I am unable to set router's (RT-N56U) IP adress to default one (192.168.1.1), or any other in subnet 1. It always popum message to me which says "IP adress 192.168.1.1 is not a valid adress". Also when I restart device it automaticaly sets its IP to 192.168.2.1. I have static IP which is translated to IP in subnet 1 so I need this working. The router is in "Wireless router mode (Default)"
View 1 RepliesI'm trying to connect a Sony Vaio laptop with Windows Vista to my wireless network. It connects to the network just fine but it says "Unidentified network" and I'm unable to surf any websites using any browser. It connects with an ethernet cable just fine and I've already updated the driver for my wireless card.Who is your Internet Service Provider (ISP): Time Warner.What type of Broadband connection are you using: Cable.What is the exact Make and Model of your Modem, Router or Modem/Router Combo: ASUS RT-N56U router / Cisco DPC2100R2 modem.What is the Name of the Anti-Virus, Security or Firewall Software:. [code]
View 19 Replies View RelatedHere's the key background info:
I've got an Asus RT-N56U router. Attached to the router is a USB hard disk with a bunch of music on it. The music is accessible to devices on my LAN over uPnP/DLNA; this works great. My WAN connection is provisioned at 100 Mbps down / 40 Mbps up. I want to use some of that upstream bandwidth to stream my music to myself wherever I happen to be. I could but don't want to leave a server running on my network 24/7 to accomplish this when the router is already able to share the content locally.
So what I want is some way to make the content that the router is already able to distribute across the LAN accessible over the Internet as well. I've looked around but haven't found any prebuilt solutions to this that don't involve hosting the content on a server behind the router, which I'd like to avoid.
The router does have built-in support for serving up the content over FTP, but I've tried that and found that it really does not play well with media players. It kind of works, but the seek time when switching between tracks is absurd, and some tracks just plain fail.
One thought I've had is serving up the content over HTTP by installing an Apache instance on the router (and/or editing the configuration of the built-in instance that provides the configuration portal, if that's possible?). The router appears to run some trimmed-down version of Linux (I can telnet/ssh into it, it has a filesystem, package manager, and similar things).
We have an Asus RT-N56U router at home, which is connected directly to a cable modem. I am attempting to remotely access the router's interface, and am having trouble doing so even after configuring it properly. I configured the router's firewall to allow remote access, using port 8080. I also set up DDNS, although I tried connecting using both the IP and the DDNS name.I also set the router to respond to pings, and I am able to successfully ping the router (from a remote location) using both the DDNS name and the public IP. But when attempting to connect using my browser, it doesn't work. I have tried multiple browsers, multiple remote locations, and disabling my computer's firewall, all with no success.
View 7 Replies View RelatedI use to have a DIR-655 and dap-1522 both worked without any issues. I recently upgraded to Asus RT-n56u and now I want to setup the dap-1522 with it.I have no issues with the Asus RT-n56u everything seems to work fine here the problem seems to be with the dap-1522 where it connects but then disconnects almost instantly.
1) Connect dap-1522 with my desktop computer via Ethernet
2) Change the LAN settings for tcp/ip v4 to manual IP
3) I set the manual IP to 192.168.0.60/ subnet mask 255.255.255.0 and the default gateway to 192.168.0.50
4) I open my web browser and connect to 192.168.0.50 and I see the dlink page and I log in fine.
5)I tried going through the wizard, picked manual and have tried both the 2.4ghz and 5.0ghz bands they are set up as WPA-Auto Personal and I enter in my password. It says settings will be saved
6) The page refreshes to the wireless one but I don't see any options here just the save config one. When I go to status sometimes it says its connected but sometimes it just says it's not I try to unplug from my desktop and take it over to where my apple tv is but it never works..One thing I should note is my asus is connected to 192.168.1.X so do I need to change the dap-1522 to 192.168.1.50? instead of 0.50?
I wanted to know whether Huawei EC159 usb modem is compatible with ASUS router RT-N56U as I want to be sure before going for it..!
View 3 Replies View Related3 times in the last 2 hours i have had my new rt-n56u give me the message.You have set the wrong dynamic or static IP address for your RT-N56U.
So i reset the router and it pulls the same IP and info it had before from my ISP.Doing some reading it seems some people have had this issue occur over and over.I am upgrading to the new Asus1.0.1.8i from 1.0.1.8f which is installed now, but wanted to ask if i have other options for this router as this problem gets annoying..Example i am used to DD-WRT for my linksys wrt- models..does the NT56U have something similar...
I have had the Asus working with a netgear CVG824G(in unison, not bridged) for some time with IP cam & usb media, but no DNS access as running through the netgear gateway. I just upgraded to Optus premium speed pack & received a netgear CG3000 & now can't find the Asus when plugged into CG3000 ethernet port. I have tried to plug it in the same as it was so I could access the asus routers page & change settings to bridge but find nothing. When I try to connect wirelessly to it, the security key is not accepted. Have tried original key and '�dmin'' all with no use. I want it to run bridged to make use of the DNS service with IP cam & attached media
View 3 Replies View RelatedI selected WPA-PERSONAL on the router settings and set a different password for each one.
2.4ghz has a password and 5.0ghz has a different pass.
When I go to my new slim 360 downstairs and try to connect wirelessly, it only shows the 2.4ghz SSID but not the 5.0ghz one. And this goes the same with the laptops downstairs and blu ray players.
I wanted my 360 on a 5.0ghz bandwidth.
I have the printer hooked up to the USB port on the router (Asus RT-N56U), and in the router GUI, it recognizes the printer but when I set the printer up on my computers, they seem to not want to connect, or if they do it won't print anything for a few minutes after clicking "print." Is this just one printer that's going to have issues printing through the router?
I've tried both USB ports, and a couple different cables.USB flash memory works just fine and is quick, like it's plugged straight into a computer.Ironically, I bought this router to replace my file/print server.
i replaced a lightning damaged Linksys router in my home network with the RT-N56U. My main computer is Win7 64, (Phenom II quad, asus M490GTD) , my wife's computer(wired connection, Dell P5Duo) and my work laptop (wireless connection HP core I5) are XP. I have a USB printer attached to the wife's computer and two wireless Squeezebox receivers. This network worked with the old router. With the new router i can access internet from all computers, and connect to the new network with the Squeezeboxes. I cannot print from the main computer, even though the printer shows up in the devices window and the test page spools.
View 4 Replies View RelatedUsing router above cannot access pandora, Sirius, etc. No sites/URLs blocked. All other sites -- except music related sites == ok.
View 1 Replies View RelatedI am unable to connect the Asus PCE-N13 (Windows 7 host) to the WRT610N V1.0 N network. The adapter does not see the N network on the LinkSys but there are other N networks in the list. I have updated the latest drivers. My PC Laptop, Macbook Pro, and Xbox 360 connects to the N network.
View 2 Replies View Relatedi want to give my switch a ip address with same subnet as a pc which is for eg having ip address of class a and subnet of 255.255.240.0
View 4 Replies View RelatedI flashed my router to DD-WRT, but I could not access the web UI which is suppose to come on typing 192.168.1.1 in the web browser. . It used to come fine before but I reflashed to Asus Firmware but now I cannot access it. I have tried several times to flashing it to Asus Firmware and Back to DD-WRT, but it didn't work. When I flash to ASUS everytime my old settings are still the same. I tried assigning a static IP also.
View 1 Replies View RelatedSome background: We live in a 3-story 3,700 sq. foot home. Office is in bottom front corner of the 1st floor. We have a Linksys WRT54GS router (I know!) paired with a cable modem. We have a desktop wired to the router, a plasma TV across the room connected to the cable and a PS3. We also have an iPad, two iPhones, and a MacBook Air (2012), plus whatever devices guests bring into the house.
We have trouble streaming on devices on 2nd and 3rd floors on the opposite side of house from the office. Plan on adding a NAS in near future, primarily as a local backup and to share pictures, music, movies, etc.Not sure if one of the routers above is the way to go for whole house coverage? Seems like the AC version is probably way beyond our needs, but not sure. Is there a cheaper way to go than either that will still provide the coverage we need for a large house?
it is each wireless access point need to have different subnet, if 24 users connect at the same time? will it be slow down if 24 user put in the same network?
View 1 Replies View RelatedMy laptop is unable to connect to my home wifi network after it had ip conflict last night. I tried network troubleshooting it and it always ask me to investigate the router. I tried to reset the modem a few times but my laptop still could not connect to it while my roommates and my phone could. Then I remove my wifi profile and attempt to connect back to the network. However, the same problem persist.My laptop model is Asus A43S and having Windows 7 Home Premium Service Pack 1.
View 4 Replies View RelatedI came home and was unable to wirelessly connect to my secure home network. I can connect to it secure and wired as well as unsecured and wireless, but not secured and wireless. I have done malware scans and checked for driver updates for both my netowrking card and the Linksys WRT54G router firmware...both are good. All of the other systems in the house can wirelessly connect to it while secured, so I've narrowed it down to clearly being a problem with my computer. I am using Vista Home Premium 64 bit on an ASUS G50VT.
View 10 Replies View RelatedI have a high speed wireless DSL router from my ISP (Telus). I use one port off the router to connect directly to my desktop computer. Another port is connected to a switch to which ethernet cables to three other rooms are connected. My problem is that when I connect my Bell PVR (9242) to the 'switched' ethernet cable, I'm apparently not able to get a dynamic ip address, which the Bell unit requires, and can't connect to the network.can I connect another router, in place of the switch, to deliver dynamic IP addresses to whatever I connect to the ports in the other rooms in my house?
View 2 Replies View RelatedI have a sky router (Netgear DG834GT), which i have connected a secound router to which is a D link DIR-615 (with DD wrt firmware D4).I can get access to the sky router remotely without any issues even when changing the port number. its the Dlink router i cannot get access to remotely (within the network i can by typing in the dlink's ip address and works). Main router Sky router IP is 192.168.0.1 - Currently the port number is 8081.Secondary router Dlink IP is 192.168.0.2 (Static ip) - currently the port number is 8080.I have tried to configure the ports but it just dont want to open. Ive tried to open the ports on main netgear and tried all the option my dlink for port forwarding. i must be missing something fundametal here.
View 2 Replies View RelatedI recently installed a new router - WRTP54G . I used to have our 2 machines on a home network. However, that is all gone now. When I open My Network Places on my pc, nothing at all appears. On the other pc only the shared folders on that pc appears. I've tried running the network wizard several times and to no avail. I've checked the permissions and everything else I can think of, but it still doesn't work. I believe it is probably something simple to fix, like checking the right box, but I haven't found it yet. Both machines are running XP Home and I have an external drive attached to my pc. Everything worked fine till the installation of this new router. Should I just create a new network? Would that just be easier? One more thing, I got the error that says Home is not accessible. You might not have permission to use this network resource. Contact admin of this server to find out if you have access permission. The network path was not found. Of course, I am the admin.
View 9 Replies View RelatedAfter trying most things and spending money like water, I still cannot get our home network to be adequate and I am out of options - Tried using two 100MBit/s Netgear routers "bouncing" signal to each other (Wireless Repeating Function). Not ideal as security is small and speed was slow (<10MBit/s) but at least it worked. However these routers had to get pensioned off when we put gigabit ethernet in the office - and the Netgear replacements (a) still have the security limitations with wireless repeating, (b) anyway see to do a worse job of repeating. Tried buying Netgear directional high-gain antennas and directing the signal point to point to a second router - didn't work at all. Tried Powerline (this was in 2008). It sort-of worked but was unreliable and dog slow. I think this is probably not worked by the fact that this building is OLD, most of the wiring is OLD, and anyway the electrical path would take the signal from the 4th floor, down some very old wiring to the ground floor, across a very old switchboard, and back up to the second floor... it's not quite the same as a modern house with modern wiring. Most recently tried using Netgear's Wireless Network Extender. Again, it sort of works, but it's NOT fast at all. In addition there are times when some of our computers using the extension segment of the network are unable to connect - they can still see 3-4 bars of signal, but they cannot get on the network. Appears to be an issue relating to gateway, or DNS, not sure. But I would say about 1 day in 3, when I come home, my wife tells me that the "internet is off".
View 4 Replies View RelatedI've got a relative that needs a wireless solution for their new HD LCD. The spouse has vetoed running cat-5 (I'd have told her to pound sand...) so we're looking for an inexpensive router that we can install dd-wrt on and throw it in bridge mode. The Linksys wrt54g seems to have dried up in the area, no one seems to have one in stock and I haven't had any luck finding an Asus RT-N12 that I can get delivered in a timely fashion, that would have been my second pick.
Any recommendation for a fairly inexpensive G/N router that either features a robust bridge mode or that I can flash for this project?
I am unable to connect my Ipad3 to my home network (WRT160N router). It has been working for the last 8 months, and stopped working after I installed Direct TV App on Ipad..It detects the network, but not accepts the PW.... I have multiple wireless devicess connected to my network without any problems..The funny thing is that my neighbor brings his ipad to my house and he is able to connect..My ipad connects to any other network...just not my home network.. I contacted Apple who spend hours with me on the phone and suggested doing a full reset on the ipad, but still did not solve the problem..I called and already paid for linksys support ($62.95) who spend hours with me on the phone, but suggesting: "maybe you need to buy another router"...REALLY!!!! Again, I have 3 Smart TVs, Xbox360, and Wii, that are connected to the network just fine .even my neibor comes with his Ipad3 and connects to my network just fine......and I can connect with my ipad to any other network without any problems... BTW, I have already removed the DirectTV app from the ipad....but I still cannot connect to my network..
View 2 Replies View RelatedI'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
View 2 Replies View RelatedI try to login to my router http://192.168.1.1/ I try and put in the user name and password that I think it is. Is it the user name and password you set up or one that's already there and if so where can I find it??
View 6 Replies View RelatedI have been using broadband in my laptop using asus wireless router/modem DSL-N10E for last 2 months but with Ethernet cable plugged in. I have never used its wifi function. I tried today but was unable to connect after entering security passwordWhen look for troubleshoot it says "There might be problem with the drivers for the wireless network connection adapters"
View 4 Replies View Relatedi am unable to connect to some lan computers in my office. when i go to start ---> Run ---> \192.168.0.24 or else...(lan computer ip) after 10/15 seconds a popup window comes and says (network path not found). but some systems i can easily access through this procedure
View 12 Replies View RelatedI've problems connecting to my wireless network. i do not face this problem in the past until recently i've some problems with my laptop. after i re-format my laptop, i faced with this problem. here are some of the images i took.
View 11 Replies View RelatedMy internet comes to D-link 655 wireless router from there I have wired connection, one of the connection goes to a switch from this switch I connect wired devices in my office.Another connection from D-link 655 router goes to another wireless router in my living room which is a Linksys router. My few devices and a laptop connects to this router.My problem is I am not able to see the devices connected to my Linksys router from my office devices
View 2 Replies View RelatedI bought an ASUS Black Diamond Dual Band Wireless-N 600 Router (RT-N56U) to upgrade from my older router but I'm having a problem: It won't connect to my cable modem (via the WAN ethernet port), so I can't connect to the internet. [URL]
When I connect the router to my computer via ethernet cable, the light on the ethernet port of the router comes on (an orange LED light), but when I connect my cable modem (or computer) to the the router through the WAN ethernet port, the WAN port's LED does not come on at all and I keep getting an error message on my browser saying that I need to make sure the ethernet cable is connected.
I've tried three different ethernet cables, including the one that came with the router, with no luck (WAN LED lights never come on, so I assume that this means that there is no activity at all). I've also tried cloning the MAC address, restoring to factory default, updating the routers firmware, and holding the reset button on the modem for 15 seconds, among other things.
Also, something that might be worth noting: While one end is connected to my modem, if I plug the ethernet cord into one of the 4 ethernet ports on the router, the green LED instantly turns on but, as I said before, there's no activity when plugged into the WAN port. My modem is an Arris TM052G (DOCSIS 2.0) provided by my ISP, Time Warner Cable.
I have 5 Static Ip pool all IPs are working fine. I have deploy a IIS Server on Windows2008 and configure the Static IP on that server. earlier it was working fine . but since last month the IP is not pinging from Out Side but internal IP Pool its working. I have checked the SERver firewall and another Setting is Ok. if i changed the Ip from the server the new IP is also not pinging.
View 1 Replies View Related