D-Link DIR-655 :: Network Filtering / 24 MAC Address Limit?
Jan 23, 2013
I have had a great experience with my old DIR-655 (rev A) router. However, I would like to upgrade to a newer and better D-link router for my home that contains many well-connected children. Which routers are like my DIR-655, and have better overall performance than the DIR-655 without necessarily using the benefit of the 5 GHz second band. What better performing routers can record more than 24 MAC addresses in the Network Filtering area? I understand many people don't agree with MAC address filtering, but I like it to keep my kids from giving out my network password to all the neighbor kids and their friends too. So, MAC address filtering works for me. Or, should I just get an updated version of the DIR-655?
View 5 Replies
ADVERTISEMENT
Jan 5, 2011
My DIR-655:
Hardware Version: A4
Product Page: DIR-655
The problem is that Website Filer doesn't work if on STEP 3: SELECT MACHINE of Access Control the machine was selected by MAC address. When the machine was selected by IP everything is fine.The problem is that IP addresses are assigned dynamically, so how to make sure that the policy would be applied to the same machine?
View 8 Replies
View Related
Sep 3, 2011
It shows this option "Filter wireless clients: Apply MAC Filtering to devices that connect to the network via Wi-Fi. This is the normal usage of MAC Filtering. Filter wired clients: "However I don't see that option on the actual page. How can i enable Mac address filtering only for the wireless side?
View 7 Replies
View Related
Mar 8, 2011
How does MAC address filtering secure a network?
View 9 Replies
View Related
Jul 22, 2012
207.NA Firmware, B1 Hardware in use on a DIR-655, Time Warner Cable setup. Nothing to do with Revision, cordless phones,I saw this asked once before specifically here, but it was never answered.After several attacks via our cable network and neighbors, we've HAD to turn on MAC filtering. There are TONS of devices attached normally so two situations popped up:
#1: What happens when you max out the authorized MAC address listings? Does the page get longer when you save/reboot it? Do I have to do it manually from there forward and where can I get down to the core programming level to edit the code and put the MAC's that are around and on 100% of the time to open up the plug-in list on the GUI?
#2: Guest Zone - we NEED a way to have random guests get on our Network with a different password we can randomly change to prevent the outside abuse, etc. but am I understanding what little else has been posted that the MAC filtering also covers the Guest Zone and therefore I have to stick them in there before they could simply log on with the current password? Is there any way to change/stop that without eliminating MAC filtration as a whole?
View 4 Replies
View Related
Dec 19, 2011
I just upgraded to the Belkin N750 DB router from the version just below it and couldn't get the wireless card (Ralink RT2760) in my daughter's dual-boot WinXP/Ubuntu 10.04 to connect to the WPA security setting (WEP only) on the Ubuntu side. There is an updated driver, but it's way above my Linux skill set, so instead I just disabled security completely, and used the MAC Address filtering to add all of our household devices.This solved her connection problem, but I am wondering if there is any danger to this method that I might not have considered
Originally Posted by BelkinMAC Address FilteringThe MAC Address Filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access. When you enable this feature, you must enter the MAC address of each client on your network to allow network access to each. To enable this feature, select "Enable MAC Address Filtering". Next, enter the MAC address of each computer on your network by clicking "Add" and entering the MAC address in the space provided. Click "Apply Changes" to save the settings. To delete a MAC address from the list, simply click "Delete" next to the MAC address you wish to delete. Click "Apply Changes" to save the settings.
View 8 Replies
View Related
Nov 26, 2012
I have two WAP 321 devices set up in our building they are on the same subnet with the same SSID and are using the WDS bridge mode. My question is, if i enable mac-address filtering on one of these devices will this infomation be passed to the other bridged device? or would the allow/deny list need to be populated manually on each device?
View 2 Replies
View Related
Jun 8, 2012
i am using two Cisco AP 4410N series in my network .Wants to use MAC address Filtering but it supports only 20Nos of MAC to add in the AP.
Is there any way like IOS upgrade the AP supports more MAC Address to add.
View 1 Replies
View Related
Dec 29, 2011
I'm attempting to block about 10 to 15 users on the wireless by using MAC address filtering on the Aironet. I referenced the following link: URL,The policy does indeed work, but once I apply the filter all traffic on the wireless for that particular VLAN stops. Why would this happen? I wouldn't think I need to configure anything else for this to work, but maybe I'm wrong.I was looking over the config and I noticed that each time I added a MAC address to the filter, it would create and access-list 701 deny 0000.0000.0000 ffff.ffff.ffff Once I removed this access-list, traffic starting flowing again, but when I add another MAC address the access-list shows up again.
View 15 Replies
View Related
Jul 25, 2008
CAn we filter MAC address in LAN using ASA 5520 , whats the method ?
View 2 Replies
View Related
Nov 4, 2012
Does ASA 8.3 support MAC address filtering, I want to allow a single specific laptop to login to the ASA 8.3 firewall (for management) from anywhere on the internet, I know I can do it through VPN but I want a simple MAC address access list or something......
View 3 Replies
View Related
Apr 9, 2013
I've been asked to configure mac-address filtering on our WLC 4402 and it was basically straight forward. however i noticed that in creating the filter you can only choose 1 SSID or the other option would be to choose all? My question then is what happens if i need a user one 2 specific SSIDs? can i create separate filters for each SSID but using the same mac?
View 1 Replies
View Related
Mar 27, 2012
l have implemented mac filtering auth on my wireless network, l have 2 WLC ( 1 WLC 5508 and 1 WLC 4402, and I wonder if you can migrate the mac address database of a WLC to another and how can l do this.
View 4 Replies
View Related
Dec 25, 2012
I have a Belkin N150 wireless router. I have enabled MAC Address Filtering as an added level of security. However; whenever I access the router, and if I check that page; the check mark for the option to enable the filter is always blank.
I have checked the option, clicked Apply Changes, and logged out of the router. i went back in this morning, to check the security logs. (Looking like someone is trying to jump on my network) I didn't see anything there, but when I checked MAC Address Filtering; there was no check mark indicating that the filter was turned on.
View 2 Replies
View Related
Jan 19, 2011
I just want to allow specified computers wired access to the internet via the E1000 router. Here is the problem I am currently working on:
(1) Setup the E1000 unit to allow only one PC 'C1' (MAC: 91:E6:BA:25:91:58) wired access to the internet.
(2) Add another PC (unknown MAC address) to the LAN side of the E1000 unit and see if it is being blocked by the 'Access Restriction' policy that was setup.
(3) Can’t get the above done – the second PC is able to surf the internet although the policy is enabled.
Notes:(a) Ref: 'Access Restrictions' web page or see Page 26 in the User Guide .(b) The unit has the latest firmware already installed: Firmware Version: 2.1.01 build 5Dec 3, 2010.(c) The internet port of the unit goes to the ADSL modem in my house.(d) Unplugged the unit for 10 seconds as advised by one of your technicians, still no difference.(e) I can deny PCs, but the allowing only specified ones seems not to be doing anything.By the way, can the E3000 or E4200 do the above?
View 9 Replies
View Related
Sep 12, 2011
The browser-based settings utility for my E1200 can't setup MAC address filtering. I go to the "Wireless MAC Filter" page and enable MAC filtering.When I click the “wireless client list” button, a new window opens saying “IE cannot display the webpage”. This always happens when I have a wireless connection active.When there are no active connections, then IE properly displays the MAC address table, but it is empty since there aren't any computers connected to the router.
View 5 Replies
View Related
May 24, 2012
I'm interested by the router Cisco RV180 or RV180W.
So as to increase security, i would like to set a MAC adress access restriction for all peripherals that would be connected to the router (10 computers, 2 servers, 6 Synology NAS) : only allowed MAC adress should access to the internet and network ressources.
Does the Cisco RV180 or RV180W have an IP to Mac biding feature and a Mac adress restriction feature ? If yes, how many peripherals/computers can be set ?
For example, only 30 mac/IP adress can be allowed on my actual router and it is not enough.
View 4 Replies
View Related
Oct 27, 2010
I am planning to enable MAC address filtering (one port on 4510 & another 3560). I want to allow only that MAC address to communicate via that port with the rest of the network and internet.
4510 has PC connected and 3560 had polycom connected. [code]
View 5 Replies
View Related
Feb 15, 2011
When disabling SSID broadcast and enabling MAC address filtering on WAG320N, my other wireless laptop get disconnected. And when you try to connect, it doesn't connect again.
View 3 Replies
View Related
Nov 10, 2012
Been looking around in my routers settings for something that even comes close to limiting bandwidth on a specific port, or mac address, but the only thing I can find is priority settings like "Low, Normal, High, and Highest" I did however see this:
I am not 100% sure if I can specifically set bandwidth limit per port or mac address, cause I don't see an option to do that, so I presume it just limits the whole network as one...
View 13 Replies
View Related
Aug 29, 2012
I need to limit access to two ip address via acl but when i add them to the list i lose access to internet.
View 1 Replies
View Related
Jun 3, 2013
Worried about denial-of-service attacks. They have 11 vm's that share a connection and want to set it up so that there is a maximum amount of traffic allowed to hit each vm, so if there is a DDoS attack it will only affect that one VM instead of all the VM's on the same connection.
What is the best way to go about this from the ASA? This is behind a 5515 with asa code version 8.6. Is there a way to rate-limit by ip address?
View 1 Replies
View Related
Oct 15, 2010
I tried to find an answer to my issue however came up short. Did find,url... but that for a 600 not 601. I have "Mac filtering on and to only ALLOW the addresses below" however, it allows any computer, even if i do not have them listed.
View 3 Replies
View Related
Jul 12, 2012
I have dlink dir-600 router and I want to block access to website [ URL] for only one PC connect to router. i can either block web access to both PCS connected or block entire web access to one PC.
View 1 Replies
View Related
Feb 7, 2012
I have come across articles mentioning that URL Filtering can be implemented by using ASA 5505 with URL Filtering Servers. But Websense and other Web Filtering Servers are paid ones ? Are there any free solutions available ? What exactly is N2H2 ? The reason is I don 't want to increase the CPU utilization of ASA by implementing URL filtering within the device. If I have around 30 nodes which connects to the internet via a 2Mbps line through ASA 5505 and if I want to block around say 10 or 15 URLs , will it increase CU utilization beyond permissible limits ? Currently the CPU Utilization is around 10 - 15 . Here's the infrastructure setup .
------------------------------------------------------------
Nodes -->Switches-->ASA 5505-->Internet
-------------------------------------------------------------
View 4 Replies
View Related
May 25, 2013
I want to limit data consumed by one of my devices; how can I do that. I have set up wireless network using Belkin AC 1200 DB.
View 1 Replies
View Related
Sep 15, 2012
I have a 2921, and I have 4 network segments. In segment 172.16.0.0./27 I wand to "pair" somehow connections. I mean IP 172.16.0.x has to have MAC aaaa.bbbb.cccc and so on, and not accept connections otherwise.How can I do that?
View 7 Replies
View Related
Aug 21, 2011
We will shortly be installing a Cisco 3825 router, to be connected to the BTNet service, over fibre.We will be binding many public IP addresses to the router.
Is there a way of defining a specific bandwidth limit per IP address, or range?
View 5 Replies
View Related
Feb 12, 2011
My network is set up in the following way..
DSL-320B | Linksys E3000 192.168.0.0/24 Subnet A Static Route 192.168.1.0 255.255.255.0 192.168.0.100 | Wan Port 192.168.0.100 DIR-655 | DIR-655 192.168.1.0/24 Subnet B
I am unable to browse by IP any machines on Subnet B from Subnet A and suspect this is due to the NAT and the Endpoint filtering within the DIR-655.
View 2 Replies
View Related
Jan 17, 2011
It seems (and should be) pretty straight forward; under ADVANCED go to WEBSITE FILTERING and enter in the URI, or partial URI, that you want blocked and make sure the drop-down menu is "DENY computer access to ONLY these websites". The only problem is, I can still get to all of them. I saw in another forum that you had to check "Enable Access Control" and go through a 6-step process where you specify machines - I truly hope that isn't the solution, because it's needlessly complicated for most users who only want to block ALL devices on their network from accessing certain sites. My Hardware Version is B1 and my Firmware version is 2.00NA.
View 2 Replies
View Related
Jan 23, 2013
Where on my router interface I could go to enable both the SPI Firewall, and the Wireless MAC Filtering? I have the D-link DIR-815.
View 1 Replies
View Related
May 20, 2011
DIR600 doesn't allow me to enable wireless MAC filtering when I setup DIR600 as access point. (I connected DIR600 (access point) to my another room's router.)
View 1 Replies
View Related
Jul 10, 2011
I would like to know how to configure my DIR-600s firewall UDP Endpoint Filtering. I ve read some guides and I ve got to configure this to Endpoint Independent in order to play League of Legends. The problem is that I can see the option Firewall & DMZ but then I don't see the UDP or TCP Endpoint Filtering options.
View 1 Replies
View Related
