Sony Bravia NX720 Won't Connect To Netgear WNDR3700
Jun 22, 2012
I have had a Netgear WNDR3700 wireless router for over a year now, and have had no problems connecting to wireless devices (currently connects perfectly to: windows 7, OSX, Android, and Meego). I have recently purchased a Sony Bravia NX720, which has a built in wireless card. When I connect the television via LAN to the router the internet works fine, however when I connect via my wifi network (i.e. there is no physical connection between the tv and the router) I get the following message:
Connection Results
Wireless Device On TV: found
Local Access: OK
[Code].....
View 7 Replies
ADVERTISEMENT
Jan 23, 2011
I cannot make my Sony Bravia Connect to our Network using a Cat5 cable directly connected to the Router. (Netgear) The Wireless works just fine as both of our laptops and our son's Wii are connected without issue...I have rebooted everything multiple times, did a hard restore on the television. When we connect directly to the Modem. the TV will connect to the internet. But when we use the router.. No go..
View 3 Replies
View Related
Jul 3, 2012
I recently bought a Sony Bravia HD TV with wireless internet capabilities. When I try to connect to my wireless internet. The TV finds our wireless router name, but when we try to finally connect wirelessly it gives the following message: TV wi-fi found, local access failed and network access failed. The router we have is a Netgear PK500.
On the TV we have three differant ways for the tv to locate the router they are by scanning, the WPS button and by entering the WPS pin. We've tried all three and got the above message.
[code]....
View 1 Replies
View Related
Sep 13, 2011
I'm having an issue with my Sony Bravia 3D TV. It has wireless built in LAN and I've been using it to connect wirlessly through my router. A few days ago it just stopped connecting. I had the network setting on my TV for the IP adress on auto, but I input manual settings (router ip adress) to see if it would work, no success. Everytime I try and connect it says
wirless device- ok
local access- failed
internet access failed
I can use the internet with my computer/phone/portable gaming device, just not the TV. I tried disabling my firewall on my computer to see if it was causing an issue but that didn't work. My router is a gateway 2wire and my computer is a windows vista laptop.I went ahead and did the ipconfig as I suspect it'll be needed?
Windows IP Configuration
Host Name . . . . . . . . . . . . : Alyssa-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
[code]....
View 5 Replies
View Related
Mar 30, 2013
i seem to be having problems connecting to the wireless set up on my sony bravia tv.
Connections results
Wireless device on tv found
Local access failed
Internet access failed
View 5 Replies
View Related
Jan 29, 2012
I've just bought a Sony Bravia with in-built wireless connectivity but I cannot get it to connect to the internet.I have a Talk Talk dlink DSL2640R wireless router I have entered the following settings manually in to the tv:
IP Address . . . . . . . . . . . : 192.168.1.50
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Server 1 . . . . . . . . . . . : 192.168.1.1
DNS Server 2 . . . . . . . . . . . : 192.168.1.1
together with my WPA key which I have checked is correct.I keep getting the following result:
wireless device : OK
local access : failed
Internet access : failed
When I do ipconfig/all I get the following:
Windows IP Configuration
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
View 6 Replies
View Related
Jun 9, 2012
Just bought a Sony Bravia KDL-46EX723 today and i am currently trying to connect it to my BT home hub via a "wired set up". BT home hub does not seem to be detecting the TV at all, when i try to do an auto set up it searches for a while and then comes back with, cable connection:failed, local access:failed, internet access:failed.I have went on to my network page to see if it was connecting to anything else and it is finding my external hardrive no problem via the Ethernet cable.I have tried looking at my computer IP details and adding them manually to the TV, but no joy, just comes back with the same errors.
View 7 Replies
View Related
Jul 2, 2011
Is there a way to get the Internet onto my TV (Sony Bravia DL-46W2000), or do I have to buy a new Internet-enabled one? If so, what's the best one which is most Interneted - or are they all the same?I've heard about TV dongles that maybe can do WiFi to my router?There's no Ethernet or USB socket on the TV; just S VHS/Hi8/DVC; HDMI; SCART; and DVD player sockets.
View 1 Replies
View Related
Jan 16, 2013
Connected via wireless. All ok and says have Internet connection, but cannot access any video content' I.e. iplayer, etc. when check via refresh internet content (as Sony recommend) says "configuration failed while connecting. The system has encountered an error. If problem persists contact Sony (5006)". Sony say wireless strength insufficient, but when tried wired set up be relocating NETGEAR router gives same error message. Have NETGEAR wireless extender good signal with full connectivity via laptop, iPad and iPhone. Also when try server display settings says servers cannot be recognised. When go to options and select update list repeats "servers cannot be recognised. Have checked all IP etc and same as on laptop:
IP Address:192.168.0.11
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1?
View 13 Replies
View Related
May 7, 2011
On instruction from reviews of the TV on amazon, i bought a TP-Link wireless range extender to set up as a client/repeater (not sure which to use) to connect wirelessly to my router in another room so i can connect an ethernet to the TV for online functions without an overpriced Sony wireless dongle.I connect the device to the router, assign a random IP in the same subnet as my lan (since it has the same default address as my router) and set the default gateway to my router's IP address (assuming this is what it is asking for) and set the device to either client or repeater mode (unsure of which i need so have tried both) and everything seems fine until this point. However, I set the device to WEP security and set the WEP key to the same as my router as the instructions say and my router instantly loses it's internet connection entirely and repeatedly tries to reconnect and fail until i disable WEP security on the wireless range extender, at which point it successfully reconnects.
View 4 Replies
View Related
Sep 11, 2011
I'm attempting to network my 2007 Sony Bravia and connect to my BT Hub. Set's too old to have USB or DNLA but does have a vga input. Powerline plug system will give me net/pc access, with video and audio if I use an ethernet to vga adaptor at the back of the TV?
View 4 Replies
View Related
Dec 29, 2012
I have a Sony Bravia KDL46EX640 which comes with a wireless USB adapter. When I first bought this, I set up wireless network and it went fine. I was able to use the applications for video streaming.
I was trying it again now and it doesn't work. It seems like I can't even connect to my wireless network. I tried to set it up again but it can't find my wireless network. I have tried resetting the TV too (UP arrow + Power button on TV) and still doesn't work. Contacted Sony support but they didn't assist. I have a laptop and ipad connected to the router in the same room so signal is not a problem.
View 3 Replies
View Related
Dec 12, 2012
I have in my basement a router (DLink DIR-655) which is connecting to our ISP, and I have cables running to wall jacks in the first floor. A wall jack which terminates in the living room I have connected to a switch, a DLink 10/100/1000 (DGS-1005G). To this I have my PS3 connected which can connect to the internet fine (although it seems to not get the same upload / download speeds other devices get) and my Sony Bravia TV (KDL-46Z5100). The PS3 registers as GB, while the TV 100MB (its port lights orange).
The problem is I can't get the TV to connect to the internet. If I try DHCP, it doesn't seem to find the DNS server (on another switch connected to the same router in a different room). If I hard code the IP address, still nothing.
I found that if I connect the TV directly into the wall, it can connect. It's just through the switch I'm having problems. Additionally, even I then plug it back into the switch and connect the switch to the wall jack, the connect continues to work. It just seems that i can't get it initialize when connected to the switch.
View 1 Replies
View Related
Jun 4, 2012
I puchased the N600 WNDR3700v3 Dual Band Gigabit Router. I am able to see my wireless account I set up and is out there to connect to, but I cant connect. I can connect with an ethernet cord, but nothing wireless. It doesnt work for my home or work laptops. Prior to this I had another wireless set up and I am tempted to plug that one back in.
View 1 Replies
View Related
Nov 14, 2011
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 6134 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 463782 MB, Free - 396406 MB; D: Total - 13154 MB, Free - 1850 MB;
Motherboard: PEGATRON CORPORATION, Benicia
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
I recently bought a Sony Bravia HD TV with wireless internet capabilities.When I try to connect to my wireless internet. The TV finds our wireless router name, but when we try to finally connect wirelessly it gives the following message: TV wi-fi found, local access failed and network access failed. The router we have is a Actiontech PK500.On the TV we have three differant ways for the tv to locate the router they are by scanning, the WPS button and by entering the WPS pin. We've tried all three and got the above message.
View 7 Replies
View Related
Feb 26, 2011
I cannot connect through my wireless router (Netgear WNDR3700) WITH MY INSPIRION DUO. I can connect with a verizon MYFI wireless card, and alo through ethernet on Duo. I get "Problem with wireless adapter or access point" The software driver is newest. System ism W7 Home premium
View 1 Replies
View Related
Sep 10, 2011
I have a Netgear WNDR3700 v2 that I loaded with dd-wrt (v24-sp2 std). The only real problem that I am having is with the wireless. I can't get anything to connect at 300mbps. Even if I set it to n only it still only connects at 54mbps. Right now I am running it with encrytion off to rule out that causing any problems. and yes it would connect at 300mbps with the stock netgear firmware.
View 3 Replies
View Related
Mar 29, 2011
I have Netgear router and can't connect to Sony TVI thought earlier comments would solve my problems with my Sony KDL32EX713 but No.I didn't do anything at the router admin side as I couldn't see what could be changed (I'm on Vista). Its IP is 192.168.0.1I looked at adding a wireless device but it lost me.On the TV I tried the manual set up on that Bordersman suggested with the above in the default and DNS lines. leaving the sub net unchanged at 255.255.0.0 and the IP as 192.168.1.15.I said No to Proxy sever (didn't understand the comment about DHCP. It searched and came back with wireless device ok but local and internet connection failed
View 8 Replies
View Related
Aug 31, 2012
I have just bought a brand new Sony Vaio laptop VPCEH2. I have tried to connect wirelessly to my Netgear router (DG934G). The router and broadband is supplied by Sky. The laptop is running Windows 7. The router is sending a wireless sending fine to our desktop and two smartphones but the Vaio is unable to connect.
The Vaio finds the signal which is says is excellent but does not connect. Using an ethernet cable the internet connection is fine. I have been on the phone to Sky for nearly 2 hours across two nights and they have given up. We have tried setting up a new router password, disconnecting and reconnecting, establishing a connection in the Network and Sharing Cente using WPA security with no joy. I asked them if the router needed a firmware upgrade for Windows 7 and they were adamant that it did not - the firmware version is currently V2.02.44. I have checked the Windows 7 compatibility listings for Netgear routers but couldn't find the DG934G (or the DG834GT - which I believe is a newer version), listed.
The funny thing is that when Sky create a wireless connection in the sharing centre is did work for around 30 seconds where I was able to access around 5/6 webpages. The browser then stopped working and the connection was lost (with yellow warning triangle across the signal to bottom right of screen). Another thing to note was that Sky originally blamed the fault on a McAfee update. I looked into this and deinstalled McAfee and even spoke to them for a while and they confirmed that it had deinstalled and did some other tests and said it was definitely not their software causing the problem.
View 11 Replies
View Related
Apr 7, 2011
I cannot access the setup page, even without the modem connected to the router, even after pushing reset button. It says I have limited access both to the wireless and to the wired connections, but won't let me access the internet (via the separate modem)I can access the internet via the modem fine
View 2 Replies
View Related
Jul 27, 2011
I'm in a bit of a predicament. Trying to set up a Netgear WNDR3700 behind a SonicWall TZ170 SP (Standard OS). The only thing I really want the SonicWall to do is maintain site-to-site VPN connections to a few other networks that I work with.
The SonicWall WAN is passing Internet connectivity to the LAN ports as it is supposed to but the hangup seems to happen at the Netgear; it doesn't seem to want to receive Internet connectivity from anything but a modem and it doesn't want it going to any port but the Internet port (IE, it doesn't seem to want to share Internet via the switches).
I'm thinking this may be a limitation of the firmware and that dd-wrt might be the only answer but I thought I'd bring it here first as my last experience with dd-wrt wasn't a good one.
View 7 Replies
View Related
Jan 21, 2012
I am trying to forward the ports for several ip network cams, that have built in webservers, on this router. I have done this before on my old Linksys router with no problems but the Netgear has me stumped.The only way I can reach any of these devices from the Internet is to map them to port 80. But that limits me to one device, hence the need to forward more ports.All cams have fixed ip addresses so it is not an issue of their ip addresses changing.
View 19 Replies
View Related
Mar 3, 2012
My old router (a dlink dir-615) works just fine, but I figured I would upgrade and try to run OpenWRT or DD-WRT so that I could have one VPN for all my devices.
Anyway, I took the router out and followed the instructions (power off modem for at least 1 minute, connect modem to router, router to computer via ethernet, turn on modem first, wait for it to fully boot up, turn on router, wait for it to fully boot up, and then run the setup on routerlogin.net. The router is currently setup and I can connect my computer or iphone to it just fine, but I cannot access the internet. It doesn't make a difference whether I'm connected via ethernet or wifi. Either way, I get a "No Internet Access" message from Windows 7.
I've tried turning everything off and starting again. No luck. When I go back to my dlink router, everything works fine again.
So, in short:
Modem + ethernet = internet
Modem + Netgear router + ethernet = no internet
Modem + Netgear router + wifi = no internet
Modem + Dlink router (wifi...haven't tried ethernet) = internet
View 8 Replies
View Related
Mar 26, 2011
URL ,A Netgear WNDR3700 for only $80? Everywhere else I have looked they've been over $100.
View 2 Replies
View Related
Feb 16, 2011
I can connect to my LAN, but with local access only. I've been to the mfg's forums and tried their fixes, driver updates, and manual setups- no joy so I've reset to auto defaults. This laptop connects to several other routers wi-fi without problems. The WNDR3700 solved all my previous router problems, was truly plug and play, and may have cured me athsma as well. The event logs show a time-out during the semaphore portion of the log-in.
View 12 Replies
View Related
Jun 2, 2011
I have been unable to access my WHS when I recently traveled across the US. I have a Netgear WNDR3700 router. My DSL modem is a DSL-520B. I have AT&T DSL (6 Mbs). I have tried enabling and disabling "remote management", forwarding to ports 80, 443, 3390, and 4125 all with no success.Also, I believe (correct me if I am wrong) the remote management address is incorrectly listed as http://192.168.1.2:8080. I have also turned off USB storage in case of a possible conflict I have read about with port 80.
View 4 Replies
View Related
Jan 19, 2012
Just got my router running and when I connected to it via my laptop, it didn't ask for a password and it says unsecured connection when I put my mouse over it. Where do I go in the settings? I do not see it at all?
View 3 Replies
View Related
Oct 21, 2012
I have numerous phones and laptops that connect to the router just fine and fastThis ASUS laptop (windows 7) with Centrino N6150 is very slow to validate. At least it appears that's the issue. The icon in the tray starts with a ! in the connection, then in about 45 seconds goes to a blue chase circle, then in about 45 seconds connects.istory. I was getting disconnects from the WIFI router on a continual basis. I decided to put the router back to factory settings, did the pin reset etc, did a full setup and now we have this slow connect issue ALTHOUGH I never get a disconnect if I once get connected. Just seems to take forever to get it to connect.I've looked at conflicting IP's, no avail, seems fine. As mentioned, like the iphones connect almost instantly. The HP laptop connects fast (windows 7) but the asus now isn't happy.
View 19 Replies
View Related
Mar 21, 2013
I have two computers(with problems over 15 that work fine) an All in one Sony that has a qualcom 9285 and a new l521x dell laptop with a dell 1901 (also atheros).I have these issues with the sony for a few years - and just wrote it off as a computer problem - we have had the sony tech come out and replace the entire motherboard, wifi module?what made me link the issue with Atheros and the router was that my new laptop is behaving the same way as the sony. They both show connected to interenet (windows 7 64 bit(sony) and windows 8(dell)) I get an IP address, and I can ping websites. If I click to watch the network traffic (on the local connection status activity) I can see 50,000 bytes received every second I have updated the sonys and dells drivers to the latest one both from sony/dells site and from atheros download site as well - but it doesn't seem to make any difference The router also states its fully up to date
Hardware VersionWNDR3700
Firmware VersionV1.0.7.98NA
GUI Language VersionV1.0.0.64
View 5 Replies
View Related
Oct 26, 2011
I use both Gigabit LAN and "N" class WIFI through my WNDR3700 to connect to my Network. Can I use a Verizon MIFI4510L to connect to the Internet?
View 1 Replies
View Related
Jan 11, 2012
I've been replacing my Netgear WNDR3700 (currently only serving as wired router and gigabit switch) with an Untangle box.Obviously, only the free "Lite" version would be worth it, as the others are priced ridiculously for non business use. I've had a hard time figuring out from their webpage how the features of the "Lite" compare to the others, particularly how Spam Blocker Lite, Web Filter Lite and Virus Blocker Lite compare to the full versions of each.
Is the untangle router any good? How do its management features compare with consumer solutions?The new web caching feature seems really cool too, especially when multiple systems grab the same large updates or download the same steam games, but at $54/year it seems a bit excessively priced for home use, so I'd probably just be sticking with the base free version.
View 19 Replies
View Related
Oct 31, 2012
I have Comcast cable and prior to a couple days ago, it has always been smooth @ 36mbps download and 5mbps upload. I have a Netgear WNDR3700 and Motorola 6121 connected to my PC via Ethernet cable. Up until a couple days ago, I've been getting lag spikes where my games would completely freeze for a good 2-3 seconds and resume, as if the entire connection dropped and reconnected. I did a speedtest and I was getting around 4mbps download and 1-2mbps upload with huge fluctuation in speed.
I called Comcast and they said they were seeing a "red" signal error from their end so they sent out a tech to my house. He came over, changed some cables outside because they were corroded and that's about all he did. I tested my connection while he was still there and I was again getting 36mbps download and 5mbps upload. It was a quick 1-2 test so everything seemed normal until I started to see lag in games again.
I am getting the same lag spikes, albeit it's not as bad as before but it's still pretty annoying. Using speedtests, I am still getting 36mbps download but the graphs show that there are inconsistencies where there would be sudden drops in speed and picks back up still to show 36mbps. These drops are what I assume are the lag spikes. The upload is also suffering now, dropping down to 2-3mbps and it takes the test about 20-30seconds to load the upload portion of the test. Even loading web pages, sometimes it locks up for a few seconds longer than it should, which is normally instantaneous.
I have tried connecting my PC directly to the modem to bypass the router and am still getting the same lag, probably a little LESS but still the lag is there. My router is has always been updated to the latest firmware.
View 4 Replies
View Related
Jul 2, 2011
I'm going to be moving into a place in the next couple months where I'll have to go wireless on my desktop (until now I've just done Ethernet so I don't even have a wifi card on my desktop). The router/modem aren't anywhere near my bedroom so my gear will be going wireless from now on All my devices are built-in wifi ready but not my desktop.
I would like recommendations as to a rock-solid, reliable, fast and well performing card as I can to make up for no hardwired connection. Especially with BF3 coming out I'm not all that thrilled with being forced into this situation but you gotta do what you gotta do. Anyhow, I'll be bringing my router (Netgear WNDR3700) so I'll have the range and speed from there about as good as I can get, so I'd like a card of equal merit.
One side note...probably not really feasible considering I want speed and performance as a priority, but I would love a card (if possible) without bullshit antennas sticking out of the case, or with external antennas you have to set up on your desk. I will go that route if I have to but man that is an aesthetic nightmare, IMO. The ones that stick out of the back of the case are the worst looking for me just as a caveat.
View 1 Replies
View Related
