Linksys HR200 Connect To O2 Wireless Box?
Aug 4, 2011
I have belkin homeplugs connecting my O2 wireless box in one room to my ps3 in another room because the wireless signal is pretty bad through all the walls, I recently dug out an old linksys router and tried connecting that to the homeplug in between the homeplug and the ps3 to improve the wireless reception (ie. connect to the linksys router on my phone when i'm playing on the ps3) but when I connected it all up I was expecting the DCHP to sort out all the IP addressing and internet routing but this was not the case, i'm abl to connect to the linksys router no problem but the router doesn't seem to be interfacing with the O2 wireless box at all for an internet connection. Aany way I can sort this out manually?
View 5 Replies
ADVERTISEMENT
Jul 29, 2012
Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies
View Related
Feb 24, 2013
I have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
I've tried changing the Ethernet cables
View 1 Replies
View Related
Feb 25, 2011
I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
View 7 Replies
View Related
Aug 12, 2011
WRT610v2 running latest firmware.
xbox 360 sees both the 2.4 network (ssid = network1) and the 5.0 network (ssid network2) when it does its scan.
Initially, xbox showed network strength for 2.4 network at 3 out of 4 bars and 5.0 network at 1 out of 4 bars. Connects to 2.4 network just fine, Won't pull an ip address and reports "Not connected" when I select the 5.0 network.
I tweaked the wireless settings per some suggestions I found in this forum and now it shows the 5.0 network at 4 out of 4 bars signal strength. Also turned security on and off and xbox 360 reported the changes in security on the 5.0 network. So the xbox 360 is definitely seening the 5.0 network. and can tell if it is running WPA2 or not. If it can see the 5.0 network and recognizes what security and network type (infrastructure) is set, would would stop it from connecting to the WRT610n router and getting an IP address? No mac filters or firewalls are set and, again, connects just fine and gets an ip address if I select the 2.4 (network1 ssid) instead.
View 2 Replies
View Related
Nov 7, 2012
I have a WUSB11 Wireless B and wonder if it accepts WPA2 security, I originally had my router set to WPA, and the wireless B worked fine, I have since changed to WPA2 and notice the Wireless B device won't connect.
View 8 Replies
View Related
Feb 6, 2011
I am trying to set up a wireless repeater at home and it requires that I get configuration settings from my wireless router.However I can't access the router configuration screen.The router is a Linksys WRT54G.I am trying to access it using the IP address 192.168.1.1.I keep getting an error that says the page cannot be accessed.
-I have tried using both my a wireless and wired connection to the router. I confirmed the internet connection before attempting this.
-I have tried using internet explorer and Firefox
-Some posts on this site suggested trying 192.168.2.1, and 172.16.106.1, neither worked (they timed out)
-I typed ipconfig and into the cmd prompt and found that 192.168.1.1 IS my default gateway
-I tried adding the "s" (https://192.168.1.1) and got a username and password prompt.I do not believe I ever set up a username and password for my router.
View 4 Replies
View Related
Jan 22, 2011
I have a linksys WVC200 Internet camera and a Linksys E2000 Router.I cannot get the camera to connect to the E2000 via wireless, using a network cable no problems.Yet It works perfectly wireless and wired if I cannect the WVC200 Camera to a Belkin N1 Router. Linksys WVC200 - Linksys E2000does NOT WORK! Yet Linksys WVC200 Camera to Belkin N1 Router wsorks perfectly?
View 1 Replies
View Related
Nov 26, 2011
A couple years ago I changed my modem/router to a Linksys WAG320N from a D-Link crappy half-broken one.
I used to connect my PS3 via wireless to said modem without any issues whatsoever, but I'm unable to do the same with the Cisco one.
I've tested both the PS3 and WAG320N wireless connections and they work just fine using different modems/routers and PCs. I also used an ethernet cable to connect PS3 and WAG320N and the connection is fine.
When I try to setup the network the following messages pops-up after inputting the router's password: "A connection to the access point could not be established. Check the security settings for the wireless LAN."
What I tried so far:
- Switch WAG320N wireless mode from B/G/N-mixed to Only G (used by PS3)
- Change password protection from WPA2-mixed(AES) to WEP
- Remove password protection
- Change Channel Bandwidth from 40MHz to 20MHz
- Change Wireless Radio Band from 2.4GHz to 5GHz
View 1 Replies
View Related
May 20, 2012
Have two laptops in home, one can connect thru Linksys router while the other cannot, why??
View 3 Replies
View Related
Dec 26, 2011
I have wireless but need a directive connection kit to watch movies.can I use a linsksy router? If so what else do I need since the word "kit"
View 3 Replies
View Related
Apr 21, 2011
I switched to AT&T and have a (Linksys wireless G (WRT54GS) and it worked fine when I was with Comcast. I only have a laptop and need it to be wireless.
View 3 Replies
View Related
Feb 12, 2013
I have just installed the E1200 router to my cable internet and it works great, but my printer is not wireless and is not even being recognized as an device on my computer. How do I now connect my printer?
View 1 Replies
View Related
Mar 18, 2012
I have a E4200v2 and im getting wireless connection issues. I have updated to the lastest firmware and have checked all my wireless settings. I dont use usb storeage. I have 1 laptop using 5G, my iphone using 2G and my wife mac using also 2G.. the problem is that, once we stop using the 2G connection (leave it overnight), it just dies the next day.. it wont connect, i double check the password and it wont connect. But the 5G connection is fine.. Do i have a break E4200v2? or anyway of fixing this?
View 2 Replies
View Related
Aug 16, 2011
I am trying to follow the steps to type in the 192.168.1.1 but all the username and passwords arent working for me.. How can I get my wireless to connect to my smart phone.
View 1 Replies
View Related
Feb 11, 2012
I am using LINKSYS WRT54GS2 Router. Mostly I use it for connection via Wireless. I am able to connIect to it via WIRELESS more than one Laptop running Win XP and and tablets.I wanted to connect one more laptop with WINDOWS 7 OS to this network. I was able to connect via wireless this laptop ( win 7) , but the other one with xp gets disconnected.
View 1 Replies
View Related
Mar 11, 2011
I have a linksys E1000 and cannot connect to my wireless network. what is supposed to plug in where in the back of the router?
View 2 Replies
View Related
Nov 4, 2011
finding my wpa key for my linksys wireless router to connect my PS3 to internet.
View 1 Replies
View Related
Mar 24, 2011
Just got vonage phone service and a new laptop... what type of wireless router can I use this my existing service cable modem>vonage.
View 1 Replies
View Related
Mar 26, 2012
I own a E1000 router that I use with several wireless machines. Unfortunately, I cannot connect to the configuration of the router by typing url...in a browser, be it wireless or weirdly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router". I tried to switch my router off and on, but that doesn't work. Totally resetting the router solves the problem, but not definitely.Is there a solution that does not require resetting my router?
View 2 Replies
View Related
Dec 25, 2009
I purchased a WRT610N router early this month, the wireless network was working completely fine when I first set it up. Today I tried to connect my laptop to my wireless network. The laptop isn't able to connect at all. I also got a Sony PSP which has WLAN on and that saying it cannot detect any access point which would be my router.
View 3 Replies
View Related
Oct 18, 2011
I just ordered the E3200. It's suppose to ship today. I know it comes with 1 USB port for hard drives. Is it possible to connect a USB hub to the router so that I can connect more than 1 hard drive?
View 1 Replies
View Related
Aug 12, 2012
Setting up new E1200 wireless router. Used the CD to setup network. It set up two networks: 1 secured and one unsecured guest network. Ican connect wirelessly to guest network no problem but it will not connect to the secured network using the correct security key (password).
View 9 Replies
View Related
Mar 14, 2011
How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.
View 3 Replies
View Related
Aug 3, 2012
I'm having an issue getting my tv to start connecting again to the wireless router.Have tried pin setup (timed out & didn't connect...attempted at least 10 times in this fashion)Have tried entering the password (router seems to refuse the connection to the tv)About a month ago, I was in the Network Magic Map & it looked like one of the laptops had been cloned, so I removed it from the network.
View 3 Replies
View Related
May 13, 2012
I recently got an MBP, while I tried connecting it to the wi-fi connection, I keep getting the "invalid password" prompter. I tried connecting my other mac computer and Iphone to the connection and it works. I also tried connecting via ethernet as well, it worked as well. I have been trying to call the CISCO number to no avail, and it is really frustrating to be paying premium for the connection, I don't feel supported at all.
View 2 Replies
View Related
Feb 15, 2013
setup an external hard drive with music on on the usb port on my EA3500 and actvated ftp but I cant access it from the net.
View 1 Replies
View Related
May 2, 2012
I have both a Sony XBR52HX909 and a Sony BDP-S580 connected to my router (WRT54GL)via ethernet. When I try to connect to the internet, both show the wired connection as good but neither can connect to the internet. The BDP-S580 also has wireless connectivity, but it can’t connect to the internet wirelessly. I have two desktop computers connected via ethernet and two laptops connected wirelessly to the same router and all have internet connectivity. I have tried the “auto” settings on the TV and Blu-Ray player and also tried entering the network information in manually. I still can’t connect to the internet.
View 5 Replies
View Related
Nov 4, 2012
I'm not really computer savy and I have an old wireless G Broadband router model # WRT54G2 V1 .
View 1 Replies
View Related
Oct 22, 2012
I have a few devices at my home that connect wirelessly to the internet via wrt54g. I want to connect to the internet via VPN. I would like to find out if it is possible to connect WRT54G router to the VPN via PPTP or L2TP? The VPN company provided me with PPTP and L2TP credentials. I can access vpn via OpenVPN on computers but I would like my TV connect to the internet also via VPN.
View 5 Replies
View Related
Jul 9, 2011
I'm unable to even get an internet connection with my router, so I cannot access the router configuration settings page. I already made sure that the ethernet cables weren't the problem. I hook the cables up as instructed, but can't get the internet connection. I'm running Winows Vista Home Premium and according to my ISP (cable service), the ISP settings should already be set up to connect automatically with the router. It's a used router (not new) and I've already reset it several times..
View 4 Replies
View Related
Oct 5, 2011
Went away on vacation for a couple of weeks and when I got back my Linksys WRT54G2 has lost it's configuration. It's showing a WiFi signal, but is no longer password protected.
I've tried connecting with a desktop on the same network, to 192.168.1.11, but that address is not connecting. I tried to reach it with my iPad wirelessly, and it's giving me the login screen, but not allowing me to login. I tried to use the reset button on the back to reset it to the factory default, but then I should be able to login with no username and the password of "admin", correct? But that's not getting me in either.
I'd like to get this network password protected again and not offer a signal to all of my neighbors.
View 2 Replies
View Related
Sep 9, 2012
I picked up a AE3000 for an older laptop, but it will not connect to any network. It is on an older (01') dell laptop running XP SP3. I have tried using the disk and downloading the latest drivers on-line but no luck. It picks up all the networks around me and mine, but it says trying to connect and just can't. I tried it on another laptop and everything works fine. Is there an issue with this adapter and the original USB ports or XP in general? I have checked and rechecked the passcodes, I have deleted all of the profiles and started from the beginning again. I removed my anti-virus program as well as the last effort. Nothing I do seems to make a difference though.This is just used to access the internet on a laptop that is dedicated to a telescope.
View 4 Replies
View Related
