RV042 Networked Printer Behind Second Router
Jun 13, 2013
I have a setup with a Cisco RV042 router connected as follows: Broadband Motorola Surfboard -> Cisco RV042 -> Wireless Router [code] The Surfboard has a wireless N network, though the other wireless router runs on G for compatibility reasons.
The problem I am having is that I have a printer connected to a Windows computer on the wireless N router (with a static IP address), and I need computers on the G network to be able to use the shared printer. The printer is shared, though not through Home group.
On the other computers in the house (on the G network), I cannot see the server in the list of computers on the network, and I cannot seem to manually add the printer by typing in the IP address.
how can I get other computers to detect the server connected to the printer, or what IP address/port/URL do I specify to connect to a shared printer on that PC?
View 2 Replies
ADVERTISEMENT
Aug 16, 2011
I have a Dell desktop and a dell laptop. I got a new belkin n300 F9K1002v1 Router today and now I can't print to my dell 968 aio printer from my laptop. the printer is connected to the desktop with a usb cord and was working with the old router?this info is from my laptop:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista� Home Premium , Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3061 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb
Hard Drives: C: Total - 225874 MB, Free - 126104 MB; D: Total - 9999 MB, Free - 5832 MB;
Motherboard: Dell Inc., 0U990C, , .DHF4PF1.CN7016686601RZ.
Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Updated and Enabled
View 5 Replies
View Related
Apr 6, 2011
I have three machines that run dos5 and are unable to be networked (for various reasons). I am able to print the screen of each system but I want to share a printer amongst all of them. As it turns out they are on completely seperate sides of the room and a way to setup a seperate computer to act as a print server allowing me to do the following:
DOSBOX-->parallel port-->printserver(computer)-->ethernet port-->networked printe.
My goal is to move the printer to a different room too.
View 4 Replies
View Related
Apr 4, 2012
There would appear to be a general problem with printing from a wireless laptop, judging by the number I've come across in the search for a solution to my particular problem.My Set-up is:BT Home-Hub (up to 8 MBs Broadband DSL connection with outputs of two ethernet ports and Wifi, telephone and USB
- port 1 connected to Vista PC
- port 2 connected to 8 port Netgear switch.
Netgear switch.
- port 1 input from BT Home Hub
- port 2 connected to TV
- port 3 connected to NAS
- port 4 connected to Samsung CLP 620 ND colour laser
- port 5 connected to this desktop PC (Win 7/64bit)
- ports 5 to 8 as yet unused.
Other PCs
- desktop running XP SP3 connects through WiFi
- old Toshiba laptop running XP SP 3 connects through WiFi
- new HP laptop running Win 7 SP 1 connects through WiFi
- Acer laptop running Win 7 SP1 connects through WiFi.(WiFi computers not necessarily connected all at the same time)
The issue.This desktop can print via the network..All XP pcs/laptops see the printer on the network and can print..The Win 7 laptops see the printer on the network, but when asked to print a test page, the document gets stuck in queue until it gives the Error - printing message. If the printer is sleeping, when the test page is sent, the Samsung print dialog panel on the laptop remains showing "Printer is sleeping..." as if no commands are being sent to the printer (and therefore why nothing prints). Cancelling the document returns the printer to normal - ie the exclam mark in the yellow triangle disappears and is replaced by a tick. When the laptop is shutdown, and then restarted maybe a day later, if the printer is on, it jumps into life and prints the test page from the laptop.I should add that the laptop is also part of the HOMEGROUP and can see the printer via this PC when this PC is on - and it can print via this PC in the HOMEGROUP. Both the problem laptops have the up to date Samsung drivers although it took an age to install - it seems to get stuck on the "Detecting TCP/IP Port" page and then goes to a page headed Additional port info required. On selecting Samsung Printer, it moves on to Detecting Driver Model, gets stuck there until it moves on to the old Add Printer dialog with Manufacturers in the left pane and printers in the right.
View 1 Replies
View Related
Oct 13, 2011
Trying to print from a Dimension E521 using Dell AIO Center to a hard-wired networked 962 printer hosted on an Inspirion 530 using a LinkSys WRT54G V8 router. Cannot scan or fax from the Dimension via the network. During software install, the printer is not automatically detected on the network and it has to be manually assigned. Attempt to print test page via the network during software install results in a document in the print queue that hangs the printer with a print error. After the aborted test page, nothing works.
Using the VISTA Control Panel can successfully set up the printer and can print a test page to it. In this case, the printer install CAN see the printer on the network, so I don't think it is a network issue.
However, if the control panel is used to install the printer, the AIO center cannot find it at all and displays an error that software and drivers are not installed. Yes, Network and Sharing are all set up correctly and, no, the Firewall is not the problem as it is turned off on both machines.
Drivers are not the issue. I have deleted the drivers and reinstalled them so many times in the last week I can do it in my sleep.
View 4 Replies
View Related
Apr 16, 2011
I have an HP Photosmart 7150 networked on a Win7 PC. I followed the below directions to set up the share on my Mac with SnowLeopard. My issue is that a file that is, say 700 kilobytes gets transmitted to the spooler as several megabytes. As a result when I print a file it runs through all of the paper in the tray. If there is enough paper loaded it will eventually print the file. Somewhere in the middle it will print several pages of garbage.
Make sure your printer is on and connected to the USB port on the router.In OS X go to System Preferences.Click on Print & Fax.Click the lock (to unlock) to make changes. Enter your password if you need to.Click on the plus (+) sign at the left to add a printer.In Leopard/Snow Leopard click on the IP tab.In the Protocol drop down, select HP JetDirect - Socket.In the Address drop down, type the IP Address of your printer (192.168.1.10)Leave Queue blank.
Give a descriptive name [Network Printer].Give a descriptive location.In the Print Using drop down either select your driver or choose the "select a driver to use" option.Choose the appropriate driver for your printer.Press OK and then click Add.
View 1 Replies
View Related
Nov 7, 2011
All of a sudden my browser wouldn't connect to any websites. Tried f.fox, IE and Chrome. But I could connect to the router and other devices, and another computer on the same router could connect to the internet. I use OpenDNS and started getting weird messages about my IP address being used by another user. I changed back to the ISP's DNS but it did not cure. In the end I used system restore back a couple of days and now all is well
View 5 Replies
View Related
Aug 31, 2012
I have been using the same wireless setup in my home for over a year. We have a Belkin Surf wireless router and an Arris modem from Comcast, using cable internet from Comcast. In the house, we have 5 devices that are set up to automatically connect wirelessly: iPhone 4, an old iPod touch, a MacBook Pro, a Toshiba laptop, and a Brother printer. Until recently, there has never been a problem with connectivity.
Lately, certain devices have been losing connection. For example, last night my husband and I were both using our laptops with no problems.This morning, his is connected and my iPhone is connected,but my Mac is not (I get a timeout error and am not connected to the internet). Sometimes it's his laptop that drops the connection. Other times it's my son's iPod or my iPhone. It is never all of the devices at once (something is always connected), and each device always recognizes the network as existing yet cannot connect to it.
I have also tried to change the channel that the router is set to, but that has not seemed to solve anything. The firmware is up to date. We are password protected in an area with few neighbors, and there never are any unknown devices connected when I check the client list for the router.
View 10 Replies
View Related
May 17, 2012
I have a home WI-FI network on windows 7 with an attached NAS drive for my media (plugged into the router).I was wondering how I would connect my work PC to the Wi-FI Network so it can access the media but disable the internet from only that PC.I have seen suggestions about blocking the work PC's IP in the router settings and something about MAC addresses, but was more hoping there was something simple I could disable in the network settings on the PC itself.
View 1 Replies
View Related
Apr 28, 2011
new computer installation. networked computers. one prints other doesn't. i downloaded driver on to problem computer. am not sure how to install it though. it doesn't appear anywhere once i downloaded it! windows 7 64 bit
View 3 Replies
View Related
Aug 3, 2011
I have several networked printers in my office. Two users stopped being able to print today to any of the networked printers. Everything else works fine. I have tried everything I can think of
View 1 Replies
View Related
Aug 12, 2012
I want to copy a font file from the Fonts Folder in networked PC (B) but can only see Documents Folder and subfolders. Windows 7 OS. I'm working in main PC (A) -- No monitor, mouse or keyboard connected in PC (B).
View 3 Replies
View Related
Jan 21, 2011
I have a router with a motorola cable modem connected to my linksys router. In this network I have a windows XP computer wirelessly connected to the router and a networked disk drive wired to the router through a netgear switch.I am trying to move a lot of files from the XP computer to the networked drive.Everything works great as it will move files for as long as everything is up and running. As soon as I attempt to change the status of the modem from on-line to off-line with the push button on top of the modem, my XP computer loses connection to the networked drive.Why is this happening? I would think the xp computer and network drive are below the modem inside the network so losing the internet connection from the modem should only affect the internet connection
View 1 Replies
View Related
Mar 18, 2011
I work at a small private school for languages and we have 3 public computers for the students to use for general stuff, internet research, facebook etc etc. Now every week i go to the comps and make sure their running well etc etc but every time there is new stupid things being installed by the students. Anyway, i wanna put a stop to this activity. the computers are not a toy for this lot but a tool and if they need a program for something to come and ask. As it stands the comps are all win 7, and are connected to the network via WIFI. the network is a simple zyxel router. There is another office comp connected to the router running Win XP pro and i also have a spare comp in the office which is unused.
View 3 Replies
View Related
Sep 1, 2011
Long story short, I have a Asus CG5270 desktop with a cdrom that DOES NOT work and a hard drive that is totally wiped clean of any operating system. I also have a router and a perfectly working laptop with Windows 7 64bit home premium on it. I do not have a crossover cable or external hard drive. I have the recovery disk for the desktop which is Vista 64bit home premium SP1.Can I or can I not use the laptop to reinstall Vista on my desktop?I've found this question asked countless times in countless forums but also countless answers that do not answer the question for a person that is not a computer engineer.
View 2 Replies
View Related
Jan 31, 2011
I have networked two computer with printers attached to each. PC1 is with a brother printer attached PC2 with a HP 1100 attached.In the past I had no difficulty with networking the computers and have access from each computer to each of the printers.
I up graded the computer Susan and I am now having a few problems that I never had before.After I perform the Network Setup Wizard on each of the computers (in many different methods) I am having the following problems.First, every now and then I am getting the following message after double clicking on Entire Network then Microsoft Windows Network:
Entire Network Not enough storage is available to process this command.If I wait a few moments I will get the MSHOME and am allowed to click on that. After this I do see both guy and Susan. If I double click on guy I see items pop up. If I click on Susan I get the following message:
Susan is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path is not found.Of course I can not add the printer from Susan either. Though I have had no problem adding the printer from guy to Susan. And it prints properly.
View 14 Replies
View Related
Apr 4, 2012
Just purchased a DIR-655 Rev B router, old Belkin F5D9230-4 Died. Home Network wired and wireless. 2 XP desktops wired (one thru DIR-655 and the other thru an Ethernet switch unit (not a router)), iPad II, 1 XP Laptop used mostly wireless but at times wired, 1 Windows 7 laptop wireless, plus HP Photosmart 8450 wired thru switch. ISP is Starband satellite.
All was working great until I replaced the Belkin with the D-Link. I have lost the HP-8450 and have tried until the cows came home but it will not install from HP software from any computer on the network.
View 8 Replies
View Related
Apr 12, 2012
have a computer that connects to the internet via a wireless network connection. The router to which it connects is not physically available.I have a device that I want to connect to the internet. However, it is a wired device. The device cannot reach the wireless router that the computer connects to.Is there any way for the wired device to connect to the computer as an intermediary? The computer has a built in wired network card (as well as a USB wireless device that connects to the wifi router).
View 3 Replies
View Related
Dec 7, 2012
I have a new windows7 installed laptop. I couldnot connect to the networked computers which are in Windows XP. All printers and other pheripherals are connected to windows XP computer.I tried to connect even through wired router, still it doesnot detect the printer connected to the XP -Pc
View 9 Replies
View Related
Nov 25, 2012
I've recently bought a wdtv live streamer to play all my music and videos.
Firstly, my setup. Wdtv live connected via USB3 to 1tb wd elements hdd. Also connected via rj45 to router. Laptop on same network, but wireless.
My first question concerns transfer rates. When sending any kind of media to the networked drive from my laptop, I'm only getting transfer speeds of about. 2 mb/s. I thought I would get much more than this as when the wdtv streams to my iPad, it will need faster speeds than this.
The second question is just to make my life easier. Is there any way I can set up folders on my laptop to automatically sync with a chosen folder on the networked hdd? Just to save any effort on my part really
What I want is if I import a cd using iTunes into my library, it will automatically see it and copy it across to the hdd so I can play it over the network.
As an aside, would it be easier to store my whole iTunes library just on the networked drive?
View 2 Replies
View Related
Feb 18, 2012
Ok I have 8 computers 2 computer will have a camera attached to it importing photos as they are being shot. (2 photo stations) Trick is I need to transfer all photos taken in real time to the remaining 6 computers at the same time. What is the best way to do this and what software to export all photos to the six computers. I'm running windows 7. I set this up as a home group but it was really slow. When I tried to use a network printer it would freeze the network? I need it to monitor new files as the photos come in. Also all photos also need to be copied to 6 different computers so guest could access their photo on any computer.This is how I currently have it set up. I have 2 Computers with cameras attached that takes the photos and sends them to PC1 (My Server Computer) The server computer also has the network printer attached. Each photo is about 300K-500K size.
Different photo is transfer every 15 seconds. The server computer is also connected to the other 5 Computers. The guest goes to one of the computers, scans a card and their photo pops up which is located on the server computer, they also have an option to print the photo. The problem is when the guests scans their card the photo is very slow to pull up ( about 15-20 seconds ) Second is when they hit print it freezes up sometimes for up to 2 minutes. I connected as a home group and first did connection wireless Then connect everything through a Ethernet cord which speed it just a little not much. Questions Do I need a better server computer?
View 9 Replies
View Related
Aug 27, 2012
here is my set-up.
(upstairs)
Windows 7 64 bit pc (2year old),
Netgear DGN2000 wireless modem/router,
Seagate GoFlex Home NAS drive,
D Link Powerline AV Network Kit,
(downstairs)
D Link Powerline AV Network Kit,
Yamaha RX-V671 AV Amp,
Panasonic TX-P42V20B TV,
TP-Link 5-port 10/100Mbps Desktop switch,
From the first time I set this up I have had problems in seeing all the folders I put onto the NAS drive for streaming to my TV and AV amp.Half of my music folders From the letter K upwards simply disappear from the menu view on my amp after I switch it off then back on the next time I want to listen to it. When I check the NAS drive on my PC, all the folders are still there but are not accessable downstairs on the amp.I can re-transfer the "missing" folders and it's fine till I next switch off and on again and its always from the same point that the folders are missing.The TV is also suffering from the same problems when I want to view photos and videos which are present in the drive upstairs but not visible on the menu on the TV (all missing on the TV!)Everything is connected with cat6 leads and I can stream internet radio (which is built into the amp) without any problems so it seems to me to be a communication problem between upstairs and downstairs.My house wiring has all the sockets on one ring main so that should be ok but I wondered if the router was not up to it with it not being a gigabit router.
View 4 Replies
View Related
Feb 24, 2011
I have 2 Windows 7 desktops that are both connected to seperate vonage boxes and those vonage boxes are connected to my D-Link DIR-655 router. That D-Link router is getting its connection from a Comcast router. I am looking to get one of the desktops to share a printer from the other one which has it hard wired via USB cable. When I first set this up I did not have the vonage boxes and the desktops were connected right into the router and everything worked fine. Now that the vonage boxes are in place it is a mess. I can get internet fine on both machines, but no file/printer sharing. I have followed all the steps to setup the correct workgroup and file and printer sharing options on both windows 7 machines but they cannot see each other at all. My feeling is that now that the vonage boxes are there that instead of the desktops looking at the D-Link router for its sharing option they are looking at the vonage boxes and that is why they cant be seen. Does this make sense? Is there a firewall on the vonage boxes stopping these two desktops from seeing each other? Do I have to change something on the D-Link router options for it to give access to the vonage boxes for these 2 machines to see each other for printer/file sharing?
View 5 Replies
View Related
Dec 6, 2011
I have a toshiba laptop with windows 7 installed(IE 9)and it connects to my wireless modem just fine i have 2 othe home puters that is networked so that i can access both on my laptop. the problem i have is this i have to take my laptop with me to work and hook up to customers modem no problems there. when i get home and reconnect to my wireless modem i have no problems accessing then internet. but for some reason i am not able to access the other 2 puters that was networked previously. I have tried to repeat the netork setup with no luck the only way i can get my network setup the way it was before i have to do a system restore.
View 4 Replies
View Related
Mar 21, 2011
I have 2 desktops (running windows 7), a Canon MF8300 printer, and an outgoing ethernet line, all on a Netgear Advanced Cable Modem Gateway CGD24-CPR. I'm only concerned with having the 2 desktops set up with the Canon printer.Both computers have been connected to the printer before and I have the startup disk. But once the new offices were set up and both of the desktops were moved, I can no longer access or find the printer.
I can IPconfig the Desktops for their IPV4 addresses and both desktops recognize eachother on a Homegroup, but I can't find the printer. I printed off the print configuration page from the printer which gave me an IP address (printer is set for auto-obtain), but using an IP search won't bring up the printer.All of the devices are plugged into ethernet ports set up for the three different office they are in and the actual location of the Netgear cable modem/router is over 100 feet away. My primary concern is getting the printer for the desktops, but I also need to add a wireless router into one of those office in the future.
View 15 Replies
View Related
Jun 23, 2012
I have configured 2 RV042 VPN with different ISP. Tunnel connected successfully and i can ping each other router but i can access clients which are connected to router. I have added rules also in firewall.
View 1 Replies
View Related
Nov 10, 2011
I've installed a RV042 and my terminals cant even ping each other. They have Internet, but they cannot ping each other, or open network shares. It is not a dns problem becouse it does not work with the IP.
View 1 Replies
View Related
Jun 7, 2011
I have a problem with the router Linksys RV042, I made a backup of it that contains a file with the extention .exp Now we have buy a new Rv042 made by cisco and the backup file is .config the question is how I convert the .exp file to a .config file so I can Restore the backup in to the new router?
View 1 Replies
View Related
Aug 8, 2011
I am setting up an RV042 for my small business office and I am trying understand how it needs to be configured.
-For WAN1 I have a Wildblue Satellite Modem connected IP 70.66.93.4
-For WAN2 I have a Cradlepoint CTR35 Router with a verizon AirCard Connected IP 192.168.0.1
(Verizon has a 5GB download limit and wildblue has a 17GB download limit but it drops out in poor weather)The LAN is IP 172.16.0.1 Subnet Mask 255.255. 255. 0Should I set the RV042 up as a gateway or as a router?
View 1 Replies
View Related
Jan 17, 2011
I would like to the the RV042 for a one to one NAT, but I need it to NAT to an address that is not on it's local subnet. I have it routing properly to the address, but web interface only allows adding an IP on the local subnet. Is there a way around that?
View 1 Replies
View Related
Mar 24, 2012
We have 3 Cisco RV042. These were purchased to permit VPN from two branch offices to our head office. VPN is required to permit the two branch offices to use Avaya IP phones to connect to our main head office switchboard.We also have users on Blackberry and Apple iPhones to collect their mail through OWA from our Exchange 2010 server.
I've noticed in one of your threads that the RV042 routers configured for VPN do not permit the use of HTTPS to connect to OWA and that seems to be the problem for us. Since installing the VPN our OWA access is not possible.
What can I do to resolve this problem and what router would you suggest that I could use at the head office to enable the two branches to connect VPN to head office? And if there is a suitable router, would I need to replace all three?
View 1 Replies
View Related
Mar 21, 2012
I have a Linksys RV042 10/100 4-Port VPN Router with Firmware Version 1.3.13.02 and l have noticed that the Router keeps rebooting on average every couple of hours.We have it setup for Load Balancing 2 ADSL Services.
View 3 Replies
View Related
May 16, 2012
I have been able to put two Linksys routers in series no problem but this doesn't seem to work with an RV042.I have a number of customers that need to connect to a private email network via a router based VPN, but since VPN traffic is not filtered in the firewall, I would like to use an older Linksys router to manage the VPN(s) and have it pass data in through the filters of an RV042 on the DMZ port.I am getting stuck on the very frist part of this. Although I can connect to both the RV042 and LinkSys directly (by adjusting my subnet), I cannot ping the Linksys when it is connected through the DMZ port even if I disable the RV042 Internet port.
I know both the Internet and DMZ ports work on the RV042. I suspected that perhaps the RV won't pass through private IPs and tried known available pubic IPs instead of the 192.168.2.x subnet, but still no ping.What would be limiting the RV in this case? Is is possible to setup the RV to work in series with another router? Is there any other way to filter VPN traffic?
View 6 Replies
View Related
