im having a problem with a network drive on a gigabit network that is shared from a file server. Theres a few shares that all contain similar ammounts of data (about 80gbs worth) however one drive for some reason takes 5 seconds to open. It doesnt matter which computer on the network you try from either its still delayed. This has only in the last week started happening. Other drives set up open instantly.
View 9 Replies
I have a small Windows XP Workgroup network. We have a large folder on the server with over 10,000 image jpgs. Up until six months ago it opened fine, but now when I try to open this folder from any of the workstations it takes several minutes.I've tried unsuccessully many of the proposed fixes over the past few months included changing the RAID controller and this is my last resort.
View 1 Replies View RelatedI've got 3 computers. All running Windows 7 Home Premium. My desktop has an entire drive shared. I initially was having problems accessing the drive from both my HTPC and my laptop. I flushed the dns and reset winsock. reset IPv4 TCP/IP,and reset IPv6 TCP/IP.This fixed the problem from the laptop to the desktop, but the HTPC is still having problems accessing the desktop. The desktop however has no problems accessing the HTPC.Also have disabled auto tuning and the rdc.Forgot to add: Laptop is wireless the other two are wired.
View 4 Replies View RelatedTwo Access Switch(2960) are connected to each other and they are connected to Core Switch ( 6509), problem is the user's connected to Access switch cannot access Share drive which are on Servers , this servers are also connected to core on the first module ,,, so the user are not bale to open their share drive , it is opening but taking too much time?
View 4 Replies View Relatedwhat is the difference between network drive and map drive?
View 1 Replies View RelatedI was playing a MMO game called Wizard101, when randomly, I disconnected from it. I tried first to re-connect to the game, no success.So I tried going to its website, loads very slowly, sometimes not loading at all.Then I wanted to try go to its fansite, to ask for support there, but it turns out that the fansite isn't loading too.I try to load a few more pages that is related to the game, but none of them will load.However everything else seems to load just like normal.
I try to fix this with using my usuall fixes:
- I tried connecting to the websites on another computer. Didn't work.
- Restarted my internet + reset my router back to standard. Neither did this work.
I haven't changed any of my internet settings in a few months; so I doubt anything there would be the problem.
On my moms laptop, (month old Lenovo B570/i3-3230/4GB/W7), when transferring files to my Crucial Gizmo! 16GB USB Drive, it is pretty much impossible to surf the web. Loading websites take 30-60 seconds, it's ridiculous. Is this normal? Her router is Linksys WRT54G. Router is not connected via USB, in fact the Laptop is connected through ethernet cable (not currently using wireless).
View 5 Replies View Relatedhas full Download/Upload speed while I only have a max. of 5kb/s download speed. The ping is perfect (20ms) and the upload rate is around 150 kb/s. I tried it out with my laptop on Windows 7 and Ubuntu and also with my Android Smartphone. I don't know why it's not working.
View 7 Replies View RelatedI have a 2911 router with some cisco 2950 switch WAN is 4Mb fiber Why open a Web page is very slow. [code]
View 5 Replies View RelatedRegarding to subject above, I using Cisco 1921/K9 which I have bought from ECSM on 19-march 2012 currently facing a problem with the cisco. My problem is the I can’t browse most of the webpages and very slow browsing even I’m using Unifi 10mbps .
I couldn't open websites ex. msn.com / yahoo.com but if i bypass the cisco router there is no issue appear. I have checked the setup and there are no problem on the configuration or the Unifi line . I think it would be any hardware problem. I have attached the info of configuration the cisco .
I just installed a Cisco ASA 5505 in my company's network,however the network became so slow and many websites cannot be opened or it takes toolong to open (yahoo, hotmail etc.) resulting to a request time out sometimes.
Here is my configuration:
ASA Version 8.2(1) !hostname xxxxxxenable password xxxxxx encryptedpasswd xxxxx encryptednames!interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 !interface Vlan2 nameif outside security-level 0 ip address
[Code].....
I have a windows 7 desktop with an SSD and regular mechanical hard drive where I keep my data. I also have a laptop with a small SSD as well. I wanted to keep the laptop free of non-critical data so I decided to setup a file share between my desktop (Windows 7 home prem) and my laptop (Windows 7 pro). I was able share the files and navigate to my desktop through my laptop. I successfully mapped the folder as a network drive and all was well. Then I rebooted and I was disconnected from it, it remembered that it was there but I needed to manually connect to it and I needed to provide my login credentials. There is no password just a username.
What is causing this and is there a way to get around this? Also is there a way to set a timeout because if my desktop is not on and I want to use my laptop, the boot times are much longer compared to when I don't have the mapped network drive on my laptop at all.
I'm trying to see if I can fix my friend's NAS which apparently has some pretty important data on it that wasn't saved anywhere else. They actually had the Geeksquad look at it and they've come to the same conclusion I have so far, but I figured I would ask the internet before I gave the thing back to them and said Geeksquad was right.
Anyways, they have this 5 drive RAIDed NAS which apparently just stopped showing up on their network. I borrowed it from them to see if I could figure it out. It turns on just fine and my router assigns it an IP address, but the IP address just takes me to a blank LaCie dashboard screen. It's weird because it's clearly running it's web server because it's just a gray background with an empty white box and "(c) LaCie 2010" at the bottom. No content at all.
Additionally, I tried installing the LaCie Network Assistant on my home computer and it says it cannot find any network disks. I've tried the "wake up a device" where I enter the mac address, but that doesn't do anything.
All the lights are solid blue on the front and over all the drives so it doesn't appear a drive has failed or something. Even so, that wouldn't really explain the blank dashboard right?
My WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
View 3 Replies View RelatedI am connecting the router to a corporate network that assigns "real" IP to it (DHCP). Then I have 3 computers connecting to this router (local IP 192.168.1.2-4).Assuming I want to access a network drive named "ADrive" (on the same corporate LAN) from any of those 3 PCs, how do I do it? ("\ADrive" does not work, neither does replacing the network drive name with its IP, cannot ping either - it's like I'm on a totally separate network).
View 3 Replies View RelatedI'm currently in college, and do most things with my laptop, and I have wifi just about everywhere. It has a generous 500 GB of storage, but I'd like to store non-essential files on, an external hard drive. However, lugging around 3 TB of storage isn't exactly feasible, and with my experience with my current 1.5 TB portable drive, me running around everywhere with it bouncing in my bag is just going to abuse it until it stops functioning (which it has...)[URL]
View 3 Replies View RelatedWe have a user that works from home and connects to our network through a VPN when she needs to access files on our server (mapped as a shared drive.)I created a new shared folder on that same server and she can't map a drive to it. It just continuously prompts for username/password.She is running Win 7 Pro, server is Server 2008. The server is on a domain, she is not. She already has a mapped drive to a different folder on the same server as well as to a folder on another server. We are trying to map using the IP address (\IPFolder) and have tried putting the username as IPUsername and just Username with no luck. Tried mapping with net use. Found some stuff online about changing some registry values - tried that. Change the network type from "Home" to "Work" and still no luck.
View 14 Replies View RelatedWe have a network drive and it's ip is 192.168.1.3. We have created different users with different permissions for each folders. I have a problem in mapping the network drive in each computer. I can map each folder in them though.I access the drive using run command \192.168.1.3 and it displays all folders. I map the folder but don't know how to map the drive itself.
View 2 Replies View RelatedA program is installed on our server, and I run it on my pc by mapping a network drive to the server's hard drive.I'm sure you all know this procedure.Anyway, I can access the shared drive on the server from my pc, browse, create and delete files on the server, all fine.But, when I try to map the drive, it says:"Windows cannot find 'WEaXA.EXe'. Make sure you typed the name correctly, and then try again."And its only on my pc this happens, on all the other pcs its working fine. And from my pc I can map any other shared folder/drive.
View 1 Replies View RelatedOne of my Laptop, I cannot see the Network Share Drive from My Network Place. I am using DNS320 Dlink. But I can ping and I can access web base go inside Network Share drive management. But when I try to ma \sharedrivenamefolder, "Error code 0x80070035 Network path was not found ". I already restart the network drive, router and this computer also cannot. Last time we using vbscript to set at startup and let it map automatically when window boot up every day. Other PC with XP all can access. I cannot upgrade vista to 7 because it's from remote site. But now why cannot I don't know what happen with Fuzzy Vista home.
View 3 Replies View RelatedI have a Windows XP SP3 PC and want to map a drive on it thorugh my wireless network
The wireless network has a router (SpeedPort W 701V) that connects to internet, this wireless network is password secured (WPA personal) and open to any device that knows the password.
I've seen some supposed 'tutorials' on this but they differ quite a bit: do any of you know for sure how to map a microsoft skydrive folder as a network drive so that clients can use it as a 'normal' way of sharing files?the same question could be posed for Google Docs - I guess these are competitors/equivalent in aim.
View 6 Replies View RelatedIn my office I have set up a NAS server which is connected to a Netgear VPN router. When I try to connect remotely I can open the VPN tunnel but when I try to access the network drive, it says the network path cannot be found.
View 3 Replies View RelatedIs it possible to Map a Network Drive over a VPN?Users in my company connect to a remote site using VPN (PPTP) and i am wondering, can i map a drive to the PC i am on from the remote network while connected to VPN?
View 10 Replies View RelatedI have a 1TB internal SATA HD that I want to turn into a network drive. Since the MB in the desktop I had this drive in fried, I'm looking for options to network this drive (that stores photos, music, utilities, etc). So far after brief research, looks like my most reliable option would be an external enclosure with USB and a router with a USB share port.
-what other options do I have?
-what would be a good wireless N/G router with a USB share port, great range or range extender option and can handle multiple devices online (xbox, ps3, wii, droid phones, 2x or more laptops, wifi Tv all not connected at once, but a few can be, so I need a router to handle the demand)
-a good reliable external enclosure
I need a router that has a good strong signal. The current G router I have (d-link di-524(?)) works ok, but the signal cuts out in the kitchen and virtually non-existent in my garage (to use Pandora on phone).
I'm trying to share my drive thats on my desktop PC to my Netbook. But I want it to show up on my netbook like a local disk drive. Is this possible? Would I need a software for this and if so which one?
View 1 Replies View Relatedi bought Tata photon plus data card around 5 months back. But now i moved from tata photon plus to reliance net connect coz of its poor service . My friends tell me that i can use my old data card as pen drive. what i should do to use my data card as pen drive.
View 3 Replies View Relatedmapped network drive getting disconnected always.is there any batch file available to check the status every minute whether the drive is connected or not??
View 1 Replies View RelatedMy school have a couple of public network drives like one containing all the network printers the school own. But when i am trying to access this drive through my lenovo laptop by typing a command in run \addressname. I receive an error from windows telling me: "You cannot access \addressname | Check the spelling of the name. Otherwise, there might be a problem with a problem with your network. To try to identify and resolve network problem, click Diagnose" after a couple of minutes.
View 1 Replies View RelatedI want to back up my samsung 310 to a network drive and seem unable to do so using Samsung backup and with windows 7 home you cannot back up to a network drive. It is a home network.
View 1 Replies View RelatedI recently mapped my media player's internal hd to my Win 7 system. I'd like to change the drive letter I assigned to something else but I can't find how to do it.
View 2 Replies View RelatedTwo people went on a business trip with their laptop and when they came back they could no longer access the data server. Cannot map the network drive either.
1. Every desktop PC in office can see and access the data server fine.
2. We have a DHCP and DNS server (on one PC; Windows Server 2008), but we had to shut down the services because internet and email didn't work when the DHCP and DNS server service was on. I am confident that this is due to the recent shutdown of the company e-mail server (now outsourced) and the server settings needs to be reconfigured. The described symptom persists even when the DNS server service is stopped.
3. Upon taking a closer look at the DHCP reservation settings. The reservation status indicates as "Reservation (inactive)". I don't know the MAC address of the device, so I have no idea if the values are correct. Tried rebooting the server, delete and recreate the reservation, reboot router; no cigar.
4. Using the coworker's laptop, the data server is shown in the "Other devices" section even with the DHCP sever disabled, but shows error that it cannot access it.
5. All users, with the exception of the data server, have dynamic IPs assigned.
6. DHCP, DNS server is set to 10.10.10.2, Router is set to 10.10.1, Data server is set to 10.10.10.175. 10.10.10.2 is also an accounting server which can be accessed by everyone even in the midst of this mess.
If you have a router connected to several computers can a person create a shared drive using a remote USB drive?
View 7 Replies View Related
