For a while now i have been making netowrk bridges to connect my laptop's wireless router to my ethernet port, and every now and then i delete the bridge and make it again. for some reason, a couple of days ago, while trying to make a bridge my laptop said "an unexpected error occured while trying to configure the network bridge"
[code]...
I would like to make a network for my house where my laptop connects to my home wifi and other computers can connect to my laptop and get internet, almost like ad-hoc but i would like it to work with infrastructural devices also i do have some spare routers available.
View 3 Replies View RelatedI have a setup where - I have a cisco stack (4X SGE2010 Switches) trunking over to a 3COM switch. Both switches believe to be the "ROOT" of the network. Note The 3COM is running RSTP as opposed to the Cisco Stack which is running normal STP. To my understanding of STP - Essentially STP is not functioning! Both switches believe to be the "ROOT" so they don't shut ports down. (We are currently having major issues with ports going up and down for seconds at a time on both switches)
View 3 Replies View RelatedI have an Asus 1001 PG netbook. I am having problems with my home wifi network. When I turn on my laptop, I do not receive the signal for our home wifi network. However, I know that the network is working because other laptops at home are able to detect it. I don't think there is anything wrong with the laptop because I can still detect other wifi networks in our neighborhood. The problem only seems to be with our home wifi network. If I restart the computer, the problem is usually solved. This is not an efficient solution for me as I am used to turning my laptop off on hibernate and I don't like having to reopen all my documents.
View 1 Replies View RelatedI am unable to connect my laptop hp to WiFi network.
View 1 Replies View RelatedI stumbled upon a problem which i cannot resolve, the situation is as folows:
A router (Netgear wgt624v3) is connected to the internet. My smartphone and every other wireless device I tested is able to connect to it but not my laptop. My laptop is able to connect to any other wireless network. I can however get acces to the web using an ethernet cable plugged into the router.
I already installed the newest driver for my wireless network card (Atheros AR5B93 Wireless Network Adapter) and I already upgraded the router to the newest firmware. I also disabled every security including the built in firewall. The strangest thing is that I can actually find the SSID of the network, I just cannot connect to it.
FYI: I use windows 7 64bit, laptop type is Packard Bell LM86
I'm having an HP laptop with windows 7 installed on it, but cannot view available wireless network. under network and settings i can see the wireless network card, which means the wireless drivers has been installed. but can't view my wireless network but other computers are viewing my wireless network.
View 1 Replies View Related12 hours ago, my laptop connected to my home's wireless network, no problem. The only event between then and the next time I logged in was that the ethernet cable was unplugged from the router, to be plugged directly into the Xbox. After it was reconnected, my laptop was recieving the signal, and the other home computers connect to internet just fine, but the laptop is locked out of the network. Error message when I click Connect:"Unable to acquire an IP address while connecting to Wi-Fi. Please check your settings and contact the system administrator if the problem persists."I have already tried restarting the computer, the modem, and the router. I do not want to reset the modem to factory settings.
View 1 Replies View RelatedI provide support for a small business network. ISP: Silo Wireless (wireless point to point with ISP) Router: Cisco RV220W Wireless-N Network Security Firewall
The router is configured with two wireless access points with SSIDs: "abracadabra" and "abracadabra-guest". The only difference between these two wireless networks is their passcode. Up until now I have had no problem connecting devices to either wireless network.
My problem lies with an HP Pavilion laptop running Windows Vista Home Premium 32-bit that I'm trying to connect to the "abracadabra" wireless network.
Network and Sharing Center shows "Identifying" for a while and then shows "Unidentified network" with no local or internet access. Wireless network connection status says that Media State is Enabled, Speed is 54Mbps and Signal Quality is Excellent. Network Connection Details shows that DHCP is Enabled but it's getting an Autoconfiguration IPv4 address of 169.254.107.138...
The laptop is running ESET Nod 32 Antivirus 5 and Windows Firewall and I've disabled Windows Firewall on the Wireless Network Connection. I've also tried re-installing the wireless nic driver, it's running the latest from Windows Updates.
what really gets me is that the laptop can connect to "abracadabra-guest" fine and access the internet
This was for a WRT160n v3.0.02 I looked up several suggestions online and decided to update the firmware to v3.0.03 This seemed to only make it worse as I could no longer connect, and when I turned the router off and back on it would allow me in for about a minute and drop me right away.I started tweaking with the settings, and came across some posts here such as this one, started tweaking with the channel settings and everything. Nothing. If anything I somehow made it worse since now instead of dropping repeatedly it wouldn't connect at all except for about a minute after restarting router, then it would drop completely (I would either get the limited access notification or I simply couldn't connect and windows said to unplug the access point. I recalled I had another Linksys router that I wasn't using in storage, a WRT54G2v 1.0.01 so I set that up, no problems... at first. All other devices picked it up right away, but once again, my new laptop decides it's too good for the freaking network and drops it repeatedly telling me there's a problem with the access point.
So at this point I'm thinking it might NOT be my network, but my wireless card or something, I uninstalled and reinstalled, updated drivers, (I use a Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC) I even came across this article and disabled browser service and NETBios (including all other devices on my network). It brought back the network on my laptop for a bit, only to smugly come crashing down again.
I have Inspiron 1525 with Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller. After reformat, the network will not detect wireless modem after I think I have downloaded all pertinent drivers. In Device Manager, under Other Devices, The Network Controller shows an exclamation mark that under Device Status says, "The drivers for this device are not installed. (Code 28) To reinstall the drivers for this device, click Reinstall Driver." I have turned on the button on the left of the laptop and still missing something.Prior to the reformat everything was working well. I had the Blue Screen of death andthat's the reason for the reformat.
View 15 Replies View Relatedcan i make my lap top a wifi extender/repeater?
View 2 Replies View RelatedW7. Internet connection is through BT Home Hub2 and is hardwired. No problem at all. But my wireless connected BT internet radio and my wife's Kindle can no longer connect to the internet. The radio says connecting to network but does nothing. I have changed nothing I am aware of. I have looked at the BT Home Hub Wireless set up page and the settings are Using WPA and WPA2 and the correct wireless encryption key is there. Channel selection is automatic. I have changed that to 3 other suggested channels, no result. Frankly it is all Greek to me and I do not know what I am looking at. how I reconnect the Kindle by wireless and the internet radio? (I know I can use a USB to connect the Kindle, but not the radio).
View 1 Replies View RelatedWhen I'm trying to make backup in ACS5.1(in log collector node) it gives me the following error:
FullBackupOnDemand-Job Incremental Backup Utility System Wed Jul 13 16:50:23 EEST 2011 Incremental Backup Failed: CARS_APP_BACKUP_FAILED : -404 : Application backup error Failed,I did it via Monitoring Configuration -> System Operation -> Removal and Backup and then "Backup now" bottom.
I tried to restart ACS services through cli (application stop/start) and different repositories (ftp, tftp) but without success.
When I'm trying to make backup in ACS5.1(in log collector node) it gives me the following error:
FullBackupOnDemand-Job Incremental Backup Utility System Wed Jul 13 16:50:23 EEST 2011 Incremental Backup Failed: CARS_APP_BACKUP_FAILED : -404 : Application backup error Failed
I did it via Monitoring Configuration -> System Operation -> Removal and Backup and then "Backup now" bottom.
I tried to restart ACS services through cli (application stop/start) and different repositories (ftp, tftp) but without succes.
I have a Linksys Wireless G Model WRT54G2V1 using WEP encryption. I recently added a laptop. It can access various non-decured netowrks. It can see my home network but is unable to connect despite entering the correct passcode. how to get the laptop and secured network to communicate?
View 1 Replies View RelatedWe have a modem at home but it doesn't have built in wifi so we have it connected to a router. We have fast internet (ADSL2 i think) but running through the router, it's very slow. So i was wondering if i could somehow make my laptop a modem? Or a router as well because it would have to be faster than the one we have now. Im running a Acer Aspire 1830 Notebook 32-bit windows simple language when replying
View 1 Replies View RelatedIs there anyway to convert a laptop (with inbuilt wireless device) to a streaming device via wireless connectivity?Essentially I have a desktop and also a laptop in the house. I sometimes want to use my desktop in other places in the house, since my laptop is seriously old, I have most of my work data on my desktop. SO, I thought the idea of being able to use my laptop as a streaming device, acting as a wireless monitor, keyboard and keypad.
View 1 Replies View Relatedi have inspiron n5010 laptop with dell 1501 wireless card.I use a broadband cable connection for internet.is there any way i can make my laptop a wifi device so that i can connect my mobile with internet using wifi
View 3 Replies View Relatedi've got up and running a webportal on my asa 5520 os 8.2.5 and but i can not make the ssh plugin ver ssh-plugin.111006 work, all of the others work well, no matter what web browser i use always fail, I even upgraded to the version ssh-plugin.120911 but with no luck, is there a debug or something that i could use to make it work properly?
View 2 Replies View RelatedI ve just finished setting up my first serial connections between two sites using Cisco 1800 routers. I can make connections from Site A to Site B using Windows XP clients, eg accessing exchange server 2007 running on Windows 2003x64, but the main problem is that when I try to configure Windows 7 clients to connect to exchange server on the other site, I can't make connections , no ping, no ssh , no http. What amuses me more is that I can connect to Windows 2008 servers using both Windows XP and 7.
View 5 Replies View RelatedMy son is trying to make a wireless conection from sony laptop to his sharp tv but the tv wont see his laptop
View 1 Replies View Relatedunable to open 192.168.1.1 in google chrome but can access other net work.
View 1 Replies View RelatedI have AG241v2 LinkSys router. my problem is when I had started to download anything, I found that no internet connection so I couldn't make internet browsing or any other activity. This problem is also occurred when more than one user connect to the internet, the others can't make browsing. I made firmware upgrade but still the problem occurred.
View 6 Replies View Relatedi now learning about SSLVPN, and i already install license in 1941 with SSL and security9 License, i learning how to make a gateway for SSLVPN full tunnel, but i meet an obstacles, when i go to my wan ip address https://wan ip address, the browser give this
SSL connection error Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have.
Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error
[code]...
We have CUCM & lync server setup and its working fine if any one calling each other with DNS load balancing. But customer want ot use Cisco ACE 4710 instead of DNS LB.We have configured Cisco LB and deploy but when CUCM user calling to lync user call going to disconnect after 4 sec and also Lync users unable to make call to CUCM.And also LB deploye between share point but when users are trying to open web session that time web page going to show page cannot display.
[code]....
I have turned on the aaa command authorization without applying adequate privileges to the user. I can now log in through that user but the ASA 5510 displays an error :ASA 5510# show running-config
ERROR: % Invalid input detected at '^' marker.
ERROR: Command authorization failed.
I am unable to make any configuration changes on the firewall. Is there any default user through which I can log in and disable the aaa authorization ? if not, how can I resolve this situation ?
I have gone through the docs in creating a static NAT. I have gone into firewall/NAT Rules and set the internal / external entries, set access rules for the various services. However, I am unable to make a connection remotely. Somewhere along the line, I must be missing a command or something.
ASA ver: 8.4(4)
ASDM ver: 6.4(9)
I am using Solawinds syslog and trying to get our Cisco routers send syslogs to our syslog server. I followed the procedure on Configuring Cisco Devices to Use a Syslog Server from [URL] Our Cisco swtches are all sending syslog messages but not the routers. I compared the config with our access switches but can't seem to find the problem:
Sample router config:
service nagleno service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msec localtime show-timezoneservice timestamps log datetime msec localtime show-timezoneservice password-encryption!hostname WWF-RT1boot-start-markerboot-end-marker!security authentication failure rate 10 logsecurity passwords min-length 8logging buffered 4096logging rate-limit all 10logging console critical!aaa new-model!!
[Code] .......
is there a command that prevents the router from sending the syslog to the server?
One moment the laptop was using the wireless connection from the router in our house and the next it lost internet access and then wasn't able to recognize the SSID or connection at all on the available wireless connections. We have reset the router and restarted the laptop countless times yet the only internet access we have is on the computer the router is hooked up to.The wireless connection works neither on the laptop nor the Wii, both previously works merely hours ago and with no problems until now.We assume there is an issue with the router itself, whether it be a loose ethernet cord (which only faintly can be moved in its place).It's almost as if the router is stopping them (Wii, and laptop) from having access. When we explore the wireless internet properties on the laptop, it shows the wireless connection, yet only there and doesn't give access to it. Could it be the router, or could the company have restricted WiFi only to the computer it is hooked up to?
View 1 Replies View RelatedWe have a network configured this way : 192.168.1.1/24 and we reached it's limit, is there any way to extend it having the same scheme and keeping communications between the machines, I've tried 192.168.2.1 but it simply doesn't work.
View 8 Replies View RelatedI have bridged several w/l Tranzeo's together. I have given each of them an IP address on the same subnet as my gateway and manage the units using that addressOther than for management is the IP address of a bridge used for anything else? I have noticed that I can plug in any gateway address I like and the units are perfectly happy even if the phoney gateway does not exist.
View 1 Replies View RelatedHow do i make my laptop wireless without having to have my laptop connect to all the wires?
View 9 Replies View Related