Lost My Router Wordpass Admin
Jul 20, 2012I have lost my router wordpass admin.
View 1 Replies
ADVERTISEMENT
Linksys Wired Router :: BEFSR41 Lost Access To The Admin Page
Nov 13, 2007I have a BEFSR41 V2 working as dial in ADSL connection.While I changed my settings of the UPnP in the router I lost access to the admin page. Well most strange is that everything is working.I kept my internet access as well as the computer and printer access.The only thing I lost is access to the router admin page.The password it was not defaulted to admin, neither kept the password that I had set up.
View 9 Replies View RelatedLinksys Wireless Router :: WRT54G - Lost Username And Password For Admin Page
Apr 30, 2007I seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?
View 9 Replies View RelatedBelkin Routers :: Lost Admin Security Password Of N300 Share Modem / Router?
Feb 28, 2013i lost the admin security password of my N300 Share modem-router. How can i return to the factory settings ?
View 1 Replies View RelatedUnable To Access Router Admin Page Haier R800 Router
Dec 13, 2012Unable to access router admin page for Haier model R800
View 1 Replies View RelatedLinksys Wireless Router :: E1200 - How To Access Router Admin Page
Apr 1, 2012I want access the my E1200 website in order to implement new username and password to secure the network.
View 1 Replies View RelatedCan't Get To Admin Screen To Configure New Router
Nov 3, 2012Here is my Desktop Specs:
Windows XP Svc Pack 3
Mainboard :Asus P5KPL-CM
Network Card :Atheros AR8121/AR8113 PCI-E Ethernet Controller
Current Router - LinkSys BEFSR41 (Hardwired, CATV cable)
Static IP - 192.168.1.100, 255.255.255.0, Gateway 192.168.1.1
Problem: I purchased a new GB router, Dlink DIR825, wireless and 4 ports, and cannot connect to it to set it up. I need to get into it to change its IP address from 192.168.0.1 to 192.168.1.1 and to make a few other changes. I have 6 different ethernet cables, all of which work with my desktop as well as my laptop. I can get into the new Dlink router just fine with my laptop so it is not a bad port on the new Dlink. The cables work with my existing router and my new router using my laptop so it isn't a cable problem.My internet connection is Hughesnet (DISH) which uses the 192.168.0.1 address, the same as the new router. So here is what I have tried:
1. Powered down Hughes router, new router, and old router.
2. Removed cable from Hughes router to old Linksys.
3. Changed static IP on desktop from 192.168.1.100 to 192.168.0.50 and Gateway to 192.168.0.1.
4. Rebooted
5. Connected ethernet cable from desktop to Port 1 on new router.
6. Powered up new router.
7. Brought up Browser and entered the 192.168.0.1. Nothing happens. The Port light on the new switch shows the connection properly and the other lights are on properly, except for the Internet light which I haven't hooked up yet.
The above does not work so I powered down everything and then:
1. Connected the cable from the Hughes internet modem to the Internet port on the new modem.
2. Powered up Hughes modem and waited for all lights to come on.
3. Then powered up new router and waited for all lights to come on. This time the Internet light came on like it should.
4. Powered up my desktop.
5. Brought up Browser and entered the 192.168.0.1. Nothing happens. I expected this since there would be a conflict with the 2 modems having same IP.
Next I tried to basically set my desktop to use DHCP and removed the cable from the Hughes modem to the new router. Powered down everything then brought them up one at a time, Hughes modem, router, and PC. Still not able to connect to the new router.I also used my laptop to set the new router to 192.168.1.1 and reset my static IP to the original 192.168.1.100, 255.255.255.0, Gateway 192.168.1.1. Still nothing and I couldn't even ping the router.
Can't Access Admin Page Through Router?
Jul 3, 2012Moved into a new place, set up a connection. Server provider gives only one mac address, they set it on my router. They say that it should be working, make a restart and that's it. I did that but still no connection. Moreover, I cannot connect through the router at all and therefore cannot access router admin page to configure it either. Now what to do? Password for the router is correct. Even when I take down all the security, still I cannot connect.To be more specific, at first I could enter the router admin page, but since I didn't know how to configure it properly, I made some mistake. I think I choose setting "configure wireless network" and changed something there. After that I cannot access the admin page or connect through the router.
View 1 Replies View RelatedAccessing The Router's Admin Page?
Jan 29, 2012I have a binatone wi-fi modem. Internet is working good from router but i am not able to connect to router admin page i.e 192.168.1.1 and not be able to change wi-fi password.
View 3 Replies View RelatedCisco :: Radius For Both VPN And Admin Access On Same Router
Jul 25, 2012I am attempting to configure Radius for use with a Cisco router for the first time. I have read a few tutorials online for setting up administrative access to the router using active directory accounts. On the surface this doesnt seem to over complicated. My question is: Is it possible to have one Cisco IOS router set up with radius authentication for administrative access AND have the same router set up for VPN clients who will be authenticated via the same Radius server? The router I am using is a Cisco ISR 2911 and the IOS version is "Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M2".
View 1 Replies View RelatedAxesstel MV240 Usb Modem - Cannot Get To Router Admin?
May 7, 2012I have a cradelpoint mbr800 wireless router and an axesstel mv240 usb modem. The modem works fine when plugged straight into my computer, but if I plug it straight in to my router the lights light up like it is aquiring and then go dark. And this cycle just keeps repeating. Now when I plug the usb modem in to my computer I have to push to connect on the start up manager before I can get on the internet. Is this why It will not work plugged straigh in to the router? and if so is there anything I can do to get it to connect through the router? I also can not get to the router admin to look at or change the settings.
View 5 Replies View RelatedWireless Home Router With Admin Controls?
Feb 4, 2012We have a fast broadband service and three teenagers, two of which have laptopsWe are allowed 100Gb/month; if we exceed that, the we are charged $1.5/Mb. The provider has a web interface where we can check the last 24hours' usage. When ever we go over the daily budget, I ask the darling children who was watching all the videos-- to which they all say "not me".I want a wireless router with some admin features that allow me to see real-time who is the bandwith pig and shut them doI am not aware of any routers in the $100-$150 range that have these kind of features. There are industrial grade Cisco routers, but these have more features than I need and are really expensive
View 2 Replies View RelatedUnable To Connect To Router Admin Panel At 192.168.1.1
Oct 18, 2012I just got back from being gone for a couple weeks and my router stopped working. I tried to reset the router and connect to the admin screen at 192.168.1.1, but it gives a "page not found" error. My internet work with a wired connection to the router, and the computer's IP address is 66.xxx.xxx.xxx. Looking at most forums which talk about this problem it seems like most people have IP addresses starting with 192. Why does mine start with 66? Is this related to the problem of being unable to access the admin screen? This is a home network and I'm running Ubuntu and have a Linksys WRT54G router. I get the same IP address whether I connect just from the modem to the PC, or from modem to router to PC.
View 3 Replies View RelatedD-Link DIR-601 :: So Slow In Router Admin Pages
Jun 26, 2011I needed to immediately set a schedule and block IPs, these pages are built into the router.It took forever for the pages to load it took 30 minutes to navigae 5 pages. Every time I try it.Router is good and signal is excellent but the admin router pages to configure are frustratingly slow.As a techie it is anoying, as a customer getting support by the hour spend more on a faster better quillity router were the work can be done in 1/20th of the time it takes on this router.I'd say I have a dud but once setup the router is a great performer if you do not need to admin the router further?
View 3 Replies View RelatedD-Link DIR-601 - Access Modem Router As Admin?
Feb 26, 2013I was trying to access the modem router as the admin but AT&T seems to have a pain in the butt security system from me making any changes. I wanted to forward some ports to setup my Synology DS212j Network Attached Storage (NAS). I connected my d-link router to the already setup modem router which I am now connected to. I have to run off to school but I was wondering, would I be able to forward the port off my d-link DIR-601 and be able to host my NAS server off that?
I don't have too much in-depth networking experience besides setting forwarding ports, setting static IPs, but I can't do that since I am not the admin for the AT&T router. I figure the password for the AT&T router is just defaulted to admin or blank but I haven't had time to fully test everything out.
Unable To Access Admin Page Of Baitone Router?
May 22, 2012I was doing some changes in baitone router due to mistake i have disabled something in it.Now i am not able to access its admin page....Before it i was accessing through 192.168.1.1
View 3 Replies View RelatedCan't Get Access To Router / Won't Accept Admin Password Or 1234
Apr 8, 2012I can't get access to my router. Won't accept admin password or 1234 .
View 3 Replies View RelatedLinksys Wireless Router :: WRT160N Cannot Open As An Admin
May 7, 2012I need to get to my web admin page, but I cannot get into my router to do so.IE tells mt that there is a certifacte error, and then gives me the option of going in anyway.When I select that option, nothing happens, and the same IE warning page remains.I am plugged directly into an e-net port on the router, and it is a WRT160N.
View 1 Replies View RelatedRouters / Switches :: Cannot Connect To Router's Default Admin Page?
Dec 25, 2012Motorola wr850gp wireless router. The default ip is 192.168.10.1. I attempted to use it as a wireless access point and now it is not working at all. I tried connecting the router LAN port to the computer and 192.168.10.1 pulls up nothing.I tried connecting the modem to the WAN port and the LAN port of the router to the PC, but then I have no internet access at all. I tried resetting the router, still nothingAll lights on the router are green. I don't know what the heck is going on?
View 3 Replies View RelatedD-Link DSL-2680 - Can't Connect To Router's Admin Page (timeout)
Feb 28, 2011For about a month or two now, I've not been able to connect to my router's admin page @ 192.168.1.1 I am using a D-Link DSL-2680 router.
Whenever I go to connect to 192.168.1.1 in my Web Browser, it just sits there trying to connect and does nothing. But eventually after some minutes I get the error: 'This web page is not available The web page at http://192.168.1.1/ might be temporarily down or it may have moved permanently to a new web address. Error 101 (net::ERR_CONNECTION_RESET): Unknown error.' Here is a screenshot:
I tried pressing the reset button on the back of my router, but it would just sit there with the green power LED and another green LED just flashing constantly (I assume this is the ethernet 1 cable LED) and this happens for more than 10 minutes.
All I want to do is just port forward my game servers again without the use of Hamachi or other programs
Linksys Wired Router :: BEFSR81 V3.1 Blank Admin Pages?
Jan 28, 2010BEFSR81 v3.1 Current firmware 2.51.4 build 600 (09-4-2009)The Web Admin pages become dysfunctional after the router has been up 3-4 days displaying only a blank white page. Viewing the page source shows that the HTML is incomplete.I am not sure of the exact firmware version where this problem originates, I noticed it after flashing to 2.51.4 build 400 but cannot remember which version was running before the update. Just flashed to 2.51.4 build 600 last week hoping the new version had corrected the problem. Still broken.The router remains completely functional but the Web interface does not work correctly after 3-4 days.I have tried re-flashing the firmware and have gone as far as resetting the router both before and after the flash, even tried 30/30/30 resets but the problem with the Web interface remains.Re-booting the router every 3 days is not the best “solution” as my network is running DHCP. I would rather not fall back to older firmware as ver 2.51.4 build 400 corrected the DHCP errors on my Windows machines and decreased the initial connection time when machines boot up. I have read in this and other forums where others are having the same problem with this router/firmware but have been unable to find a working solution which leads me to believe the actual problem resides in the later firmware builds.
View 9 Replies View RelatedLinksys Wireless Router :: Can't Change Admin Password On WRV210
Jul 8, 2011I just got a WRV 210 wireless router (three of them actually, planning to set up a VPN). But I can't set the admin password. I've tried 4 times, and every time, i've got to hold the reset button to reset to factory settings in order to access the management pages! I enter the new password in both fields, and then click to save the settings. It restarts. Then i try to log in - and it doesn't accept the new password. It doesn't accept the default password. I've tried with admin/(new password) and (new password)/(new password), and admin/admin. None of them work, forcing me to reset router to factory settings. I've tried a password composed of 6 letters followed by a . Thinking that maybe the . was throwing it off, I tried 6 letters followed by 3 numbers. That doesn't work either. I've updated to firmware version 2.0.1.5. No luck.
View 1 Replies View RelatedLinksys Wireless Router :: Cannot Connect To Admin Page At All On E3200
Feb 23, 2012I don't have to completely reset my router as I have a ton of configs on it. Anyway, recently for some reason, I lost all access to my admin page. Cisco Connect also cannot find the router. Funny thing is that all of my wireless profiles work just fine. Meaning all of the computers in my home connect to the internet just fine using the router. Both the guest access and WPA connected machines.[url]...
View 1 Replies View RelatedLinksys Wireless Router :: E3200 Admin Page Times Out
Dec 18, 2011I recently tried to edit settings on my E3200 and was unable to get to the page. I typed in 192.168.1.1 in the address bar, made sure no proxies were enabled and tried on wired and wireless computers and all the times it said "page could not be displayed" i haven't not reset with the button on the back. I also did an map scan of the router and this is what came up
Interesting ports on 192.168.1.1:
Not shown: 65531 closed ports
PORT STATE SERVICE
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
1780/tcp open unknown
Linksys Wireless Router :: Admin Panel - Logs And VPN Formation?
Aug 11, 2012As I've seen in my Linksys' admin panel, I have a log option (Administration/Log). So if I enabled it i can check which sites was browsed in my home network?And the second question: if Linksys can store the browsed sites history and if I will use a VPN connection on my PC or iPhone (not router!) the logs will be still look like before setting-up VPN on PC? So like: [URL] not like: [URL]?
View 3 Replies View RelatedLinksys Wireless Router :: WRT160NL - Slow Admin Interface
Mar 6, 2013I took one and a half hours to get everything set up, I've got a PPoE connection, my problem is that ever since I entered the administration interface each and every page takes 2-5 minutes to load, it's absurdly slow, also, when trying to setup my WiFi, it timed out several times, I updated the router to the latest firmware, the same issue, it took me 4-5 retries to get WiFi set up properly. Sometimes navigating from page to page is quicker, 30-40seconds, but still those are some big times.
Is this normal behavior or do I have a hardware problem and I need to take it back and request a new one?
Mention: I am wired from a laptop, all the lights are blue, blinking nicely.
Linksys Wireless Router :: EA3500 Change Admin Username?
Apr 17, 2012how to change username admin to something different. I can reset the router password but there's no easily identifiable option for changing the username.
View 5 Replies View RelatedLinksys Wireless Router :: E1000 Determine Admin Password
Sep 29, 2011I have an E1000 linksys router. I am trying to determine the admin password. I have looked at seeral entries regarding this. I do not have CICSO connect installed. Not sure why. The router works fine. I have the CD that came with the router. I have also downloaded current version of connect software. Both of them want to config the router. The first item asked for is the admin password. I know I press reset button. I am trying to retrieve password without doing that.
View 1 Replies View RelatedLinksys Wireless Router :: EA3500 - Change SSID In Admin Area?
Jun 9, 2012I have logged into the admin area 192.168.... And I do not see where to change the SSID.
View 2 Replies View RelatedLinksys Wireless Router :: Finding DHCP List In Admin For WRT160N?
Jan 5, 2012I have the WRT160N router for 3.5 yrs and it's worked perfectly since installing it. About two weeks ago it began intermittently dropping cable connection. First few times I thought I could resolve it by unplugging/plugging router & modem so they can "re-syn" to the cable connection. That still works but now it occurs sometimes multiple times within a few minutes/hours and then won't happen again for an entire day/days. The other day I had connectivity but instead of the usual 5 bars I only had 3 while using my laptop in the same spot in the house as usual.
View 5 Replies View RelatedLinksys Wireless Router :: EA6500 Admin Page Hangs On Login?
Feb 3, 2013I have been through three chat sessions on this without resolution and support tells me just to factory reset. After some time (weeks) after a successful local login to the admin page subsequent attempt to login just hang. After entering the admin password the page changes and says "Waiting" under revolving circles. It will sit there for over 1 hour. I have tried IE, chrome and firefox on Windows 7 and Windows 8 on three different machines and it behaves the same. Of course I have to go through this same process with the support people every time and every time they come to the conclusion that I have to do a factory reset. But so far Linksys denies that there is a defect.
View 9 Replies View RelatedLinksys Wireless Router :: E3000 Cannot Access Admin Via Cisco Connect
Apr 25, 2012I tried all methods: Cisco Connect (on Vista), http and https, but none works. However, the router seems function correctly. My laptop can acquire DHCP address and browse via the router. But I just cannot connect to the router to perform Admin tasks.Problem: when I launch CiscoConnect: the GUI shows "Cannot access your router", even though I am using the router to browse the net wirelessly and wirely. Using browser to navigate to http://192.168.1.1 and https://192.168.1.1 also give me cannot access error!
View 1 Replies View RelatedLinksys Wireless Router :: E4200 Can’t Open Admin Page
Oct 24, 2011I have set up a second E4200 as an AP.Even though I’m getting a signal from it I can’t open the ADMIN page. Also, it’s NOT showing up on my main 4200 "DHCP client table'.I configured it as a static IP 192.168.1.145 during setup and still cannot get in. My ping to .145 comes back “timeout”!Since I’m getting a full signal from it, it must be working so why can’t I get in and why doesn't it show up?
View 7 Replies View Related
