Linksys Wireless Router :: E4200 Maximum VPN Speed?

Jul 26, 2011

what is the maximum speed of vpn connection (pptp, l2tp)?

View 2 Replies


ADVERTISEMENT

Linksys Wireless Router :: What Is Maximum Achievable Speed Of E1200v

Nov 11, 2012

What is maximum achievable speed of my e1200v1? Latest firmware is installed. I am using Xfinity Blast (50/10). Wired, i get 52mbps, wireless only 25mbps.I have attempted reflash, WMM disable trick, channel 9 setting and disabling the wireless security completely. Normally, i have my laptop, Droid3 and iPod connect via wireles, but for the sake of achieving max speed, i disabled all but the laptop. wireless connection status displays speed: 144 mbits.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Low Wifi Signal / Maximum Performance

Apr 19, 2011

I've bought a E4200 router because of it's "maximum performance". With the normal settings i have a wireless range of maximum 10 m in the building.  after 5m I've got a low signal.I tested a cheap Netgear-router, which had the same range as the E4200 a 125 Euro.Is my E4200 broke or is it just a bad buy? The settings are standard (that shouldn't be the problem, I guess!?)

View 9 Replies View Related

Linksys Wireless Router :: E4200 When Connected Wired To Router / Maximum Speeds Are 8Mbps

Nov 28, 2011

I just bought a new Linksys E4200, and connected it about an hour ago. I have a 30Mbps internet connection when connected direct to the modem, but when connected wired to the router, max speeds are 8Mbps.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Slow WAN Speed?

Dec 6, 2011

I have a problem with new E4200 WAN speed. I have 1Gb connection from my ISP, and my old Netgear router gives me about 350 Mbps WAN speed, but with new E4200 I only got 110 Mbps max download speed.Cisco live support tried suggested to change MTU from Auto to 1400 (and try different wlan channels, even that I don't use wlan). This MTU size change makes no difference with WAN speed. I have latest firmaware installed, router reseted several times,  tried different cables etc. Also with same cable sets my old Netgear still gives about 3 times better WAN speed.WAN port (and all LAN ports) seems to negotiated at 1000 Mbps at both ONT (optical network terminal) and Linksys settings page, but unfortanately there is no way to change the setting from auto to manual at E4200 settings (and it is not possible to change any settings of ONT by user). I was thinking that if somehow it won't auto negotiate properly (even if the setting page says its ok) but maybe it actually negotiated 100 Mbps port to WAN.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Keeps Dropping Speed

Nov 11, 2011

Had E4200 for several months worked great. The last 3 weeks speed drops intermittently through the day.Up graded to latest firm way yesterday 11-10-11 still have the issue, i.e. first thing this am had 15mbps and 1 hour later was below 1mbps. Have not added anything new equipment or software wise in the house during this time.

View 2 Replies View Related

Linksys Wireless Router :: E4200 V2 Terribly Low Speed

Aug 28, 2012

Just purchased the new E4200 v2 device, 1 day of testing on different modes give me that:Direct connection without router: urls....Changing Qos didn't work at all.Testing on Ver.2.0.37.131047. Cisco what's up with you?

View 9 Replies View Related

Linksys Wireless Router :: E4200 Speed Is Limited Between 3 And 7 Mo/s

Aug 18, 2011

i have installed a e4200 with a computer connected by Wiffi N300 and two nas connected by Gb LAN. When i copy files from nas to computer or computer to nas the speed is limited between 3 and 7 Mo/s.If i do same whis a Gb switch the speed is up to 30Mo/s.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Slow Transfer Speed From Usb HDD?

Jun 29, 2011

My transfer speed from HDD which connected to linksys e4200 reach max 2,3MB/s how it is possible to watch fullHD movie if its required minimum 5MB/s? Maybe I should make some adjustments? HDD-WD My Passport 750Gb Also connection speed max reach 144mb/s?? how to make 300mb/s ? wifi adapter is Intel advanced N + WiMax 6250 AGN last driver installed, also E4200 last firmware installed 1.0.0.2 all settings by default Max download speed 75Mb/s by utorrent but provider gives 100Mb/s By cable its ok, max speed 100Mb/s as giving provider

View 9 Replies View Related

Linksys Wireless Router :: Adjust Speed Settings Of E4200?

Nov 24, 2012

Can I do this with a E4200?  I want to do this for gaming reasons, and I mainly want to slow my speed down.  I currently have my console hard wired to the router.  I have accessed the firmware for the router but don't see how to change speeds.  

View 2 Replies View Related

Linksys Wireless Router :: Cisco E4200 Very Slow USB Speed

Feb 26, 2011

I have brand new Cisco E4200 and WD Passport 500Gb.When it connected to router wireless (802.11n 300Mbit/sec) file transfer speed is around terrible 3 MB/sec. Same hard drive directly connected to my Mac Book Pro Unibody produce 30MB/sec. However my internet connection thru the router fairly shows 12MB/sec.It sounds funny, but for me is 4 times faster to download file from the Web rather the from hard dive that I'm holding in my hand.

View 5 Replies View Related

Linksys Wireless Router :: E4200 Dropping Wifi Speed?

Jul 30, 2011

I recently bought an E4200 and noticed that the wireless speed keeps dropping as it stays connected.As soon as I power it on, my iPhone and notebook connect at 54Mb, but as they remain connected, the speed keeps dropping to 48, 36 and one morning, my phone was oscillating between 5 and 11. The iPhone was almost at the same spot, and the signal was around 85~95%. On my 3 year old DIR-300, the speed don't change at all, and it's in a place where I can see around 15 connections. On the E4200 I can only see 2 other networks.I've already tried switching channels, fixed and auto channel, updating firmware and a few other common configurations. At first, I thought it was my repeater, but I turned it off and it didn't work. Turn my cordless phone off didn't change it also.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Very Slow Download Speed

Jan 4, 2013

I usually download and update on my Nas in my house. I conneting my nas to the e4200. My laptop get full wifi from my router, but the speed up and down is very slow. I setup the wireless everything is auto.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Speed 300mbps Goes To 100mbps

Jun 25, 2012

I think i make big mistake to update E4200 firmware from 1.0.00 to 1.0.04.My ISP speed is 300 then i connect pc.Download Speed: 299.22 mbps (37.4 MB/sec transfer rate)Upload Speed: 267.63 mbps (33.5 MB/sec transfer rate)Then connect E4200 With 1.0.00 firmware speed is ~200.But now firmware is 1.0.04 and speed only 100Download Speed: 103.43 mbps (12.9 MB/sec transfer rate)Upload Speed: 101.88 mbps (12.7 MB/sec transfer rate.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Wi-Fi - Only Showing Speed Of 65Mbps

Oct 19, 2011

Just got my E4200, setup and working with my laptop, But its only showing a speed of 65Mbps, How to get it up to the advertised 300Mbps?

View 6 Replies View Related

Linksys Wireless Router :: E4200 Network Connection Speed / Stability?

Feb 8, 2011

my old D-link DGL-4300 was rock steady showing 54 Mbps constant speed (link rate) (in Windows 7 Home Premium 32 bit Wireless Network Connection Status window).  The new E4200 jumps around from 72 Mbps to 114 Mbps to 130 Mbps to 144 Mbps.  However, it mainly stays at 72 Mbps.  I have seen 150 Mbps briefly but I have never seen 300 Mbps.  I have even placed my laptop within 2 -3 ft of the router and have a strong signal (4 bars) but I still have the same link rate issue.  I would think that Windows would show 300 Mbps link rate for my connection when it is that close to the router.  My laptop is a Toshiba with an integrated Intel WiFi Link 5100 AGN wireless adapter.  My son also has a Toshiba laptop with the same wireless adapter but he gets lower speeds than mine due to the fact that he is 50' away in another room in the house.  His connection also jumps around but it is at lower link rates than mine.

View 9 Replies View Related

Linksys Wireless Router :: WRT54G Cascaded To E4200 V2 - Connection Speed

Jun 29, 2012

I have a WRT54G cascaded to an E4200 v2.  I am closest to the WRT54G and connected at 54.  If I am in range of the E4200, can I force a connection to it instead of the slower router?

View 9 Replies View Related

Linksys Wireless Router :: E4200 Cuts Gigabit Internet Speed?

Feb 3, 2012

If I connect wire directely to the PC Ethernet port the Internet speed is about 400 Mbit/sec (speedtest.net)When my PC is connected through the Linksys E4200 Internet speed is not above 90 Mbit/sec.

View 1 Replies View Related

Linksys Wireless Router :: 1.5 Month Old E4200 Link Speed Dropping?

Sep 28, 2011

 I've had my 4200 for about 1.5 months now and it was working great until 8 days ago.  I was playing WoW over wireless (like I always have) and noticed that I was lagging a bit.  I brushed it off as possibly my internet connection.  The next day I was surfing the net and at random times webpages wouldn't load or would take longer to load.  I checked my wireless connection properties in windows and noticed that the link speed drops out every now and then.  It'll start at 54Gb (only have G in the house, so I disabled the 5GHz and set 2.4GHz to B/G only), then it'll drop to 48, 36, 11, 1.  Meanwhile the signal doesn't drop a bit.  I'm still connected to the router just the link speed drops out and it just started.  It's very annoying having to go old school and hook up wired on my laptops just in order to chat online or anything. I'm still using v 1.0.0 firmware, so I guess I could try upgrading to .03 and see.  But I personally doubt that is the issue since this just randomly started happening.  I ordered the router through newegg.com and I do not have the box for the router anymore so I don't think I can return it.  And I can't be without a router for 4-6 weeks while Linksys/Cisco repairs mine.  

View 5 Replies View Related

Linksys Wireless Router :: E4200 Speed Drop Using Ethernet Cable

Oct 4, 2011

I'm pretty new to networking.  Purchased a E4200 for my home line.  When i connect directly through the modem i see speeds of about 600mbps but when i connect through the router via an ethernet cable on an empty port on the back of my e4200 my speeds drop to about 180mbps.  I expected a speed loss going through wireless but why i am experiencing a speed loss by using the ethernet as a passthrough?  I thought the ethernet ports on the e4200 were gigabit and support up to 1000mbps? 

View 1 Replies View Related

Linksys Wireless Router :: What Is Maximal Speed For E4200 L2tp Protocol

Oct 15, 2011

What Is Maximal Speed For E4200 l2tp Protocol.

View 1 Replies View Related

Linksys Wireless Router :: E4200 N Clients Connect At Half Speed

Sep 16, 2011

I've just set up my E4200 and none of my wireless N clients connect at full speed. Irrespective of what wireless settings I use they all seem to connect at around half speed. My laptop for example insists on connecting at 144.4 Mbps though it supports 300 Mbps. Periodically it will connect at 300Mbps, but the next time the I reconnect or I make a settings change on the router (irrespective of what the change is) the speed drops back to 144.4. Clients that support 150Mbps connect a consistent 65Mbps.I'm running FW 1.0.02, though the problem existed with 1.0.01 (I hard reset before and after upgrade) and I've tried re-flasing the 1.0.02 firmware.Any combination of channel, width, mode and security type etc doesn't seem to influence the performance. Nor does distance (the client above is 3ft from the router).My previous router was located in exactly the same place as the E4200 and I had a solid full speed connection all over the house.

View 6 Replies View Related

Linksys Wireless Router :: E4200 Downlink Speed Limited To 6 Mbps

Dec 30, 2011

I posted this in the wired forum, because it's the wired speed that is limited, but it looks like there's more E4200 expertise over here, so here it is again:
 
I have Hotwire fiber service and the plan is supposed to provide 20 megabit downlink speeds.
 
I just bought a Linksys/Cisco E4200 to replace an old Dell TrueMobile 2300 from 2004.  With that router I got the full advertised downlink speed.
 
Now, when I run a speed test with the E4200 in place, the downlink speed is only 5168 kbps or so.  Watching the speed test meters, I see the data arriving in bursts, every few seconds a whole lot of it gets through, then for a second or two nothing.  It's pretty regular.
 
But, if I run a speed test with the ONT cable plugged right into  a laptop, I see 19001 kbps - close enough to 20.  This is the same cable that plugs into the back of the router.
 
With E4200 in place Direct into laptop what I can check or configure in the E4200 to change this behavior? 

View 4 Replies View Related

Linksys Wireless Router :: E4200 1.0.03 Slow Usb Storage Transfer Speed?

Nov 20, 2011

i have a newly formatted (i.e. empty) 2TB WD my book elite which when i connect it to my computers usb port, can transfer a 6gb video file at over 100MB/s according to the win 7 detail box. However, when i connect it to the usb port on the back of the e4200 and try to transfer the same file, it only goes at 8MB/s max ... it appears to be going at usb 1 speed.  i've got the latest firmware on both the e4200 and the my book 1111 and everything seems to be working fine for both, except this transfer rate when connected to the e4200.granted, cisco doesn't specifically list this drive as being tested, but the router does recognize it and shows it as usb 2.0, but yet the transfer speed is just too slow.8MB/s is just not workable...i could just connect the drive directly to the computer and share it that way, but connecting it to the e4200 was one of the reasons i bought the e4200.

View 8 Replies View Related

Linksys Wireless Router :: Low Speed Connection E4200 With Both Bands Enabled?

Dec 13, 2011

When I have both 2,4 and 5,0 GHz band enabled on the E4200 router my PC (WMP600N-PCI adapter) has max. 130Mbps.When I enable only the 5,0 GHz band it has a speed of 270Mbps.The same speed issue with my Dell laptop.Router and PCI adapter are new (3 days old) and both have the latest firmware.Both PC and laptop are running on W7.how to increase the speed with both bands enabled?

View 6 Replies View Related

Linksys Wireless Router :: E4200 / Firmware 1.0.03 - Internet Speed Maximized

Oct 6, 2011

It is the router Cisco Linksys E4200.

My situation before I bought the router:
- my Internet speed is 120/20 (Mbps download / Mbps upload)
- speed test with my ISP gives 125/20 for 99% of the tests- speed test with [URL]  gives 125/20 for 99% of the tests
- I never have had a router; my PC is connected directly to the cable modem
- My ISP is Vidéotron from Quebec in Canada : [URL]

My new situation with the new router :
- last Tuesday, I bought the router Cisco Linksys E4200
- the installation  went fine and Internet works well
- during the installation process, the firmware is upgraded to 1.0.03
- speed test with my ISP gives 100/20 for 99% of the tests
- speed test with [URL] gives 100/20 for 99% of the tests 

My observations :
- according to router status port, Internet port is 1 Gbps
- according to router status port, port  1 (where my PC is connected) is 1 Gbps
- it seems that speed cannot get more than 100/20 with the new router
- when I disconnect the router and I reconnect my PC directly to the modem cable, I still get 125/20 

Calling Cisco support :
 - Many tests are done during 3 chat sessions
- The speed is still 100/20
- The recommendation is to replace the router with a new one  

Friend support :
- A friend of mine brought his router which is the same as mine- The speed is still 100/20 with his router 

New router  :
- As recommended by Cisco support, I got the router replaced from the store.
- I installed the new router
- During the installation process, the firmware is not upgraded; the firmware is 1.0.01
- The speed is now 125/20
- I upgraded the firmware to 1.0.03
- The speed is now 120/20
- I downgraded the firmware to 1.0.01
- The speed is now 125/20

Conclusion :
- My speed is maximized at 100/20 with the firmware 1.0.03
- I will stay with firmware 1.0.01 until firmware1.0.03 is corrected.

View 8 Replies View Related

Linksys Wireless Router :: E4200 V2 Broadband Speed Drops To About 6 Mbps

Nov 5, 2012

I'm running a Cisco E4200V2 router with the latest firmware (2.1.4.12284) on an iMac running OS X 10.8. My ISP is providing 15Mbps to my modem, which I've confirmed by connecting directly to it without the router. Once I put the router back in the path, my broadband speed drops to about 6 Mbps. Is this the best I can expect from this router?

View 2 Replies View Related

Linksys Wireless Router :: E4200 Best Way To Measure Actual Connection Speed

May 2, 2011

Soon my town will be getting fiber to the home, so I've already upgraded my home network to handle this. One of the changes is that I'll no longer use my powerline adapters to stream video, but to transfer the IPTV data. For streaming I wanted to switch to Wifi, so I bought the E4200 and compatible adapters and bridges (see subject).The powerline adapters have a bandwidth of 200Mbps, of which I get an actual 120. This works fine except for full 1080p, that stutters. The E4200 has a maximum of 450Mbps, but the adapters and bridge only do 300, but that should be sufficient. So after replugging my network, I tested it last night by playing a 350MB 45 minute episode of a TV series... And it stuttered!
 
Doing the math, that would mean the connection was less that 1Mbps! The WUSB600N and E3200 were (direct line) about 4 meters apart, separated by a concrete floor. What is the best way to measure the actual connection speed?And more important; since the E3200 does both 2.4GHz and 5GHz, how can I tell which band the adapter is using? I want to use the 5Ghz band, since that is fairly empty compared to the 2.4Ghz. However, I've configured both with the same ID, as the E4200 manual instructs, but I think it may be better to separate them?

View 6 Replies View Related

Linksys Wireless Router :: Slow Download Speed When Hardwired To E4200?

Apr 14, 2012

Im trying to optimize my E4200 settings and Ive noted that ping and download speeds are extremely slow for the internet service I signed up for. Ping speeds are consistently more than 1000ms and dowload speeds typically are less than 3Mbps. These are for both wireless and wired connections to the E4200 router.
 
When I disconnect the router and hardwire my laptop directly to the the modem, ping speeds are less than 100ms and download speeds are 20Mbps.
 
Simply put, webpage loading is at a snails pace with wireless and wired connection the router, but blazing fast when hardwired directly to the modem.
 
On a seperate issue, the iMac I have is also **bleep** slow even when hardwired directly to the modem. Is there an obvious router setting Im screwing up?  Router is updated with the latest software.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Poor Qos Upload Speed Detection?

May 31, 2011

Enabling auto detection of the upstream bandwidth in the qos tab results in a significantly lower than normal maximum upload speed? I have the Blast plan from comcast (20/2 sustained; 30/4 with powerboost). Here are the results.
 
With the Qos OFF:

View 9 Replies View Related

Linksys Wireless Router :: Cable Speed Faster Than Direct Hookup E4200?

Nov 8, 2011

Have high speed cable and find that the wireless speeds using Speedtest.net are faster than when hooking directly into the E4200.  Do I have something set incorrectly?

View 3 Replies View Related

Linksys Wireless Router :: E4200 - Force A Specific Speed For The Local Ports?

Sep 14, 2011

Is there a way to force a specific speed for the local ports?  I'd prefer not to rely on the autonegotiation. 

View 5 Replies View Related

Linksys Wireless Router :: Slow Speed (50mb) When Computer Connected To E4200

Jun 30, 2012

I have the E4200 with latest firmware . When I connect my computer to the E4200 and that to my modem im getting about 50mb speed. If I disconnect the E4200 and connect my computer straight to the modem I get about 95mb speed?I have the Virgin Broadband 100mb service and all is working fine at their end.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved