Samsung SMT S7800 Freesat Box - LG NAS Setup To Make Network Readable?
Dec 10, 2011
I may have recently bought an LG NAS (N1T1) and a SAMSUNG SMT S7800 freesat box. The NAS works well on my home network (using Windows 7 Starter), but when the Samsung box is plugged into the network via the RJ45 jack at the rear, it will see the network (ie, it is visible on the screen) but only down to the degree of a symbol. It will not allow me to browse the network - as I was hoping to use this method of getting my DVD collection (most of which is on the NAS) onto the TV. The TV is also an LG - but does not have a network connection at the back. The question is - do I have to do something in the LG NAS setup to make the network readable. Or could the problem be with the Windows 7 Starter edition.
View 2 Replies
ADVERTISEMENT
Aug 9, 2012
I have a E1550 with a corrupt config that is acting very wonky lately (shows wrong info in some of the settings and doesn't always save changes). Since it may be the config that is at issue, I don't want to do a backup/resote, rather I plan to do a full factory reset and manully type everything back in.What would be nice is, creating a text based, human readable printout of the config for reference so that I don't have to manually type it all twice (once to save it, once for reentry). PS3 ports, MAC filters, etc. have several entries, and they way the pages are designed it doesn't allow for easy, whole entry, cut and paste.
View 5 Replies
View Related
Dec 26, 2012
now currently i am working in networking academy. here we are using cisco 2611 and 1761 routers, i want to setup these two routers, i know the all configuring commands,
View 1 Replies
View Related
Feb 26, 2011
I have 4 story hotel with 40 rooms, 10 rooms in each floor, i want to setup wifi network to cover all the rooms, what should i do or what instruments to use, is it possible to make user based setup for each room.
View 2 Replies
View Related
Jan 26, 2012
I just bought a new wireless router and I currently using my older dlink dir-524 wireless router in my home.eason in buying a new one is because currently the dlink router is in the family room use to be a garage and my wifes imac is in our bedroom the couple rooms down not next door or anything, and the imac and even our smartphones when in our bedroom the connection gets disconnected then reconnected etc etc, basically signal strength is low initially when connected to the router.
View 8 Replies
View Related
Apr 28, 2011
I have the above router with a WD 1TB HDD plugged into the USB port. Is there anyway I can make this setup into a DLNA media server?
View 1 Replies
View Related
May 19, 2013
Im trying to make a ACE+caching setup work. Ace is running A5(1.2)Content types considered static (like images, stylesheets and javascripts) should be fetched from caches instead of servers.Content from the caches that can be compressed should be compressed by the ACE (stylesheets and javascripts).I am classifying traffic into * static, not compressable (content should be fetched from caches but is already compressed - this class will hold .jpg, .gif, .png, .ico and others - but for this experiment the class is defined with only (a never to be hit) content type .xico* static, compressable (content should be fetched from caches but can be compressed by the ACE - this class will hold .css and .js but for this experiment is defined only with (never to be hit) content types .xjs and .xcssother For statistics purpose I have included a catch all class for everything else (which shold be send to servers) - class-default is configured but will not be hit in this example because of the catch-all class I configured.Since both "STATIC" classes include only content types that has been renamed to content types not used in the real world, I will not expect any hits on those and since WWW.SITENAME.COM:80_STATIC_COMPRESSABLE is the only class configured for compression I expect that nothing will be compressed since there wil be no hits on this class.
This is how it looks in the configuration:
class-map type http loadbalance match-any WWW.SITENAME.COM:80_STATIC_NOT_COMPRESSABLE 10 match http url .*.xico
class-map type http loadbalance match-any WWW.SITENAME.COM:80_STATIC_COMPRESSABLE 10 match http url .*.xjs 20 match http url .*.xcss
class-map type http loadbalance match-any WWW.SITENAME.COM:80_DEFAULT 10 match http url .*
[code]....
Questions are: Why do I see things being compressed when there is only being accounted hits in a compression:off class ?Why does enabling compression in one class (never being hit) cause hits in other clases to be compressed ?
View 1 Replies
View Related
Feb 20, 2013
i have a problem with the AP WAP200, i can't make access to web setup. It gives to me the error "Unauthorised" without asks to me user or pass.
I tried to reset the AP and i tried to access with others pc and smatphones but the problem persists.
View 5 Replies
View Related
Mar 15, 2009
i'm facing a big problem with my access point WAG54G ver 2.0 ,i just bought it from 2 days but i find alot of problems when i start using it ,i have read all the user guide and the quick install to see how to setup the access point and make it work with my adsl.i have configured all things right using PPPOE and putting my user name and password and then save settings then go to the status and press on connect , but it don't connect with me just i find connecting and adsl link : Down and still making connecting and nothing after that and my adsl led is off haven't any colors ,and when i get again to basic setup i found the password that i put it in the ppoe login is too long , not my password i tried to see what is this password and recover the hidden i found it " d6nw5vlx2pc7st9m ".i don't know what is the problem i tried alot of times to change setting and also the same problem.i think that it's a frim ware problem and i tried install a new updated frimware but everytime trying to install it get installing and suddenly stoped and white page appeard and all the access point is stopping and when restart it the ac power.
View 3 Replies
View Related
Jan 24, 2013
I have a Samsung galaxy tab 10.1 and I cant connect to my wifi network. Months ago I was able to connect to it but since I changed the router settings I cant, and now it just says it's out of range. My laptop is still able to connect but the tablet doesn't.
View 2 Replies
View Related
Jan 2, 2013
I have a problem with a samsung laptop. Everytime it connects to the home network it disconnects all the other devices on the network. I have reset router (still same problem). Sometimes it will connect for a while and when a download for updates takes place it will automatically disconnect again.
View 3 Replies
View Related
Feb 2, 2013
My Sasung led smart tv does not have a wireless network option in the settings
View 1 Replies
View Related
Sep 29, 2012
I am trying to connect my Samsung TV to the internet and keep getting a message that says NEtwork setup complete, but cannot connect to the internet. I am wondering, I have 2 network connections, a secure one and unsecure. I don't have the information/password for the secure connection anymore, so I am trying to set my TV up with the unsecure network.
View 1 Replies
View Related
Apr 9, 2012
I have practically NO knowledge of networking! So I've been tearing my hair out trying to get this darn thing sorted but to no avail.So, I've bought a Samsung BD-E5500 blu-ray player which has internet capability either through Ethernet or a Samsung wireless adapter. I am not willing to spend an extra £40-£70 on an adapter and obviously don't relish the idea of running a very long cable to my router upstairs. However the general concensus is that it's possible to take a cable out of the Ethernet and into a wireless AP or router, using it as a bridge to the main wireless router. So I have tried this and failed, of course not having a clue as to what I'm really doing. I have a Netgear ME102 access point which the player can't seem to get on the network with at all and also I have tried using a Belkin F5D7632 wireless router. Now, with the Belkin router the player does say that it can access the network, however it says that it cannot access the internet. The wireless router that I have upstairs is an O2 Wireless Box 3.
View 3 Replies
View Related
Feb 22, 2013
I am unable to connect to my home network over VPN from my Samsung Galaxy S3 phone. I have a Netgear WGR614v01 wireless router. This router has my desktop computer and windows 2012 server plugged into it. The server is a domain controller that has the following roles installed: DHCP, DNS, ADDS, IIS, and Remote Access. My Windows 7 Professional desktop is joined to the domain controller. The wireless router serves my netbook, smartphones, and ipods. They do not authenticate with the DC but do get a DHCP ip address from the server.I have my Samsung Galaxy S3 phone that I'd like to be able to use to VPN into my network. Here is what I have done;Disabled the DHCP service on the router. Setup port forwarding to forward PPTP to my server's static IP address on port 1723.I created a user on my DC for this purpose and enabled the account for network dialup service.I created a DHCP Relay Agent in the Remote Access MMC.I opened up the Remote Access app on the server's firewall.On my phone I setup a 'New VPN Connection...' I use the username/password of the user I created for this purpose. I put in my ip address that I have from my ISP.
View 2 Replies
View Related
Dec 26, 2012
Every device I've tried to connect to my WiFi network have no issues connecting at all, except for, as far as I can tell, Samsung Android phones. My sample set is very small, but both a Samsung Galaxy S3 (both before and after custom ROM install) and a stock Samsung Galaxy Nexus.
I've tried setting a vlan up with no encryption and open authentication, and the phones just halt on "connecting". This issue is both on the 2.4Ghz and 5Ghz Radios.
What is working is various computers with both intel and broadcom adapters, a Brother printer, and a Motorola Droid 3 and Motorola Photon Q. I'm starting to think that it's an issue with the radio in the Samsung phones, but the S3 is 5ghz compatible and the Nexus is only 2.4, so they must have different radios. I'm also pretty sure that it's not software on the phones since the S3 had the same problem with stock ROM and CM 10, and the Nexus is Vanilla Google ROM.
I'm waiting to get a chance to upgrade to the new FW for my aironet 1040, and I'm going to fire up an old 1130AG as well as test with an iphone or ipod when I get the chance; I'd just really like to find out what the heck is going on with these samsung phones.
Current configuration : 13969 bytes
!
! Last configuration change at 10:18:26 MST Sun Dec 23 2012
! NVRAM config last updated at 10:18:26 MST Sun Dec 23 2012
[Code].....
View 15 Replies
View Related
Mar 26, 2013
We have a network configured this way : 192.168.1.1/24 and we reached it's limit, is there any way to extend it having the same scheme and keeping communications between the machines, I've tried 192.168.2.1 but it simply doesn't work.
View 8 Replies
View Related
May 16, 2011
I have a router, networking 2 computers. One of them I wish to set to "ad-hoc" I do not want it accessing the internet.
So, a "wired ad-hoc".
The best discriptsion I have is on a Vista or 7 machine you have the Network map I want to disconect the computer from the internet, and leave it connected to the network.
View 1 Replies
View Related
Jan 15, 2011
I have an HP3505 working fine on my home network, accessible from several machines on Vista and Windows 7. But it won't show up on the network map (on any of the machines), even though my other devices (such as network drives, etc.) do. Maybe it doesn't matter, since it works, but how do I get it to show up?Brad
View 3 Replies
View Related
Dec 20, 2011
I have an internet connection coming into my house. The modem is in the basement along with the desktop computer and the wireless router is wired upstairs where coverage is the greatest. Could some tell me how I would make these connections/ hardware needed to have them all on the same network?
View 1 Replies
View Related
Oct 26, 2011
how can i make a 2 km wirless network for dsl internet. my friend lives 2 km far from my home,he has a dsl connection.but there is no facility of dsl availble to my side.how can we make a wireless network?
View 3 Replies
View Related
Aug 7, 2012
I would like to make a network for my house where my laptop connects to my home wifi and other computers can connect to my laptop and get internet, almost like ad-hoc but i would like it to work with infrastructural devices also i do have some spare routers available.
View 3 Replies
View Related
Feb 7, 2011
I have a desktop and a laptop each using xp. Each is set up to connect to the internet wirelessly, through different networks. I do not wish to disturb those settings.I want to set up a third, ethernet network, linking the desktop and laptop, for file sharing only, no internet.
View 11 Replies
View Related
May 11, 2011
For a while now i have been making netowrk bridges to connect my laptop's wireless router to my ethernet port, and every now and then i delete the bridge and make it again. for some reason, a couple of days ago, while trying to make a bridge my laptop said "an unexpected error occured while trying to configure the network bridge"
[code]...
View 1 Replies
View Related
Sep 25, 2012
My PC connects to internet via LAN(Ethernet based), it has a proxy authentication. I want to share internet from my PC through my wireless adapter.
View 4 Replies
View Related
Mar 17, 2012
How do I make short cut icons for L.A.N. and Wireless Network connection in Windows 7 ? I wish to put them on Windows 7 Desktop or send to Windows 7 Desktop like you can with Windows XP.
View 12 Replies
View Related
Jan 17, 2011
I have two computers sharing files connected by a wired lan via an Ethernet card. Both are using XP home sp2 OS and neither of them had any Internet connection. I wanted to make one of them connect to a wireless printer so I added an Asus USB (wireless) dongle to that machine only.When first used the dongle sprang into life, connected to a wireless router in another part of the building (also mine, but nothing to do with this network) and downloaded a load of MS updates. Whilst an Internet connection was not really needed on that machine I thought 'all well and good', and proceeded to download MS Security Essentials onto that machine only. Once the printer software was installed on that computer it connected normally with the wireless printer and printed-out fine.It was only when I attempted to connect to the other computer via the hard-wired lan that I found that the connection between them was broken.
View 8 Replies
View Related
Apr 7, 2013
how to make a wireless router work on a lan network, where my ISP has set the TTL to 1 so i can`t use a router.
View 3 Replies
View Related
Aug 20, 2012
i live in a dorm and i want to stream movies to my nexus 7 but i dont want to buy a nas. can i connect my external to a router [URL] and use that to stream movies. i dont need to be able to connect to it all over campus (i know that involves hacking the proxy) but mainly in my room would be nice.
View 2 Replies
View Related
May 7, 2013
With RV082, I need to make a wireless network bridge, what material should I use for a short distance outside - 100m.
View 4 Replies
View Related
Jul 13, 2012
Canon T3i hooked up to a laptop running ExtraWebcam and Yawcam.Yawcam running an HTML and Stream output to the network/web.I would like people to be able to access that video from the [the internet + network or internet or network] (those are the options/possibilities and the order in which I'd prefer).I am able to get people to access it via the network, but not the net. I'm using my Samsung Galaxy SIII on Sprint to tether (obviously not tethering if I'm only going to the network). Unfortunately, not only can I not access the stream via the internet, I can't even ping the phone.I'm pretty sure I need to open up/forward some ports, but I understand that that's not possible seeing as it's Sprint's network and not mine.
I will also have access to a local wifi network if there's a way to 'piggyback' off of that for web access to the stream even if I don't have access to the router control panel. I'm not sure if I'll have a hard wire connection to a router or not. I can, however, change the ports that the stream is set to.(also, I can bring a separate wireless router to connect to my tethered computer to open up the internet enabled stream to the network?)Given a laptop with a wifi card, a phone that can tether, a wifi network, and, if necessary, an extra wireless router, how can I stream from Yawcam and make it available to the internet if I DON'T have access to the wifi network's port forwarding? Note that I CAN edit the ports in Yawcam.
View 1 Replies
View Related
May 28, 2011
I had an old G router that had an unsecured network. It died and I replaced it with an N router and installed a secured network. I have a cable modem with wires that goes to the router. From the router, I have CAT 4 wires going to several access points around the house. Into one of these acess points, I have pluged in a wireless access point that broadcasts wirelessly---unfortunately, it is broadcasting the old unsecured network. How can I make the wireless access point broadcast the new secured N network?
View 6 Replies
View Related
May 3, 2012
I have the E4200. I have two networks, a 2.4 for internet, and a 5gHz for media. I want to have a wired connection to the 5gHz network as some of the media is on my PC. However, it seems I can only have a wired connection to the 2.4gHz network. Is there any way to do this?
View 3 Replies
View Related
