N300 Connecting ADS2 Wireless Router To Ethernet
Feb 8, 2012
I have Netgear N300 (DGN3500) Wireless Gigabit ADSL2+ Modem router.The Router has a phone socket (that is RJ 11 socket) to connect to the Internet. But in my home I have Ethernet socket on the wall. That means the Internet is coming through Ethernet cable. How to connect my ADSL2 Modem router (with the phone socket) to the Ethernet? I bought a ISDN-DSL (8p4c-6p4c) connecting cable and it is not working when the router and Ethernet are connected..I tested my router at one of my friend's place where ADSL connection is available and it was working when directly connected to ADSL line. Unfortunately at my home I don't have ADSL but Ethernet connection.
View 13 Replies
ADVERTISEMENT
Jan 22, 2013
I have an arris broadband modem combo and the wifi signal in the basement is poor I tryed to connect a netgear n 300 wireless router (wnr2000v3) to extend the wifi with an ethernet cable but the neatgear router does not have an internet connection.
View 5 Replies
View Related
Sep 1, 2012
I have recently bought a Belkin N300 Wireless N Modem-Router and am unable to connect it to the internet. My laptop registers the router but the router won't connect to the internet. The router also is blinking a red light.
View 2 Replies
View Related
Mar 8, 2011
How do you connect two routers together to increase signal through the whole house? I am trying to use the n300 as my main router (its hooked to cable modem) and use the 2wire as an access point.The two are connected by a known good ethernet cable.
View 2 Replies
View Related
Jan 26, 2013
I am trying to connect a Seagate Backup Plus 4TB USB HDD to the USB port on my Belkin ShareMax N300 wireless router. The router does not recognize this HDD. I know that the HDD is functioning because it works when I connect it directly to my laptop USB. I also know the Belkin USB port is working because it recognizes a 4GB USB memory stick and a 320GB Toshiba USB HDD. Is there a fundamental compatability problem, or is there some configuration that must be performed (e.g., reformat from NTFS to FAT32, etc.)? I saw some message traffic on the Belkin support site that indicated some issues with earlier versions of Belkin routers using larger HDDs (e.g., 4 TB). My router has a serial number 121026G3101468, model number F7D7301 v1.
View 3 Replies
View Related
Oct 5, 2012
Laptop has 2 ethernet ports and receives the internet via one of those Ethernet ports. Can I plug a ethernet lead from my spare port on my laptop to a wireless router and create a wireless network (via the internet from my laptop)? Is this possible and how do I do it ?
View 11 Replies
View Related
Jun 24, 2011
I just installed windows 7 into my computer and I need to verify my copy of windows. I tried connect my Ethernet wire from my computer to the wireless router but it's not connecting or registering. The wireless router is a WRT54G and I can access the device ip for it but I don't know how to assign an IP address for the new computer. I already had a computer (wired) and a laptop (wireless) connected to the router. I'm using a straight trough Ethernet wire Doing the steps in the sticied post below didn't work because typing ipconfig /release didn't work?
View 5 Replies
View Related
Oct 22, 2011
The last time I had to reconfigure the connections it took me hours!My son had to wipe his desktop clean and reinstall everything. Now when he tried to connect to the internet we can't get a connection at all. My desktop is still working fine as well as the wireless laptops.What do we have to do to get him reconnected?
View 6 Replies
View Related
Feb 20, 2013
The main router is Belkin N300 and the new one is D-Link N300 DIR-651 for extended range.
View 1 Replies
View Related
Dec 7, 2012
I recently got an older dell laptop that doesnt have automatic availability to wifi i had purchased a netgear n300 usb internet thing and it still will not connect to my home wifi how do i fix this?
View 1 Replies
View Related
Oct 9, 2011
I have a 4 port wireless router and a Ethernet router. 4 port are not enough and I want to daisy chain my Ethernet router off my wireless.I have 3 computers and streaming for TV. When I plug one port off my wireless router to my Ethernet router my computer cannot see it. What do I need to configure so my computer can see it.
View 1 Replies
View Related
Dec 10, 2012
I am connecting to internet via motorola modem which gives me approx 6 Mbps download speed when I test it with both speedtest.net and speakeasy.net. Any device that I use connected wirelessly to my Belkin N300 router only acheives about 1.3 MBps of download speed. Is this just the way it is or could I have a router configuration issue or something else?
View 2 Replies
View Related
Oct 20, 2012
I have a belkin surf n300 usb wireless N micro adapter. No problems installing this adapter on a HP Desktop running windows 7. I have tried to install on a gateway laptop also running windows y 64 bit. In device manager it show that the product is working. It will not connect to any network. The adapter is an F7D2102 az ver. 2011az
View 2 Replies
View Related
Jun 13, 2011
My Ethernet cable connecting my computer to my router is not working. It was just working a few days ago and I have connected it to a different computer and it worked on that
View 1 Replies
View Related
Oct 18, 2012
I am having problems connecting my PC (Win7) to my Router (Netgear DGN2000) via ethernet cable.Wi-fi is working fine but I want to speed up my connection using the PC's Gigabit port. Here are the problems:
- When connecting via wi-fi everything is fine
- When enabling my LAN WITH wi-fi still enabled I lose all internet connectivity
- When enabling my LAN and disabling wi-fi lose all internet connectivity
Here is my IP Config when both are enabled :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig
Windows IP Configuration[code].....
View 4 Replies
View Related
Sep 3, 2012
I've been trying to use my laptop (Lenovo IdeaPad Y580) as a wireless adapter for my Xbox 360 by bridging the LAN/Wireless networks and connecting the Xbox to the laptop via Ethernet. The wireless works fine normally, but when I plug the Ethernet cable into the computer, the laptop automatically disables WiFi and changes to a LAN connection. It doesn't give any options whatsoever to reconnect to wireless, just forces me to use the Ethernet connection. As soon as the cable is removed the wireless connection returns, but for what I'm trying to do to work, I need both LAN and wireless to be working simultaneously, and the wireless providing the Internet connection. I've also tried connecting the laptop to a router via Ethernet and received the same result, so I'm pretty sure it's something on the laptop that's causing it. Is there a way to change this so the laptop can use the wireless connection while plugged into another device via Ethernet?
View 4 Replies
View Related
Sep 3, 2012
I've been trying to use my laptop (Lenovo IdeaPad Y580) as a wireless adapter for my Xbox 360 by bridging the LAN/Wireless networks and connecting the Xbox to the laptop via Ethernet. The wireless works fine normally, but when I plug the Ethernet cable into the computer, the laptop automatically disables WiFi and changes to a LAN connection. It doesn't give any options whatsoever to reconnect to wireless, just forces me to use the Ethernet connection. As soon as the cable is removed the wireless connection returns, but for what I'm trying to do to work, I need both LAN and wireless to be working simultaneously, and the wireless providing the Internet connection. I've also tried connecting the laptop to a router via Ethernet and received the same result, so I'm pretty sure it's something on the laptop that's causing it. Is there a way to change this so the laptop can use the wireless connection while plugged into another device via Ethernet?
View 4 Replies
View Related
Dec 29, 2012
I have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
View 1 Replies
View Related
Feb 26, 2012
Child at college having significant connections issues with Sony VAIO VPECB trying to connect to Netgear N300 wireless router. Upped the bandwidth - no impact. Other MACs in the house have no issue.
View 1 Replies
View Related
Apr 20, 2013
Few months ago I have bought Linksys E900 N300 router and its working fine. I also have a USB printer (make: Canon LBP2900) and Laptop (make:Lenovo G580). I want to make this printer wireless and through my laptop and router I want to give prints to this printer. Is it possible to do like this?
View 2 Replies
View Related
Jul 21, 2012
I have a belkin n300 wireless router that i know works because the ps3 connects to it but when i tried to add my desktop to the wireless router i used the installation cd to download onto the computer (which i was then told by belkin tech support that the cd was only for extra stuff like printers..) when i installed the cd it said not reccommended to install because it wasnt windows xp authorized but i did this any ways.. i have also been looking online for diferent things to do to try and get my computer to connect to the router so i have changed things on the computer that i have no idea how to backtrack and take it all back..i tried rrstoring my system to an earlier date and it wont do it. now my computer wont even pick up on a wireless connection.. i then tried to connect directly to the modem (comcast box) and i still couldnt get on internet!
View 3 Replies
View Related
Oct 17, 2012
i have a belkin n300 wireless router and a embarq 660 modem. i wanted to change the password, i don't like the default password. it's too easy to get hacked. anyway, i tried typing the ip address in the address bar of a browser, and it came up a login page, so i created a new login. and then it opens up a page call ZYXEL total internet access solution. it has a lot of setting and button about the network but i couldn't find a button that can change the wireless router's password.
View 3 Replies
View Related
Oct 23, 2011
I need the security key for my NETGEAR N300 wireless router. I am installing a HP wireless printer.
View 1 Replies
View Related
Mar 18, 2012
I am using a Netgear N300 wireless router to stream Netflix movies to a Samsung Blu-ray player with wireless LAN. My problem is that some of the movies are not watchable because of rebuffering. About every two or three minutes into a film it rebuffs. Is this because of my equipment, my set-up, or is it just the nature of the beast?
View 1 Replies
View Related
Apr 8, 2012
We operate a home office network (workgroup) of 6 older PCs running Windows XP SP3.It's a Windows based network using a designated "home" PC as a server, and until recently we were using ethernet cables and a hub/switch for sharing files which worked well because we only share small document files, no music or video.The workgroup does not have a shared internet connection, we don't want or need one for what we do, although the individual PC's can connect to the web using USB dongles just for checking e-mail.Recently the ethernet hub died and I decided to take the opportunity to upgrade to wireless file sharing.None of the PCs have inbuilt wireless adapters so I bought a D-Link USB wireless adapter for each PC.I also bought a Netgear N300 router, thinking that this was suitable entry level equipment for wireless file sharing. Now I'm not so sure.So far I was unable to install the router on the "home" PC because the installation CD seems to assume that the router will be used for sharing an internet connection and does not seem to offer an installation option without a standalone modem. How to install this type of router to create a closed home wireless network without a shared internet connection.
View 14 Replies
View Related
Dec 4, 2012
I have a Belkin N300 router. When a computer is hard-wired to the router, I get about 26Mbps, but all of the wireless devices in my house are limited to about 56kbps. I tried logging into the router to see if there was something "choking" the connection speed, but nothing really jumped out at me. Is there a setting of some kind that could be causing this?
I do have a signal repeater since my house is so big, but there is nothing within those controls that would seem to have that kind of effect either.
View 14 Replies
View Related
Oct 26, 2012
I bought the Linksys E900 Wireless-N300 router this evening in the hopes of hooking up my laptop to my apartment complex's wifi. I'd been previously using an ethernet cable to connect to an outlet which is also the cable connection for my television. I followed the instructions from the CD included, and I was able to successfully connect to the router, but it "cannot determine if I am connected to the internet." I added the device and MAC address to my wifi service account, and still no luck. I've tried connecting the old ethernet cable from the outlet I've been using to the router in one of the ethernet slots, with the provided ethernet cable being connected to my laptop and the 'internet' slot on the router. No internet connection. The recommendation is to "unplug the power cord from the DSL modem." I unplugged the power cord, waited, plugged it back in. Still nothing.
View 2 Replies
View Related
Mar 1, 2013
my netgear wireless router cannot see my n300 usb adapter. it shows as working in my device manager, but the netgear router says wireless not connected. when installing the adapter it said that windows has an icon to the left of the taskbar that i can click on and ask to join a network, which it didnt. it just showed network and an option to open network and sharing center, which i did. there were no wireless networks that showed available for me to log into with the adapter
View 4 Replies
View Related
Feb 27, 2011
I have a Netgear N300 Wireless Router (WNR2000), and I am trying to connect the internet through it. The internet light stays amber, and though the router recognizes it, I can not connect to the internet. My computer also doesn't seem to recognize the router at all. Installation CD will not work either.
View 3 Replies
View Related
Jun 3, 2011
How to connect a Brother wireless printer to the Belkin Surf N300 wireless router? i tried a few times and it wont connect.
View 1 Replies
View Related
Oct 2, 2012
I want to save energy. How can I turn off the Linksys N300 range extender at night. Can just unplug or will this screw things up.Is there a button
View 1 Replies
View Related
Aug 3, 2012
my computer doesn't have a COM port, so i connected an EthernetCOM cable to my laptop (ehternet end) and COM to the switch. Question now is, how can i establish connection?
View 2 Replies
View Related
Jan 18, 2011
I recently had to completely gut my computer and start from scratch, reinstalling windows xp, and all hardware. I only have a basic knowledge of computers, and their inner workings. I had my modem connected to my computer via ethernet, and i enjoyed fast browsing. Since the rebuild, i can only use the usb (and it's sloooooow!). I have learnt all i know about drivers because of this issue.
View 19 Replies
View Related
