Routers / Switches :: How To Make Wan
Jul 11, 2011how can i make 3 computers connected wanly
View 2 Replies
ADVERTISEMENT
Routers / Switches :: How To Make Sure I'm Not Being Hacked
Feb 2, 2011How can I make sure I'm not being hacked by a jerk neighbor? Until recently his D-Link repeaters IP addresses showed up on my T Mobile tethered connection.
View 3 Replies View RelatedRouters / Switches :: How To Make Communication Between 2 LAN
Feb 9, 2011I have a 2 router and each one have separate network with DHCP and IP of the two routers are 10.4.251.1 and 10.4.252.1. I am using linksys WRT54gl router with tomato firmware.how can i make communication between these two networks. I want access files from 10.4.251.x to 10.4.252.x and vice versa.
View 1 Replies View RelatedRouters / Switches :: How To Make Central Database
Nov 22, 2011I have got cable modem and its output is connected to netgear router n150 wireless router model wnr1000v2.now 3 desktops and one laptop is wired to that router through 4 lan ports. now i need to access internet from all systems.and also make one system as central database so that everyone can share and use all work files.one printer is connected to one system.i also need to print docs from all systems.
View 1 Replies View RelatedRouters / Switches :: Make Dlink Dl2670 Work With 3g Usb?
Feb 1, 2012Is it possible to change the firmware on my dl2670 router so i may use my 3g usb stick, as the router does have usb ports?
View 1 Replies View RelatedCisco Switches :: Cannot Make Any Changes To SF-302-08MP
Nov 7, 2011This is the third series 300 switch I've configured, but have not run across this issue before. I've attached to the switch via the console port and even tried with the web interface but get the same results. Upon booting the switch asks for the default user ID and password, then it prompts to change the password. I do this and then go to configure the device with the new IP address, add a new user ID and password and VLAN. All changes seem to save as I get no errors. However, when the device is rebooted, all changes are lost. I've even went so far as to delete the startup-config file but still no luck. Version information is as follows:
SW Version: 1.0.0.27 (Date: 28-Apr-2010, Time: 13:33:55)
Boot Version: 1.0.0.4 (Date: 08-Apr-2010, Time: 16:37:57)
HW Version: V01
Cisco Switches :: Possible To Make Stack With 3 SG500-28
Jun 2, 2013I wonder if i can make a stack with 3 SG500-28.
View 1 Replies View RelatedMake High Availability Between Two Cisco 3560G Switches?
May 7, 2012We want to make High Availability between two Cisco 3560G switches. Can you tell how we should proceed?Is there any HA module available for Cisco 3560G?
View 1 Replies View RelatedSwitches :: What Kind Of Modem And Wireless Router To Make DSL Fastest
Oct 1, 2011Does it matter what kind of modem and wireless router to make DSL the fastest? Also is a modem with built in wireless better than having separate units?
View 4 Replies View RelatedCisco Switches :: To Make Internet Connection The Source For SG300
Apr 11, 2013First of all, is there a document on the SG300 that explains everything in plain english?Here is what I am trying to do...I have a Charter Communications connection to the internet through their modem.This modem has a static IP.I would like to make this internet connection the source for the SG300 and all the other ports be DHCP.I was told when I purchased it that being a layer 3 device.
View 3 Replies View RelatedCisco Switches :: ESW 540 8-port Way To Make Device Behave Like Boring In-managed Switch
Mar 18, 2013I bought an ESW 540 8-port switch, mainly for the POE capability over all 8 ports, so that we can power some SPA50X phones.The concepts of a "managed" switch are challenging for a newbie.Is there a way to make this device behave like a boring "unmanaged" switch ??We have plenty of bandwidth, and don't need to be troubled by QoS and virtual LAN's, or all the security stuff at this time.Making this device work like an unmanaged switch (aka plug-and-pray).
View 2 Replies View RelatedCan Have 2 Routers And Make 2 Separate Wireless Signals
Mar 3, 2011Can I have 2 routers and make 2 separate wireless signals? Reason being I need one so that I can keep net blacks for my little brother but I would like my net not to have any restrictions.
View 1 Replies View RelatedCisco Routers :: How To Make Subnet With RV042
Jul 10, 2012I have RV042 Router, I'm using only one Internet conection, I'm using IP group like this 192.168.95.x, my DHCP setting use 192.168.95.120 to 192.168.95.240, but in this time I have 245 workstations (may be I will have 25 additionals workstations) and some times I see IP conflict message in my current work stations.
I had read about SUBNET like response about my problem, but I'm not sure about that and how to make subnet with my RV042.
Cisco 2611 And 1761 Routers - Make Setup In Lab?
Dec 26, 2012now currently i am working in networking academy. here we are using cisco 2611 and 1761 routers, i want to setup these two routers, i know the all configuring commands,
View 1 Replies View RelatedCisco Routers :: Make 2 Different Subnet Talk In LAN Via Rvs4000?
Nov 18, 2012I have 2 sites located 500 meters away and i connect it via 2 x RVS4000. I managed to get the site to site VPN up Via internet and from my network 192.168.1.x able to reach 192.168.2.x. -where 192.168.1.100 (user try to acces my FTP server 192.168.2.99) has no issues but it's slow due to my internet connection speed.
So i setup another link via wireless( wireless bridge ) purpose is to resolve slow connection via internet.
But some how i try to set traffics divertion from 192.168.1.x to 192.168.2.99 via local LAN faild.
how possible to setup the network such as picture attached with RVS4000?
Cisco Routers :: RV220W - How To Make Successful VPN Connection
Jan 16, 2012I'd like to enable client to router VPN connections. I have a question how to make any sucessful VPN connection to RV220W. From all the tests I made only SSL VPN on Windows XP x86 client machine was working.
For IPSec VPN I always receive this message: [rv220w][IKE] ERROR: Could not find configuration for XXX.XXX.XXX.XXX[500]. I tried with windows and shrewsoft vpn client.
Can't make SSL VPN to work in Windows 7 x64 client because the drivers are not digitally signed. It only works in Windows XP x86 but this is not acceptable. I need universal solution for win clients.
I also need working solution for Android Phone? Router firmware 1.0.3.5. I also tried this step by step guide. No go.
Cisco :: Create A Bash Script To Log Into Routers And Make Config Changes?
Mar 7, 2012I am trying to create a bash script to log into routers and make config changes.I ran into a snag in that I am unable to pass a password for the ssh login.I tried tying an expect script to handle that piece but was unsuccessful.I saw on google something about public/private ssh keys (not the same type used to ssh into the box) but I do not want to go this route.Can this be done in another language other than a bash script?I would like to avoid TCL or EEM if possible, I want to learn a language that I can use for multiple purposes.
View 15 Replies View RelatedCisco Routers :: How To Make Vpn Tunnel Between SA520 And Central UC540
Aug 20, 2011How could i make a vpn tunnel between a router SA520 and a central UC540.
View 3 Replies View RelatedCisco Routers :: Make IPSec VPN Connection From IPhone To RV220W
Aug 22, 2011i have try to make a IPSec VPN Connection from my iPhone to my RV220W.
On the iPhone i get the message "The VPN Server was not found".
It is possible to make a IPSec Connection or only a PPTP ?
Cisco Routers :: 887VA Cannot Expect Client To Make Change Every-time
May 16, 2013I have a curious issue on a customer site where the above components are installed.The issue being that the iPhones the users utilise cannot connect to the mail server via WiFi, they are forced to connect with their 3G connection. The core issue seems to be the 887VA, as when I've installed 'lesser' branded ADSL routers, the connection seems to be fine.The iPhones are set to access the mail server via the URL: mail.customer.com. Should I change this to the internal IP of the server 192.168.12.200, the mail connection works fine. However I cannot expect the client to make this change every time they arrive or leave the office. Presently I have them disable WiFi when on premises.
View 1 Replies View RelatedCisco Routers :: RVS4000 / How To Make External IP Point To Internal Address
Nov 29, 2011Basically I have a group of static public IPs and I need one of them to point to an internal server IP address. This is for the RVS4000 router.
View 3 Replies View RelatedCisco Routers :: 3389 Couldn't Make Inbound Access Rule Work For RDP
Apr 18, 20121. I could not make an inbound access rule work for RDP. It is configured as follows WAN -> LAN for RDP (TCP 3389) , it didn't work even when I chose "All Traffic".
2. Single Port Forwarding seems to be working though.
3. Destination IP and QoS settings seem to be grayed out, I would like to know why.
Cisco Firewall :: 5515x Apply On Firewall / Switches To Make Implementation Successful
Apr 22, 2013I will be implementing a new firewall (cisco asa 5515x) on my existing 3750x (server switches) and my 2960s (user switches). What should I need to apply on my firewall and swtiches to make the implementation successfull. I will put my 3750x as my DMZ and my 2960s as my inside. The 3750x have multiple subnet and also the 2960s.which features and technologies i need to know on those 3 products. my 3750x and 2960s don't have any ACL defined and most common features are vlan, switchport, trunking, spanning-tree, stacking, vtp.how my asa knows that my 3750x/2960s have multiple vlans. my current connection right now on 3750x and 2960s is just through 6 ports i assigned as one trunk, below is my config [code]
my 2960s vlans are almost the same with my 3750x except vlan 160, 170, 192. but of course when i put this in asa, i have to segragate vlan for 3750x (192, 100, 110,160, 170) and 2960s (130, 150). for my 2960s connection to the asa and since this will have big bandwidth, i will use 3 ports on my asa (and trunk it) connecting to my 2960s and i will use 2 ports on my asa (and trunk it) connecting to my 3750x. the one internet ports and my one management ports on my asa will stay like that.
Routers / Switches :: Setup An Home Network With A Wireless Router And Use Multiple Switches?
Jan 29, 2011I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies View RelatedRouters / Switches :: Connect 2 Subnets With Two Switches And One Router Using SIM Software?
Apr 23, 2011how to connect two subnets with two switches and one router using router sim software?
View 1 Replies View RelatedRouters / Switches :: Daisy Chain 3 Switches And Not Have Ip Conflict?
Jan 31, 2011Is it possible to daisy chain 3 switches and not have ip conflict? I am running a public access network for a library. For certain library software I need for all workstations to see each other. I have 25 workstations in total and two separate management consoles. I have all workstations on two switches but one of the management consoles is on the third switch because when joined with the others it has an ip conflict. I need this console for the digital sender that is connected as well as to act as a server for go print software.
View 3 Replies View RelatedRouters / Switches :: How To Check Broadcast On Switches
Apr 26, 2011how to check and trouble shot broadcast issues on network
View 1 Replies View RelatedRouters / Switches :: Smurf Attacks On Belkin Wireless Routers Reply?
Jan 2, 2013If your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.
View 6 Replies View RelatedRouters / Switches :: Transfer WAN From Radio Receiver Through Chain Of Routers
May 24, 2012For my work I am looking to create wireless capabilities to remote locations. To do this we are using a standard modem/router that is connected to an Engenius (802.11b/g) wireless outdoor radio connected to a dish antenna. We are able to go to locations (3+km) and then with a corresponding receiving antenna (using LoS), receive the Internet and connect both to computers at the transmitting point as well as to the WWW. The problem exists is that we want to employ a series of routers at the receiving end that would be able to carry the transmission to a different location (relatively close), due to the fact that some of the locations do not have line of sight to the antennas. We are using Encore routers, model # ENHWI-N3. When we connect the radio's Ethernet into the routers WAN reciever, we can connect to the Internet with a computer. The problem exists is we want to pass that connection over to a second router (R2). This connection is done when the routers are on access points set to a WDS function with R1 having R2's mac address and vice versa. Both routers are set to channel 1. Even when the routers are seperated by distances >50m a computer plugged into R2 can see a computer plugged into R1. Files can be transferred between the 2 computers wirelessly at speed around 3 mbps. However computer 2 on R2 can not connect to the WWW. This router features a spot that lights up if it has Internet access and R1's is lit up but R2's is not. How do we transfer the Internet and not just a LAN from R1 to R2 so it can be accessed further away from the point of the radio and antenna equipment. This setup has also been used where R2 is hardwired to R3. At R3 we change the channel to 11, and then connect through that with mac addresses wirelessly to 4th router. If comp is in R4 and far away it can still access and file share from comp at R1.*edit the ip address for the routers exist all on 192.168.1.xxx If the 3rd number is different between routers would this make a difference?
View 1 Replies View RelatedRouters / Switches :: D-Link And Linksys Routers Plus Modem Connection
May 26, 2011everything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.
View 1 Replies View RelatedRouters / Switches :: How To Install Two Wireless Routers In Series
Dec 31, 2012The first router is wired to the DSL modem and works just fine as an access point with Internet access. The second router is wired from the first router using one of the 4 ports on both router hubs. The second router is visible but has no Internet. How to configure the second router regarding DHCP, LAN, WAN, DNS etc.
View 3 Replies View RelatedRouters / Switches :: Change Two Old DLink Routers To Repeaters
Nov 28, 2011What are procedures to deactivate di-604+di-704 routers+make the repeaters,connecting each of them,in a wired fashion,to my Belkin wireless N router?
View 1 Replies View RelatedRouters / Switches :: Install 3 Routers In One Location With Same Password?
Mar 10, 2012how to installs 3 router with same password
View 2 Replies View Related