Network Share Permissions And Security Groups?
Apr 17, 2013
I have a department network share that has several sub folders within that share. The director of this department doesn't want her employees to have access to everything in said share. We have a blanket security group for the dept that grants read/write access to the share. I tried creating a limited view security group and added it to the permissions on the share (right click the share, security permissions etc) but I am still able to go into folders that I shouldn't have access to.
View 3 Replies
ADVERTISEMENT
Jun 3, 2012
How to share a specific folder via LAN and enable permissions.More specifically, I'd like to share this laptop (Win 7 OS) with my Android PMP and Linux laptop (Mint OS) and grant it "full control" (read and write permissions) without granting "Everyone" control and without adding separate users with pw onto this laptop.(scroll to end of the post to skip details)Let's say the folder that I want to share is called "Bouncy." I right-clicked on "Bouncy", clicked on "Preferences", then enabled " Share.."to "Network Path: \MYCPUNAMEBouncy" and allowed Guest and Homegroup read/write privileges. From my Linux, I "Connected to Server" but couldn't connect.Under "Advanced Sharing" in Windows 7, I clicked "Share this folder" and created a profile under "Share name" => "Share name: Bouncy".I can connect from the Linux, but can't write to the Win 7 folder.
In "Advanced Sharing", under "Permissions for Bouncy", the "Group: Everyone" only has Read permissions. I clicked on "Add" and "Selected the object type: Users, Groups, or Built-in security principles" "From this location: MYCPUNAME". Under "Enter the object names to select" I wasn't quite sure what to write, so I clicked on "Advanced". The search results from "Find names" with these settings yield a ton of names that I'll omit. I first clicked on "MYNAME" in "My Folder": "MYCPUNAME". No access from Linux.I then changed the permissions to "Network", allowed full control permissions and now was able add files from my Linux. Which is good.How do I make it so that only a few specific IP addresses or Users (PMP and Linux laptop) have full control? How do I make it so that a password is required to access from LAN with full control?
View 5 Replies
View Related
May 29, 2011
How can I set up a network with different security levels to different groups?
View 3 Replies
View Related
Mar 15, 2012
I of course have a home network set up. My home network is on the HomeGroup Home1051 --- I have a work PC that I want to be able to use the networked printer on HomeGroup Home1051, but it is set up under a work Domain so I can have full access to work files etc.Is it possible to somehow share the printer on my Home1051 HomeGroup with the work computer on a Domain?
View 1 Replies
View Related
Sep 23, 2011
I have been trying to convince my bosses, the IT department, and others where I work, in a small call center, to switch to a different browser other than IE. The reason is IE times out on the techs a lot and freezes up constantly. I am able to use Firefox and Chrome at the lead station and do not have any issues, but the only browser currently allowed on the techs computers is IE. The reason I am getting as to why this is not possible is that with IE, IT is able to block certain options in IE from being changed such as proxy settings, add-ons, and advanced settings, but that these settings cannot be blocked or managed in firefox and chrome.
View 4 Replies
View Related
May 3, 2012
web authenticate users within a specific Active Directory Security Group. I tried to authenticate over Radius with Cisco Secure ACS and Network Access Restrictions. But NAR only works with Layer 2 authentication. And Web Authentication over LDAP can only be used with User Objects.
View 5 Replies
View Related
Jul 13, 2011
I have a network hard drive (NAS) in my LAN. I would like that a few computers in the LAN were able to only read but not write and the other computers could both write and read. Is there any way I could do this?
View 2 Replies
View Related
Jan 19, 2012
I can no longer add user permissions to a network C: drive - I get an access denied message. What could have happened?
View 6 Replies
View Related
Dec 12, 2011
I created some User Defined Groups in LMS 4.1, now I want to apply certain fault notification groups to Event Sets.
Unfortunately the Groups I configured are not in the Group Selector of the Fault Notification Group: Admin > Network > Notification and Action Settings > Fault Notification Group
View 3 Replies
View Related
May 7, 2011
I've got a business network that I'd like to separate two sets of computers all together (thinking through a firewall rule or other method). Here's a text example of what I want to achieve:
Group A: PC 1, PC 2, PC 3 (can see each other and share files within this group)
Group B: PC 4, PC 5, PC 6 (can see each other and share files within this group)
But Group A & B can not see each other and are blocked from accessing each other.Can this be done with the DIR 655 or do I need to upgrade? Also, these two groups will be sharing the same internet connection.
View 2 Replies
View Related
Feb 28, 2013
i lost the admin security password of my N300 Share modem-router. How can i return to the factory settings ?
View 1 Replies
View Related
Aug 26, 2012
Is it possible to assign a single ssid to multiple interface groups by assigning the ssid to multiple AP groups?
I have buildings geographically dispersed that are configured with multiple vlans in interface groups so that I can maintain an addressing scheme of dhcp assigned addresses per building. Each building is also further grouped as AP groups. I'd like to know if by assigning the same wlan ssid to each of the AP groups, will I maintain addressing integrity for each building? I'm thinking it will work.
Do the buildings have to be outside AP range of each other to avoid problems?
5508 controller
7.2.110.0 code
6 buildings
6 interface groups
1 ssid
View 4 Replies
View Related
Aug 5, 2011
We are facing the problem in ASDM 5.x creates duplicate network object groups in the configuration when PIX with software 7.0.7 is used.
Audit report its showing below commands :
asdm group SALES_ref dmz2 reference SALES object-group network SALES_ref network-object 172.20.7.8 network-object 172.20.10.3 network-object 172.20.11.2
no access-list dmz2_access_in extended permit tcp object-group Network_10.10.1.0 object-group SALES object-group SALES_Ports access-list dmz2_access_in line 200 extended permit tcp object-group Network_10.10.1.0 object-group SALES_ref object-group SALES_Ports
i was created SALES object group 2 month back after that ASDM Automatically created the duplicate object with SALES_ref name and changed the old ACL.
View 3 Replies
View Related
May 4, 2011
I'm working with a 1113 ACS device running the 4.2.0.124 software. I'm trying to get multiple network device groups to use an existing Remote Agent set up for authentication against our Windows domain. For instance, we want our infrastructure switches to authenticate agains the local Active Directory and our WLC to authenticate users agains the same Active Directory. When I try and set both network device groups to use the same remote agent, it fails and reports either the host name is already in use or the IP address overlaps with an existing remote agent.
The question is:
Can I have multiple network device groups use the same remote agent? Or do I have to install the remote agent software on separate Windows servers in order to have different types of devices authenticate against the Windows AD?
View 1 Replies
View Related
Jun 7, 2011
We have set up 1 computer (from now Computer A) running on windows xp as a "server" with other computers in a MSHOME group (from now Computers B -D). File permissions and sharing was set up to allow all remote users (Computers B-D) read and write access. This is however not always appropriate. Is there a way in which we can share a specific file or folder with Computer C (read and write) but not with Computer B and D?
View 4 Replies
View Related
Nov 12, 2011
Any way to get access to facebook yahoo and gmail on bounded network by admin and also using fortigourd by them.
View 1 Replies
View Related
Feb 20, 2013
I have a asa 5510 vpn client groups configured and connected to the internal network DHCP server stops giving network service dhcp and the network goes down.
View 6 Replies
View Related
Feb 7, 2013
I am currently facing a major problem. I am a user of the Smart FTP software and have several files in it.However, the "Sites" folder is showing a blank screen. It shows nothing, when there are supposed to be at least 30 files.
I think I have discovered the cause of this; the "Read" permissions are off. Here is where my problem comes in, when I enable it and select "Apply Changes Recursively", it goes back to the unchecked "Read" permission. It doesn't seem to take into account the fact that I want to enable it.
View 1 Replies
View Related
Mar 18, 2011
I work at a small private school for languages and we have 3 public computers for the students to use for general stuff, internet research, facebook etc etc. Now every week i go to the comps and make sure their running well etc etc but every time there is new stupid things being installed by the students. Anyway, i wanna put a stop to this activity. the computers are not a toy for this lot but a tool and if they need a program for something to come and ask. As it stands the comps are all win 7, and are connected to the network via WIFI. the network is a simple zyxel router. There is another office comp connected to the router running Win XP pro and i also have a spare comp in the office which is unused.
View 3 Replies
View Related
Feb 4, 2011
I have a two computers under the same workgroup.
ComputerA - Windows XP SP3
ComputerB - Windows Vista
I shared a folder on computerA and I am able to access it from computerB. The problem is I want to set permissions for the users of computerB on this folder. Under 'Sharing and Security' -> Permissions, I am unable to change the location. It always shows only computerA. How can I change the location to computerB so that I can set different permissions for users of computerB.
View 4 Replies
View Related
Jan 31, 2011
I have networked two computer with printers attached to each. PC1 is with a brother printer attached PC2 with a HP 1100 attached.In the past I had no difficulty with networking the computers and have access from each computer to each of the printers.
I up graded the computer Susan and I am now having a few problems that I never had before.After I perform the Network Setup Wizard on each of the computers (in many different methods) I am having the following problems.First, every now and then I am getting the following message after double clicking on Entire Network then Microsoft Windows Network:
Entire Network Not enough storage is available to process this command.If I wait a few moments I will get the MSHOME and am allowed to click on that. After this I do see both guy and Susan. If I double click on guy I see items pop up. If I click on Susan I get the following message:
Susan is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path is not found.Of course I can not add the printer from Susan either. Though I have had no problem adding the printer from guy to Susan. And it prints properly.
View 14 Replies
View Related
Jan 8, 2012
Im in the process of trying to setup a home network. Computer A and Computer B are in the same workgroup. Username/password are the same.
Computer A = Windows XP sp3
Computer B = Windows 7 sp1
The two computers can communicate on the network. Can ping back and fourth with ip and computername. Computer B can access from what I can tell the whole C:/ drive from computer A. Doesnt ask for a password or anything like that. Just works the way it should.
However, I cant figure out how to share the C: drive from Computer B with Computer A.
Computer B
Click on C: >> Properties >> Sharing
And this is what i see on the sharing tab
It looks like its shared cause i see the \inteli5c. But when i go onto the other computer I cant access it. This picture doesnt seem to want to work. But that link is the screen that comes up when i try to access the C: from the opposite computer.
View 7 Replies
View Related
Dec 24, 2011
I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
View 3 Replies
View Related
Aug 30, 2011
I have bought a new laptop and added it to my home network , two pc's and two laptops all running win 7. I share all drives on all machines. I know this is not very professional but it works for me.From the new laptop I can see all the network and see all the different drive folders but can only access the user folder on any PC from the new laptop. Also I can see the drives on the new laptop but only access the new laptops user folder from any other PC. I have checked this through a LAN cable and wireless with no difference.As the other PC's can see each other as normal I can only think there's a problem with the set up in the new laptop. I also note when I first try and access any other pc from the new laptop I am asked a domain name and password , I can put anything in these boxes and get to see the network but as I said above only access the user folders. I do have password access turned of.
View 7 Replies
View Related
Jan 19, 2013
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies
View Related
Feb 14, 2011
Even though I am an Administrator on the server, sometimes I create files or folder on a network drive and when trying to access them later (or immediately in some cases), I am getting an "Access Denied" box.For example, I just created a folder, moved an item into it, then tried to rename the folder and was denied access.
View 3 Replies
View Related
Nov 26, 2011
I have a desktop and a laptop. I'm trying to share my external HD from my desktop, to my laptop.What I did was gave the local administrators group full share permissions to the drive, and of course the local administrators group also has full NTFS permission.That being said, I went to my laptop and did a Code:net use X: \mydesktopexternal /user:mydesktopuser PasswordExternal is the share name for the external HD on my desktop. The command worked successfully, however, I am still getting Access Denied when trying to get inside of this mapped drive.How and why does the command map the drive properly, using those credentials, but there's no access when trying to navigate to it? It works if I give Everyone full share permission, but I don't want anyone to just connect to it. Use password protection file sharing is enabled, but of course with "Everyone" given permission, that won't apply (at least to my knowledge).
View 7 Replies
View Related
Jun 29, 2012
I started getting into IT (as a job) a little less than a year ago, though I've been working with computers for close to 20. So networking was never something I was into while working on computers at home. I've been handed a significant position at work and I am learning a lot as I go. I want to know how to grant permissions for a domain user to a directory without adding the user to all of the sub-directories and directories. The only way I've figure thus far is to grant permissions to said folder, then inside remove the "inherit permissions..." but then I have to manually remove the permissions to every other sub-folder.I want to add a single path to a folder by adding single permissions to each folder until the directory in question is reached.
View 2 Replies
View Related
Jan 19, 2011
I have two desktops connected to the internet through wired connections to a router. I also have one laptop that is wireless connected to the internet via the same router. (Also have another laptop running Vista, but not using it right now.) and all are part of the same work group with unique computer names.Desktop 1 can see that there is a work group, but cannot see the computers in the work group. Error message about permissions.
View 1 Replies
View Related
Aug 21, 2011
If Anonymous Disk Access is selected, read-only files cannot be deleted; nor can the file attributes be changed. This is true even if one attempts to connect as an administrator. Unchecking Anonymous Disk Access and logging on as an administrator fixed this problem for me, but I'd think there are 2 issues.
1. Anonymous Disk Access should allow deletion of ANY files. I would expect this to be a "wide open" setting.
2. If Anonymous Disk Access is selected, a valid login should take precedence.
View 9 Replies
View Related
May 18, 2011
I get internet connection with a 3G USB stick and it's working fine. Now I need to share this connection to my laptop with Windows Vista. I'm using a Tenda twl542r+ router to do that. I've configured everything to work fine when I connect the laptop to the desktop comp with ethernet cable, so I can get online with the laptop through the desktop comp this way. But when I use the same cable to connect the desktop comp to the router and try to get a wireless connection from the laptop it doesn't work anymore.
[code]...
View 1 Replies
View Related
Aug 6, 2012
how to share internet ,i have a pc (win xp) connected to internet by lan(dsl) i want share pc internet via bluetooth to laptop(win7) i searched via bluetooth and connected this two device but in laptop (network and sharing center)say "no internet access" i think that i should create "gateway connection" and set ip address in tcp/ip but i don't know how to do it
View 1 Replies
View Related
Jun 9, 2011
One of my Laptop, I cannot see the Network Share Drive from My Network Place. I am using DNS320 Dlink. But I can ping and I can access web base go inside Network Share drive management. But when I try to ma \sharedrivenamefolder, "Error code 0x80070035 Network path was not found ". I already restart the network drive, router and this computer also cannot. Last time we using vbscript to set at startup and let it map automatically when window boot up every day. Other PC with XP all can access. I cannot upgrade vista to 7 because it's from remote site. But now why cannot I don't know what happen with Fuzzy Vista home.
View 3 Replies
View Related
