D-Link DAP-1522 :: How To Setup This Router With Asus RT-N56U
Sep 2, 2012
I use to have a DIR-655 and dap-1522 both worked without any issues. I recently upgraded to Asus RT-n56u and now I want to setup the dap-1522 with it.I have no issues with the Asus RT-n56u everything seems to work fine here the problem seems to be with the dap-1522 where it connects but then disconnects almost instantly.
1) Connect dap-1522 with my desktop computer via Ethernet
2) Change the LAN settings for tcp/ip v4 to manual IP
3) I set the manual IP to 192.168.0.60/ subnet mask 255.255.255.0 and the default gateway to 192.168.0.50
4) I open my web browser and connect to 192.168.0.50 and I see the dlink page and I log in fine.
5)I tried going through the wizard, picked manual and have tried both the 2.4ghz and 5.0ghz bands they are set up as WPA-Auto Personal and I enter in my password. It says settings will be saved
6) The page refreshes to the wireless one but I don't see any options here just the save config one. When I go to status sometimes it says its connected but sometimes it just says it's not I try to unplug from my desktop and take it over to where my apple tv is but it never works..One thing I should note is my asus is connected to 192.168.1.X so do I need to change the dap-1522 to 192.168.1.50? instead of 0.50?
View 12 Replies
ADVERTISEMENT
Jun 18, 2013
Here's the key background info:
I've got an Asus RT-N56U router. Attached to the router is a USB hard disk with a bunch of music on it. The music is accessible to devices on my LAN over uPnP/DLNA; this works great. My WAN connection is provisioned at 100 Mbps down / 40 Mbps up. I want to use some of that upstream bandwidth to stream my music to myself wherever I happen to be. I could but don't want to leave a server running on my network 24/7 to accomplish this when the router is already able to share the content locally.
So what I want is some way to make the content that the router is already able to distribute across the LAN accessible over the Internet as well. I've looked around but haven't found any prebuilt solutions to this that don't involve hosting the content on a server behind the router, which I'd like to avoid.
The router does have built-in support for serving up the content over FTP, but I've tried that and found that it really does not play well with media players. It kind of works, but the seek time when switching between tracks is absurd, and some tracks just plain fail.
One thought I've had is serving up the content over HTTP by installing an Apache instance on the router (and/or editing the configuration of the built-in instance that provides the configuration portal, if that's possible?). The router appears to run some trimmed-down version of Linux (I can telnet/ssh into it, it has a filesystem, package manager, and similar things).
View 1 Replies
View Related
Nov 14, 2011
We have an Asus RT-N56U router at home, which is connected directly to a cable modem. I am attempting to remotely access the router's interface, and am having trouble doing so even after configuring it properly. I configured the router's firewall to allow remote access, using port 8080. I also set up DDNS, although I tried connecting using both the IP and the DDNS name.I also set the router to respond to pings, and I am able to successfully ping the router (from a remote location) using both the DDNS name and the public IP. But when attempting to connect using my browser, it doesn't work. I have tried multiple browsers, multiple remote locations, and disabling my computer's firewall, all with no success.
View 7 Replies
View Related
May 29, 2012
I am unable to set router's (RT-N56U) IP adress to default one (192.168.1.1), or any other in subnet 1. It always popum message to me which says "IP adress 192.168.1.1 is not a valid adress". Also when I restart device it automaticaly sets its IP to 192.168.2.1. I have static IP which is translated to IP in subnet 1 so I need this working. The router is in "Wireless router mode (Default)"
View 1 Replies
View Related
Dec 17, 2012
I wanted to know whether Huawei EC159 usb modem is compatible with ASUS router RT-N56U as I want to be sure before going for it..!
View 3 Replies
View Related
Aug 13, 2012
3 times in the last 2 hours i have had my new rt-n56u give me the message.You have set the wrong dynamic or static IP address for your RT-N56U.
So i reset the router and it pulls the same IP and info it had before from my ISP.Doing some reading it seems some people have had this issue occur over and over.I am upgrading to the new Asus1.0.1.8i from 1.0.1.8f which is installed now, but wanted to ask if i have other options for this router as this problem gets annoying..Example i am used to DD-WRT for my linksys wrt- models..does the NT56U have something similar...
View 2 Replies
View Related
Jun 23, 2012
I have had the Asus working with a netgear CVG824G(in unison, not bridged) for some time with IP cam & usb media, but no DNS access as running through the netgear gateway. I just upgraded to Optus premium speed pack & received a netgear CG3000 & now can't find the Asus when plugged into CG3000 ethernet port. I have tried to plug it in the same as it was so I could access the asus routers page & change settings to bridge but find nothing. When I try to connect wirelessly to it, the security key is not accepted. Have tried original key and '�dmin'' all with no use. I want it to run bridged to make use of the DNS service with IP cam & attached media
View 3 Replies
View Related
Sep 24, 2011
I selected WPA-PERSONAL on the router settings and set a different password for each one.
2.4ghz has a password and 5.0ghz has a different pass.
When I go to my new slim 360 downstairs and try to connect wirelessly, it only shows the 2.4ghz SSID but not the 5.0ghz one. And this goes the same with the laptops downstairs and blu ray players.
I wanted my 360 on a 5.0ghz bandwidth.
View 1 Replies
View Related
Apr 16, 2013
I have the printer hooked up to the USB port on the router (Asus RT-N56U), and in the router GUI, it recognizes the printer but when I set the printer up on my computers, they seem to not want to connect, or if they do it won't print anything for a few minutes after clicking "print." Is this just one printer that's going to have issues printing through the router?
I've tried both USB ports, and a couple different cables.USB flash memory works just fine and is quick, like it's plugged straight into a computer.Ironically, I bought this router to replace my file/print server.
View 2 Replies
View Related
Jun 6, 2011
i replaced a lightning damaged Linksys router in my home network with the RT-N56U. My main computer is Win7 64, (Phenom II quad, asus M490GTD) , my wife's computer(wired connection, Dell P5Duo) and my work laptop (wireless connection HP core I5) are XP. I have a USB printer attached to the wife's computer and two wireless Squeezebox receivers. This network worked with the old router. With the new router i can access internet from all computers, and connect to the new network with the Squeezeboxes. I cannot print from the main computer, even though the printer shows up in the devices window and the test page spools.
View 4 Replies
View Related
Aug 19, 2012
I'm trying to connect a Sony Vaio laptop with Windows Vista to my wireless network. It connects to the network just fine but it says "Unidentified network" and I'm unable to surf any websites using any browser. It connects with an ethernet cable just fine and I've already updated the driver for my wireless card.Who is your Internet Service Provider (ISP): Time Warner.What type of Broadband connection are you using: Cable.What is the exact Make and Model of your Modem, Router or Modem/Router Combo: ASUS RT-N56U router / Cisco DPC2100R2 modem.What is the Name of the Anti-Virus, Security or Firewall Software:. [code]
View 19 Replies
View Related
Sep 23, 2011
Using router above cannot access pandora, Sirius, etc. No sites/URLs blocked. All other sites -- except music related sites == ok.
View 1 Replies
View Related
Nov 22, 2011
I turned it on for bridging and it did not auto setup wireless so i need to turn off WPS but my wireless option page is now blank. I rebooted, reset the DAP but still no manual config option. I found I could configure it if I switched it to AP mode but still cannot setup from bridge mode. According to manual a reset does not turn off WPS so what is the answer?
View 1 Replies
View Related
Dec 14, 2011
I'm setting up A DAP-1522 in bridge mode. Network setup went fine. When I went to wireless setup I got a blank page, all white no letters, nothing. I've logged out and back in again with the same results.
View 8 Replies
View Related
Dec 14, 2010
I upgraded the firmware on my newly acquired DAP-1522 from v1.02 to v1.21 (the hardware ver is A1). But weird thing happened after the upgrade--the Setup->wireless network settings portion of the set up menu disappeared! I re-flashed the upgrade once more and it's still not showing. Reboot the AP--same thing!
[url]...
View 6 Replies
View Related
Jan 29, 2013
I have an Asus RT-N65R wireless router, When setting up the 3g USB modem, it asks for the ISP. The ISP isn't listed.
View 1 Replies
View Related
May 20, 2011
I've been playing with this setup for over a month with no real success. I'm trying to use the DAP-1522 as a wireless bridge to provide connectivity to my entertainment center which consist of a PS3, Directv DVR and Internet ready TV. I tried the setup as described in the manual, but not getting to the internet. Initially I was able to connect the 1522 as a bridge, but the connection kept dropping, especially anytime I actually used the internet (downloading a VOD movie). While troubleshooting the dropping issue, I changed all the 1522 settings and now it cannot access the internet at all through. The WNDR3700 is routing my home network fine...it is setup on the 192.168.1.x address space. I understand the 1522 came setup for 192.168.0.x, is the 192.168.1.x/192.168.0.x thing jacking things up? I initially had the 1522 setup with the 192.168.1.x IP from my home network and the gateway set to my WNDR3700 (192.168.1.1)...should it be on the 192.168.0.x? I have updated the firmware to 1.31.
View 2 Replies
View Related
Jan 25, 2011
Can't connect DAP-1522 to my Verizon Fios Router
Went through the setup on the DAP-1522. Selected my Verizon FIOS wireless network and entered the WEP key. Everything looks ok on the status page - except Status: Disconnected
Reset/restarted and reconfigured DAP-1522 several times - same result. Can't get it to connect.
View 1 Replies
View Related
Mar 30, 2012
I am having trouble with a DAP-1522 in AP mode dropping IPv6 packets. It is running in AP mode to supply connectivity to a number of laptops + a 2nd DAP-1522 in bridge mode. The laptops are able to get IPv6 router advertisements from the same wired network the DAP-1522 is plugged into, but they get nothing when connection to the wireless. Tcpdump sees no router adv's coming over the wireless interfaces when sniffing.This appears to be something others have hit as well url...
View 3 Replies
View Related
Mar 30, 2011
We currently use the DIR 655 in our home. I has a great range, and we've never had any problems. Our house is a very tall Victorian, so some areas don't get as strong a signal as others. I'd like to set up a few addition devices to extend the coverage of our network.
I installed a DAP 1522 as a bridge to our entertainment PC. After a while of trying to sort out how to configure it everything is working there. The 1522 is connected to the PC via cable.
I still want to extend the overall wireless range to better cover the lower floors and back porch.
From reading the manual on the 1522 I am a bit confused. I understand how it works as a bridge, connecting devices via cable. Will it also extend the range is set as an Access Point without needing the devices to connect via cable?
View 10 Replies
View Related
Jan 9, 2012
I bought an ASUS Black Diamond Dual Band Wireless-N 600 Router (RT-N56U) to upgrade from my older router but I'm having a problem: It won't connect to my cable modem (via the WAN ethernet port), so I can't connect to the internet. [URL]
When I connect the router to my computer via ethernet cable, the light on the ethernet port of the router comes on (an orange LED light), but when I connect my cable modem (or computer) to the the router through the WAN ethernet port, the WAN port's LED does not come on at all and I keep getting an error message on my browser saying that I need to make sure the ethernet cable is connected.
I've tried three different ethernet cables, including the one that came with the router, with no luck (WAN LED lights never come on, so I assume that this means that there is no activity at all). I've also tried cloning the MAC address, restoring to factory default, updating the routers firmware, and holding the reset button on the modem for 15 seconds, among other things.
Also, something that might be worth noting: While one end is connected to my modem, if I plug the ethernet cord into one of the 4 ethernet ports on the router, the green LED instantly turns on but, as I said before, there's no activity when plugged into the WAN port. My modem is an Arris TM052G (DOCSIS 2.0) provided by my ISP, Time Warner Cable.
View 4 Replies
View Related
Dec 25, 2012
There are three RT-N56U routers in my family. I have one as does my dad and uncle. Bought all 3 about a year ago. They've been rock solid since.
However, my dad has been complaining of network issues, mainly lag and slow response. During Christmas yesterday, I took some time to troubleshoot it which ended in disaster. He was on an older firmware so I had updated it. After the update, the wireless would drop every 5-10 minutes after the router rebooted. I tried rolling back the firmware and there is still the same issue.I reboot the router, wireless comes up and within 10 minutes, the wireless is down.
Most of the clients on the network are iDevices. There are two iPod Touches, 4 iPad Mini's and iPad, two iPhones and an Apple TV, all wireless. Other than that, there is a PS3 and a bunch of wired clients. Looking in the routers logs, it appears that at least one device keeps requesting a DHCP request even though it has an address. Then at some point, the router spits out this error in the log: [code]
That error just keeps counting up, starting at 1 -- Based on google info it's related to wireless drops due to ASUS firmware issue with certain wireless cards. My guess is one of the new devices has a card that they don't support, causing this issue. I was stating to think, since he has so many iDevices on his network, an Airport Extreme?
View 2 Replies
View Related
Apr 17, 2013
ASUS RT-AC66U setup for use with Verizon 4G LTE
View 5 Replies
View Related
Mar 10, 2013
My D-Link DAP-1522 wireless bridge is connected through a single cat5 cable from the LAN port on my PC to the 1st LAN port on the D-link unit. At the moment, it is in bridge mode, with the blue power indicator on, the orange wireless connection light flashing, and the 1st LAN port connection periodically wavering indicating that it is communicating with my PC. When I attempt to configure the DAP-1522 via my internet browser, (IP 192.168.0.50) I get an error saying that the requested webpage does not exist.
View 6 Replies
View Related
Sep 30, 2011
I recently had a networking guy set up a VPN for me, but for it to work properly he had to change all my IP addresses to 192.168.10.xx from 192.168.0.xx. My DAP-1522 (in bridge mode) continued to work but I am unable to log on to it, I think because it's address is 192.168.0.0. I have run into some other issues which makes me think I may need to upgrade the DAP-1522 firmware and/or assign it an address beginning with 192.168.10.xx, however I can't log on to the bridge. (Nor do I know how to change or possible reassign the DAP-1522's address through my router, a DIR-615).
View 5 Replies
View Related
Apr 26, 2011
My problem is two-fold:
1. the DAP-1522 will not connect to the 5GHz network of the DIR-815. Although, this doesn't surprise me as none of my 5GHz-capable devices see it, other than intermittently and at low signal. It is most likely an issue with the 815's 5GHz radio/network.
2. OTOH, the 1522 does appear to connect to the 815's 2.4GHz network just fine. However, there is no Internet access for any of the devices connected to the 1522's ports.
I know the 1522 can work correctly on 2.4GHz, as it previously did fine with my prior 2Wire router from AT&T. (I've just switched to Comcast, using the DIR-815 connected to their SMC modem.)
Also, I know the router and modem work fine (at least with 2.4GHz), as all of my wireless devices connect easily and with screaming bandwidth to the router and Internet.
View 4 Replies
View Related
Mar 12, 2012
I have a WIN XP desktop which I successfully connected to the 1522 AP - as evidence of the GUI to program it. I have the 1522 set to Bridge Mode via the switch on the unit. The 1522 has hardware version B1 and Firmware version 2.000. I joined my wireless network successfully as evidence of the Status page showing it's successfully connected and bridged to my network. I then disabled my USB wifi NIC in hopes of using my hardwired connection to the 1522 to get on the internet.
Wireless Radio : Enabled
Bridge State : Connected
MAC Address : fc:75:xxxxxx
802.11 Mode : Mixed 802.11a, 802.11g and 802.11n
Band Width : 40
Channel : 6
Network Name
(SSID) : cleveland
Wi-Fi Protected Setup : Enabled
Security : WPA2-PSK
View 3 Replies
View Related
Dec 7, 2011
I have dap-1522 version A Browser IE8 with lestest updates.
I downloaded the DAP1522_FW_1.31zip went I try to upload via the 1522 admin error not correct file.
I try three different way to download it, could the file be bad on dlinks web site?
View 4 Replies
View Related
Aug 27, 2010
I have just discovered after three weeks of testing that DAP-1522 wireless bridges are not compatible with all the new Pioneer AVR's that support internet radio and Iphone control. Anytime a DAP-1522 is powered on and on the same subnet mask as a Pioneer receiver it will cause the Pioneer to loose it's connection every 30 minutes. The receiver is then not able to connect unless it is powered off and on again. The DAP-1522 will cause this even if the Pioneer is hardwired to a router and nothing is plugged into the DAP-1522. This affects all new models of Pioneer receivers including the Elite line like I have.
I have tested this with 3 differnet Pioneer receivers and 2 DAP-1522's and always got the same results no matter what the settings were and with the 1522 in AP or bridge mode. Other Pioneer receiver owners experiencing constant disconnect problems on another forum have now also confirmed they have DAP-1522's.....and they are also pissed after spending countless hours troubleshooting.
I talked to Dlink support today and they will not admit to a problem so I can't wait to contact Pioneer tech support on Monday to let them know I have found the reason they are seeing returns on their new receivers (some cost as much as $7K) since many of the new owners like myself are exchanging them thinking they got a bad one. I'm sure Pioneer will test this immediately and force a Dlink fix or turn it over to the FCC.At this point I just wish I could get my money back since I have also already confirmed that a netgear bridge works just fine. Come to think of it, I know Dlink has a new refund policy, but I will check with my state district attorney to see if they can legally keep my money even if the product doesn't work. I don't see anything on the outside of the box with this policy so therfore I wasn't given fair warning of the policy before purchase and would not be expected to know it since it is not industry standard. Let the games begin.
View 14 Replies
View Related
Mar 14, 2012
I just purchased a DAP-1522. The sticker on the bottom says it's a version B1, with firmware 2.0.In the web interface, it says: "Firmware Version : 1.21 , Fri 26 Jun 2009"I downloaded the 2.01 firmware from the D-Link site and when I try to upload it, it says it's not an image file.
View 11 Replies
View Related
Jan 20, 2011
I have bought 1 Dlink Dwl 2100 Access Point about 1 week, it working with ( Default Gateaway 192.168.1.1) but I want connect with 2100Ap But I get Ip from my Livebox Orange.Can I get Ip From 2100Ap (Default Gateway 192.168.0.50), not by LiveBox Orange (Default Gateway 192.168.1.1).My brother live upstair (with LiveBox) I Live ground Floor and connect to Cable Utp cat5 form upstair to ground Floor. In my room I have a Switch connect to 2100Ap.
LiveBox Orange Default gateway is 192.168.1.1
Dlink dwL 2100Ap Default Gateway is 192.168.0.50
My os is windows Xp sp2
View 2 Replies
View Related
Nov 29, 2010
I have a DIR-655 router with a DAP-1522 connected in bridge mode. The firmware on the router is 1.21 and the firmware on the bridge is 1.21. I have my SSID set to broadcast on the DIR-655 with WPA-Personal encryption. When I initially setup the DAP-1522, I was able to access the setup page and connect to the DIR-655. On the status page of the DAP-1522, wireless radio is enabled and status is connected. I connected my XBOX 360, Sony BR player and DirecTV DVR to the wireless bridge and none of them can connect to the internet.
I can wirelessly access the bridge's IP, 192.168.0.50, from any computer connected to the DIR-655 but when I attempt to access the internet on any device connected to the DAP-1522, I do not get a connection. On the XBOX 360 I cannot connect my live account. On the Sony BR player, I get a message that new firmware was found, but when it attempts to connect to the internet to download it, the connection times out. Same occurs when attempting to access the internet on the DirecTV DVR receiver.
View 14 Replies
View Related
May 25, 2012
More that a year ago, with guidance from D-Link Customer Service, I performed setup on a system consisting of a DSL-2640B (with wireless disabled) and a DAP-1522 as an access point. I included the 1522 so as to have an N network, since the 2640 is G. The system works fine and I'm able to stream via the 1522 to an N 300 USB Adapter. Internet access is fine, and I'm able to access the 2640 with no problem.I want to add another 300 in a different location. To do that, I'll need to access the 1522 from my Windows 7 computer, since I've lost the passphrase that I'll need for the 300.Everything that I've read tells me to connect the 1522 directly to my computer via cable and to temporarily change the network adapter settinge to:
IP = 192.168.0.x various sources list values of 2 and 99 for x
Subnet mask = 255.255.255.0
Gateway = 192.168.0.50
Then to use a browser window to go to 192.168.0.50 Regardless of the settings that I use, the browser (IE9) always indicates that it can't connect with that address. accessing the 1522, or on any alternative way to obtain the passphrase.
View 3 Replies
View Related