I tired connecting my Sony TV to the internet.It wouldn't connect automatically so I manually entered
IP Address 192.168.1.200
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Primary DNS 192.168.1.1
Secondary DNS 0.0.0.0
When it tested that it only gave me local access but not internet access. What else can I do to fix this? I use a netgear router WPN824N.
MGMcc solved my set up problem with my KDL-32ex713 which (i've swapped for a new model - its a long story). I used exactly the same ip addresses for the set up on this KDL-373x524 and got messages "wireless device found, local access failed, internet access failed". As my router and pc are the same as last time why the set up doesn't work this time and what I should do?
View 2 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 6134 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 463782 MB, Free - 396406 MB; D: Total - 13154 MB, Free - 1850 MB;
Motherboard: PEGATRON CORPORATION, Benicia
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
I recently bought a Sony Bravia HD TV with wireless internet capabilities.When I try to connect to my wireless internet. The TV finds our wireless router name, but when we try to finally connect wirelessly it gives the following message: TV wi-fi found, local access failed and network access failed. The router we have is a Actiontech PK500.On the TV we have three differant ways for the tv to locate the router they are by scanning, the WPS button and by entering the WPS pin. We've tried all three and got the above message.
I have going up the walls the last week.Basically just moved house and got broadband installed, my girlfriends laptop connected automatically, whereas my Compaq CQ60 Presario Notebook WindowsVista will not connectI have checked so many different forums trying to fix this problem, but to no avail im afraid... it looks like there is an excellent internet connection.... but cannot go on the internet because it says "Unidentified Network local access only"
View 6 Replies View RelatedI want to Turn off my local network's firewall on my computer but i dont know how.
View 1 Replies View RelatedI just replaced my wireless router. Wh? Now I'm not sure, I hoped a dual band router would give me better range. True or false?Regardless, I installed my new router but can only connect to my local network on my home laptop. However my work laptop connects to the same network and internet with no problem. SO does my husband's work computer.Any idea what the problem is? Other weird thing is that I have some random unsecured network that keeps popping up and my computer keeps automatically connecting. I've tried to remove it every way possible and it keeps coming back?
View 1 Replies View RelatedI have recently set up a computer on my network to host a website.So i have done the basics and created a Dyndns account etc.Now I can view the website via this domain flyingant.dyndns.org/ on computers outside of the network and the pc that it is hosted on.But my problem is that I cannot view the website on any other computer on the network, it takes me to the routers login page.
View 2 Replies View RelatedLocal Access Only on Vista PC
I restored an old Vista laptop to out-of-the-box state to give to my Dad. This laptop had a wireless connection to the internet and network previously. After the restore, I can't get a connection to the internet, even though my router sees it and it has an ip address. It says Unidentified Network Local Access only, and it doesn't see any of the computers on the network. Sometimes the other computers see it but can't connect, sometimes, the other computers don't see it. I hate Vista.
Stats on Laptop:
Toshiba A215-S4747
Atheros AR5007EG
All my other eight devices have an internet connection no problem, but I powered off the modem and router a couple of times with no change. I tried updating the Atheros to the latest driver on Toshiba's website for this model, but it doesn't seem to take. If I uninstall the old drivers, Windows rudely just immediately reinstalls them again. If I just update the driver, and pick the new file, the driver version remains the same as the previous driver. I'm banging my head on the wall with the driver
Ping successful on:
192.168.1.11 (the laptop's IP address)
localhost
[Code]......
I got a problem with my netgear WNDR3400V2.As u see in this picture the box allow guest to access my local network is greyed out.I made the router an access point and have no clue how to make it normal again.
View 2 Replies View Relatedi have a problem with my asa 5505 Remote VPN Connection with local network access , the VPn is working fine and connected , but the problem is i can't reach my inside network connection of 192.168.30.x , here is my configuration
ASA Version 8.2(1)
!
!
interface Vlan1
[Code].....
My computer is running on Windows 7. It has had no prior internet connection problems. It is wired to my DV-2020 router. My internet suddenly disappeared, as in, it doesn't work anymore. I'm not sure as to when it disappeared due to my personal absence, but from what I heard it was either during 'starting a game' or 'installing firefox add-ons updates'. Internet does work on other computers sharing the same internet (wired and wireless). On the computer that does not have access to internet it gives a "local area connection - No Network Access" and "local area connection - unidentified network." So far I've tried:
A system restore.
Restarting the router (at home as well as the provider)
Changing wiring.
Disabling / Enabling.
Disabling virusscanner.
What I'm trying to do is create a private network for local file sharing but also have internet access. There is a WRT54G router connected to a satellite modem in a separate building, just barely close enough to connect from my laptop, which is what sparked my original idea to use my WRT54GL as an access point.
View 1 Replies View RelatedI configure anyconnect vpn on cisco asa version 8.2. vpn user need to access internet so i configured split-tunnel. the split-tunnel working but i do not want to use split-tunnel for security reason. i want vpn user use our local network internet. how i do it?i think that i must do vpn user subnet nat and then what i need do additionally?
View 1 Replies View RelatedWe have SSL VPN using the AnyConnect client going to an ASA5540.
Is there a way to permit users to access their own LAN, but still force them to use the VPN tunnel for Internet access?
If I'm reading the documentation correctly, it seems that when you activate split tunnelling, it allow LAN access, but will also allow the user to access the Internet over the LAN instead of over the VPN.
The issue is Windows7 (notebook ASUS N61Ja connected through Wi-Fi) loses and can not find again network HDD storage (Western Digital My Book Live 3TB). Rebooting of the notebook works but after I close HDD folder window the issue comes back. The issue exists only with Wi-Fi connection. Everything is fine using LAN connection.
View 1 Replies View RelatedI have a Cisco ASA 5510 I am using ASDM 6.1
I have a LAN and a DMZ and an internet connection. I am using one of the internet connection IPs to host a HTTP service on a server in my DMZ. (its the same interface as my internet connenction but a different IP to the one used for internet connectivity)
so say my LAN is 192.168.1.x
and my DMZ is 172.168.1.x
I can access DMZ from Lan and vice versa. when i try to access the public IP (or URL) from a pc in my LAN i get nothing.
I have enabled DNS rewrite (doctoring) but it is still not working. the HTTP service is available from other sites.
I configure for our office site to site VPN project. Now I configured already Site to site vpn between ASA 5510 and 1841 router.
HQ LAN
Branch LAN 10.2.1.0/24 >>> ASA 5510>>>>> 1841 >>> INTERNET <<<<<< 1841 <<<<<< 10.30.3.0/24 ^^^^ Call Manager 2851
Now can access from Branch LAN to HQ LAN each other. I face the problems that are
1) In branch LAN , they can access HQ LAN & resource , but cannot access internet. I didn't configure NAT on PH Router
2) Can I access internet from BRANCH LAN through HQ LAN to INTERNET. Or Can I access Internet from Branch LAN from PH Router directly while access to VPN to HQ LAN ?
3) In Branch Site , hard phone cannot work but soft phone on PC can call to HQ. Hard phone IP are same in Remote Network (172.16.1.0/24 ) . Is it problem ? how can I configure separately ?
I recently took my Dell Inspiron1545 out of sleep mode and my wireless internet connection no longer works.i have tried power cycling the 2-wire modem and the Cisco Valet router and resetting as well. I also have another laptop and xbox that use this network and are having NO issues in connecting and working perfectly fine.
The only device not working is the Dell laptop. I've tried removing the network profile, uninstalling the wifi driver and reinstalling after powercycling the computer and still nothing but limited connectivity only The WLAN utility has stated that the "Gateway IP Ping" has failed Now the laptop will connect to internet via LAN cable however will not to WiFi
I have attached the IPconfig spec sheet and hopefully somewhat can steer me in the right direction and get me back up an running.
Windows IP Configuration Host Name . . . . . . . . . . . . : Zee-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoWireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1397 WLAN Mini-Card Physical Address. . . . . . . . . : 00-22-5F-BF-40-AB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::8830:577f:a3fc:6333%15(Preferred)
[Code] ........
I've been trying to set up my new Cisco 1921 Router to provide internet access to my local network but with no success. I've been reading guides and looking at videos and I have to be missing something becaouse I can't access internet (ping/tracert) from my local network.
The DHCP server works fine and the clients on my local network gets ip-adresses from the router but can't ping or tracert outside the local network.
[code]....
I have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?
View 8 Replies View RelatedNew laptop, Sony Vaio. At first it started having problems holding a wireless internet connection (kept dropping) now it won't connect at all, wirelessly.I have a Dlink DIR 625 modem which was working perfectly. I bought a new one, thinking this was the issue. Same thing happened. Contacted my ISP, they said the modem was fine (even came out to confirm). It is a Scientific Atlanta modem. Contacted Sony and their tech did a lot of R.C to my laptop and tried a number of things. They couldn't solve it, thought it was a hardware issue (loose wire in the network card) so they had me bring it out of town to be fixed. I did that, they said it wasn't hardware that it was software and that it was working in their store. I got it home and it still didn't work.To be on the safe side, I swapped out the modem and got a new one. Still not working. I followed instructions in previous forums to do a 'stack reset' and it still didn't resolve my issue.I updated the network drivers from Sony's site, disabled AVG firewall entirely and it still doesn't work. I can connect now only by hard line connection but even still it drops. [code]
View 14 Replies View RelatedI have a desktop computer, Sony VAIO laptop, and a Motorola router. The computers are both running Windows 7 Professional. The desktop computer is running 32 bit Windows and the Laptop 64 bit.
My network appears to be Windows Homegroup which got setup after a crash of the desktop. Previously, I ran a network setup with Motorolas tech support and it ran fine (before crash and reinstall on desktop computer). I had access back and forth between both computers. I would rather not run Windows Homegroup but it looks like I am stuck with it if there is no way to remove it and resinstall another network or unless I can have two networks on my computer.
The error message that I get when trying access my laptop from the desktop is
"Windows cannot access \name-VAIOackups You do not have permission to access \name-VAIOackups"
I have set file sharing on both computers and am running all files as administrator. How can I regain access between these computers?
I can't get my Sony VAIO to connect to the Internet via wireless or ethernet. It was working fine and then suddenly lost all Internet connectivity. Under the status it says "connected with limited access." I have an iPad and my smartphone running on the network so I know it's not a network issue.
View 14 Replies View RelatedI have a new actiontec modem/router, used to have a D-link modem/router and all my devices, computers worked fine. now everything connects except the Sony TV with Sony USB wireless lan adapter. I have read a lot of posts and one here was sort of the same. The problem is I get the 169.254.72.161 which I understand is what it sets to when it won't connect to the router and get a new Ip address. I haven't been able to manually put the ip in. Also even connecting with the cable direct to the modem/router still doesn't connect.The member who also had this problem was with his xp win computer. My problem this is with a tv device so I can't release ip or anything. They said his problem was a" be that Winsock2 is corrupted."
View 6 Replies View RelatedI have a Sony TV connected to my Wi-Fi and a MacBook Pro connected to my Wi-Fi. How do I make a network of these two pieces of equipment?
View 2 Replies View RelatedMy Sony Vaio laptop with windows 7 cant connect wirelessly to the internet. I can only connect using Ethernet cable. I have followed all the advice I can find online but nothing is working. Ive downloaded new drivers etc. I am a student in a house with 6 other people and I am the only one experiencing wireless connectivity problems
View 1 Replies View RelatedTrying to set up a connection for wieless network so I can use my Sony BDP-S570 to connect to netflix. It said to click "wireless network"on task bar but I cant find it.
View 1 Replies View RelatedI am facing a kind of weird problem!! My Sony Vaio was getting connected to my Home wifi network and I could access Internet without any problem. Its been few days now that I can't access Internet though it shows connected. It does connect with the Wifi without any issue and even show the full signal like before, but actually there's no internet access. No browsers (IE,Chrome,FF) load any webpage, no messengers work.
View 1 Replies View RelatedI have a Sony KDL 32EX520 internet capable TV that I cannot get to connect to the internet.
View 9 Replies View RelatedI am trying to connect a sony blu-ray player to the internet using a powerline adapter but the BR player does not connect. I currently have two Satellite DVR receivers using the same powerlines and they work fine, but the Sony player does not connect to the network. I have to try a wired connection because my wireless signal to the player has trouble with netflix and other download services. Connection gets lost.
View 5 Replies View Relatedi just bought a new Sony Vaio VPCSB 490 X Laptop. I should preface this with the fact that my old vaio i had to get rid of because it stopped connecting to any wireless networks (among other reasons.) I had it looked at and was told the wireless card was broken.
My problem with the new one is that i can only get limited connectivity to the network, even though all other wireless devices in the house are fine. Here's the ip configuration i brought up when the computer was connected to the router with an ethernet cord:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersTaylor>IPCONFIG/ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : Taylor-VAIO
Primary Dns Suffix . . . . . . . :
[code]....
Unable to detect wireless network on sony vgn-nr32l (vista operating system).
View 1 Replies View RelatedI have a Sony Bravia KDL46EX640 which comes with a wireless USB adapter. When I first bought this, I set up wireless network and it went fine. I was able to use the applications for video streaming.
I was trying it again now and it doesn't work. It seems like I can't even connect to my wireless network. I tried to set it up again but it can't find my wireless network. I have tried resetting the TV too (UP arrow + Power button on TV) and still doesn't work. Contacted Sony support but they didn't assist. I have a laptop and ipad connected to the router in the same room so signal is not a problem.