Linksys Wired Router :: BEFSR81 V3 Won't Connect To It

Sep 15, 2011

I can connect to the router and connect to the Internet by by-passing the router, but can't connect through the router.  firmware 2.51.4 is up to date, cables are all good.  I can't find any diagnostic tools in the management screens - are there?

View 2 Replies


ADVERTISEMENT

Linksys Wired Router :: BEFSR81 Unable To Connect To Internet

Mar 2, 2011

My BEFSR81 router has never been a problem for over 10 years.All of a sudden I can not connect to the internet..I only use the router for connecting 2 PCs to the internet modem. I have not changed any configuration. tried my IPS COX recommendation to disconnect the power for about 1 minute then try again with no luck. CoX said they tried pinging my router but could not get a reading. While waiting for them to come up with a solution, I hooked one of my PCs directly to the modem. It worked. So I tried it with the other PC. But it didn't work right away. It kept trying to dial up for a connection. I finally got the WIZARD to get it configured correctly. I assume it must be a router problem because either one of my PCs can get an internet connection when hooked to the modem.  I did not pusue any further with COX, THEIR AUTOMATED TROUBLE SHOOTER WAS GETTING ON MY NERVES.Should I take the time to resolve the issue with the router or buy a new or refurbished router? If the task isn't too complicatged, I am willing to try and fix it.

View 1 Replies View Related

Linksys Wired Router :: BEFSR81 Keeps Losing Wired Connection To WAP54G?

Apr 11, 2012

I have a WAP54G in my basement shop, wired to our main router upstairs, which is a Linksys BEFSR81.  I'm not sure if this is an issue with the WAP or the router.
 
I only use the laptop computer in the shop every couple of days, but I leave the laptop plugged in and on most of the time.  I used to have the power settings such that it didn't power down completely even after a long time.  With that setup, if i didn't use the computer for several days, it would find that the connection to the router had died.  The wireless link would report that it had a solid connection, but I couldn't connect to anything.  Power cycling the WAP always fixed this.
 
Recently, I decided to save some wear & tear on the laptop drive, and adjusted the power settings to go to standby after a couple of hours.   Now, it seems I can't even go one day without losing my connection.
 
I am running the latest frimware in the WAP, and the router is version 3.1.  I can't check the firmware version on the router at the moment, because the web interface is giving me a blank screen.  I know from past experience that I will have to power cycle it to get it to talk to me again. 
 
In any event, it seems like the router connection to the WAP is timing out.  I set the router "client lease time" up to 10000 a while back when I first had this problem, but that is clearly not doing the trick.

View 3 Replies View Related

Linksys Wired Router :: BEFSR81 Was Not Functioning Well?

Jun 18, 2011

My router was not functioning well so I decided it might be a good idea to reinstall the driver package via the admin upgrade page. Since then it doesn't work at all. The power light flashes constantly now.

View 9 Replies View Related

Linksys Wired Router :: Using BEFSR81 And Two 360 XBoxes?

Apr 8, 2012

Problem (1)I was told that having two (2) gaming systems on the BEFSR81 router will cause both xbox machines to loose connections.   My kids demonstrated this lockup with the Xbox.  I think its because the Xbox connection is seeing 1 IP address for both game machines.  Question is there a way to fix this without getting two DSL modems with two different IP addresses ?   
 
Problem (1)My router BEFSR81 locks up at least once every 3 days and then randomly also.  We reset it is by unplugging the power to the router and it reboots and returns to normal.  I also notice that the router is quite hot on the top, so I put a small quiet fan on top and the router now works longer before it locks up.  (All green lights flash together or all on solid). So I thought gaming machines might be the reason for the lockup, we disconnected the xbox(s) and the router still locks up on occasion.  I have read the other forum and found that Amazon could be a problem since I have been logging, I turned logging off but I still have the same lockup....Is my router dying a slow death...

View 1 Replies View Related

Linksys Wired Router :: BEFSR81 Not Working

Dec 12, 2006

I just buy the BEFSR81,still not working.

View 3 Replies View Related

Linksys Wired Router :: Can't Save Changes Made With BEFSR81

Feb 27, 2011

I try to make changes or save changes from the web page on my BEFSR81 nothing changes and everything revert back to the original setting made a long time ago. cancel changes works fine as the page reloads, but save changes won't make it save or reload the page with saved settings. i updated java and used 3 different browser and always get that error.

View 1 Replies View Related

Linksys Wired Router :: Upgrading Firmware BEFSR81 V3 On A Mac?

Mar 14, 2009

I'm trying to upgrade the firmware on my BEFSR81 v3 cable router (firmware version 2.45.xxx) on a Mac.  I accessed the interface via Safari browser, followed the instructions, got a message saying not to interrupt the process, but it never completed.  So I tried it again (downloaded another copy of the firmware update), and same thing.  No choice but to interrupt it.  My internet connection seems to be working fine, but now I can't access the router via the browser.  I don't think the firmware actually updated.
 
Should I power down the router and then reset it?

View 3 Replies View Related

Linksys Wired Router :: Befsr81 Not Updating Hostname Ip?

Nov 4, 2011

i successfully configured my befsr81 router hardware version 3.1 with a dyndns hostname account. how often is it supposed to update? it doesnt seem to update till i login to the router through my browser. where is successfully updates. is there a way to choose how often it updates?

View 2 Replies View Related

Linksys Wired Router :: BEFSR81 With WRT54GS In Same Network?

Sep 13, 2011

I currently have a LinkSys BEFSR81 connected to my cable modem as I need at least 6 wired ports for my house network.  I also have a WRT54GS that is currently unused, but I would like to add it to the network so I can have some wireless connectivity as well. 
 
Assuming that it's possible, what's the best way to combine these two units into the same network?  Can the WRT54GS simply be connected downstream from the BEFSR81 via one of the open ports?  I'm assuming that I'll have to change the IP address on the wireless unit to make it individually accessible for configuration, status checking, etc. 

View 2 Replies View Related

Linksys Wired Router :: BEFSR81 V3.1 Firmware Downgrade?

Feb 20, 2011

I recently updated the firmware on my BEFSR81 v3.1 but would now like to revert to the previous version.
 
Where I can find the earlier version? I've got  2.51.4, build 006 Aug 21 2009 and need the one before.
 
It's not a critical problem, but more of an annoyance. I power everything here off one big switch which goes off overnight. Before the update I'd just switch it all on in the morning and everything would, after a minute or so, work fine. Now, however, I have to power up the router a minute after the modem or it just sits there doing nothing. That's OK when I'm here, but if it's just the wife she can't reach the back to do it.

View 1 Replies View Related

Linksys Wired Router :: Cannot Seem To Configure BEFSR81 As Standalone Switch

Nov 6, 2011

I want to use my old BEFSR81 as a switch only and for whatever reason it doesn't seem to allow me to do that.I've disabled DCHP but I don't see a way to disable the router.  Is there some trick into using this router as a switch?

View 1 Replies View Related

Linksys Wired Router :: BEFSR81 V3.1 Blank Admin Pages?

Jan 28, 2010

BEFSR81 v3.1 Current firmware 2.51.4 build 600 (09-4-2009)The Web Admin pages become dysfunctional after the router has been up 3-4 days displaying only a blank white page. Viewing the page source shows that the HTML is incomplete.I am not sure of the exact firmware version where this problem originates, I noticed it after flashing to 2.51.4 build 400 but cannot remember which version was running before the update. Just flashed to 2.51.4 build 600 last week hoping the new version had corrected the problem. Still broken.The router remains completely functional but the Web interface does not work correctly after 3-4 days.I have tried re-flashing the firmware and have gone as far as resetting the router both before and after the flash, even tried 30/30/30 resets but the problem with the Web interface remains.Re-booting the router every 3 days is not the best “solution” as my network is running DHCP. I would rather not fall back to older firmware as ver 2.51.4 build 400 corrected the DHCP errors on my Windows machines and decreased the initial connection time when machines boot up. I have read in this and other forums where others are having the same problem with this router/firmware but have been unable to find a working solution which leads me to believe the actual problem resides in the later firmware builds.

View 9 Replies View Related

Linksys Wired Router :: BEFSR81 With 8-PT Switch Throttling Speed

Mar 7, 2011

When I am connected directly to my Surfboard modem I get 3000kbps upload with wired connection.
 
With the BEFSR81Router conected I get 1000kbps.

View 9 Replies View Related

Linksys Wired Router :: BEFSR81 Access To Proxy Server

Jan 22, 2011

My router is a Linksys BEFSR81.Recently I installed a proxy server and now I would like to setup my router so that only the proxyserver (HTTP traffic) can connect to the Internet.

View 3 Replies View Related

Linksys Wired Router :: BEFSR81 V2 - Power Adapter Required

Jun 2, 2012

From what I understand, it requires a 5V 2.5A adapter ... alas, cannot find one. 

View 2 Replies View Related

Linksys Wired Router :: BEFSR81 Will Not Save Port Forward Info?

May 17, 2011

BEFSR81 will not save port forward info.  I am trying to setup port forwarding for xbox (53, 80, 88, 1863, 3074), I click on enable to the far right and then click save at the bottom.  It says settings are succeful, will return in 5 seconds.  When it returns everything is zeroed out.

View 3 Replies View Related

Linksys Wired Router :: BEFSR81 Crashes When Accessing Specific Website

May 9, 2010

I am experiencing loss of internet access when browsing to amazon.com.  In addition to losing internet access, I am unable to connect to my BEFSR81 router when this happens.  To resolve I have to walk over to my router and reset it by cycling the power.
 
This issue has been reported by other users of the BEFSR81 too: URL
 
Details: My BEFSR81 is version 3.0 and is running firmware version 2.51.4

View 9 Replies View Related

Linksys Wired Router :: BEFSR81 V2 Ports Become Inactive - Upgraded To Latest Firmware?

Jan 5, 2012

I have the Linksys BEFSR V2 router and at least once a day some or one of the ports become inactive and have to unplug the router and plug it back in to reset. I have ungraded to the latest firmware but this is still happening on a daily basis.

View 3 Replies View Related

Linksys Wired Router :: BEFSR81 V3.0 I Selecting Enabled UPnP / Cannot Access Router

Apr 19, 2009

BEFSR81 v3.0.I selecting Enabled UPnP and now I cannot access the router.  When I enter the default admin for the password in the Authentication Required screen.  I get the following screen: 401 Authorization RequiredThis server could not verify that you are authorized to access. Either you supplied the wrong credentials(e.g., bad password), or your browser doesn't understand how to supply the credentials required.I didn't enter anything new into the username or password fields.

View 5 Replies View Related

Linksys Wired Router :: BEFSR81 V2 Ports Become Inactive / Upgrade File Pattern Error?

Jan 2, 2012

I have the BEFSR81 V2 and every day at least one of the ports become inactive and the router has to be unplugged and plugged back in to reset the ports. I was going to upgrade the firmware from version 2.44.2 to the one on the site 2.45.10 but when it is downloading I get a message at the end upgrade file pattern error. There is a problem with the router that the ports go out or will the firmware update hopefully correct that issue and how to I get the firmware to update

View 2 Replies View Related

Linksys Wired Router :: BEFSR81 / Add Device Names To DHCP Device Table?

Nov 30, 2011

My BEFSR81 is my primary router and has DHCP turned on.  The router's DHCP range is set to accommodate 12 devices.  I have three computers wired to it and their Host names (as specified in the set-up of each computer) show up in the router's DHCP device table.  I also have two printers (one old Brother HL5250DN laser printer and one new HP Photosmart Premier C410a inkjet printer) connected and there are blanks where the Host name should go.  I would like to be able to tell which printer is which when I am looking at the DHCP device table.  How can I get a names associated with each printer's IP address in the router's DHCP device table?  (The real problem is that the router seems to have both printers at the same IP address (192.168.1.100) and if I can get one of them to change I'd like to know which one it was!)

View 1 Replies View Related

Connect HP LaserJet 4050 To BEFSR81 Router But PC's Are Not Printing To It?

May 22, 2011

I am trying to connect my HP LaserJet 4050 to my BEFSR81 router (via ethernet), but my PC's are not printing to it? When I click on Devices&Printers on my Win7 PC, I see it and it has a green check mark, but I am not sure if the pc actually sees this printer or if it is showing this because I installed the driver.

Other option would be buy a print server (EFSP42), but I would rather just connect it to the BEFSR81.

View 19 Replies View Related

Linksys Wireless Router :: Befsr81 V.3 - Missing Security Feature To Setup Secure Wifi Password

Mar 11, 2013

i have a Linksys modem BEFSR81 v.3 and am trying to reset my wifi password for secure connection.  When i log into the the admin page, to my surprise, I could not find the security feature to create WPA or WEP password.  i'm stumped.  This has never occurred to me before on this modem.

View 6 Replies View Related

Linksys Wired Router :: Can't Connect To LAN Using RVS4000

Dec 20, 2008

I just installed an RVS4000 router for a SOHO. I have no problem getting out to the internet so access from LAN -> WAN is working fine. The problem is with VPN access from the WAN.I created a VPN account and set up QuickVPN on a PC making sure I imported the certificate. I can connect to the router with no problem and I can even connect to the routers web admin page.But that's where it ends. I cannot connect in any way, shape, or form to PCs on the LAN through the VPN. I can't even ping them.Am I missing something in the setup of the router?
 
This is the only reason I bought this router as the old one was working fine. How to fix getting through the router to connect to the computers on the LAN.

View 9 Replies View Related

Linksys Wired Router :: WRT610N - Can't Connect To 192.169.1.1 Or 192.168.0.1

Dec 30, 2010

I recently tried to connect to my router via 192.168.1.1 (I've accessed it before) howvever this time it says the page is
 
unavailable.  I've tried it several times for a couple days now and still it wont work. I have also tried 192.168.0.1

View 8 Replies View Related

Linksys Wired Router :: Connect Both LANs With Two RV042?

May 10, 2011

LAN L1, with IP addresses 192.168.10.x, for Company C1
LAN L2, with IP addresses 192.168.11.x, for Company C2
 
I have networks separated: different racks (but very closer fisically: a wire can be thrown), different gateways (to DSL), but both LAN's must connect with each other. I have acquired two RV042, one for each company to create VPN's (permitting telejob).

View 1 Replies View Related

Linksys Wireless Router :: E4200 Cannot Connect With Wired LAN

Sep 27, 2011

I have this E4200 for about 3 months and allways has been used as an wireless router. Today i wanted to connect 2 wired computers to it via lan and whatever i do dosnt connect. Dosnt even let me acces the 192.168.1.1 page to router settings.I am on firmware 1.0.02, i also did a full reset and then did set up  with cisco connect, did try that thing with the cisco usb connect and still no joy with the LAN conection.
 
One comp  uses win 7 the other is on win xp. I can connect both comps succesfully to other router via the gigabit ports but not to this one.

View 3 Replies View Related

Linksys Wired Router :: VPN Can't Connect To Network RVS4000

Mar 14, 2011

I have successfully configured my Cisco RVS4000 for VPN Access, and Installed QuckVPN on my client machine.  I can connect using QuickVPN no problem, but I cant access anything on my network.  When I try pinging any of my servers I am unable to do so.  I can ping my gateway thats about it.

View 1 Replies View Related

Linksys Wireless Router :: E3200 Can't Connect Wired?

Aug 31, 2012

I have an E3200 router. I had been experiencing connection problems with my desktop that was wired to the router, and in an attempt to resolve the issue reset the router to its factory defaults. Now, as before the reset, I can connect to my router just fine via Wi-Fi (I have several devices connected this way) but none of the computers that I attempt to connect via ethernet are able to establish a connection. I have tested multiple cables with multiple computers using multiple ports on the router, to no avail. When I view the Status --> Ports page on the router, I can see the ports in use that I am connected to, but that is the only sign of connection that I get.

View 1 Replies View Related

Linksys Wired Router :: BEFSR41 V4.3 Won't Connect To Internet

Nov 25, 2007

My cable modem works fine when not running through the router. However, when running through the router, the internet won't work.I tried unplugging the power and plugging it back in, as well as holding down the reset button for 30 seconds, but nothing worked.

View 8 Replies View Related

Linksys Wired Router :: Cannot Connect To Internet Through WRT54GS

Mar 2, 2013

I have a WRT54GS router, and starting today I am completely unable to access the internet through it. If I connect my computer directly to my modem, I can access the internet, but if I try to connect through the modem, all I get is "DNS server not responding".I've tried changing the DNS server address on the router configuration page, but it doesn't work.
 
Here's what my ipconfig /all shows:
 
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : HomePCPrimary Dns Suffix . . . . . . . :Node Type . . . . . . . . . . . . : HybridIP Routing Enabled. . . . . . . . : NoWINS Proxy Enabled. . . . . . . . : No

[code]....

View 3 Replies View Related

Linksys Wired Router :: Befsr41 - 2nd PC Cannot Connect To Internet

May 12, 2011

I have 2 PCs and am using a Linksys befsr41 router.The first PC connects fine. The 2nd PC does not find a connection. BTW, when I connect my laptop to the 2nd port, it sees the connection immediately - the lights flash on the ethernet connection. No lights on the 2nd desktop PC.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved