I got a friends permission to use their wireless internet. I can only connect in a certain spot in the house. I want to connect wirelessly and then share the connection through the ethernet into MY wireless router, and broadcast through my house.
View 2 RepliesI have internet through an ethernet cable. I was trying to use a Thomson ADSL router from O2 to share this ethernet connection wirelessly. I was told this is not possible(can give detail if needed). What is the best and cheapest wireless AP that takes an ethernet input and outputs wireless+ethernet(option) ?I have been looking at LINKYS wrt54g for about 20.
View 8 Replies View RelatedLaptop connects to the internet via its wireless adapter and my wireless router. There are no problems here it's all going fine. My phone and other laptops in the house are all connected to the router with no dramas. I've currently connected my PC (which has no wireless card) to my laptop via Ethernet cable and allowed all the internet sharing settings with the hopes of using the internet on my PC (I've done this successfully in the past but it's not working now for some reason). The LAN network is Unidentified and as such won't let a connection pass from laptop to PC. Used the diagnose function on the LAN network and got this message: "Local Area Connection doesn't have a valid IP configuration".
how when it comes to networking, IP addresses etc isn't all that good but I'm computer-savvy so will be able to follow any instructions. I have access to my routers login and all that if required. A friend of mine mentioned something about DHNC or somesuch but I don't know what all that's about.
Im having a ACT Broadband internet connection, he provides internet connection through a wire which runs into my room that can be directly connected to the my computers NIC. Whenever i switch on my computer and opens the browser it first redirects to the page url... where it asks for Username & Password, our ISP gives us a IP Address which displays on the web page after logging in.I want the internet connection to be shared with my roommates so i bought a 8 port Ethernet switch (url..), which is having a uplink port also. I have connected the wire given by the ISP to the up link port of the switch & i connected my PC to one port of the switch with another network cable. I also connected my friends PC to second port of switch with another network cable, my problem is that when i sign into my ISP web page and start using the internet & my friend also wants internet in his PC & when he opens the browser the ISP's webpage is appearing and when he sign's in internet is disconnecting in my Pc. I tried to change the IP but as a default IP is given by the ISP if change the IP internet is not working.
View 3 Replies View RelatedI'm trying to share my wifi internet from my pc to my old mac ive connected them via ethernet cable, from my understanding the mac has been assigned an ip address, but I can not use the internet on it.
View 1 Replies View RelatedWRT54GL has an option to restrict or share the bandwidth equally to each ethernet port or wireless? I need this option in a low bandwith area because the first computer connected to the router who makes some traffic (e.g. youtube) takes all the bandwith allocated by the ISP. url...
View 1 Replies View RelatedI am getting internet from my neighbor through a usb wireless nic and have enabled ics on that connection. What i would like to do from here is plug a cable from my wired lan to the internet plug on the wireless router to create a wireless network with internet in the house. The problem seems to be that dhcp cannot give the wireless router an ip address
View 2 Replies View Relatedi have a wireless usb to get internet on my windows vista laptop...and i need to share internet with other computer with my wireless router so how i can do it ?
View 7 Replies View RelatedI have that connections and i cant change because is a bussiness network, modem (floor 0) > switch (floor 0) > rack switch (floor 0) > network port (floor 1) > router wireless In others floor they have this config with wireless internet working, but in mine no.
The router model is Linksys WRT160N V2, the IP is 192.168.1.87 and if i connect a PC directly to the network on floor 1 i have working internet.
I'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution
View 4 Replies View RelatedI have a 4G/LTE Sierra Wireless Aircard to provides great internet connection to my Windows 7 laptop.I would like to share that internet connection for other mobile devices (Playbook, iPad, etc.). Can I use my Linksys BEFW11S4 router to share that connection?
View 2 Replies View RelatedI am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router.
So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE?
I am wondering how to share my mac desktop's wifi to an ubuntu 12.04 box via ethernet. I know how to share the internet from the mac but don't know how to connect to it on the ubuntu box. I have made ipv4 connection but internet doesnt work on both.
View 6 Replies View RelatedHow to share internet with one router with pc
View 1 Replies View Relatedhow do i share modem internet with two computers without using a router or switch
View 4 Replies View RelatedI have a CDMA compatible modem which connects to my Desktop PC via USB.it works fine, but I'd like to share my internet connection with another Laptop, Wirelessly via a Router. The router connects to my Pc via Lan cable. I activated Internet Connection Sharing in the properties of my modem and connected it to the Internet.I hoped my Router would detect an Internet connection on My network and would enable internet connectivity on My wireless AP on the Router. But it didnt. is that windows refelcts "internet access" on both the actual Wireless network on my Router ("49 network") , and on both the Physical Connection to my pc via the Ethernet port ("3G Router") my laptop connects to the router, but without access to the internet, and I keep getting an 'unable to resolve host' message in my Browser. Suspecting my Router of somehow causing the problem I also tried setting up an Ad hoc network instead (using my wlan card to interface with the Laptop directly). They connect fine, and my Printers and other shared resources all appear, but the wireless range between them is like bluetooth compared to the great range of my router.& I still cant manage to share an Internet connection between the two machines!
View 9 Replies View RelatedI moved to a new apartment and have to wait a month or even more to get my DSL internet, so I temporarily got myself a USB 3G device to have some access to the internet till I get my DSL line.
The USB acts as 3G modem for a single PC that's connected to it, what I want is to share that internet using my D-Link DIR-655 router so I'd be able to connect my iPhone and PS3 as well.
How to get that setup working as smoothly as possible would be great. DIR-655's default gateway is 192.168.0.1, and the auto DHCP range IIRC is 192.168.0.100 to 192.168.0.199.
Can devices that share a router have access to each others internet history? Can one device affect another device that also uses the router?
View 3 Replies View RelatedI have a Thomson tg782, with a USB port on the side. I want to plug my sub modem internet into that usb port, and then share that connection over wifi, because the router has a wifi function.
View 4 Replies View RelatedI have a set up for cable modem internet i would like to share with a laptop.Its a Motorola surfboard cable modem hooked up to my IBM P4 computer through a USB cable. The Ethernet port out of the modem is NOT operational.The IBM computer gets the internet fine in this configuration. I would like to use a SRX200 WiFi router to connect a laptop to my internet using ICS and leaving the IBM computer and router on when i do this.I opened properties on the USB connection and clicked share internet connection.This then set up my Ethernet port to 192.168.0.1.I now want to connect the SRX 200 to the Ethernet port. Its IP is 192.168.1.1.so, do i connect the computers Ethernet port to one the routers Ethernet ports instead of the wan port?Do i turn off the routers DHCP? Do i have to change the routers IP address to make this work? Will i have to assign fixed IP's to my client to make it work?
View 1 Replies View RelatedHow can I use the dual LAN of my PC to share internet with my notebook? The PC is at school where it uses a static IP and I would like to avoid buying a wireless router for this purpose.
View 3 Replies View RelatedUsb modem to router cisco linksys e900 how to share internet
View 1 Replies View RelatedMy Cisco E3000 has slowed it's Ethernet speed so slow that it times out when going to Facebook, YouTube or any site that is complex. It worked fine until one day it just gave up. It's connected to DSL Modem with Ethernet To a Apple Mac G5 power PC There are two other older macs connected via Ethernet, same problem. When I took the router out of the chain, and connected G5 directly to modem, normal internet speed. My firmware is up to date. Both wireless bands work great. When I look at Cisco Connect, everything looks normal. factory settings.
View 7 Replies View RelatedI have this adsl wireless router but my internet connection only has RJ45 directly connected to my PC. My questions is how can I use my ADSL wireless router with this kind of internet connection.. because I really want to make my connection wireless..
View 1 Replies View Relatedhow can share 3g usb internet connection via lan without router
View 1 Replies View Relatedi would like to share internet from my USB modem purchased from a local mobile communications provider with several other computers. how to achieve this.i will have to purchase a wireless usb router and then attach the internet dongle to it. i need to know what configurations i need to make from there. and can any router work with this usb dongle or is there a specific one that i need to purchase.
View 4 Replies View RelatedI am using a Belkin router with my laptop (Vista). What I would like to do is connect my desktop machine, also Vista to the router. THe Belkin has 4 ethernet ports in addition to the modem port. So far I have been unable to succeed in making a connection. I am going to get a USB adaptor, but am looking for an interem solution
View 3 Replies View RelatedI have an internet connection that enters my house using a CAT5 cable through RJ45 type socket - Currently I have a desktop that is connected to the Cable - I want to share my internet connection - The desktop should have a cable connection and want to connect a laptop as well which will connect using wireless as well as cable as and when required - I will not be using both computers at all times so do not want to make my desktop a server or the laptop a server.
View 3 Replies View RelatedWRT400N worked great for 18 months.
Last week the Verizon-supplied DSL modem went bad (wasn't receiving data) and was replaced.
Now I can get Internet direct out of modem, and when I connect it to router the router's Internet light is on, but it seems to stop there. Devices connected to router via Ethernet or wifi don't get Internet.
I'm able to get to the router's admin console via Ethernet and wifi, but no Internet.
We just built a new shop and are trying to get wireless throughout the whole thing. However the situation is unique.
The internet connection is actually a large area wireless connection. It is provided by DTN. Basically we have a dish type of thing on top the shop that picks up internet from a transmitter about 3 miles away. There is a large cable that goes from the dish into a Cisco 350 Wireless card in the computer.
[URL]
We are given a static IP address from the company which is in the 10.1.x.x range. What my original plan was to use ICS to share the DTN connection to a wireless router that is connected to the LAN port of the host computer. However ICS only works for the 192.168.0.1 ip address. We have to use the 10.1.x.x IP that we were given, that cannot be change. So because of this ICS does not seem like it will not work, unless there is a 3rd party tool that can used.
Also anytime that I enable the LAN port on the computer now that the router is plugged in, the internet drops off. it looks like the computer is defaulting to the LAN connection instead of teh DTN connection (which shows up as a wireless connection to XP). Is there anyway to stop this from happening?
Other notes: Computer: It is a Core2Duo running windows XP Pro.
Also are there any routers that can be purchased that can use a wireless connection input for the LAN connection?
I was very happy working with my WRT610N connected to the ethernetport of my previous internet modem. Recently I had to switch to a new modem CISCO EPC3925. Unfortunately this combination does not work anymore. I don't get an internet connection on my WRT610N anymore. I therefore have to connect all computers (LAN and WIFI) to this EPC3925. Especially for the WIFI I'm not fully happy. My IPAD2 sometimes does not want to connect, a problem which never occurred when connecting to WRT610N.
I probably need to change a setting, but where? In the EPC3925 or in WRT610N?
I have actually made my laptop a hotspot for example i have cable network connected on it or usb internet and i am using connectify software to share internet through wirelesss card it is sharing through wireless card to mobile and other wireless devices.. But only the issue is i want to set bandwidth for every user or default bandwidth rule for every device connect.. connectify showing me every user that connect internet through my laptop but it has no bandwidth setting option is there any solution to set bandwidth as per user or default bandwidth then whoever connect he will get my selected speed.
View 2 Replies View RelatedI have one laptop and a wifi dongle and a router. I want to receive internet on my wireless device of my laptop and want to broadcast or share internet from wifi dongle(TP-LINK).
View 2 Replies View Related