Cisco 2611 And 1761 Routers - Make Setup In Lab?
Dec 26, 2012now currently i am working in networking academy. here we are using cisco 2611 and 1761 routers, i want to setup these two routers, i know the all configuring commands,
View 1 Repliesnow currently i am working in networking academy. here we are using cisco 2611 and 1761 routers, i want to setup these two routers, i know the all configuring commands,
View 1 RepliesIm trying to make a ACE+caching setup work. Ace is running A5(1.2)Content types considered static (like images, stylesheets and javascripts) should be fetched from caches instead of servers.Content from the caches that can be compressed should be compressed by the ACE (stylesheets and javascripts).I am classifying traffic into * static, not compressable (content should be fetched from caches but is already compressed - this class will hold .jpg, .gif, .png, .ico and others - but for this experiment the class is defined with only (a never to be hit) content type .xico* static, compressable (content should be fetched from caches but can be compressed by the ACE - this class will hold .css and .js but for this experiment is defined only with (never to be hit) content types .xjs and .xcssother For statistics purpose I have included a catch all class for everything else (which shold be send to servers) - class-default is configured but will not be hit in this example because of the catch-all class I configured.Since both "STATIC" classes include only content types that has been renamed to content types not used in the real world, I will not expect any hits on those and since WWW.SITENAME.COM:80_STATIC_COMPRESSABLE is the only class configured for compression I expect that nothing will be compressed since there wil be no hits on this class.
This is how it looks in the configuration:
class-map type http loadbalance match-any WWW.SITENAME.COM:80_STATIC_NOT_COMPRESSABLE 10 match http url .*.xico
class-map type http loadbalance match-any WWW.SITENAME.COM:80_STATIC_COMPRESSABLE 10 match http url .*.xjs 20 match http url .*.xcss
class-map type http loadbalance match-any WWW.SITENAME.COM:80_DEFAULT 10 match http url .*
[code]....
Questions are: Why do I see things being compressed when there is only being accounted hits in a compression:off class ?Why does enabling compression in one class (never being hit) cause hits in other clases to be compressed ?
i have a problem with the AP WAP200, i can't make access to web setup. It gives to me the error "Unauthorised" without asks to me user or pass.
I tried to reset the AP and i tried to access with others pc and smatphones but the problem persists.
I have 4 story hotel with 40 rooms, 10 rooms in each floor, i want to setup wifi network to cover all the rooms, what should i do or what instruments to use, is it possible to make user based setup for each room.
View 2 Replies View RelatedI just bought a new wireless router and I currently using my older dlink dir-524 wireless router in my home.eason in buying a new one is because currently the dlink router is in the family room use to be a garage and my wifes imac is in our bedroom the couple rooms down not next door or anything, and the imac and even our smartphones when in our bedroom the connection gets disconnected then reconnected etc etc, basically signal strength is low initially when connected to the router.
View 8 Replies View RelatedI may have recently bought an LG NAS (N1T1) and a SAMSUNG SMT S7800 freesat box. The NAS works well on my home network (using Windows 7 Starter), but when the Samsung box is plugged into the network via the RJ45 jack at the rear, it will see the network (ie, it is visible on the screen) but only down to the degree of a symbol. It will not allow me to browse the network - as I was hoping to use this method of getting my DVD collection (most of which is on the NAS) onto the TV. The TV is also an LG - but does not have a network connection at the back. The question is - do I have to do something in the LG NAS setup to make the network readable. Or could the problem be with the Windows 7 Starter edition.
View 2 Replies View RelatedI have the above router with a WD 1TB HDD plugged into the USB port. Is there anyway I can make this setup into a DLNA media server?
View 1 Replies View Relatedi'm facing a big problem with my access point WAG54G ver 2.0 ,i just bought it from 2 days but i find alot of problems when i start using it ,i have read all the user guide and the quick install to see how to setup the access point and make it work with my adsl.i have configured all things right using PPPOE and putting my user name and password and then save settings then go to the status and press on connect , but it don't connect with me just i find connecting and adsl link : Down and still making connecting and nothing after that and my adsl led is off haven't any colors ,and when i get again to basic setup i found the password that i put it in the ppoe login is too long , not my password i tried to see what is this password and recover the hidden i found it " d6nw5vlx2pc7st9m ".i don't know what is the problem i tried alot of times to change setting and also the same problem.i think that it's a frim ware problem and i tried install a new updated frimware but everytime trying to install it get installing and suddenly stoped and white page appeard and all the access point is stopping and when restart it the ac power.
View 3 Replies View RelatedIs there a way to set up Quick VPN on the RV120W without changing the internal subnet? I have just taken over responsibility for a network and I don't know all of the nooks and crannies yet, so I'd rather not change the internal sub net. I've tried setting up a user then changing the LAN settings afterward, but it automatically removed the VPN user when I did so.
View 1 Replies View RelatedI've just purchased a couple of SRP527W routers. I've been unable to even browse to the default 192.168.15.1 to start my configuration. My local network is 192.168.1.x. At risk of showing my stupidity, what am I doing wrong.
View 5 Replies View Relatedhow can i make 3 computers connected wanly
View 2 Replies View RelatedI have RV042 Router, I'm using only one Internet conection, I'm using IP group like this 192.168.95.x, my DHCP setting use 192.168.95.120 to 192.168.95.240, but in this time I have 245 workstations (may be I will have 25 additionals workstations) and some times I see IP conflict message in my current work stations.
I had read about SUBNET like response about my problem, but I'm not sure about that and how to make subnet with my RV042.
I was given an old Cisco 2611 to screw around with, no idea if it's working or not and no idea if the configs and passwords were wiped. Now my problem is that when I turn it on I don't see any console output at all.
Using 9600 baud, 1 stop bit, 8 data bits, no parity or flow control.
The power LED comes on and the activity light blinks for ~1 - 2 minutes before stopping. If I plug something into one of the Ethernet ports on the back the link light comes on for the port and the activity light occasionally flashes, from DHCP probes or something from my netbook I assume.
I have 2611xm router with 2 fastethernet ports. Now I want to install NM-1FX-TX module. I just want to conform that does 2611 supports NM-1FX-TX module. I am using this device for lab purpose. I am using latest IOS"
View 2 Replies View Relatedi was just wondering if its possible to use a WIC-4ESW with a 2611 non-XM router?
with any IOS versions, i just want to know if its possibly or not.
How can I make sure I'm not being hacked by a jerk neighbor? Until recently his D-Link repeaters IP addresses showed up on my T Mobile tethered connection.
View 3 Replies View RelatedI have a 2 router and each one have separate network with DHCP and IP of the two routers are 10.4.251.1 and 10.4.252.1. I am using linksys WRT54gl router with tomato firmware.how can i make communication between these two networks. I want access files from 10.4.251.x to 10.4.252.x and vice versa.
View 1 Replies View RelatedI have 2 sites located 500 meters away and i connect it via 2 x RVS4000. I managed to get the site to site VPN up Via internet and from my network 192.168.1.x able to reach 192.168.2.x. -where 192.168.1.100 (user try to acces my FTP server 192.168.2.99) has no issues but it's slow due to my internet connection speed.
So i setup another link via wireless( wireless bridge ) purpose is to resolve slow connection via internet.
But some how i try to set traffics divertion from 192.168.1.x to 192.168.2.99 via local LAN faild.
how possible to setup the network such as picture attached with RVS4000?
I'd like to enable client to router VPN connections. I have a question how to make any sucessful VPN connection to RV220W. From all the tests I made only SSL VPN on Windows XP x86 client machine was working.
For IPSec VPN I always receive this message: [rv220w][IKE] ERROR: Could not find configuration for XXX.XXX.XXX.XXX[500]. I tried with windows and shrewsoft vpn client.
Can't make SSL VPN to work in Windows 7 x64 client because the drivers are not digitally signed. It only works in Windows XP x86 but this is not acceptable. I need universal solution for win clients.
I also need working solution for Android Phone? Router firmware 1.0.3.5. I also tried this step by step guide. No go.
A broadband speed test take before the Cisco 2611 shows 25+ Mbps. After the 2611, it drops to under 6. Consistently. The router routes between the local LAN (10.80.0.3) and a remote building across (10.13.0.2) a T1. The ADSL internet connection enters this router and leaves to a Cisco 3550 switch.
View 13 Replies View RelatedI have got cable modem and its output is connected to netgear router n150 wireless router model wnr1000v2.now 3 desktops and one laptop is wired to that router through 4 lan ports. now i need to access internet from all systems.and also make one system as central database so that everyone can share and use all work files.one printer is connected to one system.i also need to print docs from all systems.
View 1 Replies View RelatedCan I have 2 routers and make 2 separate wireless signals? Reason being I need one so that I can keep net blacks for my little brother but I would like my net not to have any restrictions.
View 1 Replies View RelatedI am trying to create a bash script to log into routers and make config changes.I ran into a snag in that I am unable to pass a password for the ssh login.I tried tying an expect script to handle that piece but was unsuccessful.I saw on google something about public/private ssh keys (not the same type used to ssh into the box) but I do not want to go this route.Can this be done in another language other than a bash script?I would like to avoid TCL or EEM if possible, I want to learn a language that I can use for multiple purposes.
View 15 Replies View RelatedHow could i make a vpn tunnel between a router SA520 and a central UC540.
View 3 Replies View Relatedi have try to make a IPSec VPN Connection from my iPhone to my RV220W.
On the iPhone i get the message "The VPN Server was not found".
It is possible to make a IPSec Connection or only a PPTP ?
We have an aging 2611 router that that we need to replace due to the fact that its 10Mb/s Ethernet ports are limiting our internet connectivity throughput (we have a 20Mb/s circuit).
The purpose of the 2611 router was to route traffic from multiple devices connected to a 2950 switch's VLAN X to the internet. Can we achieve this same functionality with only a 3750C-48TS-S switch? Could a static route statement on the 3750 replace the need for the router?
my cisco 2611 series router is showing garbage value at start up and not allowing me to enter in Romon mode I check the bitrate in console .it is 9600/8N till then i am unable to start the router Can you tell me how to change configuration register value without entering in rommon mode
View 6 Replies View RelatedPhase1 is complete, Phase2 isn't coming up...everything has been verified on both sides but we're getting unknown errors.
Aug 17 11:33:15.609 CDT: ISAKMP (0:2): Old State = IKE_QM_READY New State = IKE_QM_I_QM1
Aug 17 11:33:15.609 CDT: ISAKMP (0:2): Input = IKE_MESG_INTERNAL,
[Code].....
i have Cisco 2611 series router it is showing garbage value while start up as 00000000000000000000000200000000000000 and i am unable to log in it Roman mode.
View 1 Replies View RelatedIs it possible to change the firmware on my dl2670 router so i may use my 3g usb stick, as the router does have usb ports?
View 1 Replies View RelatedI have a curious issue on a customer site where the above components are installed.The issue being that the iPhones the users utilise cannot connect to the mail server via WiFi, they are forced to connect with their 3G connection. The core issue seems to be the 887VA, as when I've installed 'lesser' branded ADSL routers, the connection seems to be fine.The iPhones are set to access the mail server via the URL: mail.customer.com. Should I change this to the internal IP of the server 192.168.12.200, the mail connection works fine. However I cannot expect the client to make this change every time they arrive or leave the office. Presently I have them disable WiFi when on premises.
View 1 Replies View RelatedBasically I have a group of static public IPs and I need one of them to point to an internal server IP address. This is for the RVS4000 router.
View 3 Replies View RelatedI'm trying to connect my Cisco lab to the internet. I've configured my 2611 to accept DHCP. I can ping the Linksys E1000 router but can't ping the modem on the other side, and cannot get out to the internet with the PC that's connected to the lab. When I look at the DHCP table in the E1000 the 2611 shows up in the table. I can ping all other computers on the lan, just not the modem to get out to the net.I have the configuration for the 2611. Did I miss something. Is the modem blocking ICMP traffic?
Router#sh run
Building configuration...
Current configuration : 931 bytes
!
version 12.3
service timestamps debug datetime msec
[code].....