Linksys Wrt54g V2 Configure As Access Point?
Nov 28, 2012I don´t really have the RJ45 cable, how to configure it as an access point wirelessly? I mean,just by entering the main menu with the default ip address.
View 1 Replies
ADVERTISEMENT
Linksys Access Point :: WRT54G - Unable To Find Access Point In Home Network
Aug 29, 2009I just bought an LG Bluray DVD player (BD390) which is unable to find the access point in my home network.My router is a WRT54G, ver. 2.2, running firmware: Ver.4.21.1. My home network uses high speed cable with two computers on the wireless network, all working with no problems.The router is on the second floor but the two computers and the new BD390 are on the first floor - about 35 feet away. I have the wirelss security set to none and use only the specific computer MAC addresses to allow connection to this network.
Â
I found directions in the forum for a setup using the LG BD390 but with a different Linksys router. I changed the security to WPA (AES); the Beacon interval from 100 to 75; the Fragmentation Threshold from 2346 to 2304; and the RTS Threshold from 2347 to 2307. The DVD wireless connection still failed to find my network. There is a "Push button" connection feature on the BD390 setup which I tried, but the only "button" on the router I could find was in the basic wireless setting, a green icon for the wireless SSID setup. No connection was made there either.
Â
The recommendation connection from the LG manual is for a network cable, but that would be over 50 feet and a real pain to connect, so I would prefer WiFi.Â
Linksys Access Point :: Connect And Configure WAP54G Access Point To New Cable Modem?
Nov 1, 2012How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.
View 1 Replies View RelatedLinksys Access Point :: Configure WRT120n As An Access Point?
May 1, 2012Is it possible to configure WRT120n as an access point?
View 1 Replies View RelatedLinksys Access Point :: Bridge Wrt54G To WAP54G?
Mar 28, 2011According to the information on the bottom of the WAP54G setup screen it can connect to the WRT54G without another WAP54G. What I want to do is use the WAP54G as a bridge to connect my DVD player with an Ethernet connection to the internet via the WRT54G. Both units have the latest firmware updates. When I set it up as I believe it should be the WAP54G has all the lights on but the DVD player cannot connect to the internet.
View 5 Replies View RelatedLinksys Wireless Router :: Use Wrt54g As Access Point?
Dec 11, 2011I am using a newer wireless router but would like to use my older wrt54g router as an access point (wired and wireless) at the other end of my house. how to do it, and what the specific settings should be, especially the security settings. I can connect the wrt54g via a homeplug (cannot run a LAN cable). I had previously tried an Aztech wireless homeplug but found the security feature to be worthless and everyone was able to "break-in".
View 3 Replies View RelatedLinksys WRT54G Setup As Access Point On Wireless Network?
Jun 28, 2011I have a 4 year old Linksys WRT54G V8 I'd like to set up as an access point for an Xbox 360 or DirecTV box. I am using a Linksys E3000 as my wrieless router, atm, and was wondering if there was anyway to use the WRT54G as an access point before I go out and buy other network adapters to get these devices connected.
View 2 Replies View RelatedLinksys Wireless Router :: Make WRT54G An Access Point Only?
Nov 25, 2007I need to make my WRT54G an access point only. I tried information contained on Linksys site, but I can't seem to get it to work.
View 9 Replies View RelatedLinksys Access Point :: How To Setup WRT54G In Router Mode
Jan 20, 2007How to setup WRT54G in router mode
View 9 Replies View RelatedLinksys Access Point :: Connect Directv With A Wrt54g And Wap54g?
Feb 25, 2011I have a linksys wrt54g ethernet wired to my router. I got a wap54g and don't know a thing about either. I hooked up the wrt54g years ago with linksys assistance. I thought I could just hook up a wap54g with ethernet to the directv dvr and the two would talk.
View 2 Replies View RelatedCan't Access Linksys WRT54G Set As Access Point
Jun 7, 2011I set a Linksys WRT54G router up as an access point connected to a D-Link DI624 router. When I set up the Linksys, I connected it directly to my computer and changed the IP address to 192.168.1.2 and disabled the DHCP. I then disconnected the Linksys from the computer, connected it with an ethernet cable from a LAN port on the Linksys to a LAN port on the D-Link and connected the D-Link to my computer. Both routers work perfectly but when I try to access the Linksys settings from my web browser it will not let me. I don't even get the login screen. When I run a diagnostic on the problem I get the following message:Your computer appears to be correctly configured, but the (192.168.1.2) device or resource is not responding?
View 3 Replies View RelatedLinksys Wireless Router :: WRT54g Can't Get Devices To Connect To Access Point
Oct 22, 2011I have a WRT54g with Tomato firmware. I am trying to set up a WAP54g to extend the range but while that access point does show up as a network, nothing can connect to it. I already have the router's MAC address put in the WAP. I think the problem is that I have Tomato on the router and that conflicts with the default firmware on the WAP. Range isn't really the problem, I just need to strengthen the signal in a specific area that it's not getting to because of walls. I can't even switch to previous versions of Tomato anymore. I may have just bricked it.Some facts about my setup-My modem has default settings: PPPoE connection with a DHCP server enabled.-I set the router to use DHCP and put it in "Access Point" mode.
-The WAP is set to repeater mode and it was set to Static IP configuration by default. I simply followed the instructsions here: url....
-There are three different MAC addresses: The WAN, LAN/router, and the Wireless. I put the Wireless MAC address in the access point. Is that correct? 
-My desktop is wired directly to the router and it has a static IP outside the router DHCP's IP range-UPnP is enabled by default in the modem and router, but I'd like to try to get this working rather than buy all new equipment.
Linksys Wireless Router :: WRT54G In Access Point Mode Impossible
Jul 18, 2011I have a network with 2 WRT54Gs in it. One in the besement connects to my cable modem and serves as a gateway and DHCP server as well as a wireless access point. That WRT54G is perfectly accessible. I have another in my room set up as a router and access point only, connected by its ethernet port to the gateway. This one proves a bit trickier. Thet network works flawlessly, and if I couldn't see it sitting right there I would doubt it even existed. I can't ping it (I forgot the IP but tried all the ones that seemed logical), it doesn't show up in my network map, etc. From what I gather that's how a switch is supposed to work. But since this is also a managed router, I would think there should still be some way to connect to it to administer it. How can I log in to this router to change settings if I need to?
I'm not sure if maybe 192.168.2.0 is the other router or if that's some kind of special address (My network is on the 192.168.2.* subnet, don't even ask why...). I've seen it in other posts about routing tables but they all had it routing to 0.0.0.0 instead of the router's own IP. I tried pinging 192.168.2.255 and got no responses at all, not from any computers or from either of the routers, so that was not useful. Tracert from my computer to the gateway doesn't show the router (my computer connects to the gateway through the router).
Linksys Access Point :: WAP54G & WRT54G / Hook Up To Network Wirelessly?
Aug 1, 2012I have a DVR that I am trying to hook up to my network wirelessly. I have the wireless router in the house and can connect to it with my laptop from the shop in the back. Is there a way I connect the wireless access point to the DVR in the shop and see it on the network in the house?
View 2 Replies View RelatedLinksys Wireless Router :: Setup Wrt54g As Access Point To Extend Signal?
Aug 17, 2011how do i setup a wrt54g router as a wireless access point to extend wifi signal from e3200 which is broadcasting the internet?
Â
everyone keeps saying to remove the stock firmware and instal the dd-wrt firmare to do this. can i do this with the stock firmware?
Linksys Access Point :: WRT54G To Monitor All Computers Activities In Home Network
Aug 27, 2006I am using WRT54G, I have 3 pcs connected to this router, some wired, some wireless.I need to monitor from my PC what my kids are doing on their PCs, including website visited, chat, email etc. Which software to use, or do I need to buy additional hardware?I have downloaded a application, however, it needs hub or switches on top of router. And my kids r connected by wireless and if I ask them to change to wired connection, they may not like it.
View 4 Replies View RelatedHow To Configure Linksys E2000 As Access Point
Mar 25, 2011i have just connected my linksys e2000 to the internet now i would like to set it up so other computers can connect to the internet through it wired/ wireless
View 1 Replies View RelatedHow To Configure Wireless Access Point To Linksys Router
Jan 18, 2011How do I configure my Linksys N Router for a Netgear Wireless N Access Point set in repeater mode? Linksys and Netgear are communicating, but no Internet access is available on Netgear which makes me think I need to configure Linksys to provide Internet connectivity to the Netgear access point repeater.
View 1 Replies View RelatedHow To Configure Linksys Router Wtr120n As An Access Point
Jan 14, 2012I have a linksys wireless-N router model number is WRT120N and I need to use it as an access point. How i can do that?
View 1 Replies View RelatedLinksys Access Point :: Unable To Configure WAP200
Sep 17, 2008I'm trying to access the WAP200 for the first time. Instructions say Configure your PC to have the static IP address on the same subnet as the Access Point's default address (http://192.168.1.245). So I assumed i would go to TCP/IP properties and type in IP address and subnet mask and the Utility would open.
View 3 Replies View RelatedLinksys Access Point :: Wrt54gx2 With Srx 200 - Configure WAP54G With A MAC?
Jan 8, 2007I have a wrt54gx2 with srx 200 technology recently purchased. I havetwo cabled computers attached. One at one end of the house attached tothe router by ehternet cable, the other attached about 100 ft by ethernet cable.The wireless does not reach to the other end of the house, most likley because that part of the house is an addition with masonary walls and a large masonary firplace. I bought a wap54g access point at the recommendation from someone at linksys to attach to the end of the ethernet run. Since my set up is macintosh, I can't use the wizard disk that came with the wap54g. Linksys support was not support( not expected), I need to know what to do to get this up and running. I am new to this stuff and Linksys get the wireless router with ethernet installed and up and running with my dsl. I thought the same for the wap54g.
View 2 Replies View RelatedLinksys Access Point :: Software To Configure A WAP54G?
Feb 12, 2007I just took over a position where I had to reset a WAP54G because no one knew the encryption key. In working with some of the wireless access points in the past, I know that they came with setup or utility software to find and configure. where I can get a copy. I couldn't find it on Linksys' site.
View 3 Replies View RelatedLinksys Cable / DSL :: Configure WAG120N As Access Point?
Feb 2, 2012i have 2 linksys modems wag120n and wag320n.i am using wag320n as my primary modem and i want to set up wag120n as an access point to provide internet access in another room. what should be the configuration of wag120n?and yes i have read all the post about this subject and tried it all but since there was no actual solution for this problem i decided to open a new post.
View 1 Replies View RelatedLinksys Wireless Router :: How To Configure WRT400n As An Access Point
Aug 13, 2009I would like to configure it as an access point on my LAN, similar to the way my WAP55AG works.My research on the Internet and on these forums indicate that I have to disable DHCP on the router as well as use the LAN ports to connect it to my network.I am able to turn off DHCP, but assigning it a static IP address is challenging.I can set the IP address, but I am unable to set the subnet mask to 255.255.254.0 as I am only getting a set of SM in a drop down list whick are all 255.255.255.x
View 9 Replies View RelatedLinksys Wireless Router :: Configure E1550 As An Access Point?
Nov 8, 2011how to access an E1550 wireless router's settings and configure it to connect to my wireless DSL router? The DSL phone line is not located anywhere near my TV/DVR/Roku and I'd like to connect them wirelessly to our DSL router. The E1550 is next to the TV/DVR/Roku.
View 6 Replies View RelatedLinksys Wireless Router :: Configure Access Point As Repeater For 2.4 GHz Band On WRT610N?
Jun 22, 2010I'm very dissatisfied with the range and signal strength of my new WRT610N dual band router compared to the WAP54G Access Point I used before.Can I configure the Access Point as a repeater for the 2.4 GHz band on the WRT610N if I use the WRT610N as a Wireless G router rather than wireless N?Â
View 5 Replies View RelatedCan Wrt54g Be Used As An Access Point
Jan 25, 2013Can wrt54g be used as an access point behind a ATT 2Wire Gateway 3800HGV-B? If so, then how would I set one up?
View 1 Replies View RelatedUse Wrt54g As A Wireless Access Point?
Oct 12, 2011i have just found my old linksys wrt54gs router and wna t to know if it is possible to have it as a secondry access point
View 1 Replies View RelatedMake Router WRT54G As An Access Point?
Apr 22, 2011step by step to make my router WRT54G as an access point?
View 1 Replies View RelatedLinksys Access Point :: WAP54G Access Point Setup After A Reset?
Jul 9, 2006I had to reset my access point but the login screen fails to appear to lock the router. I don't have the setup wizard disk.
View 9 Replies View RelatedLinksys Access Point :: WAP54G Possible To Downgrade Firmware From Access Point
Jan 17, 2013I have a WAP54g hardware version 1.0.I install de last firmware on this access-point but, this access-point reset automatic after a random time..It’s it possible to downgrade de firmware from this access-point?
View 1 Replies View RelatedLinksys Access Point :: WRT320N Access Point Vs Range Extender
Dec 14, 2011Have a WRT320N router at one end of the house in the basement. Would like to boost signal to other end of the house. Which product should i use, an access point or a range extender? My house is also wired with Ethernet cable and I could plug the access point into an Ethernet port at the end of the house where the signal is weak.
View 1 Replies View RelatedLinksys Access Point :: WAP4410n MIBs Or OIDs For Access Point
Jul 3, 2012I have AP WAP 4410 N, and I want conected AP to cacti. Where is I faoun MIBs or OIDs for my Access Point?
View 1 Replies View Related