Use Internet Without Admin Permissions?
Nov 12, 2011Any way to get access to facebook yahoo and gmail on bounded network by admin and also using fortigourd by them.
View 1 Replies
ADVERTISEMENT
File Permissions On Windows Xp
Jun 7, 2011We have set up 1 computer (from now Computer A) running on windows xp as a "server" with other computers in a MSHOME group (from now Computers B -D). File permissions and sharing was set up to allow all remote users (Computers B-D) read and write access. This is however not always appropriate. Is there a way in which we can share a specific file or folder with Computer C (read and write) but not with Computer B and D?
View 4 Replies View RelatedManaging Browser Permissions On Network
Sep 23, 2011I have been trying to convince my bosses, the IT department, and others where I work, in a small call center, to switch to a different browser other than IE. The reason is IE times out on the techs a lot and freezes up constantly. I am able to use Firefox and Chrome at the lead station and do not have any issues, but the only browser currently allowed on the techs computers is IE. The reason I am getting as to why this is not possible is that with IE, IT is able to block certain options in IE from being changed such as proxy settings, add-ons, and advanced settings, but that these settings cannot be blocked or managed in firefox and chrome.
View 4 Replies View RelatedSharing :: Read Permissions Are Not Changing
Feb 7, 2013I am currently facing a major problem. I am a user of the Smart FTP software and have several files in it.However, the "Sites" folder is showing a blank screen. It shows nothing, when there are supposed to be at least 30 files.
I think I have discovered the cause of this; the "Read" permissions are off. Here is where my problem comes in, when I enable it and select "Apply Changes Recursively", it goes back to the unchecked "Read" permission. It doesn't seem to take into account the fact that I want to enable it.
Limit Permissions On 3 Networked Computers?
Mar 18, 2011I work at a small private school for languages and we have 3 public computers for the students to use for general stuff, internet research, facebook etc etc. Now every week i go to the comps and make sure their running well etc etc but every time there is new stupid things being installed by the students. Anyway, i wanna put a stop to this activity. the computers are not a toy for this lot but a tool and if they need a program for something to come and ask. As it stands the comps are all win 7, and are connected to the network via WIFI. the network is a simple zyxel router. There is another office comp connected to the router running Win XP pro and i also have a spare comp in the office which is unused.
View 3 Replies View RelatedSetting Permissions For Shared Folders?
Feb 4, 2011I have a two computers under the same workgroup.
ComputerA - Windows XP SP3
ComputerB - Windows Vista
I shared a folder on computerA and I am able to access it from computerB. The problem is I want to set permissions for the users of computerB on this folder. Under 'Sharing and Security' -> Permissions, I am unable to change the location. It always shows only computerA. How can I change the location to computerB so that I can set different permissions for users of computerB.
Access Permissions To Networked Computer?
Jan 31, 2011I have networked two computer with printers attached to each. PC1 is with a brother printer attached PC2 with a HP 1100 attached.In the past I had no difficulty with networking the computers and have access from each computer to each of the printers.
I up graded the computer Susan and I am now having a few problems that I never had before.After I perform the Network Setup Wizard on each of the computers (in many different methods) I am having the following problems.First, every now and then I am getting the following message after double clicking on Entire Network then Microsoft Windows Network:
Entire Network Not enough storage is available to process this command.If I wait a few moments I will get the MSHOME and am allowed to click on that. After this I do see both guy and Susan. If I double click on guy I see items pop up. If I click on Susan I get the following message:
Susan is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path is not found.Of course I can not add the printer from Susan either. Though I have had no problem adding the printer from guy to Susan. And it prints properly.
How To Set Up Only Read Network Hard Drive Permissions
Jul 13, 2011I have a network hard drive (NAS) in my LAN. I would like that a few computers in the LAN were able to only read but not write and the other computers could both write and read. Is there any way I could do this?
View 2 Replies View RelatedNetwork Share Permissions And Security Groups?
Apr 17, 2013I have a department network share that has several sub folders within that share. The director of this department doesn't want her employees to have access to everything in said share. We have a blanket security group for the dept that grants read/write access to the share. I tried creating a limited view security group and added it to the permissions on the share (right click the share, security permissions etc) but I am still able to go into folders that I shouldn't have access to.
View 3 Replies View RelatedSetting Up Windows 7 File Sharing Permissions?
Jan 8, 2012Im in the process of trying to setup a home network. Computer A and Computer B are in the same workgroup. Username/password are the same.
Computer A = Windows XP sp3
Computer B = Windows 7 sp1
The two computers can communicate on the network. Can ping back and fourth with ip and computername. Computer B can access from what I can tell the whole C:/ drive from computer A. Doesnt ask for a password or anything like that. Just works the way it should.
However, I cant figure out how to share the C: drive from Computer B with Computer A.
Computer B
Click on C: >> Properties >> Sharing
And this is what i see on the sharing tab
It looks like its shared cause i see the \inteli5c. But when i go onto the other computer I cant access it. This picture doesnt seem to want to work. But that link is the screen that comes up when i try to access the C: from the opposite computer.
Can No Longer Add User Permissions To A Network C Drive
Jan 19, 2012I can no longer add user permissions to a network C: drive - I get an access denied message. What could have happened?
View 6 Replies View RelatedServer 2003 Forgetting Permissions - Access Denied
Feb 14, 2011Even though I am an Administrator on the server, sometimes I create files or folder on a network drive and when trying to access them later (or immediately in some cases), I am getting an "Access Denied" box.For example, I just created a folder, moved an item into it, then tried to rename the folder and was denied access.
View 3 Replies View RelatedFolder Sharing On Mapped Drive - NTFS Permissions?
Nov 26, 2011I have a desktop and a laptop. I'm trying to share my external HD from my desktop, to my laptop.What I did was gave the local administrators group full share permissions to the drive, and of course the local administrators group also has full NTFS permission.That being said, I went to my laptop and did a Code:net use X: \mydesktopexternal /user:mydesktopuser PasswordExternal is the share name for the external HD on my desktop. The command worked successfully, however, I am still getting Access Denied when trying to get inside of this mapped drive.How and why does the command map the drive properly, using those credentials, but there's no access when trying to navigate to it? It works if I give Everyone full share permission, but I don't want anyone to just connect to it. Use password protection file sharing is enabled, but of course with "Everyone" given permission, that won't apply (at least to my knowledge).
View 7 Replies View RelatedSharing :: How To Grant Permissions For Domain User To Directory
Jun 29, 2012I started getting into IT (as a job) a little less than a year ago, though I've been working with computers for close to 20. So networking was never something I was into while working on computers at home. I've been handed a significant position at work and I am learning a lot as I go. I want to know how to grant permissions for a domain user to a directory without adding the user to all of the sub-directories and directories. The only way I've figure thus far is to grant permissions to said folder, then inside remove the "inherit permissions..." but then I have to manually remove the permissions to every other sub-folder.I want to add a single path to a folder by adding single permissions to each folder until the directory in question is reached.
View 2 Replies View RelatedCannot See Computers In Work Group - Error Message About Permissions
Jan 19, 2011I have two desktops connected to the internet through wired connections to a router. I also have one laptop that is wireless connected to the internet via the same router. (Also have another laptop running Vista, but not using it right now.) and all are part of the same work group with unique computer names.Desktop 1 can see that there is a work group, but cannot see the computers in the work group. Error message about permissions.
View 1 Replies View RelatedSharing :: How To Share Specific Folder Via LAN And Enable Permissions
Jun 3, 2012How to share a specific folder via LAN and enable permissions.More specifically, I'd like to share this laptop (Win 7 OS) with my Android PMP and Linux laptop (Mint OS) and grant it "full control" (read and write permissions) without granting "Everyone" control and without adding separate users with pw onto this laptop.(scroll to end of the post to skip details)Let's say the folder that I want to share is called "Bouncy." I right-clicked on "Bouncy", clicked on "Preferences", then enabled " Share.."to "Network Path: \MYCPUNAMEBouncy" and allowed Guest and Homegroup read/write privileges. From my Linux, I "Connected to Server" but couldn't connect.Under "Advanced Sharing" in Windows 7, I clicked "Share this folder" and created a profile under "Share name" => "Share name: Bouncy".I can connect from the Linux, but can't write to the Win 7 folder.
In "Advanced Sharing", under "Permissions for Bouncy", the "Group: Everyone" only has Read permissions. I clicked on "Add" and "Selected the object type: Users, Groups, or Built-in security principles" "From this location: MYCPUNAME". Under "Enter the object names to select" I wasn't quite sure what to write, so I clicked on "Advanced". The search results from "Find names" with these settings yield a ton of names that I'll omit. I first clicked on "MYNAME" in "My Folder": "MYCPUNAME". No access from Linux.I then changed the permissions to "Network", allowed full control permissions and now was able add files from my Linux. Which is good.How do I make it so that only a few specific IP addresses or Users (PMP and Linux laptop) have full control? How do I make it so that a password is required to access from LAN with full control?
Linksys Wireless Router :: E4200 USB Drive Permissions Read-Only Files
Aug 21, 2011If Anonymous Disk Access is selected, read-only files cannot be deleted; nor can the file attributes be changed. This is true even if one attempts to connect as an administrator. Unchecking Anonymous Disk Access and logging on as an administrator fixed this problem for me, but I'd think there are 2 issues.
1. Anonymous Disk Access should allow deletion of ANY files. I would expect this to be a "wide open" setting.
2. If Anonymous Disk Access is selected, a valid login should take precedence.
D-Link DIR-655 :: Can't Get To Web GUI Admin Page
Oct 30, 2011I followed this simple procedure to turn my DIR-655 into an access point: url...and it all worked except when I go to url... (which is where I left the router's IP address set) I don't get the DIR-655's admin login GUI, just a timeout. Since my main Linksys router is on 192.168.1.1, and my cable modem is at 192.168.100.1, and the DHCP addresses handed out by the Linksys router is from 192.168.1.100 to 192.168.1.149, getting to 192.168.0.1 should not be a problem. Functionally, the DIR-655 makes a great access point, wired and wireless are working very well, and I don't see any reason why I can't get to the web GUI admin page.I should be able to get to the DIR-655 router via the WAN port, as suggested in the procedure above, but I'd really really like to be able to get to it without having to connect a cable to the DIR-655 WAN port.
View 5 Replies View RelatedD-Link DIR-615 :: Can't Log Into Admin To Make Changes
Dec 12, 2012I have a DLink N300 (DIR 615), firmware 9.02NA.I've been trying to log into the "admin" but was only able to once. When I did get it everything was greyed out so I couldn't make any changes.
View 1 Replies View RelatedD-Link DIR-601 :: Can't Login As Admin
Jan 6, 2013i'm having some trouble logging in as admin. I leave the password section blank as directed but it comes up as "incorrect password". I then tried the same using the "User" and it worked just fine but i cant change any of my settings.
View 6 Replies View RelatedD-Link DIR-655 :: Not Logged In As An Admin
Jan 28, 2012I just bought the Dir-655 with 2.00 firmware. I am having trouble with my NAT on my game system and I have tried everything but I have everything setup on my router where it needs to be. I read somewhere, where a guy was having my same trouble and he upgraded his firmware to 2.03na. I have tried with no success whatsoever.
Downloading the file from the d-link website with no problems. But i keep getting the same message when i try to upgrade the router saying the file may be corrupt, the router is to busy, or I am not logged in as an Admin. I am the only one using the internet and I am logged into my router as the admin. it wont even start uploading the firmware to my router..
Can't Get To Admin Screen To Configure New Router
Nov 3, 2012Here is my Desktop Specs:
Windows XP Svc Pack 3
Mainboard :Asus P5KPL-CM
Network Card :Atheros AR8121/AR8113 PCI-E Ethernet Controller
Current Router - LinkSys BEFSR41 (Hardwired, CATV cable)
Static IP - 192.168.1.100, 255.255.255.0, Gateway 192.168.1.1
Problem: I purchased a new GB router, Dlink DIR825, wireless and 4 ports, and cannot connect to it to set it up. I need to get into it to change its IP address from 192.168.0.1 to 192.168.1.1 and to make a few other changes. I have 6 different ethernet cables, all of which work with my desktop as well as my laptop. I can get into the new Dlink router just fine with my laptop so it is not a bad port on the new Dlink. The cables work with my existing router and my new router using my laptop so it isn't a cable problem.My internet connection is Hughesnet (DISH) which uses the 192.168.0.1 address, the same as the new router. So here is what I have tried:
1. Powered down Hughes router, new router, and old router.
2. Removed cable from Hughes router to old Linksys.
3. Changed static IP on desktop from 192.168.1.100 to 192.168.0.50 and Gateway to 192.168.0.1.
4. Rebooted
5. Connected ethernet cable from desktop to Port 1 on new router.
6. Powered up new router.
7. Brought up Browser and entered the 192.168.0.1. Nothing happens. The Port light on the new switch shows the connection properly and the other lights are on properly, except for the Internet light which I haven't hooked up yet.
The above does not work so I powered down everything and then:
1. Connected the cable from the Hughes internet modem to the Internet port on the new modem.
2. Powered up Hughes modem and waited for all lights to come on.
3. Then powered up new router and waited for all lights to come on. This time the Internet light came on like it should.
4. Powered up my desktop.
5. Brought up Browser and entered the 192.168.0.1. Nothing happens. I expected this since there would be a conflict with the 2 modems having same IP.
Next I tried to basically set my desktop to use DHCP and removed the cable from the Hughes modem to the new router. Powered down everything then brought them up one at a time, Hughes modem, router, and PC. Still not able to connect to the new router.I also used my laptop to set the new router to 192.168.1.1 and reset my static IP to the original 192.168.1.100, 255.255.255.0, Gateway 192.168.1.1. Still nothing and I couldn't even ping the router.
Does Admin Know Name And Extension Of Downloaded File?
Nov 11, 2012Let's suppose I'm connected to a network whose admin asked in a friendly way not to download anything but certain things he specified.He never came to my machine or setup any kind of client to it. The question now is, is there any chance he knows what I download???Does he know the name and the extension of the file I download if I use Utorrent and magnet links?
View 2 Replies View RelatedWRT120N Can't Connect To Admin Console
May 30, 2012I was trying to get into my router to give it a reboot yesterday, but was unable to get into the console. I used the username/password I've used for over a year (it was also auto saved) but it would not let me in. I went through all the steps to do a hard reset/restore default settings and it wouldn't let me. I had to access the boot loader to reload firmware, and that worked out just fine.
Now, I still cannot get access to the administration console with the default username (blank) and password (admin). I've tried moving my PC to ports 1-4 and none work.
I was about to give up on the router but I tried connecting from my iPhone and everything works just fine. I was even able to change my SSID and WPA key again.
Would this be a hardware issue, or could there be something in Windows 7 that's affecting it? I have disabled the windows firewall and AVG and still can't get any access from either Firefox or IE.
A couple of times I was able to get onto the first page of the console through IE, but if i tried clicking anything else it would ask for the username/password again and not connect. Now it won't even let me in once.
Can't Access Admin Page Through Router?
Jul 3, 2012Moved into a new place, set up a connection. Server provider gives only one mac address, they set it on my router. They say that it should be working, make a restart and that's it. I did that but still no connection. Moreover, I cannot connect through the router at all and therefore cannot access router admin page to configure it either. Now what to do? Password for the router is correct. Even when I take down all the security, still I cannot connect.To be more specific, at first I could enter the router admin page, but since I didn't know how to configure it properly, I made some mistake. I think I choose setting "configure wireless network" and changed something there. After that I cannot access the admin page or connect through the router.
View 1 Replies View RelatedLost My Router Wordpass Admin
Jul 20, 2012I have lost my router wordpass admin.
View 1 Replies View RelatedFind The Security Key For Admin-pc Network?
Oct 27, 2011How can i find my security key for setups
View 1 Replies View RelatedCannot Log Onto Network With / Without Admin Password - Windows 7
Aug 9, 2011I have a small, wired office network. Win 7 platform - I upgraded a pc from Vista to Win7 Ult. Now in order for 2 of the office personnel to logon to the network,they must first supply an admin password each time. I am the administrator so I can do this for them, but I can't keep doing this every time they need to login.
View 3 Replies View RelatedAccessing The Router's Admin Page?
Jan 29, 2012I have a binatone wi-fi modem. Internet is working good from router but i am not able to connect to router admin page i.e 192.168.1.1 and not be able to change wi-fi password.
View 3 Replies View RelatedD-Link DIR-655 :: Can't Connect To Admin Page
Feb 19, 2013I'm plug with my laptop on the DLINK, no internet connexion available, and it's impossible to connect to 192.168.0.1 ..What am i suppose to do, i need to configure a static ip and specifics dns to get to the internet, and it seems that without internet i can't acces to 192.168.0.1 ...
View 1 Replies View RelatedD-Link DIR-601 :: Unable To Get WAN Admin Access?
Apr 13, 2012Router is a DIR-601 hardware B with firmware 2.00NA Using the router connected to a cable modem, I was unable to gain admin access via WAN.To troubleshoot the problem, I connected the router to the LAN side of my main router (DHCP server, DNS, etc.) The primary router correctly assigns a WAN IP to the 601. The 601 operates normally to access the Internet either via its WiFi or via Ethernet. The 601 is configured for a different IP address range on its LAN side so there is no IP address conflict possible with my main router.On Tools->Administration, Enable Remote Management is checked, Remote Admin port is 1080 (I've tried others), and Remote Admin Inbound Filter is set to Allow.In this case the WAN IP address of the router is 192.168.0.98. When I go to http://192.168.0.98:1080/ with a web browser from the WAN side, I get no response. From the same computer I can ping the router with "ping 192.168.0.98".I figure I have to be missing something here. It appears that this feature just is not there, but others must have this working. It seems like I've tried every possible combination of filters, port numbers, etc., but it just doesn't respond from the WAN side. (192.168.1.1 on port 80 works just fine from the LAN side.)
View 3 Replies View RelatedD-Link DIR-825 :: Can't Seem To Login Into The Admin Console
Mar 12, 2013I wanted to update the F/w on my rev b dir 825, but unable to load the login console for admin, I haven't changed anything and the router was still on 2.07NA f/w
View 1 Replies View RelatedD-Link DIR 655 :: Blocking Website Of Admin
Apr 5, 2011I have a dir-655 a3 router that is blocking my website ip address.I could previously access this site until one day, without changing any router settings, it started blocking communication to my website. pings, tracerts, web browsers, everything simply times out. It resolves the IP address ok but doesn't go any further than that. I was on firmware 1.31 and have now upgraded to 1.35NA, but no luck. I have also tried resetting factory defaults to no avail. If i bypass the router and plug my computer straight into the modem, the site loads fine. so its definitely the router. I have tried this on a number of devices to make sure. It appears that for some reason the router is blocking that specific IP address as it is on a shared hosting and I can't access any other sites on the same IP address. Does the router check the IP address with any web service before returning the request?
View 4 Replies View Related