Actiontech Pk500 - Sony Bravia Tv Found Wifi But Local Access Failed?
Nov 14, 2011
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 6134 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 463782 MB, Free - 396406 MB; D: Total - 13154 MB, Free - 1850 MB;
Motherboard: PEGATRON CORPORATION, Benicia
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
I recently bought a Sony Bravia HD TV with wireless internet capabilities.When I try to connect to my wireless internet. The TV finds our wireless router name, but when we try to finally connect wirelessly it gives the following message: TV wi-fi found, local access failed and network access failed. The router we have is a Actiontech PK500.On the TV we have three differant ways for the tv to locate the router they are by scanning, the WPS button and by entering the WPS pin. We've tried all three and got the above message.
View 7 Replies
ADVERTISEMENT
Jul 3, 2012
I recently bought a Sony Bravia HD TV with wireless internet capabilities. When I try to connect to my wireless internet. The TV finds our wireless router name, but when we try to finally connect wirelessly it gives the following message: TV wi-fi found, local access failed and network access failed. The router we have is a Netgear PK500.
On the TV we have three differant ways for the tv to locate the router they are by scanning, the WPS button and by entering the WPS pin. We've tried all three and got the above message.
[code]....
View 1 Replies
View Related
May 16, 2011
MGMcc solved my set up problem with my KDL-32ex713 which (i've swapped for a new model - its a long story). I used exactly the same ip addresses for the set up on this KDL-373x524 and got messages "wireless device found, local access failed, internet access failed". As my router and pc are the same as last time why the set up doesn't work this time and what I should do?
View 2 Replies
View Related
Sep 13, 2011
I'm having an issue with my Sony Bravia 3D TV. It has wireless built in LAN and I've been using it to connect wirlessly through my router. A few days ago it just stopped connecting. I had the network setting on my TV for the IP adress on auto, but I input manual settings (router ip adress) to see if it would work, no success. Everytime I try and connect it says
wirless device- ok
local access- failed
internet access failed
I can use the internet with my computer/phone/portable gaming device, just not the TV. I tried disabling my firewall on my computer to see if it was causing an issue but that didn't work. My router is a gateway 2wire and my computer is a windows vista laptop.I went ahead and did the ipconfig as I suspect it'll be needed?
Windows IP Configuration
Host Name . . . . . . . . . . . . : Alyssa-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
[code]....
View 5 Replies
View Related
Mar 30, 2013
i seem to be having problems connecting to the wireless set up on my sony bravia tv.
Connections results
Wireless device on tv found
Local access failed
Internet access failed
View 5 Replies
View Related
Jun 9, 2012
Just bought a Sony Bravia KDL-46EX723 today and i am currently trying to connect it to my BT home hub via a "wired set up". BT home hub does not seem to be detecting the TV at all, when i try to do an auto set up it searches for a while and then comes back with, cable connection:failed, local access:failed, internet access:failed.I have went on to my network page to see if it was connecting to anything else and it is finding my external hardrive no problem via the Ethernet cable.I have tried looking at my computer IP details and adding them manually to the TV, but no joy, just comes back with the same errors.
View 7 Replies
View Related
Jul 2, 2011
Is there a way to get the Internet onto my TV (Sony Bravia DL-46W2000), or do I have to buy a new Internet-enabled one? If so, what's the best one which is most Interneted - or are they all the same?I've heard about TV dongles that maybe can do WiFi to my router?There's no Ethernet or USB socket on the TV; just S VHS/Hi8/DVC; HDMI; SCART; and DVD player sockets.
View 1 Replies
View Related
Jan 16, 2013
Connected via wireless. All ok and says have Internet connection, but cannot access any video content' I.e. iplayer, etc. when check via refresh internet content (as Sony recommend) says "configuration failed while connecting. The system has encountered an error. If problem persists contact Sony (5006)". Sony say wireless strength insufficient, but when tried wired set up be relocating NETGEAR router gives same error message. Have NETGEAR wireless extender good signal with full connectivity via laptop, iPad and iPhone. Also when try server display settings says servers cannot be recognised. When go to options and select update list repeats "servers cannot be recognised. Have checked all IP etc and same as on laptop:
IP Address:192.168.0.11
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1?
View 13 Replies
View Related
Jan 29, 2012
I've just bought a Sony Bravia with in-built wireless connectivity but I cannot get it to connect to the internet.I have a Talk Talk dlink DSL2640R wireless router I have entered the following settings manually in to the tv:
IP Address . . . . . . . . . . . : 192.168.1.50
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Server 1 . . . . . . . . . . . : 192.168.1.1
DNS Server 2 . . . . . . . . . . . : 192.168.1.1
together with my WPA key which I have checked is correct.I keep getting the following result:
wireless device : OK
local access : failed
Internet access : failed
When I do ipconfig/all I get the following:
Windows IP Configuration
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
View 6 Replies
View Related
May 7, 2011
On instruction from reviews of the TV on amazon, i bought a TP-Link wireless range extender to set up as a client/repeater (not sure which to use) to connect wirelessly to my router in another room so i can connect an ethernet to the TV for online functions without an overpriced Sony wireless dongle.I connect the device to the router, assign a random IP in the same subnet as my lan (since it has the same default address as my router) and set the default gateway to my router's IP address (assuming this is what it is asking for) and set the device to either client or repeater mode (unsure of which i need so have tried both) and everything seems fine until this point. However, I set the device to WEP security and set the WEP key to the same as my router as the instructions say and my router instantly loses it's internet connection entirely and repeatedly tries to reconnect and fail until i disable WEP security on the wireless range extender, at which point it successfully reconnects.
View 4 Replies
View Related
Jan 23, 2011
I cannot make my Sony Bravia Connect to our Network using a Cat5 cable directly connected to the Router. (Netgear) The Wireless works just fine as both of our laptops and our son's Wii are connected without issue...I have rebooted everything multiple times, did a hard restore on the television. When we connect directly to the Modem. the TV will connect to the internet. But when we use the router.. No go..
View 3 Replies
View Related
Jun 22, 2012
I have had a Netgear WNDR3700 wireless router for over a year now, and have had no problems connecting to wireless devices (currently connects perfectly to: windows 7, OSX, Android, and Meego). I have recently purchased a Sony Bravia NX720, which has a built in wireless card. When I connect the television via LAN to the router the internet works fine, however when I connect via my wifi network (i.e. there is no physical connection between the tv and the router) I get the following message:
Connection Results
Wireless Device On TV: found
Local Access: OK
[Code].....
View 7 Replies
View Related
Sep 11, 2011
I'm attempting to network my 2007 Sony Bravia and connect to my BT Hub. Set's too old to have USB or DNLA but does have a vga input. Powerline plug system will give me net/pc access, with video and audio if I use an ethernet to vga adaptor at the back of the TV?
View 4 Replies
View Related
Dec 29, 2012
I have a Sony Bravia KDL46EX640 which comes with a wireless USB adapter. When I first bought this, I set up wireless network and it went fine. I was able to use the applications for video streaming.
I was trying it again now and it doesn't work. It seems like I can't even connect to my wireless network. I tried to set it up again but it can't find my wireless network. I have tried resetting the TV too (UP arrow + Power button on TV) and still doesn't work. Contacted Sony support but they didn't assist. I have a laptop and ipad connected to the router in the same room so signal is not a problem.
View 3 Replies
View Related
Dec 12, 2012
I have in my basement a router (DLink DIR-655) which is connecting to our ISP, and I have cables running to wall jacks in the first floor. A wall jack which terminates in the living room I have connected to a switch, a DLink 10/100/1000 (DGS-1005G). To this I have my PS3 connected which can connect to the internet fine (although it seems to not get the same upload / download speeds other devices get) and my Sony Bravia TV (KDL-46Z5100). The PS3 registers as GB, while the TV 100MB (its port lights orange).
The problem is I can't get the TV to connect to the internet. If I try DHCP, it doesn't seem to find the DNS server (on another switch connected to the same router in a different room). If I hard code the IP address, still nothing.
I found that if I connect the TV directly into the wall, it can connect. It's just through the switch I'm having problems. Additionally, even I then plug it back into the switch and connect the switch to the wall jack, the connect continues to work. It just seems that i can't get it initialize when connected to the switch.
View 1 Replies
View Related
Dec 11, 2011
I tired connecting my Sony TV to the internet.It wouldn't connect automatically so I manually entered
IP Address 192.168.1.200
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Primary DNS 192.168.1.1
Secondary DNS 0.0.0.0
When it tested that it only gave me local access but not internet access. What else can I do to fix this? I use a netgear router WPN824N.
View 3 Replies
View Related
Dec 13, 2012
I just bought a Sony Vaio SVS15 and all I've done is set up the OS (Win7 Pro 64bit) and thus far, have not been able to connect to the internet wirelessly. I can use the internet if I plug in the ethernet cable but it does not detect any available networks using wireless even though I can connect wirelessly using other devices. I have updated the laptop using Windows Update and downloaded the latest driver for the wireless adapter (Intel Centrino Advanced N-6235) and still have had no success. Also, I have not yet installed any kind of Anti-Virus Software.
Here is the IP Config output
C:Windowssystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Sauchi-VAIO
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code].....
View 8 Replies
View Related
Dec 19, 2012
I am facing a kind of weird problem!! My Sony Vaio was getting connected to my Home wifi network and I could access Internet without any problem. Its been few days now that I can't access Internet though it shows connected. It does connect with the Wifi without any issue and even show the full signal like before, but actually there's no internet access. No browsers (IE,Chrome,FF) load any webpage, no messengers work.
View 1 Replies
View Related
Nov 17, 2012
My wireless internet at uni is showing up with two errors, when its connected it will come up saying that there is an ip address conflict then it will work for a short time then show this message when I try to load a webpage:The server at Google can't be found because the DNS look-up failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing*Google Chrome*from accessing the network.
View 13 Replies
View Related
Oct 28, 2012
Can't connect a sony vaio laptop to the internet.Says wireless association failed due to an unknown reason. My other laptop connects just fine though
View 2 Replies
View Related
Jun 19, 2012
My brother is visiting me, and i am trying to connect his computer to my router (wireless), i got connected but access says local Only.When connected by wire i get internet access ( Access: local and Internet)His computer had several adwares/spywares and numerous toolbars...... that i uninstalled. Cleaned by Malwarebytes and AVG 2012 free edition.Scan results are clean now.
ISP: RCN (cable 25mbps)
Router: Cisco Linksys E1000.
Cable Modem: Motorolla surband
I have 2 other computers connected through wifi on this router without any problem. Vonage Phone is connected to this router. Xbox is connected wireless and LG Blu-ray player is connected (wired).Xirrus Wi-Fi inspector screenshot is attached, IPCONFIG /all was run wile wireless was on ( of course Local only) but cable was not connected.
Windows IP Configuration
Host Name . . . . . . . . . . . . : PK-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
View 19 Replies
View Related
Sep 19, 2011
Last winter I bought a Sony Bravia KDL- 46EX710 DLNA LCD/LED TV it is connected to the internet through my Linksys WRT160Nv3 router via LAN, everything worked perfect when I stopped using it for the summer, this past week I turned it back on and tried to access my photos on my PC through the TV and it said it could not find the server, I have tried everything but to no avail. I have stopped my AVG antivirus and Windows firewall, still can't access the files on my PC, the PC's in the home can access each other over this router, even the internet is accessed by the TV over this router so the router and TV are connected but the TV can not access the computers over this router, I have tried a new ethernet cable and still nothing[CODE]
View 11 Replies
View Related
Nov 19, 2011
I have a Linksys WAG200G, I only use it for 2 devices a Win 7 PC and an iPad.
Surfing the net is fine, I'm get an average of 30ms when I ping to my local ISP.
But when I try to stream music or movies from my PC to iPad via iTunes, it starts playing for a couple of seconds then it stops, and then it will start again for a few more seconds. I tried pinging from PC to iPad and get a range from 400ms-2500ms.
I'm not sure which settings I need to adjust to make it work correctly.
View 3 Replies
View Related
Jan 21, 2012
I just found a slightly unsettling bug in the E4200v2 (running the latest firmware 2.0.36 build 126507).Administration > Local Management Access > Access via Wireless ... set to DISABLED. HOWEVER, when I attempted to access the web interface on a handy iPAD I had absolutely no problem getting through to the web interface (after providing username and passsword).Limiting access to wired clients seems like a simple a prudent measure ... which is why this option is there for the paranoid among us.This seems like a black-and-white bug.
View 9 Replies
View Related
Jul 19, 2012
I am using an E2500 as an access point, which is working fine. I have an Ethernet cable on one of the LAN ports of the E2500 connected to a LAN port on my gateway router. The LAN address of the E2500 is 192.168.7.3 and the LAN address of the gateway router is 192.168.7.1. Clients on the E2500 wireless network have no problems getting to the Internet through the gateway router. Clients on the E2500 wireless network can reach the E2500 local management port at 192.168.7.3 on port 80. On the gateway router I am forwarding WAN port 8083 to LAN address 192.168.7.3 at port 80. But I cannot access the E2500 local management interface via the gateway router. The E2500 should see the request as from 192.168.3.1 due to NAT in the gateway router, right? I can reach any of my actual access points this way, just not a router being used as an access point. Security/design limitation of the router?
View 2 Replies
View Related
Dec 28, 2012
Recently i switch from a Centrylink Actiontech Q1000 dsl modem to a Actiontech C1000a. Now I can know longer connect to my home network. My desktop computer is windows xp sp2, wired to the modem. My laptop is windows7 wireless.I have no problems connecting to the internet from either computer, just can not access either computer on the home network or print from the laptop. I used the same settings from the Q1000 modem in the c1000a.
View 5 Replies
View Related
Nov 14, 2012
We have configured following commands on switch to fallback to local Vlan if both radius server (policy persona's) is found dead. For test purpose we shutdown both servers (policy persona's) but fallback didn't work. We have 3750 switch running image 12.2(55)SE6 having following configuration.We do not know whether we configured switch in proper way or do we need to modify it. [code]
View 5 Replies
View Related
Sep 21, 2011
My desktop failed to detect the local area network, but my laptop successfully detects that network. What may be the reason? Both the case, the green light is blinking (Means there is not problem with the cable/line ?). Is it a problem related to the network pin? The same desktop is successfully connecting through another line. So it means, it not an issue with desktop computer or it's configuration.
View 8 Replies
View Related
Nov 13, 2011
I'm currently experiencing an issue where the on/off switch to my Sony Vaio VPCCW21FX is currently a little bit loose. I don't recall ever applying any type of shock to the computer but realized when I pulled it out of my bag, it was somewhat loose which was strange because I always handled my laptop with great care. So I'm attempting to connect to my WiFi network and when trying to turn it on and off, I don't get a response from the computer indicating it's now ready to search for a network, it acts like I intentionally turned off the WiFi and kept it off even though I have it turned to off.
I attempted to run the troubleshooting process on the laptop but it states that I need to turn on my WiFi to fix the issue but I already have it switched to on.
Now I know at this time that I wouldn't be able to get this repaired without being charged an arm and a leg so I wanted to see if it was possible to turn on the WiFi from within the laptop, somewhat like using software to turn it on instead of the hardware on/off switch for the wireless connection.
View 1 Replies
View Related
Feb 23, 2013
my hand phone set is sony ericsson xperia active, unfortunatly the icon that show wireless connection was being diappeared and I cant connect even to the router at my home.
View 1 Replies
View Related
Feb 27, 2011
I can't get wi-fi on my linksys to work with my computer. It finds it as a network but doesn't allow internet. cord connection works but no wi-fi. My computer data: Sony VAIO, Windows Vista, linksys adapter.
View 14 Replies
View Related
Jul 28, 2012
I am using a VAIO with win7. Also I have several items conected to the network. Since two week, my VAIO is not able to conect any WiFi network. I reinstaled the driver of the atheos9285 also tried to fix IP crash. Not much hapend. I downloaded the mentioned Xirrius WiFi Inspector, and when I click the Network on the upper left corner I get no information there.
View 19 Replies
View Related
Jul 12, 2012
how to configure WiFi on laptop Sony mini in window 7
View 2 Replies
View Related
