Software To Reduced Speed Of Cybercafe Server

Jan 21, 2013

with SOTFWARE to reduced the speed of my cybercafe server against my client that eat up my bit( reducing the speed of heavy downloading

View 1 Replies


ADVERTISEMENT

Cisco Routers :: RV220W Sudden Reduced Upload Speed To FTP / NAS Server

Apr 22, 2013

In my last thread I had difficulties setting up access to my FTP server through the RV220W router. After getting it to work, I faced a new issue of reduced upload speed. 240ish KB/S which is obviously ridiculously slow.  After much toying around, I finally got it to work again, after doing a factory reset of the router. But today when I wanted to upload to my friends NAS, I suddenly am faced with reduced speeds yet again(400KB/S)!  settings, with one firewall rule added, to allow access to my FTP.  Other than that, I also enabled jumbo frames....so I tried disabling that again. But that did nothing.  Also tried disabling every firewall feature under "attack prevention" but, didn't seem to work either.I didn't reboot the router with each change, as that would make things take a lot longer....and didn't think it should be necessary?
 
I'm starting to get more and more tired of using my RV220W....seems slow and buggy..when I do a online speedtest, I get a 30Mb/30Mb down/upload rating, which matches the rating I pay my ISP for.... And I have a fiber connection.

View 5 Replies View Related

Network Upload Speed Is Randomly Reduced?

Jan 2, 2013

First discovered this problem because I was unable to connect to a particular web site that was functional according to a friend that I was talking to on the telephone while trying to connect.

Problem: Network UPLOAD speed is randomly reduced from 2Mb to 600Kb while download speed seems unaffected (Abt. 30 to 50Mb). First eliminated the router, modem and cables as suspects working with ISP tech support. CAT 5 cabling to router and cable modem. Then I discovered that another machine on the network did not have this problem. I then discovered that disabling the network and re-enabling the network cured the problem.....temporarily. Downloaded and installed latest NIC driver from MB web site. No solution. Downloaded and installed latest NIC driver from Realtek web site. No solution. Updated MB BIOS. No solution.

MB= Asus M5A97 EVO
CPU: AMD FX-4100
OS: MS Windows 7 Professional 64-bit SP1 (Latest updates)
RAM: 8.00 GB Dual-Channel DDR3 @ 802MHz (11-11-11-28
NIC on MB Realtek PCIe GBE

Disabled TCP/IPV6. No solution. I suspect it is one of the "Advanced" settings for the Realtek PCIe GBE, but I don't know what they do. Anytime I disable and re-enable the network adapter my upload speed returns to normal. I haven't been able to isolate a particular action that causes the slow-down. The attached pics show speed test, before and after disable - re-enable network adapter. Same server.

View 9 Replies View Related

Wireless Connection Speed Reduced By Half?

Aug 3, 2012

I noticed my wireless connection was decently fast for my needs which was 13-15 up /5 down. I am in the next room from my study and around <10 ft away from the modem in the study. However today the internet was extremely slow for everyone in the house so I went to reset the modem. After resetting the modem I noticed that the internet speed went a bit up and so I used speedtest.net to see how fast the connection was in the study. The computer in the study is connected with a ethernet cable to the modem. I was amazed that the speed in the study was nearly double the amount. I understand that wireless connections are undoubtedly slower than a wired connection, but is it normal for the speed to drop by half when I am <10 ft away from the modem?

View 1 Replies View Related

Cisco Switching/Routing :: WS-C3560CG-8TC-S / Speed Reduced And Drop Packets With QoS?

Apr 11, 2012

I put a QoS in a  WS-C3560CG-8TC-S  version 12.2(55)EX2.  in our lab file upload or download speed much reduced and drop the packets with QoS everyting is fine without QoS
 
Here is the config: My question is why I speed reduced a lot and packets to be dropped with QoS.everything is fine WITHOUT QoS.

class-map match-any VoIP  description Voice IP Phone RTPmatch access-group 157
class-map match-any WEB  description Internal Web, SSL Web, DNS query, Pinnaclematch access-group 153
!
policy-map QOSMARK
class VoIP  set dscp ef
 class WEB  set dscp cs3

[code]....

View 4 Replies View Related

Belkin - Reduced The Security And YouTube Slowed Down

Mar 21, 2013

Recently I was experiencing communicating with the WIFI I called Belkin and they changed some identity and said they lowering the security. Now I notice a slow down in my You tube viewing it buffers constantly

View 1 Replies View Related

Belkin Reduced Security And YouTube Slowed Down

Apr 20, 2011

I was experiencing communicating with the WIFI I called Belkin and they changed some identity and said they lowering the security. Now I notice a slow down in my You tube viewing it buffers constantly

View 4 Replies View Related

D-Link DIR-655 :: Wireless Signal Greatly Reduced?

Jan 21, 2012

Ok, some time this week the strength of my wireless signal has been greatly degraded.  I have not had any problems connecting to the router in the past at any location in my house.  Now if I am 20 feet away I barely have 1 bar of signal. 

I have tried changing channels, and rebooting the router.  It has not improved. 

View 8 Replies View Related

D-Link DIR-655 :: Wireless Output Reduced Over Time

Nov 23, 2012

I have had a DIR-655 router for a few years now, but slowly over time the wireless output has gone down. I have tried changing parameters to only-g or only-n, rebooted, changed other parameters based on what I have read in some of the forums, but have not been able to restore the power. It has an ANT24-230 antenna, and the latest firmware update 1.35NA. Different devices all show the same thing, that even next to the antenna the strength is only 80% in spite of the fact that the wireless output is set to max.

even though I have been working on this for a couple of months now, and am considering buying a new 11AC or 900N router if this is not fixable.

View 2 Replies View Related

Linksys Wireless Router :: E3000 Range Has Suddenly Reduced

Mar 11, 2012

I have an E3000. I have moved to a new house. Here the router range has suddenly become very short. By very short I mean, it works well within the hall (10 meters), but as soon as I enter another room, it drops and doesn't work behind closed doors or through walls.  Also its next to a staircase, and wont work as I go downstairs and into a room.
 
I tried testing a D-link (N) router, and an Older Linksys (G) router, but all of them seem to be suffering the same problem. My wired connection is performing very well, and this prob is with Wifi only.

View 1 Replies View Related

Cisco Switching/Routing :: 2960 - How Much POE Watts Can Be Reduced On Certain Devices

Jun 21, 2012

I'm getting currently installing a full Valcom IP sound and clock system , along with all new Cisco 2960 gig ps-l switches. All devices run off of POE. In the past, I have read that most AP's only draw approx. 12.5 watts (va's). But you must take into account length of wire to add your additional draw which puts you at the 14.5 they auto draw.  My question being that the clocks I have auto draw 15.4 watts, which is eating up my 370w of power on my switches. The spec sheet on the clocks show only a power consumption of 4.5 watts.  So today I turned a few ports down to 4.5 watts and everything still worked fine.. Any experience by chance with Valcom devices or just turning the power down on devices in general? I can imagine that a clock is drawing enough to care about the length of the wire run.

View 8 Replies View Related

Cisco Switching/Routing :: 3750G - Maximum Throughput Reduced By Stacking Or Any Of Other Features

Mar 21, 2012

We are experiencing output drops on our 3750G-12S (IOS 12.2.55).
 
I have monitored throughput with MRTG, but it doesn't seem that high compared to that the 3750G is supposed to handle 17.8 Mpps.
 
The 3750G's are stacked, running ospf, qos, multicast (IPTV) and etherchannel.Is the maximum throughput reduced by stacking or any of the other features?
 
I don't know if one can estimate what the maximum throughput is per ASIC or per port, but on one of the ASICs that is having drops the peak unicast load is 1.3 Mpps and multicast Mpps is 0.9 Mpps. Total ~2.2 Mpps.
 
This doesn't seem high at all and I don't understand why the drops are appearing. What I can do to find out the reason for these drops?

View 5 Replies View Related

Linksys Wireless Router :: WRT160N - Internet Speeds Reduced After Installing Firmware 2.03 Build 9

Jul 28, 2012

I own the linksys wrt160n v2...It has latest firmware 2.03 build 9...After installing this firmware i have noticed the internet speeds have reduced,the router requires frequent reboots to make it stable.. 
 
i used to have firmware version 2.02 build 15...It was stable unlike the current firmware...i cant find the old firmware anywhere...how do i  revert back to old firmware?
 
All settings are currently at default. 

View 3 Replies View Related

SQL Server Effect On Internet Speed?

Jul 11, 2012

Ok so this morning I found out that I had a running sql server that I did not know of. I think I might of got it with one of my development kits since I program with python, c# and java.Would I have got it from recently installed software.Also a big worry would it affect my internet and usage and will it affect my computers speed.

View 5 Replies View Related

Download Speed Limiting On Server / Switch?

Feb 23, 2012

I am sutdying at uni and in a few months, I will be moving into a house, with my current flatmates. We will be buying a fibre optic line.Ideally,what I want to do, is split the connections evenly,depending on how many people are online current, rather than having mass downloads of everyone at the same time, when other will only get a small speed while browsing or gaming,or streaming,etc.So, basically, what I want to do is split the connection at anyone time evenly,so if there are 5 people connected and our connection speed is 50MB then each will get 10MB. And if 2 people are connected, then the speed will be 25MB each, and so on.

I am wondering what is the cheapest way of doing this? I am very computer illerate,I know how to use unix systems.I even own my own server, but I'm not so clued up in this area of networking.I believe it's something to do with a switch, and which switches support this? (I've heard it's something to do with full-duplex / half duplex).

- I will probably set up a domain system, where everyone has to login to the main server to access the internet. (I know vaguely how to do that) - is there some software that I can put on the server which will distribute connection speeds automatically.

View 6 Replies View Related

Broadband :: Download And Upload Speed For Server Of Many People

Feb 2, 2012

What would be the ideal download and upload speed for a server of more than 50 people ?

View 1 Replies View Related

Netgear DG470N - High Speed Switch For Media Server?

Feb 24, 2013

I have a Netgear DG470N gigabit modem and I am streaming 1080P films from a 2TB networked hard drive onto a LG 42inch Smart TV viat wired ethernet. Sometimes the films crash and the TV cannot reopen the network folder with the film in until a reset is done on the modem. Is there a high speed gigabit switch that I can use to improve this or should I get some media controlling software?

View 3 Replies View Related

Linksys Wireless Router :: Wrt54gs Wifi Download Speed 1/3 Of Wired Speed

Dec 28, 2010

I just discovered that my wireless download speeds are 5Mbps, compared to 16Mbps if my laptop is connected directly to the modem or wired through the router.  Uploads are 2Mbps either way.  I have a WRT54GS v.6 with firmware version v1.52.8 which I updated today, completed by setting factory default through the router webpage after I discovered this discrepancy.  The firmware update did not improve the download speed appreciably, if at all.Should the wireless connection be that much slower than the wired connection through the router?  If not, what sort of issues could I be having to account for this?
 
I did just replace my modem when I discovered I was having erratic speedtests and that corrected that problem.  That is when I became aware of the wireless issue, so not sure how long that has been the case.  I have Charter's 16/2 HSI, living in a sparsely populated area with solid internet service.  There is no external nor internal interference on this 2.4Ghz band.

View 8 Replies View Related

Linksys Wireless Router :: WRT54G Speed Test Shows Slow Speed

Nov 6, 2011

I have a Arris DLS with 12 Mbps Download and when I Connect my laptop directly I get the same speed as 12 Mbps but when I do the speed test with my linksys I get only 5 Mbps. How to upgrade to the new WRT54GL or WRT54GS?

View 1 Replies View Related

Cisco Switching/Routing :: What S The Fabric Speed (backplane Speed) Of A Nexus 2232 10G EX

Jan 12, 2013

What s the fabric speed (backplane speed) of a Nexus 2232 10G EX?What is the forwarding rate (Mpps) of the same 2232 FEX? 

View 6 Replies View Related

Belkin Basic USB Wireless Adapter / Very Slow Download Speed - Upload Speed Is Fine

Jan 11, 2011

Recently my desktop has experienced very slow download speeds (~0.11 Mbps), however the upload speed appears to be in line (~2.0Mbps). These numbers are taken from Comcast's speed test (my ISP). It is obviously a problem with my PC because everything else on the network (PS3, Laptop) have great signals with no problems. I just recently reverted the Desktop back to its factory state, and everything was working fine for a couple of months. The desktop in question uses Vista 32-bit and the Belkin Basic USB Wireless Adapter.

View 1 Replies View Related

Broadband :: Will Wired Speed Change With Rated Speed Of Wireless

Mar 9, 2012

I am using Linksys wirelless G router, will my wired speed on desktop increase when I change to a wirelless N router for laptop and ethernet for wired desk top? I don't need anymore wireless speed but am wondering if I upgrade will my wired desktop pick up more speed.

View 2 Replies View Related

Cabling / Cards :: Download Speed Breaks Without A Speed Limit?

Jan 24, 2013

On board NIC: Intel 82579V Gigabit Network Controller (asus sabertooth x79 motherboard)I installed the drivers for it from intel's site.f I set link speed to auto (chooses 100mbps full duplex) or 100mbps full or half duplex, any HTTP downloads get slowed to a crawl (30kbps) (steam downloads remain at normal speeds). If I set it to 10mbps full duplex, download speeds jump to normal (500kbps for most HTTP sources)his happens on just this new computer (wired connection), any other computers on the network (wireless) work just fine

View 8 Replies View Related

D-Link DIR-655 :: Download Speed Fine But Upload Speed Is Way Slow?

Mar 17, 2011

I live in the tampa bay area, I have bright house (BHN) as my service provider, which provides a Road Runner Lightning (40/5) package.  I previously used BHN's top tier (20/2) back in July (and prior) with no problems.

After converting to Lightning in August of this year (2010).  Of course, BHN (and every other provider) wants to force a modem/router down your throat, so I had them bridge it (in short, turn it into a dummy modem with no routing). I had an SMC branded modem gateway at the time.  I work from home 2 days a week (so I can spend more time with my kids during morning, lunch, right after work) and this requires me to use QoS to ensure my VOIP work calls don't get dropped, if the family is watching youtube videos or watching netflex. 

My network was as follows SMC Modem >WAN IP>>WAN Port>>D-link DIR-655>>Switch Ports>PC1, PC2, PC3

Everything seemed fine (from a usability stand point) till about 2 weeks ago when my upload speed seemed to grind to halt.  Normally I was able to upload about 200-300K per second, and I noticed this dropped to about 45K per second during a drop box upload.   First thing I did was power cycle both my modem and router (in the proper/usual order).  After they both come up, I start using speed test to find out what my upload speeds were.  I was getting about 39Mbps down, but only .56Mbps up still.  I factory reset my router.... test, similar speeds.  Power cycle all computers (just in case), and then modem/router.  Tested, similar speeds.   Updated the firmware to the latest. Same issue

Called BHN customer service, they factor reset it, but it wasn't in bridge mode.  If I by passed the 655, in factory mode (non bridge mode) upload speeds returned to better than expected states.  If I bridged the cable modem, upload speeds seemed to crash.

Had BHN replace the modem, seemed fixed for a day, then issue came back.  Had them come back out and replace it again, this time with a Motorolla Surfboard modem... same issue.  Fine during factory reset, however after they bridge the modem, upload speeds were fine.  Told BHN I would take it from there.. Connected up the DIR-655, and upload speeds crashed again. (.6Mbps).  Called D-Link Support, and the Chinese English speaking rep seemed to not be listening to me and tried to have me adjust my MTU as well as Wireless settings.  Long story short... the rep was a level 0 id10t and I hope D-link will consider hiring better employees/contractors.  So I was all about to give up and replace it with a DD-WRT capable router (which it takes me a lot to want to swap hardware), when I discovered the wan shaping was on.  Which I thought to myself... nah... QoS has never messed up before... why would it be the cause.  Turned off wan shapping... and voila.  Issue seemed to be insta-resolved.

Unsatisfied with that... I decided to dig a lil deeper. I turned on Wan shaping again, but decided to set the settings manually instead of auto detect.   

Here are the settings I used... (Advanced Tab>QoS)
Enable Traffic Shaping - Checked
Automatic Uplink Speed - Unchecked
Manual Uplink Speed - 5000
Connection Type: Cable or Other Broadand Network

Enable QoS Engine - Checked Automatic Classification - unchecked (this checked seemed to affect my upload speed by about 5-10% during testing) Dynamic Fragmentation - unchecked (this checked seemed to be the worse enemy for upload speed)

While I know I'm not any network guru (still have to use a subnet calculator for subnetting), I think I did a pretty good job drilling down the issue (once I got passed my service provider replacing modems).

Anyways, I've had overall good luck with D-Link products, even have a 5 port 10/100 switch (all metal) from 1998 that works great.  Hopefully, D-Link will just either put more documentation on the web, or hire better employees.

View 3 Replies View Related

Servers :: Does Internet Speed Affect Hosting Speed

Apr 2, 2011

Are the users' download speeds depend on the hosting company's owner's internet speed? Let say if I was running my own server with my internet speed 1mb and LAN 100mbps, are my clients' download speeds restricted to maximum 1mb of any content from my server?

View 3 Replies View Related

Upgraded Connection Speed Is Slower Than Previous Speed?

Aug 13, 2012

I just upgraded my internet plan over the phone from 10mbps to 20mbps + WiFi. Now my connection speed is slower then it was before.

View 2 Replies View Related

Cisco Firewall :: ASA 5510 / Add A Mail Server In The LAN And A Webmail Using Port 3000 On The Server?

Jul 24, 2011

I'am using ASA 5510 and I try to understand how PAT is working.I want to add a Mail Server in the LAN and a webmail using port 3000 on the server. ( webmail must be reachable from the WAN)This is my Configuration :actually LAN users access internet using NAT with one global IP ( 194.x.x.69) which is the ASA WAN interface.

WAN ----- ISP Router ----------     FW     ---------- LAN -------- Mail Server + Webmail
|             (25) | (3000)
194.x.x.69    192.168.1.254                     192.168.1.6
 
I need to forward port 3000 and port 25 from outside to inside.For example, from the WAN : [URL] must be redirect toward 192.168.1.6:3000 . What is the Correct Configuration ? And what about the Inside/Outside Traffic,Is there any configuration to add ?

View 2 Replies View Related

MSCHAPv2 / Setup Secure VPN Server Using Windows Server 2012 Without Domain?

Jan 10, 2013

i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:

PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication

Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.

However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.

My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Unable To Select Folder Access / FTP Server / Media Server

Dec 9, 2012

I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server.  I click them and nothing happens.Also, the Cisco light on the router keeps blinking.

View 5 Replies View Related

Cisco Firewall :: ASA 5505 - Proxy Server Send Register To Hosted Server Private IP Changed

Aug 23, 2011

We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.

Here is debug log on real time monitoring.
 
Aug 24 2011    05:21:19    302015    203.xxx.xxx.226    192.168.1.51     Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011    05:21:19    607001    203.xxx.xxx.226         Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011    05:21:19    710005    203.xxx.xxx.226    99.xxx.xxx.107     UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063

Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.

View 2 Replies View Related

Windows 2003 Server - Dhcp Server Cannot Ping Client

Sep 29, 2011

i am facing the same problem now but am using windows 2003 server

View 1 Replies View Related

Cisco Application :: ACE 4710 Server In Multiple Server Farms

Jul 23, 2012

I put multiple rservers in multiple server farms?
 
So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.
 
Can I then create serverfarm test_production and put both rserver1 and rserver2 in it?  Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.  

View 1 Replies View Related

Cisco Application :: CSS 11503 - Server-to-server Load Balancing?

Feb 16, 2012

I'm trying to design a CSS configuration that allows servers in the same vlan to be the source and destination of load-balanced traffic. My thought is to add two new vlans, one for the VIPs and one for the servers, then NAT the source IPs going from the LB to the servers.
 
Is this the right way to do it?I've never NATted using CSSs, so I wanted to verify what I'm thinking.Our current config trunks the vlans -
 
interface 1/1
   trunk
   vlan 1
    default-vlan
  vlan 555

[code]....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved