WRT54G v6 router suddenly cuts out several times each day, using it with wired connection on two computers. No problem when direct wired to the modem. Is this router failing? How to fix it?
View 4 RepliesI have a wrt160n v3. This is the 3rd one - both the first 2 were defective. I have spent approximately 8 hours troubleshooting the other 2 only to be told they're defective. So, I got a new one. Now, this one keeps cutting in and out. I want as my iPhone constantly switches from 3G to wifi on and over every minute. It really ticks me off! What can I do to fix this? This is a different issue than the original one (very slow) and 2nd (no signal). It's disappointing for a $90 router to do this. I also see the wireless icon on the router flash.
View 6 Replies View Relatedmy internet connection cuts in and out so my computer cant connect to the router and it wont show up. I am on a windows 7 toshiba laptop and i have comcast as my internet service provider.
View 1 Replies View RelatedTelefonica router (this my internet provider) --> WRT12N --wireless/eth--> my laptop
With that configuration I get a 1Mbps band with But in this configuration Telefonica router (this my internet provider) -- wireless/eth--> my lapto I get 7Mbps.Using always the same port of my telefonica router.Why the WRT120N is not providing the whole bandwidth? Is there any option in the router that divide the whole bandwith (7Mbps, almost 8Mbps) among the four ports of the wrt120n (giving 1Mbps per port)
I just signed up for Charter's Ultra 100Mbps internet service. We confirmed it worked at that speed by connecting my Lenovo T520 laptop directly to the Motorola Cable modem. I acheived just over 102Mbps throughput down.Next, I plugged in the e4200 (v1) router to the modem, and the computer directly to that (wired), and the max performance I could see was right around 52Mbps. Wireless performance on wireless-n, 5Ghz, maxes out at around 42Mbps.I am concerned about the throughput dropping from 102Mbps to 52Mbps while directly WIRED to the router. That tells me that the router is definitely capping my throughput. I have turned off QOS, found the optimum MTU of 1468 (used the ping -f -l 1440 [url]...) to find the largest MTU that didn't spit out a fragmented message, and added 28 to that.
I am a bit baffled that this top of the line router which some have claimed to see >100Mbps performance over wireless alone, isn't able to achieve any higher than 52Mbps wired. I do have other devices plugged in, but none actively transferring. What could be capping the throughput? The router worked fine on 25Mbps service, but it seems unable to handle 100Mbps service.
I've got a problem with my new Linksys E1200 (v1) router. It cuts the bandwidth of my PPTP connection with ISP (which is 50 Mbps) down to about 12 Mpbs. My firmware is the latest one (v1.0.03 build 4). I've done some reading and found out that it's pretty common problem between Linksys E-Series routers and ISPs that use PPTP/L2TP.
View 4 Replies View RelatedI did a test to check the speed of my connection with my PS3. First I checked the speed straight from my internet providers modem and I get 18.9 Mbps. Then checked it through the Valetplus router and the speed results are 8.5 Mbps. Both tests were wired in with same cable. Why this happens and if that is common with wifi routers?
View 2 Replies View RelatedIf I connect wire directely to the PC Ethernet port the Internet speed is about 400 Mbit/sec (speedtest.net)When my PC is connected through the Linksys E4200 Internet speed is not above 90 Mbit/sec.
View 1 Replies View RelatedI have a cordless phone which broadcasts on 2.4ghz - when the phone is being used it cuts out the wifi. I thought that with the E2500 being a dual band - I wouldn't have this issue as I thought the router would switch to the 5 Ghz frequency if there was interference on the lower band. Maybe I am not understanding how the dual band works.
View 3 Replies View RelatedI have wrt610n that i have wd 1 tb drive hooked to usb port and when i try to copy large folder/files to it, i get the dreaded- cancel, try again skip and it locks up solid. i have treied all settings in these and other forums. i have tried two different brand size hard drives, i have tried wireless and wired and nothing. is there a fix for this. i have latest firmware on everything, i have everything set tweaked best as they can and not one things makes a differance. all i get from linksys is try this try that. is there a way to copy large files to hd first via the pc then hook back to the router to see the files?
View 1 Replies View RelatedI'm looking to upgrade my WRT54G as I have had NO luck in getting my Galaxy Tab to connect through it so far (can connect and get an IP address but can't get out to the web) and have had intermittent problems with my Blu-ray lately. I am looking for something with the best affordable range, live 3 floors down from the current one and get about 3/4 signal strength so there's not much interference it seems. I watch a lot of online content through Hulu, Netflix, and LMB games and share with 2 other people.I am looking at the E series, probably the E1200, 1500 or 1550 as they seem to meet my needs. Any users have any advice about the ease of install and use of either of these? Or would it be better to get a gateway as we are considering going from DSL to U-verse service, twice the speed for $2/month more
View 6 Replies View Relatedi got this wireless router (linksys version WRT54G) from my aunt but she can't find the disc for it. is there a way to use it without buying anything (this is mainly for my wii), if so how?
View 2 Replies View RelatedI have an old wireless router lying behind me and I want to use that old router as a switch. That old router is a knock-off,no-name router brand called "Gigafast" and the model number is WF19-CAPR. There are also variants to that router name as well.The router that I currently have is a Linksys WRT54G wireless-G router. I'm planning to upgrade the wireless router in favor of Wireless-N in the near future.I want to know how can I use that particular Gigafast router as a switch and I want to link that router up to my WRT54G router. The scenario goes as follows:
Cable internet connection ----> WRT54G router ---> Gigafast router (as a switch)
The IP address for the WRT54G router is 192.168.1.1, while the Gigafast router is 192.168.1.254. I may know by now that I have to disable DHCP on the gigafast router and I have to change an IP address to something that is "not in range" with the WRT54G router, am I right?I want to expand the number of ports, so I can connect with future devices such as a VoIP ATA adapter, a laptop and possibly an entertainment box (i.e. Apple TV or Boxee box)
I have lost the start-up cd for my router, where to find a downloadable one so i can hook up my router.
View 1 Replies View Relatedhave one router WRT54G with firmware version v2.02.7, Feb. 27, 2004, and I'm trying to use this router to get my PS3 connected to the internet, but in the PS3 appears that I'm using NAT Type 3 and to enable some online features in my PS3 I must change it to NAT Type 2 (from the router configuration), I tried everything that I found (put my PS3 in DMZ zone, enabling TCP/UDP ports, enabling/disabling UPnP, disabling Media Server Connections in my PS3, etc.) and nothing works,
View 3 Replies View RelatedOur office has 2 connections to the internet. Each connection comes into our building through a Linksys WRT54G router. I like to connect the routers together through their ethernet ports so that we can share resources such as printers and etc. Should I config each router such that they are actually on the same network? For example:Router 1:Router IP 192.168.1.1DHCP serves 192.168.1.100-150Router 2:Router IP 192.168.1.2DHCP serves 192.168.151-200
View 2 Replies View RelatedI can not find the CD for my WRT54g router. Is there any place to download the setup info?
View 9 Replies View RelatedI have a WRT54G wireless router that I haven't used in years because my old cable provider supplied me with a router. I recently switched cable providers & they don't provide a wireless routers. I would like to use my WRT54G router, but I don't have the cd. I figured it wasn't a problem because I can just do a manual setup using the ip address 192.168.1.1. I receive the pop up window to enter the user name & password. I follow the instructions & just type in the password field the word admin & l left the user name blank but it doesn't work.
View 4 Replies View RelatedI have a few devices at my home that connect wirelessly to the internet via wrt54g. I want to connect to the internet via VPN. I would like to find out if it is possible to connect WRT54G router to the VPN via PPTP or L2TP? The VPN company provided me with PPTP and L2TP credentials. I can access vpn via OpenVPN on computers but I would like my TV connect to the internet also via VPN.
View 5 Replies View RelatedMy 'network' looks like this:
CABLE MODEM ===> WRT54G
WRT54G Port1 ===> PC
PC is running Windows/XP sp3 with all updates installed. It has no wireless adapter.WRT54G model number sticker shows ver.2. I don't think the firmware has ever been upgraded.This used to work. What has changed? The laptop that used to connect wireless is dead. I now have a 2nd PC that sits on the same table as the old PC. It has no wireless adapter at this point, but eventually either it, or the old computer, will be getting its internet connection wireless-ly, as the computers will be physically in separate rooms. I can't see how these changes would affect the operation of the router.
I have a WRT54G router that's worked for a very long time. I had WEP security set up and it worked fine until recently. About a week ago my three year old son managed to reset the router (I'm still not sure how). When I go onto the web-based setup page I am unable to change the wireless security setting. I select an option from the drop down menu but then the page reloads and nothing has changed.
View 1 Replies View RelatedA few days ago I lost connection to the internet. The Status on the 54g does not show an IP address from the WAN(cable modem)If I connect the cable modem directly to the computer(wired) I can get online no problems. I can also access the 54g through 192.168.1.1. (wired)But if I connect the Cable modem to the 54g....no Internet This was my bootup.
1. Unplugged both cable and router.
2. Plug in cable wait for solid lights
3. plug in router wait for lights
4. plug in computer...connection established to router.... No Internet
I have a Model #WRT54G-V8 Linksys Router. I never set a password to keep my neighbors from accessing my router. I no longer have an Manual either. set a password or a manual to do that ?
View 1 Replies View Relatedhow i should set up my new valet m-10.Im currently using a WRT54G as my main router connected to my modem in my home office, and a WAP54 set up as a repeater in the living Room. We have multiple devices still using Wireless G, and a few that have Wireless N so im wanting to use the valet just for my N devices and My WRT54 & WAP54 for the G. So do I just cascade the valet off the WRT54? or should I make the Valet the main Router and cascade the G routers? the reason I have the repeater is because the wireless signal is weak in the living room and bedrooms.
View 1 Replies View RelatedI recently set up a wrt54g router that I got used from a friend. I pressed the 'reset' button on the back, configured it for my computer according to the instructions on the website, and everything worked fine for a couple of days. Then I lost connectivity, tried powercycling my modem, but had to reset and reconfigure the router again. Worked fine again for a couple of days, then the problem repeated itself, so I reset and reconfigured again.
View 1 Replies View RelatedSetting up a passcode for my router. I have searched online but so far have not been able to find anything.
View 1 Replies View RelatedI'm trying to set up my sons I pod touch to my router i have the wrt54g v6 and it won't connect?
View 7 Replies View RelatedSituation: I have one Internet connection and I have need of two networks. One filtered with OpenDNS and the other unfiltered. I have a Speedstream DSL router provided by ISP for connecting to Internet. I have two WRT54G's and would like to utilize them to form two networks. The Speedstream is a router with a gateway address of 192.168.1.254.
From that Speedstream (only one network plug) I would like to go to a 5port switch. From that switch, I would like to configure the two WRT's to be two different networks (one using OpenDNS settings for filtering) with one having a 192.168.1.x address scheme and the other (no Internet filtering) having a 192.168.10.x scheme. Both would have DHCP enabled for their networks and the Speedstream would have DHCP disabled. There is not a need (at this point) to have the networks communicate.
Ive had a WRT54G v5 for awhile now. And just recently I went out of town and had turn off my router. When coming back and turning everything back on for some reason both wired and wireless components both have a connection then it loses the connection for awhile and comes back on. Ive power cycled both the router and modem. Called my provider and they said it was my router after doing some diagnostic tests. I tried to update the firmware and ive tried to restore to factory settings. Still it has a connection then it loses it.. Ive noticed on the modem when its not working that only the SENT light is flashing. (modem has power,received,sent, cable,pc). It is on AUTO DHCP and gets a ip and everything.
View 1 Replies View RelatedThis router was given to me without any documentation. No one knows what the password is for the wifi or web interface. I have tried to reset the router to factory defaults without any luck. I have tried regular reset method and 30/30/30 and still it is holding on to the custom settings. Here is what I know:
1. The router can be pinged without any errors.
2. The logon screen comes up requesting username and password. I have tried all of the default inputs (blank/admin, admin/admin).
3. The wireless is working and the SSID is Linksysxx.
4. I tried the following:at the DOS prompt typed cd then, TFTP -i 192.168.1.1 PUT (my fw).binunplugged the router, plugged in and hit "Enter"After about 15 seconds I got the error message, "Invalid Password". I tried this again and got the same results.I know the router is working, but I can not get it for go back to factory settings.
Two days ago I was able to type this in my browzer (Safari, Macintosh) and open the page. Now for two days I have tried this again and get a massage that the server at this location (192.168.1.1 ) is not responding. How can I get onto this page. I need to change the settings on my WRT54G V8.
View 9 Replies View RelatedI have a WRT54G router and although the local connection works the wireless does not. I have tried unpluging the router and replugging, holding the reset button for 30 seconds powering off 30 seconds and then plugging back it for 30 seconds. The ipconfig /all is below.
Windows IP Configuration
Host Name . . . . . . . . . . . . : TN-PCPrimary Dns Suffix . . . . . . . :Node Type . . . . . . . . . . . . : HybridIP Routing Enabled. . . . . . . . : NoWINS Proxy Enabled. . . . . . . . : NoDNS Suffix
[Code].....
I have a WRT54G wireless router v7.2.00 (defoult firmware)in here last firmware is 8.2 [URL]i download this file, but can't install... then i find this...[URL] in here last version is v7.2 now can you tall me, can i upgrade v7.2.01 to v8 or v8.2?
View 2 Replies View Related