I recently bought the above product, the ASUS USB N13 network adapter, and last night when i tried connecting to my wireless router, it worked, but I found that I could only get a maximum on 35% signal, where as my Acer laptop from 2005, receives upto a 100% signal. For a product thats rated at 150m range, distance should not be a problem, I have screen shot if required of the signal strength.
View 4 Replies
I have a WLC 4404. I added a new AP to the network and it is associated with the WLC now. But still its not braodcasting the ssids. I compared the configuration with the ones installed before and configuration is same.
View 9 Replies View RelatedI have tried to put a password on my dlink-615 wireless router, however, this attempt failed and as a result it is no longer picking up the next work signals from my modem.
View 1 Replies View RelatedI have a Wi-Fi booster that can connect to remote distance networks, and I want to share the Wireless Networks that the booster connects to all the local computers in its range (maybe in Ad-Hoc?). The computer that has the booster has it's own separate built-in Wi-Fi.
For example, the booster gets a signal from Wi-Fi network A, and I want Network A to be broadcast to the computers who can't receive Network A's signal. I really don't mind how this is done, preferably without having to buy new hardware.
I have a Wi-Fi booster that can connect to remote distance networks, and I want to share the Wireless Networks that the booster connects to all the local computers in its range (maybe in Ad-Hoc?). The computer that has the booster has it's own separate built-in Wi-Fi. Is this possible in Windows 7 Home Preium?
For example, the booster gets a signal from Wi-Fi network A, and I want Network A to be broadcast to the computers who can't receive Network A's signal. I really don't mind how this is done, preferably without having to buy new hardware.
I am having no end of issues with this router since the upgrade to CCC. I don't want to downgrade because the reason I purchased the router was for the hopeful addition of more apps later on and the CCC.
My router has now suddenly decided to no longer broadcast N signals. My 2.4ghz network is set for mixed and my 5ghz is set for N Only. They are both set to auto channel and WPA2 Personal security and have been working since I purchased the router on Sunday.
Last night it spontaneously rebooted and that was that.
Both laptops (with N adapters) are seeing the 2.4ghz network as 802.11g and my 300Mbps notebook adapter is seeing the 5ghz network as 802.11a. InSSIDer is showing that both networks are now broadcasting at a max of 54Mbps.
I have tried rebooting the router multiple times. I have also tried unplugging it for 60 seconds. I have also attempted to force the 2.4ghz to 20Mhz and a more optimal (unused) channel. That doesn't work. I tried setting the 5ghz network to wide (40mhz) with an optimal channel. Same deal. Still seeing it as 802.11a.
I have an ASUS Z77 Motherboard and when I install the AI Suite II which comes on the installation disc it blocks my internet connection. When I uninstall the software my connection is fine. I am using an Ethernet connection by the way. I think it is being blocked by the component called Network iControl. As soon as that component is uninstalled my Internet connection comes back. I want to have the software, but I also want to have my connection.
View 1 Replies View RelatedI recently moved into a larger 2 story house, and for the first few months I was using a Linksys E1000 I've had for about 2 years now. It's a fine single band router, but the people upstairs and the xbox/PS3 in the living room didnt have the strongest connection.
I shopped around and finally got a ASUS RT-N66U for a really good, strong dual band router that would supposedly give better range and performance than my old E1000.
Unfortunately, since I got it everyone is having issues they never had before, namely:Signal dropping all around the house and having to search for the network much slower performance than before the xbox/PS3 cant hold a stable connection even for a few minutes now, when before you could watch Netflix HD programs easily
I've upgraded the Firmware to 3.0.0.3.178 since I heard earlier firmwares had issues, but other than that and opening my ports for qTorrent it is relatively stock settings.
I have a P5QL-E and i cant get this network adapter to work. I enabled it in BIOS, but nothing happens in win7, driver says i dont have any device isntalled.
View 3 Replies View RelatedI flashed my router to DD-WRT, but I could not access the web UI which is suppose to come on typing 192.168.1.1 in the web browser. . It used to come fine before but I reflashed to Asus Firmware but now I cannot access it. I have tried several times to flashing it to Asus Firmware and Back to DD-WRT, but it didn't work. When I flash to ASUS everytime my old settings are still the same. I tried assigning a static IP also.
View 1 Replies View RelatedI recently built a new PC with an "ASUS PCE-N10" PCIE network adapter. I installed the drivers and everything was secure and nice and fast.
I moved the PC into another room this morning and everything was fine for most of the day. It's stopped working properly though now for some reason.
The connection is much slower and the speed keeps yo yoing and then cutting out. The signal is slightly lower due to positioning but it's still high enough. When it disconnects I use Windows troubleshooter to fix the problem and it says "Wireless Network Connection" doesn't have a valid IP configuration". It usually reconnects me then, but is still slower than it should be and it doesn't last for long.
I've tried connecting to a chosen IP but it just doesn't work. Other computers on the network are fine. Why now? What's happened?
Windows IP Configuration
Host Name . . . . . . . . . . . . : Joe-PC
Primary Dns Suffix . . . . . . . :
[Code]......
Just got the rt-n66u to add to my existing wired network. Can I just disable the DHCP on the 66U and set its IP address to something that's outside the range on my current router?
View 1 Replies View RelatedSome background: We live in a 3-story 3,700 sq. foot home. Office is in bottom front corner of the 1st floor. We have a Linksys WRT54GS router (I know!) paired with a cable modem. We have a desktop wired to the router, a plasma TV across the room connected to the cable and a PS3. We also have an iPad, two iPhones, and a MacBook Air (2012), plus whatever devices guests bring into the house.
We have trouble streaming on devices on 2nd and 3rd floors on the opposite side of house from the office. Plan on adding a NAS in near future, primarily as a local backup and to share pictures, music, movies, etc.Not sure if one of the routers above is the way to go for whole house coverage? Seems like the AC version is probably way beyond our needs, but not sure. Is there a cheaper way to go than either that will still provide the coverage we need for a large house?
So my setup is this.
Modem > Router (ASUS RT-N66U) > Printer, Main Rig, Server, Laptop
I switch the ports between my laptop and PS3 whenever I go to my room, but now that I'm setting up another system downstairs, I'll need more Ethernet ports. Everything is running on a Gigabit network, and I'd like to keep it that way. What I'm thinking is adding this:
[URL]
Do I set it up like this? Modem > Router > Switch > Other Stuff. I'm guessing I only connect one port on my router to the switch, but can I use the other 3 ports on the router or do I have to use the ports on the switch? If what I am thinking is correct, any better recommendation for a switch? I'd prefer a square-rack mount- ish type so I can have my modem and router on top of it.
i use an asus k50c and used to send wireless network connection from it until recently when i upgraded my OS to windows 7 and changed my antivirus to AVG internet security 2011. whenever i try to set up an ad-hoc network, it doesnt prompt me to turn on internet sharing which used to be there before and now no other computer can connect to my network, though it shows on the wireless network list.
View 5 Replies View RelatedI have been hacking at this problem for two days and can not figure it out.I built a new computer ASUS M3A78-T and installed windows 7 64bit everything was working fine. I did not validate the version of windows because I was waiting to replace the 500g hard drive with a 120 ssd. By the time I recieved the ssd windows validation time had expired, I tried to validate the version of windows and I could not because the network adapter was now gone! This is strange because when I first built it it as fine and I was all over the internet via broadband ethernet cable.Now the internet box has a red x and will not recognize the cable and no lights are flashing on the back as well. It seems I ned to reinstall the driver so I used another computer and downloaded the only LAN file from ASUS website and nothing.
View 1 Replies View RelatedI have a new ASUS N53S laptop and cannot get it to connect to an existing Airport Express network. It can connect to other networks.
1. Other machines can connect to the Airport Express network, including a Toshiba Satellite PC, iPhone, and MacBook.
2. The Passkey is valid and works for the devices identified in (2)
3. When entering the valid passkey, the network rejects it and says the passkey is invalid
4. I have opened the Airport Express utility and changed the passkey to a new one, and all of the devices identified in (2) were able to connect -- but the ASUS laptop still cannot connect, the system still rejects it from the ASUS laptop and says "passkey invalid"
my network controller drivers are need to be up dated for asus k53E
View 1 Replies View RelatedMy laptop is unable to connect to my home wifi network after it had ip conflict last night. I tried network troubleshooting it and it always ask me to investigate the router. I tried to reset the modem a few times but my laptop still could not connect to it while my roommates and my phone could. Then I remove my wifi profile and attempt to connect back to the network. However, the same problem persist.My laptop model is Asus A43S and having Windows 7 Home Premium Service Pack 1.
View 4 Replies View RelatedI have a friend who's wireless is not working (it connects but then there is no Internet acces). I understand I can fix this by getting a new wireless driver.
View 1 Replies View RelatedMy laptop normally always works on the wireless network, but every now and then its randomly stopped working and said "identifying network" followed by "could not identify network, unidentified network." When i would troubleshoot it would say stuff about the default gateway and not a valid ip address. THis was fine because it would always just start working on its own in a day or so. However these arnt coming up when i do the troubleshoot this time, and its been over a week and no improvement.Im obviously writing this from the desktop. and the stats below are the desktop stats.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz, Intel64 Family 6 Model 26 Stepping 5
Processor Count: 8
RAM: 6135 Mb
Graphics Card: NVIDIA GeForce GTX 465, 1024 Mb
Hard Drives: C: Total - 953766 MB, Free - 437284 MB;
Motherboard: MSI, MSI X58 Pro-E (MS-7522), 3.0, To be filled by O.E.M.
Antivirus: Trend Micro Titanium Maximum Security 2012, Updated: Yes, On-Demand Scanner: Enabled
I'm trying to connect a Sony Vaio laptop with Windows Vista to my wireless network. It connects to the network just fine but it says "Unidentified network" and I'm unable to surf any websites using any browser. It connects with an ethernet cable just fine and I've already updated the driver for my wireless card.Who is your Internet Service Provider (ISP): Time Warner.What type of Broadband connection are you using: Cable.What is the exact Make and Model of your Modem, Router or Modem/Router Combo: ASUS RT-N56U router / Cisco DPC2100R2 modem.What is the Name of the Anti-Virus, Security or Firewall Software:. [code]
View 19 Replies View Relatedhow to get my servers to run with 2gbs connections on the network. Is it all the same thing just different ways to do it? Some server side, some switch side, some both?In terms of my equipment, I have an Asus RT-N16 router [URL] D-Link DGS-1024D [URL] And (Not hooked up, but i have). Dell 2708 managed switch. [URL]This MOBO (790FX-GD70_[URL] With these NIC's Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) As i said before, id like to trunk/bridge/ w/e you want to call it, so i can get more bandwidth too and from the server.
View 7 Replies View RelatedThe PC I'm using right now was built almost six years ago (ASUS A8N-SLI Premium), but it has dual Gbit NICs. My home file server was built four years ago using an entry level server board (Tyan S5211G2NR) and it also has two Gbit NICs.
I never quite understood how to take advantage of the multiple network interfaces. Can it be done through a standard unmanaged Gbit switch?
I'm building a new desktop, probably using the ASUS P8Z77-V mobo, which has just one NIC.
I am unable to set router's (RT-N56U) IP adress to default one (192.168.1.1), or any other in subnet 1. It always popum message to me which says "IP adress 192.168.1.1 is not a valid adress". Also when I restart device it automaticaly sets its IP to 192.168.2.1. I have static IP which is translated to IP in subnet 1 so I need this working. The router is in "Wireless router mode (Default)"
View 1 Replies View RelatedI am able to connect the other laptops and gaming consoles that we have at the house. My brother's laptop is an Acer Aspire 5520. Whenever I tried connecting to the router. It would sometimes accept my wpa key at the same time it would give me a valid IP Address. But for some reason it says on the connection status "Unidentified Network" What I did was I enabled guest zone. I was able to connect thru a guest account without using any WPA key.
View 1 Replies View RelatedI came home and was unable to wirelessly connect to my secure home network. I can connect to it secure and wired as well as unsecured and wireless, but not secured and wireless. I have done malware scans and checked for driver updates for both my netowrking card and the Linksys WRT54G router firmware...both are good. All of the other systems in the house can wirelessly connect to it while secured, so I've narrowed it down to clearly being a problem with my computer. I am using Vista Home Premium 64 bit on an ASUS G50VT.
View 10 Replies View RelatedI have an ASUS RTN66U running Tomato firmware.I have temporary (a month or so) Internet access via a Huawei E3131 3G USB dongle. I am posting this question using said Internet access.
I would like other machines on my network to be able to access the Internet in the usual fashion. That is, through my ASUS router.My initial thought was to plug the dongle into the router and configure it to connect. However, it seems tomato does not support my dongle because I get a message to that effect in the log.
So my next thought was to "point" my router at my Windows machine which has the dongle plugged into it. Thus, any machine connecting to the router would then route through my Windows machine to the Internet.
So i got the Asus RT-AC66U router and ive setup everything as far as the 2.4 and 5ghz wireless goes. However, for some reason i cannot get my xbox 360 to connect to the wireless network. I tried both the 2.4 and 5ghz network. It sees the network just wont connect. also ive tried to manually add the ip and dns settings to no avail either
View 11 Replies View RelatedMy internet service grinds to all but a halt as soon as I plug in the ethernet cable to my desktop. Nothing is running in the background (that I can determine). Nothing is spamming data up or down (that I can determine). I get 40ms ping and 12Mbps downloads on every device I have until I plug in my big boy; then all the speeds come crashing down to 600ms ping and 0.9-1.4Mbps downloads (including the desktop, I have not been able to play SWTOR for weeks now). It's not the provider, (I thought it was) but I switched from Time Warner to AT&T with the exact same results. ASUS P8P67 Pro; I've had funky issues with USB ports and one SATA port died. Other friends suggest I may have an awful bug and I need to wipe and start over. I wouldn't mind doing that, but I don't have a windows recovery disk (my copy is legitimate).
Mobo-as listed.
CPU- i5-2500k stock, not clocked
RAM- 16GB G.Skill Ripjaws X DDR3 1600
I am unable to connect the Asus PCE-N13 (Windows 7 host) to the WRT610N V1.0 N network. The adapter does not see the N network on the LinkSys but there are other N networks in the list. I have updated the latest drivers. My PC Laptop, Macbook Pro, and Xbox 360 connects to the N network.
View 2 Replies View RelatedThe other day i was on my mums laptop (ASUS X5DIJ) at her house all working fine the battery died so i plugged it in and started it up again however the charger cant have been fully connected and once back in windows the battery died again on the next boot i noticed windows said it had found the system CMOS/real time clock and had installed drivers for it. checked the driver details it says no driver files are required just like it should ever since then it connects to the network but will not connect to the internet at her house or at mine through wireless and ethernet cable although all other computers work fine windows troubleshooter says "Windows could not automatically detect this networks proxy settings"
I've tried
resetting routers and laptop = no change
netsh winsock reset and netsh int ipv4 reset = no change
ipconfig /flushdns = no change
ipconfig /registerdns = no change
[code]....
I have a Asus EeePC 701sd and upgraded to Win 7 Ultimate but I couldn't find any driver for the wireless network adapter
View 1 Replies View Related
