Make A Wireless And Wired Network Work Together?
Jan 17, 2011
I have two computers sharing files connected by a wired lan via an Ethernet card. Both are using XP home sp2 OS and neither of them had any Internet connection. I wanted to make one of them connect to a wireless printer so I added an Asus USB (wireless) dongle to that machine only.When first used the dongle sprang into life, connected to a wireless router in another part of the building (also mine, but nothing to do with this network) and downloaded a load of MS updates. Whilst an Internet connection was not really needed on that machine I thought 'all well and good', and proceeded to download MS Security Essentials onto that machine only. Once the printer software was installed on that computer it connected normally with the wireless printer and printed-out fine.It was only when I attempted to connect to the other computer via the hard-wired lan that I found that the connection between them was broken.
View 8 Replies
ADVERTISEMENT
Apr 7, 2013
how to make a wireless router work on a lan network, where my ISP has set the TTL to 1 so i can`t use a router.
View 3 Replies
View Related
Apr 19, 2011
I have wired LAN connection from my neighbour's router, and it is connected to my desktop. I somehow got the wireless connection to my laptop from the same place by entering a security number. I got the number through the wired connection as well. It was working perfectly working until recently. Now I cannot access the wireless, whereas my wired connection is working alright. is there any other way to connect this without asking the neghbour?
View 2 Replies
View Related
Jul 12, 2013
I have an Inspiron 570 desktop that has worked fine for at least 6 months since the warranty expired...we had a power surge last week while I was gone and when I returned I was unable to get the wired network to work. I ran the diagnostics and it said that my cable was not plugged in...it was. I rebooted, reseated cables, etc. with no luck. I reset the cable modem and router, reseated cables, rebooted, etc with no luck. I plugged the cable into a laptop and it worked fine.
The diagnostics tools on the desktop indicate there are no issues with the network adapter and that it is allegedly working fine. What I have noticed is that the light indicators on the RJ45 jack on the back are steady state yellow and orange, regardless of whether there is a cable plugged into it.
View 1 Replies
View Related
Feb 11, 2013
Im having a issue with that any of my computers without a wireless connection have been incapable of getting out on the internet with the new router that i got myself, i know the cables works etc, since they work perfectly fine with the old modem alone, but wont work at all with this unless on a computer with wireless connection
View 5 Replies
View Related
Aug 8, 2012
First time VPN newbie. I need to set up vpn for a friends small business using RV082 so, as a test, I set it up here at my home using a very basic config. The network topology looks like:
cloud => cable modem => RV082 => DIR655 => win7 PC
At a remote site, I fire up QUICKVPN, enter necessary data and successfully connect. Bring up Remote Desktop and put in the IP of my home pc and the logon username and, after a minute or two, it says "unable to connect to the computer" (or words to that effect). My home PC has been configured to allow remote desktop connections and this has occured in the past but not since the RV082 installation. There is nothing in the PC's logs nor in the RV082's logs.
View 1 Replies
View Related
Oct 13, 2011
I have a client that is using a DIR-655 router. He uses Cisco VPN to access his work PC. At first, the only way we could get this to work was by skipping the router and plugging directly in to the modem. This is not ideal - so after receiving no response here to this question - I did the following - I put his PC (by IP) in a DMZ. This has done the trick - but will only work until the next time his IP address changes.
View 8 Replies
View Related
Apr 3, 2011
I tried to set up a wireless router yesterday and when trying to connect with my laptop it had limited or no connectivity. I tried a few things but I couldn't get it to work so i switched back to my wired connection. Trying to set up the wireless router is not my concern though at the moment. Now my desktop can connect to the internet but my laptop and ps3 can not obtain an ip address. My desktop does not have a wireless card, thats the only thing I can think of why it will work when the other devices dont.
Right now I have my cable modem hooked up to a D-Link switch with my desktop and laptop connected. The desktop can connect and I get a limited or no activity with my laptop. I have reset the modem multiple times, restarted computers, Right clicked on my connection and tried to repair it, connect the laptop straight to the modem and did all of the above again. The IP and DNS are set to obtain automatically. Nothing is working that I know of but I can plug in my desktop and its up and going in 2 seconds.
The router was a very old one given to me from a friend. Its a Linksys V1. It is not connect to anything or even on now. The last time I tried to use this router I didn't get it to work and this same thing happened. I took it into work the next day and they were able to connect via wireless and wired using my D-Link switch. When I got home it work again just fine.
View 14 Replies
View Related
Feb 27, 2012
Just 2 days ago I realized that the wired connection will not let me connect to the internet at all. However, I have a wireless connection and it lets me connect to the internet. I don't like using the wireless connection unless necessary. I tried updating the drivers and troubleshooting, and it still won't connect. It still has that exclamation mark for the wired connection. I use a Windows 7 laptop.
View 17 Replies
View Related
Oct 22, 2011
I have an older PC with windows 98 running. I used to have it connected to a modem and a router to get internet access.I recently got a new modem as the old one died and have now Wi-Fi in my home. My newer PC takes advantage of the Wi-Fi but my old PC does not.The new modem does not have a connection for the blue cable (Marked USB in back of modem) that was connecting the old PC to the internet.After reading online I think I need a USB wireless adapter but I am not sure on what I need exactly as my online searches return too much stuff (I went on Ebay).
View 3 Replies
View Related
Nov 16, 2011
i have an old hp ipaq pocket pc (really old) but a long time ago i used to have it set up wirelesly to the internet via a D-link DCF-650 W cf card. But i can't get it to find and wireless connects. The card lights aren't flashing there just on they used to flash when I would send or receive data. I can hook to internet through my computer but i want it wireless. I found some drivers for card that i installed through win7 on computer, but how do i make it install to my pocket pc where the card is at?
View 2 Replies
View Related
Nov 10, 2011
How can I make a device or an IP go through a certain WAN? Basically I want to make the PC I use on the network go through WAN2, I have tried everything but I am really stumped on how to do this, my Firmware Version: v4.0.2.08-tm
View 1 Replies
View Related
Nov 26, 2012
It seems like my internet connection constantly disconnects and I have to restart my computer to get it to work again. I don't think its the internet connection because I've lived in 4 different apartments and this has happened. I'm having to restart my computer at least 4 times a day.Another thing I wanted to add is that it especially happens when I do something that is 'internet intensive' such as youtube or when I am using skype or msn video call.
View 1 Replies
View Related
May 11, 2011
Last night I was just online in my dorm using wired internet like I always do and it suddenly just stopped working. It hasn't been working since and it won't connect to anything. However my wifi internet works just fine but I'd like to use wired again for faster speed. I run windows 7 on an Acer laptop.
View 3 Replies
View Related
Feb 1, 2012
Is it possible to change the firmware on my dl2670 router so i may use my 3g usb stick, as the router does have usb ports?
View 1 Replies
View Related
Sep 4, 2012
make dlink dsl router 2640T to be working as repeater which will be able to receive wifi signals. I've seen one guy using the same dlink dsl-2640T as wifi signal repeater where he was successfully able to receive wifi signals[CODE]
View 5 Replies
View Related
Dec 22, 2012
I have DSL on my computer which runs windows 7, using verizon's Westell model 7500. My wife's desktop computer in another room runs windows XP. I purchased a new Linksys USB adapter model N600 which includes an installation disk for her computer. My question: How do I get them to work together so she also has internet connection for her email, etc???
View 2 Replies
View Related
Feb 1, 2013
Region : Peru
Model : TL-MR3040
Hardware Version : V1Firmware Version : latest
ISP : Movistar
Is there any chance to make work HUAWEI E303C with MR3040?I know this model is not in the compatibility list, but when I try connect this modem with the router, it can be identified but it cant be connected. On the logs it appears that there is a problem with dial, APN, but I'm sure I'm introducing the correct values?
View 1 Replies
View Related
May 19, 2013
Im trying to make a ACE+caching setup work. Ace is running A5(1.2)Content types considered static (like images, stylesheets and javascripts) should be fetched from caches instead of servers.Content from the caches that can be compressed should be compressed by the ACE (stylesheets and javascripts).I am classifying traffic into * static, not compressable (content should be fetched from caches but is already compressed - this class will hold .jpg, .gif, .png, .ico and others - but for this experiment the class is defined with only (a never to be hit) content type .xico* static, compressable (content should be fetched from caches but can be compressed by the ACE - this class will hold .css and .js but for this experiment is defined only with (never to be hit) content types .xjs and .xcssother For statistics purpose I have included a catch all class for everything else (which shold be send to servers) - class-default is configured but will not be hit in this example because of the catch-all class I configured.Since both "STATIC" classes include only content types that has been renamed to content types not used in the real world, I will not expect any hits on those and since WWW.SITENAME.COM:80_STATIC_COMPRESSABLE is the only class configured for compression I expect that nothing will be compressed since there wil be no hits on this class.
This is how it looks in the configuration:
class-map type http loadbalance match-any WWW.SITENAME.COM:80_STATIC_NOT_COMPRESSABLE 10 match http url .*.xico
class-map type http loadbalance match-any WWW.SITENAME.COM:80_STATIC_COMPRESSABLE 10 match http url .*.xjs 20 match http url .*.xcss
class-map type http loadbalance match-any WWW.SITENAME.COM:80_DEFAULT 10 match http url .*
[code]....
Questions are: Why do I see things being compressed when there is only being accounted hits in a compression:off class ?Why does enabling compression in one class (never being hit) cause hits in other clases to be compressed ?
View 1 Replies
View Related
Jul 14, 2011
I'm trying to fix the network at a student housing building and the system is kind of a mess. We bought a new E4200 to replace our old Linksys router which no one knows the admin pw to. We have four switches for 50 connections throughout the four story house and when switching the connections over to the new E4200 all of the wired connections no longer work. Switch back to the old router and presto. How do I need to change the settings with the E4200 to get it to work?
Also, as it's a thick old house the E4200's wireless only covers maybe half of it...I purchased two wireless repeaters to put on the 3rd and 4th floors, are these simple to install with the router?
View 4 Replies
View Related
Aug 24, 2011
Is there any way I can make the cisco 857 router work on ADSL over ISDN?
View 2 Replies
View Related
Mar 15, 2009
i'm facing a big problem with my access point WAG54G ver 2.0 ,i just bought it from 2 days but i find alot of problems when i start using it ,i have read all the user guide and the quick install to see how to setup the access point and make it work with my adsl.i have configured all things right using PPPOE and putting my user name and password and then save settings then go to the status and press on connect , but it don't connect with me just i find connecting and adsl link : Down and still making connecting and nothing after that and my adsl led is off haven't any colors ,and when i get again to basic setup i found the password that i put it in the ppoe login is too long , not my password i tried to see what is this password and recover the hidden i found it " d6nw5vlx2pc7st9m ".i don't know what is the problem i tried alot of times to change setting and also the same problem.i think that it's a frim ware problem and i tried install a new updated frimware but everytime trying to install it get installing and suddenly stoped and white page appeard and all the access point is stopping and when restart it the ac power.
View 3 Replies
View Related
Apr 18, 2012
1. I could not make an inbound access rule work for RDP. It is configured as follows WAN -> LAN for RDP (TCP 3389) , it didn't work even when I chose "All Traffic".
2. Single Port Forwarding seems to be working though.
3. Destination IP and QoS settings seem to be grayed out, I would like to know why.
View 2 Replies
View Related
Aug 23, 2012
I have gone through the docs in creating a static NAT. I have gone into firewall/NAT Rules and set the internal / external entries, set access rules for the various services. However, I am unable to make a connection remotely. Somewhere along the line, I must be missing a command or something.
ASA ver: 8.4(4)
ASDM ver: 6.4(9)
View 1 Replies
View Related
Mar 11, 2013
I tried restarting the router and the computer, but to no avail. I've also tried with another ethernet cable and tried several ports, but that did not work, either. What is interesting is that other computers in the household connect to the router via wire without problems. I suppose that means something's wrong with my computer, however, I do not know what. I have a netgear router which says "N300 Wireless ADSL2+ Modem Router DGN2200v3" on the back. My computer has Windows 7 Home Premium installed. I'm using a DSL connection, and Avast! antivirus.
View 7 Replies
View Related
Oct 26, 2011
how can i make a 2 km wirless network for dsl internet. my friend lives 2 km far from my home,he has a dsl connection.but there is no facility of dsl availble to my side.how can we make a wireless network?
View 3 Replies
View Related
Sep 25, 2012
My PC connects to internet via LAN(Ethernet based), it has a proxy authentication. I want to share internet from my PC through my wireless adapter.
View 4 Replies
View Related
Mar 17, 2012
How do I make short cut icons for L.A.N. and Wireless Network connection in Windows 7 ? I wish to put them on Windows 7 Desktop or send to Windows 7 Desktop like you can with Windows XP.
View 12 Replies
View Related
May 7, 2013
With RV082, I need to make a wireless network bridge, what material should I use for a short distance outside - 100m.
View 4 Replies
View Related
Aug 4, 2011
My wireless internet works fine, but its slower (or i assume) than wired. When i first got my comp, i didn't have the money for a long ethernet cable, so my friend gave me his wireless adaptor. I've been wanting to switch as i now have a cable that connects to my xbox from my router and i can switch from xbox to computer, but when i plug it in and undo the wireless adaptor my computer doesn't register that there is any internet at all. My wired internet won't work and i have no idea why.
View 1 Replies
View Related
May 28, 2011
I had an old G router that had an unsecured network. It died and I replaced it with an N router and installed a secured network. I have a cable modem with wires that goes to the router. From the router, I have CAT 4 wires going to several access points around the house. Into one of these acess points, I have pluged in a wireless access point that broadcasts wirelessly---unfortunately, it is broadcasting the old unsecured network. How can I make the wireless access point broadcast the new secured N network?
View 6 Replies
View Related
May 3, 2012
I have the E4200. I have two networks, a 2.4 for internet, and a 5gHz for media. I want to have a wired connection to the 5gHz network as some of the media is on my PC. However, it seems I can only have a wired connection to the 2.4gHz network. Is there any way to do this?
View 3 Replies
View Related
Aug 21, 2011
I have two disk tops I want to network to the internet. Does any one know of a "Wired Router" that will work with Windows Seven and XP?
View 2 Replies
View Related
