The E3200 router supports DDNS updates to DynDNS.org but I'm unable to determine if the password is sent securely or not. According to their website, [URL] The API works over HTTPS and HTTP. How do I know which protocol is applied when sending the password?
View 2 Replies
dynDNS (dyn.com) doesn't offer any free version of their service anymore. Without using 3rd party firmwares: Is it possible to use other free DDNS services like no-ip for DDNS and if not, will there be an update soon that includes free DDNS hosts?
View 4 Replies View RelatedI have an E3200 router and need to know how to reset the password... cant connect my tablet because it asks for cisco connect password and I have NO CLUE what it is... if i do the reset on bottom of my router will it let me reset my password???
View 3 Replies View RelatedPassword would not work, had to reset to factor. How do I make a new password and secure it again? WRT5462
View 4 Replies View RelatedRecently, I bought the E3200, and tried to configure its ports for gaming. Yet, whenever I would hit save settings, it would say my settings were saved, then return me to the settings page. But the settings would be blank. I tried downloading firmware from the website (which should say September 28), yet it still says I am running the firmware from September 1st, even after I applied the upgrade and followed through with the 50 second reboot process.
So, I guess my final question for any tech savvy person out there is "What is wrong with my router/firmware?" I am running the browser config in the most recent Firefox on the same MacBook I used to install the router, and haven't changed any settings other than the SSID and password.
i have a Linksys modem BEFSR81 v.3 and am trying to reset my wifi password for secure connection. When i log into the the admin page, to my surprise, I could not find the security feature to create WPA or WEP password. i'm stumped. This has never occurred to me before on this modem.
View 6 Replies View RelatedWhen setting up my e1000 router for a secure domain it automatically opened a non secure one that my neighbors are using. How can I cancel it?
View 2 Replies View RelatedSince firmware 1.0.3 it seems my DDNS is not updaing with DynDNS since the last update.
View 2 Replies View RelatedDoes the EA6500 firmware support NO-IP DDNS?
View 1 Replies View RelatedI have an E900 connected to my LAN acting as a wireless access point (router functions disabled). Can I use the DDNS feature of the router in this configuration? I attempt and get ‘No Internet Connection’.
View 8 Replies View RelatedI've just bought and installed a WAGN320N router and I have identified two problems:
1 - The router actively prevents me from using non-alphanumeric characters in both the admin password and the shared folders passwords, however such passwords are more secure and in most other places recommended. How do I switch off this restriction so that I can set a secure password?
2 - The Filename Encoding on the Storage>Administration page can't be changed. I have changed the drop down box to "Western Europe/Latin1" several times and then clicked "save settings", but setting always flips straight back to "USA" after saving.
Just purchased an E2000 (Firmware version 1.0.03) to use with DDNS. Much to my surprise there seems to be a problem with saving the password at the configuration screen. [code] With the above settings entered and the Update button pressed favorable results are obtained; the router reports that DynDNS.org updates okay. However once the "Save Settings" button is pressed an update fails with the error "Authorization failure bad ID or password".Is anyone else experiencing this issue? Is the password field limited to certain characters?
View 9 Replies View RelatedIs there any free DDNS providers that can be used with a EA6500 ?
View 3 Replies View RelatedI can't be the only one who misplaced their Router's Password - How do I manage to 'connect' my new devices (Kindle Fire and new smart phone) to my router installed less than 2 years ago.
View 1 Replies View RelatedWhere can I retrieve forgotten password/security key for my secure wireless network?
View 2 Replies View RelatedTrying to convert a spare router (Linksys E3200) into a wireless access point toextend my wireless coverage. I thought knew how to do this but having a problem.Steps I followed are:1. Disable the E3200 DHCP server2. Change E3200ip address from 192.168.1.1 to something else3. Disable the firewall4.Make wireless settings5. Connect it lan port to lan port with primaryrouter.The problem I am having is that after I finish step 2 the routerreboots with the browser trying to access it at the new ip address. But thebrowser will not connect.I am doing this on a laptop that is disconnected from my network while I am working on the E3200. It is connected byan ethernet cable to an E3200 lan port. I also tried it wireless with the same result. Browser will not connect at any ip address except 192.168.1.1 and then only after I factory reset the beast to regain the 192.168.1.1 ip address
View 3 Replies View Relatedafter messing with it for a 2 days since I got it I cant seem to get more than 130.0 my last router had 300 same setup same distance
View 9 Replies View RelatedI just ordered the E3200. It's suppose to ship today. I know it comes with 1 USB port for hard drives. Is it possible to connect a USB hub to the router so that I can connect more than 1 hard drive?
View 1 Replies View RelatedI have been using an E3200 and it has been working great. I know have a need for wireless coverage in a distant part of my house and the current router won't get there. I also need wired in that spot of the house as well. I thought to buy a e1200 to use it as a WAP for that part of the house and also to have a few Ethernet ports come off it. Can I connect to my original E3200 wirelessly from the e1200 and then use the e1200 as a WAP and for Ethernet?
View 7 Replies View RelatedI just upgraded my router from 1.0.03 to 1.0.04, I have a few questions:After installing the firmware, I pressed the reset button at the back for almost 1mn, the power lighted as expected, I then unplug the power cord for 30 sec.The strange thing is that this did not lead to a reset of the configuration, all my settings are still here...!But the actual problem is that my internet speed is divided by two, I still have to confirm this observation on the long term.
View 1 Replies View RelatedI have to reboort my router every day to get back an internet connection? I have a desktop and a laptop plus iPads, etc. The laptop loses connectivity every day about the same time. My only solution so far is to reboot the router. I realize that the client lease time is set to 1 day by default but isn't it supposed to ask the modem for another day of life when this happens?
View 5 Replies View RelatedI'm using a DSL line that changes IP's. I have the E3200 set to auto, but everytime the IP changes, my internet goes down, and I get an ip of 127.0.0.1 on the status page. I then have to renew the ip and reboot. This happens once a day, usually.
View 3 Replies View RelatedI have a 6 year old wrt54g that is working fine but old. I want to upgrade and will go with the 3200 or 4200. I really don't need the extra features on the 4200 since everything I have is hardwired (directly to two laptops and to two switches in other parts of the house for tv and printer). I want wireless for times when we move a laptop but it wouldn't be all the time, and we won't (for now) use the media options. The difference in price between the 3200 and 4200 is less than $25 so costs is NOT a factor in deciding.So should I just purchase the 4200 since price is not a factor or go with 3200; I want the most stable of the two and will never need the extra wireless features in the 4200.
View 8 Replies View RelatedI used to have a Belkin router which was losing connectivity throughout the day for a few short moments. After looking at the logs it appears it was issueing a DHCP release randomy which explained the fault. Since it was old router I decided to replace it with a E3200. This worked fine for a few days but then I started to see similar symptions. So currently I am trying to figure out if it's the same issue as before. I tried looking for a log on the router to see if it was also losing/releasing the WAN IP, but apparently the router doesn't log it. I spoke to a tech rep on chat, but I don't think they understand what I was talking about (how frustrating). I even tried to explain it another way that if I hit the 'Release IP address' button and then hit the "Renew IP Adresss' button does this activity get logged.
Where can I find a log to see DHCP activity (on the WAN interface)? There is a DHCP log which shows all the LAN activity but this is not what I need for this issue. I find it hard to believe a mature vendor like Linksys doesn't log this activity?
House has 2 floors. I want to install 2 E3200, one on each floor, but both with the same SSID/Password, etc. so internet connection/streaming throughout the floor is seamless.
Both floors have network wall sockets ready and they all lead to the same modem/router so all devices plugged lead to the same network.
PS. both E3200 have been update to Firmware Version: 1.0.03
I have bought Linksys E3200 less than month ago.I have setup it, connected HD (WD My Book 1TB) through USB and it work good, without any problem.Than week ago, I turned off the router, because of my vacation. Yesterday, I came back, turned on the router. WiFi was working good, cable connection too. But there was no connection to HD. I had checked information about HD on admin page, router understood that it is HD, but not provided share access to folder, also, there was no button, to setup it.I disconnected HD, tried to connect it using the Cisco Connect, it provided mistake with USB connection to HD and than with HTTP connection to router. I disconnected HD, tried to connect it manually: connect HD -> go to admin page -> refresh to show HD -> admin page freeze... -> reboot of router manually.
There was a lot of tries to connect HD, but all was failed.I connect HD to computer, it works successfully.I checked connection to router through USB, using my card reader and SD flash card, it works successfully.Information about HW:
1. Linksys E3200, last update of firmware for German (was bought using German Amazon) country. (Cannot check it now, if needed will check)
2. Computer: Windows XP SP3
3. WD My Book 1TB (NTFS)
I updated my E3200 to 1.0.04 to try to resolve a wireless dropping issue. Now the connected USB storage no longer responds correctly (very delayed if connecting at all). When I try to provision new storage via the routers admin page, I do not get the permissions page.
View 9 Replies View RelatedI just picked up the E3200 and love it. This morning I hooked up my printer via the USB. Everything went smooth until I tried to print something. I thought nothing was happening, but I let it sit for a while. While I was waiting, I was messing around with my network setting in windows. I realized that my network had been set to 'work' for some reason, so I changed it to 'home'. As soon as I did, my printer spit out my test page. (probably 5 min after sending the doc.) I don't know if it was just coincidence or what, so I sent another page and nothing happened (yet).
Is this common to take that long? Is there a way to speed this up?
is there anyway to configure a certificate between the wireless AP and clients to secure my username and the password.
my setup is WLC5508/AP1142/ACS5.4
I've just bought a linksys E3200 wireless router and it hasnt performed even alittle up to expectations.. As above stated, the router keeps disconnecting me from the internet and i do not know how to fix it. It gets really annoying especially when i have to use the internet to do work.
View 9 Replies View RelatedI recently purchased the E3200 Linksys router. Works great as long as I use IE to browse. Won't let me connect to the web with Chrome.
View 2 Replies View RelatedI just upgraded from a Linksys WRT54G to an E3200.I'm thrilled w/ the bells and whistles (e.g. 5 GHz for video to my Boxee and USB connection to my printer for wireless printing), but it seems that on the 2.4 GHz channel, the strength on the E3200 seems to be lower than it was on the WRT54g.I've placed the E3200 exactly where the WRT54G was, and I notice that on all my mobile devices, I either get no signal or a very week signal in my living room. W/ the WRT54G, the signal wasn't 100%, but it was definately better than what it is w/ the E3200.
I have the latest firmware and have adjusted the MTU down to 1400 (I'd left it at 1500 on the WRT54G and it always worked fine). I've also tried to adjust the 2.4 GHz channel to be Wireless-G only network mode and still no luck. I've tried these individually and in combination.
Is the E3200 just broadcasting a weaker signal at 2.4 the my older WRT54G? Should I return it and get another router or is there something I can do to boost the 2.4 signal? Or is there come other configuration I should try to play with?
New E3200 router (a few weeks old).
Using the manual settings under Status/Router and clicking the Disconnect button (by Login Status), the page reloads, and say I am disconnected.
Without any input from me, about 30 seconds later the page reloads and say I am connected.
Clicking disconnect, closing the tab and testing my connection proves that I'm not actually being disconnected at all. I cannot force this router to manually disconnect.
Is this a firmware bug or is there another setting else where that prevents me from manually shutting down my connection?
Edit: Firmware 1.0.04 build 1 Apr 10, 2012
