum on 35% signal, where as my Acer laptop from 2005, receives upto a 100% signal. For a product thats rated at 150m range, distance should not be a problem, I have screen shot if required of the signal strength.
View 4 Replies
View Related
Sep 20, 2012
Readers Digest Version: Worked fine yesterday nothing has change in my connection settings, router settings or server settings. (Computer is located at work in an AD setup, I am first level IT Support here) Router shows as it is getting a connection from the network card which is a Realtek PCIe GBE Family Controller with latest drivers right from realtek (and asus version tried too). But is not connecting at 10/100 or 1000. (Have two connection sources to test to).
What I have tried:
- Tried it on a 10/100 router and a gigabyte switch
- Multiple cat5's
- Performing a clean uninstall of the driver and reinstall both from the Asus and Realtek websites of both drivers.
- Disabling the lan rebooting, enabling he lan and trying to connect.
- Disabling power save multiple times.
- Checking bios for any lan options (which there was surprisingly very little options)
- Latest bios firmware
- Tried changing the duplex to 10/100 for the hell of it!
May try:- Reinstalling windows. I had this problem a couple weeks ago, I went into the bios and enabled PXE boot when into windows and it was suddenly working as usual again. Went back to bios disabled PXE and it was still working fine. I did it again today to no avail....
View 10 Replies
View Related
Feb 19, 2011
when trying to connect it says nodhcpdiscover received sleeping
View 1 Replies
View Related
Jan 28, 2011
what is the router name for Asus F5RL
View 3 Replies
View Related
