D-link Dir-655 :: Mac Filtering - Only Want Wifi Filtered / Not Wired Lan Nodes

Mar 19, 2011

All 3 previous wireless routers I've had were all LinkSys routers and I had to overcome a learning curve since configuring this DIR-655 is slightly different..What I want to do is allow only the WiFi MAC addresses that I choose to access the network. It seems to me that in order to accomplish this I have to include all of my wired LAN devices' MAC filters as well. I can see having MAC filtering for WiFi devices, however why do I need to add my wired LAN devices MAC addresses?  I'm not going to allow just anyone to walk into my home off the street and plug a computer into the network via CAT-5 ethernet cable, so isn't there a way to accomplish just the WiFi allow list and the heck with the wired nodes?  The LinkSys routers I used in the past allowed me to allow the MAC filter for WiFi devices only.  Is there a way around having to allow all MAC's and just allowing the wifi's? 

View 5 Replies


ADVERTISEMENT

Linksys Wireless Router :: Can't Ping Between Wired Nodes On E2000

Jan 11, 2011

Just replaced my older Cisco router with an E2000 and now none of the connected PCs can ping each other.   I have two wired and two wireless nodes on the 192.168.1.X subnet (defaults) using DHCP.  All nodes can access the Internet with no problems, but none of them can see each other -- no ping, no Network Neighborhood, nothing.   Since this all worked fine before I swapped routers and I've made no changes on any of the nodes, I presume this is something about the router.
 
I've tried all the usual troubleshooting steps (spent 10 years working as Systems Engineering in IP networking) - no luck.   I've also tried various settings of the router (e.g. turned off SPI) but no luck either.
 
my new router doesn't block connections between attached PCs on the same subnet ....
 
P.S.  One strange observation : using Wireshark I can see the pinging node (.137) ARP for the destination IP (.102), and the ARP reply is sent by the destination node (.102) , but it looks like the Echo Request never makes it to the target machine -- i.e. I think the router is blocking it.

View 9 Replies View Related

Cannot Connect Ipod To Wifi ( Mac Filtered )?

Nov 22, 2012

My home WiFi network security is set up with MAC filtering and WPA-PSK encryptionAll my WiFi devices, ( Laptops, Android, Internet Radio, TV Streamer connect and work ok . However I cannot connect my Ipod to this WiFi network. When I try to connect I get " Unable to Join Network " . When I disable the Mac filtering on my WiFi it connects OK. My router is a Netopia 2247NWG and my Ipod is an Ipod Touch 4th generation running Ios 6.0.1 and is up to date.I've checked and double checked the MAC address in the MAC filtering table and I've deleted it and added it again but to no avail. The easy answer is " Disable the mac filtering, its not needed " but I have a specific reason for using it.

View 3 Replies View Related

D-Link DAP-1522 :: IPv6 Router Advertisements Appear To Be Dropped Or Filtered

Mar 30, 2012

I am having trouble with a DAP-1522 in AP mode dropping IPv6 packets.  It is running in AP mode to supply connectivity to a number of laptops + a 2nd DAP-1522 in bridge mode. The laptops are able to get IPv6 router advertisements from the same wired network the DAP-1522 is plugged into, but they get nothing when connection to the wireless.   Tcpdump sees no router adv's coming over the wireless interfaces when sniffing.This appears to be something others have hit as well url...

View 3 Replies View Related

D-link Dir-825 :: Connecting Wired To Get Wifi Via Wan And Lan Ports

Jan 12, 2013

1.) I don't have a wireless card in my PC, so I will be connecting wired to get WiFi via WAN and LAN ports, right? I have a Windows 7 32-bit desktop PC. We are working with a DSL modem residential line without phone line using a coaxial cable, and Ethernet cable from modem into the PC. provide step by step walk through instructions by connecting this D-link router to my modem and WiFi, and for me to use the WPA2 security?

2.) I have an iPhone 4 with Verizon. If I want to use my iPhone to get WiFi from the router, and turn off the Internet, and use WiFi only on my phone, how would this work?

View 14 Replies View Related

Linksys Wireless Router :: Wired MAC Filtering On E4200?

Aug 10, 2011

I see on the control panel that there is MAC filtering for the wireless connections. I don't see a similar control panel for computers that are wired directly to the router. Where do I find this?

View 3 Replies View Related

Linksys Wireless Router :: E1000 / MAC Address Wired Filtering?

Jan 19, 2011

I just want to allow specified computers wired access to the internet via the E1000 router.  Here is the problem I am currently working on: 

(1)   Setup the E1000 unit to allow only one PC 'C1' (MAC: 91:E6:BA:25:91:58) wired access to the internet.

(2)   Add another PC (unknown MAC address) to the LAN side of the E1000 unit and see if it is being blocked by the 'Access Restriction' policy that was setup.  

(3)   Can’t get the above done – the second PC is able to surf the internet although the policy is enabled. 

Notes:(a) Ref: 'Access Restrictions' web page or see Page 26 in the User Guide .(b) The unit has the latest firmware already installed: Firmware Version: 2.1.01 build 5Dec 3, 2010.(c) The internet port of the unit goes to the ADSL modem in my house.(d) Unplugged the unit for 10 seconds as advised by one of your technicians, still no difference.(e) I can deny PCs, but the allowing only specified ones seems not to be doing anything.By the way, can the E3000 or E4200 do the above?

View 9 Replies View Related

Tp-link 300mbps Wireless :: Tl-wr1043nd / Very Slow Connection (wired 57mbits / Wifi 4mbps)

Mar 27, 2013

Region : Belgium
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Telenet

I've just bought a TP-Link TL_WR1043ND and when I was configuring the wireless settings first I had a +- 40Mbps connection,a little later the connection dropped to 4Mbps and was constantly dropping the speed.Sometimes it went to 15Mbps and then it drops back to 4Mbps.Right now its only 1Mbps.

Configuration:

Wireless channel: 11
Mode: 11bgn mixed
Channel width: Auto
Max tx rate: 300Mbps
Wireless router radio and SSID broadcasting enabled

[code].....

View 1 Replies View Related

Can't Connect Xp Laptops To Wifi With Mac Filtering On

Mar 20, 2012

I have a Linksys WRT120N and two XP laptops.I can connect them to my network when MAC filtering is disabled but as soon as I re-enable it, the network kicks them off.I've had the network set to broadcast enable and disabled and it doesn't matter. There is NO WPA2 etc security or password on the network.I've checked, double-checked and quadruple-checked the MAC addresses of both laptops (using "ipconfig /all") and they're both right. I entered them correctly and I've quadruple-checked that I've checked "PERMIT" instead of "PREVENT". The funny thing is that I also have a Samsung Galaxy SII and that connected right to the router even WITH MAC address filtering on. It was unbothered the entire time I was enabling and disabling things. It kept streaming web radio the entire time.

One of my laptops is set to use Windows to configure my wireless networks and one uses Intel ProSet/Wireless to manage connections.Neither one can connect when MAC filtering is on... but my phone connects just fine.where someone asks this question ends up in people arguing about why MAC filtering is worthless or perfectly valid or whatever and the anti-MAC filtering person telling the asker to get some "real" security and stop wasting their time.

View 3 Replies View Related

D-Link DIR-601 :: Mac Filtering Not Working

Oct 15, 2010

I tried to find an answer to my issue however came up short. Did find,url... but that for a 600 not 601. I have "Mac filtering on and to only ALLOW the addresses below" however, it allows any computer, even if i do not have them listed.

View 3 Replies View Related

D-Link :: DIR 500 Filtering Websites

Jul 12, 2012

I have dlink dir-600 router and I want to block access to website [ URL] for only one PC connect to router. i can either block web access to both PCS connected or block entire web access to one PC.

View 1 Replies View Related

Cisco Firewall :: ASA 5505 URL Filtering Using URL Filtering Server?

Feb 7, 2012

I have come across articles mentioning that URL  Filtering can be implemented by using ASA 5505 with URL Filtering  Servers. But Websense and other Web Filtering Servers are paid ones ?  Are there any free solutions available ? What exactly is N2H2 ? The  reason is I don 't want to increase the CPU utilization of ASA by  implementing URL filtering within the device. If I have around 30 nodes  which connects to the internet via a 2Mbps line through ASA 5505 and if I  want to block around say 10 or 15 URLs , will it increase CU  utilization beyond permissible limits ? Currently the CPU Utilization is  around 10 - 15 . Here's the infrastructure setup .

------------------------------------------------------------
Nodes -->Switches-->ASA 5505-->Internet
-------------------------------------------------------------

View 4 Replies View Related

Routers / Switches :: Communication Administratively Filtered Error?

Aug 9, 2012

I have 2 different network topology - network A and network B Both of them are connecting to the same gateway (a firewall) to the net. they're using the same range of public IP pool to NAT the private IPs. in shorts, all setup is almost the same except the devices' brand between A and B.I have no problem to access the webpage using network A. But whenever I attach the same laptop to network B, the same page won't display at all.I've done wiresharking to network B and the result shows "ICMP destination unreacheable (Communication administratively filtered)" which reported by unknown device (suspected to be the webpage's gateway).

View 5 Replies View Related

D-Link DIR-655 :: Turn NAT And Endpoint Filtering Off?

Feb 12, 2011

My network is set up in the following way..

DSL-320B | Linksys E3000  192.168.0.0/24 Subnet A Static Route 192.168.1.0 255.255.255.0 192.168.0.100 | Wan Port 192.168.0.100 DIR-655 | DIR-655     192.168.1.0/24 Subnet B

I am unable to browse by IP any machines on Subnet B from Subnet A and suspect this is due to the NAT and the Endpoint filtering within the DIR-655.

View 2 Replies View Related

D-Link DIR-655 :: Website Filtering Not Working?

Jan 17, 2011

It seems (and should be) pretty straight forward; under ADVANCED go to WEBSITE FILTERING and enter in the URI, or partial URI, that you want blocked and make sure the drop-down menu is "DENY computer access to ONLY these websites".  The only problem is, I can still get to all of them. I saw in another forum that you had to check "Enable Access Control" and go through a 6-step process where you specify machines - I truly hope that isn't the solution, because it's needlessly complicated for most users who only want to block ALL devices on their network from accessing certain sites. My Hardware Version is B1 and my Firmware version is 2.00NA.

View 2 Replies View Related

Distance Between Two Wireless Mobile Nodes?

Oct 13, 2012

I am currently trying to find the method or mechanism for calculating the distance between two wireless mobile nodes.Let's say, there are 2 nodes (node B and C) coming in communication with node A. How can node A knows whether node B or node C is nearer than the other? Is it possible to find it out by using RSSI? or are there any other mechanisms to calculate the distance?

View 1 Replies View Related

D-Link DIR-825 :: How To Enable SPI Firewall And Wireless MAC Filtering

Jan 23, 2013

Where on my router interface I could go to enable both the SPI Firewall, and the Wireless MAC Filtering? I have the D-link DIR-815.

View 1 Replies View Related

D-Link DIR-600 :: Doesn't Allow To Enable Wireless MAC Filtering

May 20, 2011

DIR600 doesn't allow me to enable wireless MAC filtering when I setup DIR600 as access point. (I connected DIR600 (access point) to my another room's router.)

View 1 Replies View Related

D-Link DIR-600 :: Configure Firewall UDP Endpoint Filtering?

Jul 10, 2011

 I would like to know how to configure my DIR-600s firewall UDP Endpoint Filtering. I ve read some guides and I ve got to configure this to Endpoint Independent in order to play League of Legends. The problem is that I can see the option Firewall & DMZ but then I don't see the UDP or TCP Endpoint Filtering options.

View 1 Replies View Related

D-Link DIR-655 :: Network Filtering / 24 MAC Address Limit?

Jan 23, 2013

I have had a great experience with my old DIR-655 (rev A) router.  However, I would like to upgrade to a newer and better D-link router for my home that contains many well-connected children. Which routers are like my DIR-655, and have better overall performance than the DIR-655 without necessarily using the benefit of the 5 GHz second band.   What better performing routers can record more than 24 MAC addresses in the Network Filtering area?  I understand many people don't agree with MAC address filtering, but I like it to keep my kids from giving out my network password to all the neighbor kids and their friends too.  So, MAC address filtering works for me.  Or, should I just get an updated version of the DIR-655?  

View 5 Replies View Related

When Nodes Send Data Through A Switch Does It Become Encrypted

Dec 1, 2012

Packet Sniffing is mainly used on non-switched networks to display data that was supposed to be sent to nodes other than yourself, allowing you to see information such as usernames and passwords etc.My question is, why can this technology not be used as easily on a switched network? When nodes send data through a switch does it become encrypted?

View 6 Replies View Related

Cisco :: Maximum Nodes For 1524SB LWAPP AP?

Mar 21, 2012

Someone has mentioned only 25 nodes are supported by the 1524SB and that one AP gets bogged down by 20 nodes or more. 

View 0 Replies View Related

Does Mixed Powerline AV 500 And 200 Network Slow Down 500 Nodes

Aug 30, 2011

I have two netgear powerline AV 500 ethernet adapters that give me near ideal internet access on my media computer (FIOS 25/25mpbs tests out at 8ms 25.4/24.7) and perhaps 100-140mbps to my router, printer, drive, etc. I now want to add a few wifi points and instead of having the mess of a powerline adapter + a wifi router I think it will be neater to have an all in one solution. Most of the ones that I find are 200mbps, however. I know that 500 is backwards compatible, but will a mixed solution slow everything down like it can for a mixed wireless g/n network?

View 2 Replies View Related

D-Link DIR-655 :: Web Filtering Doesn't Work When Linked To MAC Address

Jan 5, 2011

My DIR-655:
Hardware Version: A4
Product Page: DIR-655

The problem is that Website Filer doesn't work if on STEP 3: SELECT MACHINE of Access Control the machine was selected by MAC address. When the machine was selected by IP everything is fine.The problem is that IP addresses are assigned dynamically, so how to make sure that the policy would be applied to the same machine? 

View 8 Replies View Related

D-Link DIR-825 :: MAC Filtering Blocks Allowed Devices After Several Hours

Jan 28, 2012

I have yet another problem now with the DIR-825.  I have a DAP-1522 that I connect my multimedia devices to like my TV, BD player, etc.

For added security, I use MAC filtering to only allow access to my devices that connect to my router.  However, after several hours, the devices connected to my DAP-1522 can no longer connect and neither can I connect to them.  The odd thing is that I can connect just fine to the 1522 itself.  I NEVER had this issue with the DIR-655 so I figured it had to be the 825.  After trying several things, I essentially narrowed it down to the MAC filtering.

If I turn MAC filtering off everything works fine all the time.  If I turn it on, everything works fine for several hours, even up to a whole day, but then eventually my devices can no longer see or be seen.

View 14 Replies View Related

D-Link DIR-655 :: MAC Filtering / Network Filter And Guest Zone

Jul 22, 2012

207.NA Firmware, B1 Hardware in use on a DIR-655, Time Warner Cable setup.  Nothing to do with Revision, cordless phones,I saw this asked once before specifically here, but it was never answered.After several attacks via our cable network and neighbors, we've HAD to turn on MAC filtering.  There are TONS of devices attached normally so two situations popped up:

  #1:  What happens when you max out the authorized MAC address listings?  Does the page get longer when you save/reboot it?  Do I have to do it manually from there forward and where can I get down to the core programming level to edit the code and put the MAC's that are around and on 100% of the time to open up the plug-in list on the GUI?

  #2:  Guest Zone - we NEED a way to have random guests get on our Network with a different password we can randomly change to prevent the outside abuse, etc. but am I understanding what little else has been posted that the MAC filtering also covers the Guest Zone and therefore I have to stick them in there before they could simply log on with the current password?  Is there any way to change/stop that without eliminating MAC filtration as a whole?

View 4 Replies View Related

D-Link DIR-655 :: Enable Mac Address Filtering Only For The Wireless Side?

Sep 3, 2011

It shows this option "Filter wireless clients:   Apply MAC Filtering to devices that connect to the network via Wi-Fi. This is the normal usage of MAC Filtering. Filter wired clients: "However I don't see that option on the actual page. How can i enable Mac address filtering only for the wireless side?

View 7 Replies View Related

AAA/Identity/Nac :: Cisco ISE 1.1.1 Is Given Certificate Error While Trying To Access Any Of Nodes

Nov 9, 2012

Cisco ISE 1.1.1 is given Certificate error while trying to access any of nodes. It is started after adding other nodes in to primary node. Accessing by IP's redirect to other nodes suppose if we accessing primary admin node by IP, it redirect to other nodes (secondary nodes or other nodes).

View 3 Replies View Related

Cisco Routers :: RV082 Protect-link Activated But Not Filtering

Oct 7, 2011

I have a Cisco RV082 that doesn't appear to filter any selected categories. To run through what i've done so far, within the 'Web Protection' screen i've: enabled URL filteringconfigured a number of categories to filter by putting a tick in the repective business hours boxset the business days to 7 days a weekspecified business time as 24hrshit the save button. 

My licence appears as activated and my platform shows as "gateway service".I've gone on to a number of machines and all are able to access websites that fall under my blocked category (facebook for example even though i've blocked the social networking category).

View 1 Replies View Related

Cisco Firewall :: PIX515E - Internal Nodes / Bandwidth Utilization?

Jan 13, 2013

The infrastructure has PIX515E as the Firewall and few Web Servers and Database Servers inside. Is it possible to retreieve information regarding the bandwidth available at the outside interface of PIX (Internet link utilization ) utilized by each of the nodes seperately? I could use SNMP to get the overall data transfer at the Outside interface of PIX but isit possible to get utilization details of individual nodes ? Is Netflow an option ?

View 10 Replies View Related

Linksys Wireless Router :: FTP Port Filtered By E4200 Router?

Jul 21, 2011

I have recently purchased a WD My Book Live and connected to my E4200 Router. I am trying to access this device using FTP from outside my local network. I did all required setting but with no success. I am able to connect to this using FTP from within my Local network. I used nmap to find scan the ports and it says port 21 filtered.

View 9 Replies View Related

Cisco VPN :: 2921 - NAT Ports Filtered Over Point-To-Point VPN

Feb 22, 2011

I have a Cisco 2921 configured with both DMVPN for remote sites and point-to-point isakmp ipsec VPN for smaller residential end-points.
 
The issue is, any ports that are NAT'd from the external appear filtered on the point-to-point vpn endpoints, but work fine over the dmvpn. Everything else seems to work correctly over the vpn. I have the nonat acl set up and the port forwards work fine from the external, but I'm not sure what's happening.
 
I have the configuration on the 2921 for reference.

View 7 Replies View Related

Switching Between Wired And Wifi?

Dec 30, 2011

I am using a laptop in our small office, which has both a wired and a WiFi network (same network via an access point).

Most of the times I am connected to the wired, but never disable the WiFI. When I unplug the cable, in order to move around, I will like to know if it possible to maintain the connection to the network.

I normally have a couple of applications that connect to a database open and when I unplug the cable, they crash and I have to re-open them again over WiFi this time.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved