D-Link DAP-1522 :: IPv6 Router Advertisements Appear To Be Dropped Or Filtered
Mar 30, 2012
I am having trouble with a DAP-1522 in AP mode dropping IPv6 packets. It is running in AP mode to supply connectivity to a number of laptops + a 2nd DAP-1522 in bridge mode. The laptops are able to get IPv6 router advertisements from the same wired network the DAP-1522 is plugged into, but they get nothing when connection to the wireless. Tcpdump sees no router adv's coming over the wireless interfaces when sniffing.This appears to be something others have hit as well url...
View 3 Replies
ADVERTISEMENT
Mar 19, 2011
All 3 previous wireless routers I've had were all LinkSys routers and I had to overcome a learning curve since configuring this DIR-655 is slightly different..What I want to do is allow only the WiFi MAC addresses that I choose to access the network. It seems to me that in order to accomplish this I have to include all of my wired LAN devices' MAC filters as well. I can see having MAC filtering for WiFi devices, however why do I need to add my wired LAN devices MAC addresses? I'm not going to allow just anyone to walk into my home off the street and plug a computer into the network via CAT-5 ethernet cable, so isn't there a way to accomplish just the WiFi allow list and the heck with the wired nodes? The LinkSys routers I used in the past allowed me to allow the MAC filter for WiFi devices only. Is there a way around having to allow all MAC's and just allowing the wifi's?
View 5 Replies
View Related
May 20, 2011
I've been playing with this setup for over a month with no real success. I'm trying to use the DAP-1522 as a wireless bridge to provide connectivity to my entertainment center which consist of a PS3, Directv DVR and Internet ready TV. I tried the setup as described in the manual, but not getting to the internet. Initially I was able to connect the 1522 as a bridge, but the connection kept dropping, especially anytime I actually used the internet (downloading a VOD movie). While troubleshooting the dropping issue, I changed all the 1522 settings and now it cannot access the internet at all through. The WNDR3700 is routing my home network fine...it is setup on the 192.168.1.x address space. I understand the 1522 came setup for 192.168.0.x, is the 192.168.1.x/192.168.0.x thing jacking things up? I initially had the 1522 setup with the 192.168.1.x IP from my home network and the gateway set to my WNDR3700 (192.168.1.1)...should it be on the 192.168.0.x? I have updated the firmware to 1.31.
View 2 Replies
View Related
Jan 25, 2011
Can't connect DAP-1522 to my Verizon Fios Router
Went through the setup on the DAP-1522. Selected my Verizon FIOS wireless network and entered the WEP key. Everything looks ok on the status page - except Status: Disconnected
Reset/restarted and reconfigured DAP-1522 several times - same result. Can't get it to connect.
View 1 Replies
View Related
Sep 2, 2012
I use to have a DIR-655 and dap-1522 both worked without any issues. I recently upgraded to Asus RT-n56u and now I want to setup the dap-1522 with it.I have no issues with the Asus RT-n56u everything seems to work fine here the problem seems to be with the dap-1522 where it connects but then disconnects almost instantly.
1) Connect dap-1522 with my desktop computer via Ethernet
2) Change the LAN settings for tcp/ip v4 to manual IP
3) I set the manual IP to 192.168.0.60/ subnet mask 255.255.255.0 and the default gateway to 192.168.0.50
4) I open my web browser and connect to 192.168.0.50 and I see the dlink page and I log in fine.
5)I tried going through the wizard, picked manual and have tried both the 2.4ghz and 5.0ghz bands they are set up as WPA-Auto Personal and I enter in my password. It says settings will be saved
6) The page refreshes to the wireless one but I don't see any options here just the save config one. When I go to status sometimes it says its connected but sometimes it just says it's not I try to unplug from my desktop and take it over to where my apple tv is but it never works..One thing I should note is my asus is connected to 192.168.1.X so do I need to change the dap-1522 to 192.168.1.50? instead of 0.50?
View 12 Replies
View Related
Jul 21, 2011
I have recently purchased a WD My Book Live and connected to my E4200 Router. I am trying to access this device using FTP from outside my local network. I did all required setting but with no success. I am able to connect to this using FTP from within my Local network. I used nmap to find scan the ports and it says port 21 filtered.
View 9 Replies
View Related
Mar 30, 2011
We currently use the DIR 655 in our home. I has a great range, and we've never had any problems. Our house is a very tall Victorian, so some areas don't get as strong a signal as others. I'd like to set up a few addition devices to extend the coverage of our network.
I installed a DAP 1522 as a bridge to our entertainment PC. After a while of trying to sort out how to configure it everything is working there. The 1522 is connected to the PC via cable.
I still want to extend the overall wireless range to better cover the lower floors and back porch.
From reading the manual on the 1522 I am a bit confused. I understand how it works as a bridge, connecting devices via cable. Will it also extend the range is set as an Access Point without needing the devices to connect via cable?
View 10 Replies
View Related
Feb 14, 2013
Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Comcast
I just upgraded my DLink DIR655 to WDR4300. My VOIP service has worked for the last 5 years. But with WDR4300, I'm frequently experiencing dropped calls. The call will be cut off every 20 seconds or so. This is really a deal-killer.
View 7 Replies
View Related
Mar 11, 2012
We are deploying a new office in the building next to our main office. The main office has a Cisco ASA 5510 behind that is a Cisco 3750 stack. In the new office we are deploying a new Cisco 3750, they will be connected via fiber cable. I have sliced off VLAN 800 as a transit link /30 with an address space of 10.249.249.1-4. The new 3750 only has two VLAN's 800 and 112 (10.112.0.0/24). VLAN 112 routes are advertised to the neighboring 3750 properly as seen in the routing tables of the 3750 stack:
D 10.112.0.0/24 [90/3072] via 10.249.249.2, 00:22:24, Vlan800
Traffic passes between all local VLANS with no issue. I found in order to get packets to pass between the ASA and the new 3750 I had to add a static route to the ASA:
S 10.112.0.0 255.255.255.0 [1/0] via 10.100.0.1, inside
My question is why is EIGRP not advertising the 10.112.0.0 network to the ASA. Here are EIGRP configs on the switches
Existing 3750 Stack
router eigrp 100
network 10.0.0.0
redistribute static
[code]....
View 9 Replies
View Related
Feb 1, 2011
I am using wireless connection and my VPN connection ets dropped all the time. Are there any settings I need to change?I am using juniper networks client. Is there any settings I need to change?
View 1 Replies
View Related
Nov 27, 2011
where my internet dropped alot while playing ps3.i switched from my horrible d-link router to a DIR-655 Since i bought it, i've never dropped but my connection speed is an issue when playing my ps3.I use a wired connection through my router.some periods during the day it's 2 mbps download.. that's really slow considering my computer has 20 mbps download through wired connection.some periods during the day it runs fine @ 4 mbps - 5 mbps download (this is fine for gameplay but it lags a bit)if i directly connect my modem to my ps3 - it goes 20 mbps download (amazing fast speed)I called d-link technical support and did everything from port forwarding to turning on DMZ and putting my ps3 IP in there. I have a 2 part question: is there anything i can do to boost my ps3 connection download speed as high as it would be if it was connected straight to my modem while using a wired connection to my router? if that's not possible, is there anyway i can keep a stable download speed @ 5mbps?
View 4 Replies
View Related
Jun 9, 2012
Despite all the drama regarding the DIR-615, I've had the B2 revision since around late 2008 or early 2009 (can't remember exactly, most likely late 2008) and it had been working flawlessly. And I do mean that. I never once had a problem with this router and highly recommended it. Back then I was on a 24/1 connection, and had been up until recently.
Now I'm on a 100/10 line, and things haven't been looking too great. The internet is stable for the most part, and I am getting full speed, but the router has been starting to drop its connection a lot. I've had to release -> renew (or simply restart the router) quite often now and it seems to be happening at complete random.
weaking with settings, updating firmware, etc but no luck. All connections in question are of course wired, not wireless.
View 7 Replies
View Related
Mar 10, 2013
My D-Link DAP-1522 wireless bridge is connected through a single cat5 cable from the LAN port on my PC to the 1st LAN port on the D-link unit. At the moment, it is in bridge mode, with the blue power indicator on, the orange wireless connection light flashing, and the 1st LAN port connection periodically wavering indicating that it is communicating with my PC. When I attempt to configure the DAP-1522 via my internet browser, (IP 192.168.0.50) I get an error saying that the requested webpage does not exist.
View 6 Replies
View Related
Nov 22, 2012
My home WiFi network security is set up with MAC filtering and WPA-PSK encryptionAll my WiFi devices, ( Laptops, Android, Internet Radio, TV Streamer connect and work ok . However I cannot connect my Ipod to this WiFi network. When I try to connect I get " Unable to Join Network " . When I disable the Mac filtering on my WiFi it connects OK. My router is a Netopia 2247NWG and my Ipod is an Ipod Touch 4th generation running Ios 6.0.1 and is up to date.I've checked and double checked the MAC address in the MAC filtering table and I've deleted it and added it again but to no avail. The easy answer is " Disable the mac filtering, its not needed " but I have a specific reason for using it.
View 3 Replies
View Related
Mar 5, 2011
My DIR-655 drops WiFi connections every few days. All wired connections are fine. Rebooting the router fixes the problem at that time. Cable modem works perfectly fine. [code]
I'm sure I'm missing some devices, but that should give you the general mix of wired/wireless devices that I use. I'm single with visits from my son every other weekend, so network traffic is not that high at my house. I've had this router for a couple years now and didn't use to have this problem. I've been updating the firmware, and I suspect this problem happened after on one those updates. I just don't know which one. Also, I didn't use to have any neighbors with Wireless Routers (that I could detect), but recently there have been 2 who have gotten them. I was hoping this was a problem that D-Link was aware of, but that does not seem to be the case. I would hate to have to go out and buy a new router (not D-Link).
View 14 Replies
View Related
Jan 6, 2013
When I bypassed the router and connect my pc to the cable modem directly, my download and upload speeds are over 20mbps/10mbps. But when I connect my cable modem with the router, it reduced dramatically to under 10mbps/5mbps.So the bottleneck is with the router. How can I troubleshoot the router to remove this bottleneck?
View 14 Replies
View Related
Aug 18, 2011
one last try before boxing up my new DIR-655 and taking it back to Microcenter. I've opened a case via email and got the standard response, below.I have a Dlink DP-300U print server that works fine with my 'old' Belkin router, a F5D-7230-4 wireless unit. Nothing wrong with the Belkin, I'm just getting some service drops from my lousy AT&T ifitl 1.5mbps ISP and thought a new router might work. I actually read the manual (!!) before installing the DIR-655 and even followed it. The print server just isn't visible on the network. Everything else is, though. The 'suggestions' from Dlink tech support below are very useful. If I could 'see' the print server to verify its IP address, we wouldn't be having this conversation. I've rebooted everything, several times and even reinstalled my old Belkin router (which always sees the print server.) And Dlink, no...I'm not interested in paying you $32.95 for up to a half hour to maybe fix a problem caused by your new device. And dropping my call after almost 15 minutes on hold is not cool, either. With reference to the issue you are facing, we suggest you to kindly ensure that the IP address assigned to DP-300U print server is in the same network range as that of your DIR-655.
NOTE: The default IP address of DIR-655 is 192.168.0.1 Once it is done, try to ping the IP address of DP-300U using any of the wired / wireless client connected to DIR-655.note the DP-300U is not currently supported in North America. D-Link offers a premium fee based support line that will be able to support any issues you have with this product.
View 6 Replies
View Related
Sep 30, 2011
I recently had a networking guy set up a VPN for me, but for it to work properly he had to change all my IP addresses to 192.168.10.xx from 192.168.0.xx. My DAP-1522 (in bridge mode) continued to work but I am unable to log on to it, I think because it's address is 192.168.0.0. I have run into some other issues which makes me think I may need to upgrade the DAP-1522 firmware and/or assign it an address beginning with 192.168.10.xx, however I can't log on to the bridge. (Nor do I know how to change or possible reassign the DAP-1522's address through my router, a DIR-615).
View 5 Replies
View Related
Apr 26, 2011
My problem is two-fold:
1. the DAP-1522 will not connect to the 5GHz network of the DIR-815. Although, this doesn't surprise me as none of my 5GHz-capable devices see it, other than intermittently and at low signal. It is most likely an issue with the 815's 5GHz radio/network.
2. OTOH, the 1522 does appear to connect to the 815's 2.4GHz network just fine. However, there is no Internet access for any of the devices connected to the 1522's ports.
I know the 1522 can work correctly on 2.4GHz, as it previously did fine with my prior 2Wire router from AT&T. (I've just switched to Comcast, using the DIR-815 connected to their SMC modem.)
Also, I know the router and modem work fine (at least with 2.4GHz), as all of my wireless devices connect easily and with screaming bandwidth to the router and Internet.
View 4 Replies
View Related
Mar 12, 2012
I have a WIN XP desktop which I successfully connected to the 1522 AP - as evidence of the GUI to program it. I have the 1522 set to Bridge Mode via the switch on the unit. The 1522 has hardware version B1 and Firmware version 2.000. I joined my wireless network successfully as evidence of the Status page showing it's successfully connected and bridged to my network. I then disabled my USB wifi NIC in hopes of using my hardwired connection to the 1522 to get on the internet.
Wireless Radio : Enabled
Bridge State : Connected
MAC Address : fc:75:xxxxxx
802.11 Mode : Mixed 802.11a, 802.11g and 802.11n
Band Width : 40
Channel : 6
Network Name
(SSID) : cleveland
Wi-Fi Protected Setup : Enabled
Security : WPA2-PSK
View 3 Replies
View Related
Dec 7, 2011
I have dap-1522 version A Browser IE8 with lestest updates.
I downloaded the DAP1522_FW_1.31zip went I try to upload via the 1522 admin error not correct file.
I try three different way to download it, could the file be bad on dlinks web site?
View 4 Replies
View Related
Aug 27, 2010
I have just discovered after three weeks of testing that DAP-1522 wireless bridges are not compatible with all the new Pioneer AVR's that support internet radio and Iphone control. Anytime a DAP-1522 is powered on and on the same subnet mask as a Pioneer receiver it will cause the Pioneer to loose it's connection every 30 minutes. The receiver is then not able to connect unless it is powered off and on again. The DAP-1522 will cause this even if the Pioneer is hardwired to a router and nothing is plugged into the DAP-1522. This affects all new models of Pioneer receivers including the Elite line like I have.
I have tested this with 3 differnet Pioneer receivers and 2 DAP-1522's and always got the same results no matter what the settings were and with the 1522 in AP or bridge mode. Other Pioneer receiver owners experiencing constant disconnect problems on another forum have now also confirmed they have DAP-1522's.....and they are also pissed after spending countless hours troubleshooting.
I talked to Dlink support today and they will not admit to a problem so I can't wait to contact Pioneer tech support on Monday to let them know I have found the reason they are seeing returns on their new receivers (some cost as much as $7K) since many of the new owners like myself are exchanging them thinking they got a bad one. I'm sure Pioneer will test this immediately and force a Dlink fix or turn it over to the FCC.At this point I just wish I could get my money back since I have also already confirmed that a netgear bridge works just fine. Come to think of it, I know Dlink has a new refund policy, but I will check with my state district attorney to see if they can legally keep my money even if the product doesn't work. I don't see anything on the outside of the box with this policy so therfore I wasn't given fair warning of the policy before purchase and would not be expected to know it since it is not industry standard. Let the games begin.
View 14 Replies
View Related
Mar 14, 2012
I just purchased a DAP-1522. The sticker on the bottom says it's a version B1, with firmware 2.0.In the web interface, it says: "Firmware Version : 1.21 , Fri 26 Jun 2009"I downloaded the 2.01 firmware from the D-Link site and when I try to upload it, it says it's not an image file.
View 11 Replies
View Related
Jan 20, 2011
I have bought 1 Dlink Dwl 2100 Access Point about 1 week, it working with ( Default Gateaway 192.168.1.1) but I want connect with 2100Ap But I get Ip from my Livebox Orange.Can I get Ip From 2100Ap (Default Gateway 192.168.0.50), not by LiveBox Orange (Default Gateway 192.168.1.1).My brother live upstair (with LiveBox) I Live ground Floor and connect to Cable Utp cat5 form upstair to ground Floor. In my room I have a Switch connect to 2100Ap.
LiveBox Orange Default gateway is 192.168.1.1
Dlink dwL 2100Ap Default Gateway is 192.168.0.50
My os is windows Xp sp2
View 2 Replies
View Related
Nov 29, 2010
I have a DIR-655 router with a DAP-1522 connected in bridge mode. The firmware on the router is 1.21 and the firmware on the bridge is 1.21. I have my SSID set to broadcast on the DIR-655 with WPA-Personal encryption. When I initially setup the DAP-1522, I was able to access the setup page and connect to the DIR-655. On the status page of the DAP-1522, wireless radio is enabled and status is connected. I connected my XBOX 360, Sony BR player and DirecTV DVR to the wireless bridge and none of them can connect to the internet.
I can wirelessly access the bridge's IP, 192.168.0.50, from any computer connected to the DIR-655 but when I attempt to access the internet on any device connected to the DAP-1522, I do not get a connection. On the XBOX 360 I cannot connect my live account. On the Sony BR player, I get a message that new firmware was found, but when it attempts to connect to the internet to download it, the connection times out. Same occurs when attempting to access the internet on the DirecTV DVR receiver.
View 14 Replies
View Related
May 25, 2012
More that a year ago, with guidance from D-Link Customer Service, I performed setup on a system consisting of a DSL-2640B (with wireless disabled) and a DAP-1522 as an access point. I included the 1522 so as to have an N network, since the 2640 is G. The system works fine and I'm able to stream via the 1522 to an N 300 USB Adapter. Internet access is fine, and I'm able to access the 2640 with no problem.I want to add another 300 in a different location. To do that, I'll need to access the 1522 from my Windows 7 computer, since I've lost the passphrase that I'll need for the 300.Everything that I've read tells me to connect the 1522 directly to my computer via cable and to temporarily change the network adapter settinge to:
IP = 192.168.0.x various sources list values of 2 and 99 for x
Subnet mask = 255.255.255.0
Gateway = 192.168.0.50
Then to use a browser window to go to 192.168.0.50 Regardless of the settings that I use, the browser (IE9) always indicates that it can't connect with that address. accessing the 1522, or on any alternative way to obtain the passphrase.
View 3 Replies
View Related
Feb 14, 2012
My DIR 655 router quit working and so I called D link. She had me reset the ip to 192.168.5.x. So now my dap1522 is not connecting to the 655. I connected the dap1522 to my laptop via ether-net and typed in dink, and got nothing, then put in default ip for the 1522 and still nothing. I also tried ip scanner and it would not come up.
View 1 Replies
View Related
Jan 10, 2012
my config : one DAP-1522 as an AP + one DAP-1522 as a switch, 6 meters between them, signal strength about 70. Any others wifi networks around my house. both with FW140b03.bin dated 01/14/2011.Most of the time, both work correctly. But time to time, the wifi link is ko. In AP status, the switch is mentionned connected (uptime = 3 hours ...). The red led is blinking on the switch. The administration web of the switch is not available and the link is ko. Unplug and plug power units doesn't fix the problem. I need to reset DAPs.From Dlink experts, i would like to get more description about issues :
- in switch mode, which are the events modifying the red led state ? what does blinking / off led mean ?
- in AP mode, what does "uptime ...STA ...." mean ? frames are periodically received from STA ?
View 7 Replies
View Related
Aug 8, 2011
Will the dap-1522 work with 3d video ie; from a 3d Blue Ray Player? I am upgrading system to an LED Samsung 3D TV and Samsung 3d Blue Ray Player. I know that HDMI 1.4 cables will work but am looking at the wireless option.
View 1 Replies
View Related
Jan 27, 2012
I notice that I have TX Packets Dropped only under the wireless section.This occurs when the wireless network is not in use also.I have tried many different channels, almost all of them.Im using wpa2-tkip+aes, mixed g and n network, auto 20/40, wps disabled.I understand about wireless interference also.wireless devices dont seem to have any issues though, not dropping from network.I usually get 4000 wireless TX drops a day. LAN and WAN show No TX drops
View 11 Replies
View Related
Mar 30, 2011
I've been having a number of issues with performance on my DIR-655 with streaming media, internet connection being dropped and random reboots. Over the last couple of weeks it has been getting worse, to the point where I'm about to act out the printer scene from Office Space but with my DIR-655! It has been rebooting, completely killing WiFi networks and Internet Connection, almost every 20 minutes when I'm watching DivX over the network. The relevent information about my network is as follows:
-Hardware:
-D-Link DIR-655
-Hardware Version: A3 (US) , Firmware Version: 1.34NA
As an experiment I reconfigured the DSL-380T into PPPOE mode and set the DIR-655 into DHCP Client. This was over 2 hrs ago. So far - no random reboots, no jittering on the Media Center Extender playing videos, no internet drop outs..It seems to me that the DIR-655 doesn't cope well when it has to do the PPPOE network protocol as well as the routing, WiFi and other basic functionality that it should be able to cope with.I'll leave it running as it now is and report back later, but from the dramatic change in behavior I'm hoping that I've finally cracked my perf issues with the DIR-655.
View 1 Replies
View Related
Jan 13, 2011
For those of you foolish enough to upgrade to your firmware to 1.35NA, only to find that all your wireless clients are intermittently dropped randomly at the same time, read on.At the time of this simultaneous drop, the logs will tell you that the clients were "disconnected due to deauthorisation" or some such (precise wording eludes me, has not occurred for a while, which is a good thing!). The clients are then quickly "authorised", but the movie you were streaming to your living room has already been interrupted and all your family members have gone for an unexpected toilet / snack break. Needless to say, the movie is ruined. Playing/hosting online games is an exercise in slowly pulling out all your remaining hair folicles. A random 20s delay when surfing the web is also fun. The list goes on.
A quick glance at the forum suggests this is a common problem, with the only reproducible solution to downgrade your firmware, perhaps all the way to 1.21.Get this though, you cannot downgrade 1.35NA by any means known to us internet-using, neanderthal-descendant primates (yes, your ancestor interbred with them). All workarounds to downgrade the firmware currently do not work for the new firmware.Why this is not suggested more often on these forums, I cannot fathom. There are a few threads that end like this though: "Oh, switched to WPS and the problem went away.Of course, if your wireless clients do not support WPS, then, um...facepalm yourself again. Only one of them has to though, the rest non-WPS clients you can copy paste the extremely long password to.Not so important settings: (changing these will do nothing to alleviate the drops)
Now that I have provided you with the meaning to life, the universe, and everything (42, I mean WPS), enjoy "normal" wireless behaviour again. OMG, I can actually surf the internet, torrent, play games, stream movies again.Some far more knowledgeable person might speculate as to the reason why this is so...actually, I will start the useless speculation. There must have been a security issue, that was remedied with the more recent 1.3xx firmwares. At the same time, constant authorisation checks were added. The deauthorisation/ authorisation cycle is snappy and unnoticeable with WPS, yet horrible without WPS.
View 12 Replies
View Related
May 31, 2012
I have two XPS 15 (L502x) laptops (purchased in March '12) with Intel Wifi link 1000 BGN adapters. On a regular basis both laptops lose their connection to the internet (via FIOS), at the same time. I'm convinced that is not FIOS or my router. I have a Dell STUDIO 8100, an iPhone and iPad, and these wireless devices do not lose their connections. Sometimes I'm able to resolve the issue by using "troubleshooting" via the adapter, often restarting the laptop and/or the router is the only way to resolve my problem. I've run the Dell Support software, it indicates no drivers are available for update, so I assume I'm current.I've read about turning off 802.11n, I've read about problems w/ power management and conflicts with wireless.
View 10 Replies
View Related
