Can Connect To Router And Networked Devices But Not Internet
Nov 7, 2011
All of a sudden my browser wouldn't connect to any websites. Tried f.fox, IE and Chrome. But I could connect to the router and other devices, and another computer on the same router could connect to the internet. I use OpenDNS and started getting weird messages about my IP address being used by another user. I changed back to the ISP's DNS but it did not cure. In the end I used system restore back a couple of days and now all is well
View 5 Replies
ADVERTISEMENT
Aug 31, 2012
I have been using the same wireless setup in my home for over a year. We have a Belkin Surf wireless router and an Arris modem from Comcast, using cable internet from Comcast. In the house, we have 5 devices that are set up to automatically connect wirelessly: iPhone 4, an old iPod touch, a MacBook Pro, a Toshiba laptop, and a Brother printer. Until recently, there has never been a problem with connectivity.
Lately, certain devices have been losing connection. For example, last night my husband and I were both using our laptops with no problems.This morning, his is connected and my iPhone is connected,but my Mac is not (I get a timeout error and am not connected to the internet). Sometimes it's his laptop that drops the connection. Other times it's my son's iPod or my iPhone. It is never all of the devices at once (something is always connected), and each device always recognizes the network as existing yet cannot connect to it.
I have also tried to change the channel that the router is set to, but that has not seemed to solve anything. The firmware is up to date. We are password protected in an area with few neighbors, and there never are any unknown devices connected when I check the client list for the router.
View 10 Replies
View Related
Apr 4, 2012
I've been using a Linksys WRT54GSV4 router since November 2005, and have rarely had any problems with it. Now today after the power went out, devices cannot connect to the internet.My PC connected directly to the cable modem results in internet connectivity.My PC connected to the router allows router access through 192.168.1.1.My PC connected to the router can NOT access the internet or otherwise get out to the modem.WiFi devices in the house cannot connect to the internet, but can still access the router through 192.168.1.1.Swapping cables results in the same behavior, so the PC can connect to the modem with either cable, and the computer can connect to the router with either cable.
View 1 Replies
View Related
Jul 10, 2012
Reciently I bought a WRT120N Router to get a better internet connection and to have more capacity to connect different wireless devices, because the modem from my internet provider company is extremely restrictive.
I use an iMac, a Notebook with Windows 7 and a Netbook with Ubuntu 11.04, besides different devices (iPhone, iPod, PS3, Kindle). Although when I configured the router I connected every devices simultaneasly, with better signal quality than before, after using it for a couple of days I found that it disconnects itself, I can't access internet, and my only solution it's to switch it off and on.
View 1 Replies
View Related
May 17, 2012
I have a home WI-FI network on windows 7 with an attached NAS drive for my media (plugged into the router).I was wondering how I would connect my work PC to the Wi-FI Network so it can access the media but disable the internet from only that PC.I have seen suggestions about blocking the work PC's IP in the router settings and something about MAC addresses, but was more hoping there was something simple I could disable in the network settings on the PC itself.
View 1 Replies
View Related
Apr 12, 2012
have a computer that connects to the internet via a wireless network connection. The router to which it connects is not physically available.I have a device that I want to connect to the internet. However, it is a wired device. The device cannot reach the wireless router that the computer connects to.Is there any way for the wired device to connect to the computer as an intermediary? The computer has a built in wired network card (as well as a USB wireless device that connects to the wifi router).
View 3 Replies
View Related
Dec 7, 2012
I have a new windows7 installed laptop. I couldnot connect to the networked computers which are in Windows XP. All printers and other pheripherals are connected to windows XP computer.I tried to connect even through wired router, still it doesnot detect the printer connected to the XP -Pc
View 9 Replies
View Related
Mar 1, 2013
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
View 12 Replies
View Related
Nov 14, 2012
My internet down my road went out a while ago for a week and it came back on fine but ever since the B.T. tech came over after to check the router it's been only allowing a couple of devices on at a time!I know it's not the devices because if I keep turning my router off and on it will work eventually but when reset then something else can't connect.Here is the details from a pc that i've got connected:Windows IP ConfigurationWireless LAN adapter Wireless Network Connection[CODE]
View 14 Replies
View Related
Sep 29, 2012
My laptop stopped connecting to the Internet eventhough our other laptop has no issue - tried resetting modem, router and bypassing router -- it shows my wireless network and says its connected as local only - tried TCP/IP reset and restarted but still same, when i did the winsock, ipv4, ipv6 command prompt i get an error on the ipv4 - resetting echo request failed? I also tried uninstalling my network adapters in safe mode and restarting but same issue still
View 7 Replies
View Related
Feb 3, 2013
I have just switched to a new internet provider (UnityMedia in Germany) and they provided me with a CISCO cable modem (EPC3208G) and a 'wireless N 150 Home Router DIR-600' (hardware Bx and firmware 2.13). I had to ring the service desk to complete set up. I was told to connect the LAN cable (from the modem) into LAN number 1 rather than 'internet' (in the router). I was also told to change the router IP address to 192.168.0.2. Thereafter the connection to the internet was established (they also asked me to make some other changes which I can no longer recall). However after the phone call with the D-link service desk I attempted to connect my other internet enabled devices (kindle, internet radio and smartphone) and apart from one other laptop nothing can connect to the internet.
View 5 Replies
View Related
Oct 31, 2012
I recently shut my computer down overnight, something I never do. When I booted it up the next day I had no internet connection. My computer is a desktop that's hard wired to a router and the modem. My son has a computer and an Xbox, both attached wirelessly to the router. Both of his computers are working mine is not. I keep getting a message saying "network is unidentified", but it won't let me pull up any networks. Its telling me there are no networks in my area. I have tried recycling both the router and modem numerous times, I even tried restoring my system to a date from last wk.
View 1 Replies
View Related
Jun 13, 2013
I have a setup with a Cisco RV042 router connected as follows: Broadband Motorola Surfboard -> Cisco RV042 -> Wireless Router [code] The Surfboard has a wireless N network, though the other wireless router runs on G for compatibility reasons.
The problem I am having is that I have a printer connected to a Windows computer on the wireless N router (with a static IP address), and I need computers on the G network to be able to use the shared printer. The printer is shared, though not through Home group.
On the other computers in the house (on the G network), I cannot see the server in the list of computers on the network, and I cannot seem to manually add the printer by typing in the IP address.
how can I get other computers to detect the server connected to the printer, or what IP address/port/URL do I specify to connect to a shared printer on that PC?
View 2 Replies
View Related
Sep 14, 2012
At home, my current setup is:
1. Motorola SBV5220 Surfboard Cable Modem for internet
2. Rosewill 8 Port Switch RC-406X
And I have:
1. Dell Q6600 desktop running on Windows 7
2. Dell Latitude laptop running on Windows XP
3. Xbox 360
These all need access to the internet.Up until now, everything worked fine. The Motorola modem was connected in Slot 1 and my desktop, laptop and Xbox were all 3 connected into slots 2, 3 and 4.The other day, I accidentally pressed a switch in my home that switched off my modem. Anyway, once everything was reset, things changed.I can no longer be on the internet with all 3 devices at the same time. Either only the laptop can be connected, with the 2 other devices being offline, or just the desktop and not the laptop.Whenever I gain access to the internet via the desktop, it shows as Network 10 and if I try and repair the connection on the laptop, it says it is unable to renew the IP address. If I switch it up and I have access on my laptop but try and have access on the desktop, the network shows up as Unidentified.
View 4 Replies
View Related
Aug 16, 2011
I have a Dell desktop and a dell laptop. I got a new belkin n300 F9K1002v1 Router today and now I can't print to my dell 968 aio printer from my laptop. the printer is connected to the desktop with a usb cord and was working with the old router?this info is from my laptop:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista� Home Premium , Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3061 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb
Hard Drives: C: Total - 225874 MB, Free - 126104 MB; D: Total - 9999 MB, Free - 5832 MB;
Motherboard: Dell Inc., 0U990C, , .DHF4PF1.CN7016686601RZ.
Antivirus: Lavasoft Ad-Watch Live! Anti-Virus, Updated and Enabled
View 5 Replies
View Related
Oct 11, 2012
All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
View 1 Replies
View Related
Sep 3, 2011
I just bout a lynksys wireless adapter to connect my dvr to the internet. I would also like to connect my Blu Ray player. Can I do this with an 'ethernet splitter'?
View 1 Replies
View Related
Jan 7, 2012
My wireless devices are having a hard time connecting though my router. They see the router and can connect to it but cannot get on the internet. When I go into my router and check Wireless Status to see connected devices the window is empty. Usually if I reboot my router some of my devices will connect but if I leave them idle for any amount of time the connection is dropped. Suggestions. I have Dell 530 desktop running Vist Home Premium and the router is Dlink Dir 615. The desktop has no issues connecting to the internet as it is connected through LAN port
View 2 Replies
View Related
Oct 2, 2012
I want to connect my ps3, sky hd+ box and samsung smart tv. Upstairs is my wireless router and I have connected to this by using a power supply networking adaptor (duvelo). I have since purchased a cheap ethernet switch from ebay and plugged this into the power adaptor connection next to my ps3, sky hd+ and samsung smart tv downstairs. I thought by connecting these 3 devices to the switch (which is connected to the duvelo adaptor) I could have all 3 devices simultaneously connected online. However, I still can only have 1 ethernet cable in the switch at once and hence only connect 1 device at a time.
View 2 Replies
View Related
Feb 15, 2013
I have a D-Link DIR-652 router, and I can see that it is broadcasting but I cannot connect through my laptop, tablet, or phone. Sometimes it will let me connect but other times it says it is unable to. I can connect when I plug into the router through a cable. I'm doing that now, and I did an ipconfig/all in case to see that:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kyle-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 10 Replies
View Related
Feb 12, 2011
I have 3 laptops, 2 tivos, wii, ipad, i touch, etc..... how many items can connect to one router without drops outs? My internet keeps dropping off since my last device connected to my wireless home network and we have to keep hitting the reset button. Do different routers support more devices than others?
View 4 Replies
View Related
Mar 1, 2013
I currently have an old Linksys WRT54G router with 4 ethernet and 1 internet port. I have an old Sprint 660 modem connected to the router for internet access. I am also using 3 of the 4 ethernet ports for wired devices (main PC, NAS drive and Dish Network net access). I have another PC and a printer connected wirelessly to the router.Now, with my modem going bad, CenturyLink has provided a combo modem/router (EQ660DR-F1) to be used in place of my Linksys router/modem, providing wired, wireless and modem capabilities in one.My problem is that the new router/modem has only one ethernet port along with a DSL port. Obviously, I can connect my main PC to the ethernet port, DSL to the modem port and connect my 2nd PC and printer wirelessly as they are now. How I might connect my other 2 wired devices, possibly by a hub, AP or bridge or some other means? Can one of these be connected by wireless to connect the other 2 devices, or do these have to be connected physically by wire?
View 2 Replies
View Related
May 12, 2013
For some reason, handheld devices cannot connect to our wireless dlink router. However, our HP laptop has no issue with connecting. Regardless of the make and model, no one else can connect at our home.
View 5 Replies
View Related
Jan 21, 2013
I cannot connect to the WiFi router, an all-in-one modem+router provided by my ISP. Now, I run an Ethernet cord from the router to my computer: the computer works just fine. As of a day ago, though, none of the home's Apple devices will connect to the network, despite reboots, password retypes, and shouting at them. Each device (two phones and an ipad) can identify my network, but they cannot join. Additionally, there is an old laptop that cannot connect anymore.
View 7 Replies
View Related
Mar 1, 2013
I have the firmware 2.10NA. In my home we have about 4 laptops and 4 smartphones connecting to this router wirelessly and 3 of the laptops often lose connection for hours. We have tried unplugging the router and plugging it in again and factory reset and also resetting it through the IP address but the connection doesnt come back. Recently it has gone out for about 3 hours now. Also the wireless LED icon on the router constantly blinks is this normal? On the laptops where theres no connection it says limited connectivity. Is it possible that there is too many devices connected to the router or something. or could this be a problem with the laptops and not the router?
View 6 Replies
View Related
May 3, 2012
can't connect all my devices like an Iphone, Nook or another computed to the wireless network with the e2500, we have three devices but the others can't connect.
View 3 Replies
View Related
Mar 30, 2013
Just installed a Linksys N750 (EA3500) router (WAN - LAN setup). I settled both band networks : 2.4 Ghz and 5Ghz with different SSID and different WAP2/WAP personal mixt. WHile some devices will show both networks correctly, I'm facing issues with the 5Ghz band and wonder if this is sigh of some kind of failure:
- while my iPad offered both signals and let me set the 5 Ghz band, it is showing weak signal and stall on loading webpages; as soon as I instead put it on the 2.4Ghz band, (standing at same location of course), everything runs smoothly, excellent signal.
- I have a Mac Mini and PS3 side by side same location. The Mac Mini seems to works flawlessly under both bands, 2.4 or 5 - excellent signal. However, the PS3 fails its connexion test and states that signal is not perceptible on the 5Ghz. But connect as a snap on the 2.4 Ghz band.
- Got on and off 5Ghz signal on a laptop; connected to 2.4Ghz, everything runs perfect.
- iPhones 4S : I don't even see the 5Ghz SSID, but I get both the 2.4 and Guess account..So I'm tempted to conclude that some devices just can't follow the pace (??) to connect on 5Ghz..
View 4 Replies
View Related
Aug 14, 2011
I've been using a WRT160N for a couple of years now with no problems with any of my devices. I have a couple of certain devices (a DS and a PSP mainly) that utilize 802.11b and have been working perfectly up until now.
All of a sudden it seems like the router has decided all by itself to no longer allow 802.11b devices to connect to it, despite it being configured in mixed mode. (b/g/N) I've tried tinkering around with it, switching between Mixed and BG-Mixed, changing the channel to something more common and restarting the router, but I can't connect at all on these devices.Model: Cisco Linksys WRT160N v3.Firmware version: 3.0.03.
View 1 Replies
View Related
Feb 24, 2012
I just installed a WRT320N for someone's home network, with the intent of providing better speed for network printing.
Unfortunately, all four of his n-capable Windows computers will only connect at 54mbps. Four different computers (Win7, Vista, XP), each with a different brand/model of n-capable network adapter.
I suppose I could try setting the wireless to n-only instead of "mixed". However, he's got a couple g-only devices as well, so that wouldn't work.
I tried updating the firmware to latest/greatest - no effect.
View 5 Replies
View Related
Nov 29, 2012
Region : UnitedStates
Model : TD-W8961ND
Hardware Version : V2
Firmware Version :
ISP : ATT
I want to add more users to my home network and I couldn't, at this moment I only can connect 8 devices (12 devices at least) when I try to connect the next one its impossible, but if I take off one of the connected devices then the router allows to connect the new one.How can I connect more than 8 devices to my router ? (wireless)Also, is there any limits with Wireless MAC Address Filter ? because I can't add more than 8 MAC addresses in my old router I could do that.
View 4 Replies
View Related
Sep 15, 2011
I was requested to connect 2 WRT54G devices in our network with same ip range.
View 2 Replies
View Related
Dec 2, 2012
Just installed the E3200. Can connect other computers but not IOS devices to the router, except through the "guest" port.
View 2 Replies
View Related
Sep 28, 2011
I have several devices connected to my EA4500 (two wired computers, two wireless laptops, iPhone, iPad, and a network drive). i have not been able to connect any new devices wirelessly. New laptops, PS3, friends laptops. Error message would suggest that password is being entered incorrectly, but I change the password to very basic word (idiot proof) but no luck.
View 9 Replies
View Related
