I have recently set up a computer on my network to host a website.So i have done the basics and created a Dyndns account etc.Now I can view the website via this domain flyingant.dyndns.org/ on computers outside of the network and the pc that it is hosted on.But my problem is that I cannot view the website on any other computer on the network, it takes me to the routers login page.
View 2 RepliesWe have been noticing a strange issue since upgrading to Comcast Business with a new Motorola 6580 modem/router:certain common websites can no longer be accessed via the network (although they load fine when accessed via smartphone 3/4G)I already did some reading on the subject and it looks like the Firewall is to blame:when I switch Firewall to "Off", everyone can access the websites ok,as soon as I switch Firewall back to "Low" - no more website access.Question: is there any workaround for this issue other than turning off the Firewall?
View 1 Replies View RelatedI was able to access my website [URL] just fine before I changed the cPanel password. Now I cannot even load the site or load the cPanel login page here: [URL] All I did was change the cPanel password. When I use another computer that is NOT on my network, I can connect to the site fine. I'm assuming that my network is blocking it for some reason after the cPanel password change. I tried the IP address in the address bar as well (still no go). Cannot "ping" the IP address either. I reset my modem and router as well. Cleared cache in browsers as well.
View 1 Replies View RelatedI have a problem with regards to accessing our website.The access to our sites goes on and off all throughout the day.been reading to a lot of forums and suggestions but nothing seems to work for my case.[CODE]
View 1 Replies View RelatedI'm trying to have a website name: remote.test.com route to a local IP address but can't seem to get it working with this router. I don't want to use the windows hosts file as there are different Operating Systems that will connect and so routing though this D-Link is the only option. I have my wireless router connected to a separate network switch though it's WAN port where other computers sit as well as the target machine. I can use the internet as normal like this so things are working fine.
[code]...
I was able to access my website jetbaby.com just fine before I changed the cPanel password. Now I cannot even load the site or load the cPanel login page here: jetbaby.com:2082 All I did was change the cPanel password. When I use another computer that is NOT on my network, I can connect to the site fine. I'm assuming that my network is blocking it for some reason after the cPanel password change. I tried the IP address in the address bar as well (still no go). Cannot "ping" the IP address either. I reset my modem and router as well. Cleared cache in browsers as well. I also disabled firewall and anti-virus for testing.
View 2 Replies View RelatedI've just registered with NO-IP (free account), created a host, installed the client (in CentOS) and I want to see a website I'm running locally in that computer from another computer (via internet :). How do I access it?My host is "customtrack.no-ip.org "And in that unix box I've got a published website that I can access from any browser in the following URL: [URL]When I log in to from the browser from another computer I get the following error message:
Quote:The connection was reset- The connection to the server was reset while the page was loading.The site could be temporarily unavailable or too busy. Try again in a few moments.If you are unable to load any pages, check your computer's network connection.If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
How do I tell CentOS that I want to redirect that site I'm hosting locally [URL] to [URL]? I believe that's not done automatically. How do I configure the redirection?
i just upgraded from the E4200 to the EA6500. i have a few websites on one of my machines, which i can access from outside my network no problem, but when i try to access it from inside the network, firefox gives the message "the connection to the server was reset while the page was loading". i did not have this problem with the E4200.
View 7 Replies View RelatedI have going up the walls the last week.Basically just moved house and got broadband installed, my girlfriends laptop connected automatically, whereas my Compaq CQ60 Presario Notebook WindowsVista will not connectI have checked so many different forums trying to fix this problem, but to no avail im afraid... it looks like there is an excellent internet connection.... but cannot go on the internet because it says "Unidentified Network local access only"
View 6 Replies View RelatedI want to Turn off my local network's firewall on my computer but i dont know how.
View 1 Replies View RelatedI tired connecting my Sony TV to the internet.It wouldn't connect automatically so I manually entered
IP Address 192.168.1.200
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Primary DNS 192.168.1.1
Secondary DNS 0.0.0.0
When it tested that it only gave me local access but not internet access. What else can I do to fix this? I use a netgear router WPN824N.
I just replaced my wireless router. Wh? Now I'm not sure, I hoped a dual band router would give me better range. True or false?Regardless, I installed my new router but can only connect to my local network on my home laptop. However my work laptop connects to the same network and internet with no problem. SO does my husband's work computer.Any idea what the problem is? Other weird thing is that I have some random unsecured network that keeps popping up and my computer keeps automatically connecting. I've tried to remove it every way possible and it keeps coming back?
View 1 Replies View RelatedLocal Access Only on Vista PC
I restored an old Vista laptop to out-of-the-box state to give to my Dad. This laptop had a wireless connection to the internet and network previously. After the restore, I can't get a connection to the internet, even though my router sees it and it has an ip address. It says Unidentified Network Local Access only, and it doesn't see any of the computers on the network. Sometimes the other computers see it but can't connect, sometimes, the other computers don't see it. I hate Vista.
Stats on Laptop:
Toshiba A215-S4747
Atheros AR5007EG
All my other eight devices have an internet connection no problem, but I powered off the modem and router a couple of times with no change. I tried updating the Atheros to the latest driver on Toshiba's website for this model, but it doesn't seem to take. If I uninstall the old drivers, Windows rudely just immediately reinstalls them again. If I just update the driver, and pick the new file, the driver version remains the same as the previous driver. I'm banging my head on the wall with the driver
Ping successful on:
192.168.1.11 (the laptop's IP address)
localhost
[Code]......
I got a problem with my netgear WNDR3400V2.As u see in this picture the box allow guest to access my local network is greyed out.I made the router an access point and have no clue how to make it normal again.
View 2 Replies View Relatedi have a problem with my asa 5505 Remote VPN Connection with local network access , the VPn is working fine and connected , but the problem is i can't reach my inside network connection of 192.168.30.x , here is my configuration
ASA Version 8.2(1)
!
!
interface Vlan1
[Code].....
My computer is running on Windows 7. It has had no prior internet connection problems. It is wired to my DV-2020 router. My internet suddenly disappeared, as in, it doesn't work anymore. I'm not sure as to when it disappeared due to my personal absence, but from what I heard it was either during 'starting a game' or 'installing firefox add-ons updates'. Internet does work on other computers sharing the same internet (wired and wireless). On the computer that does not have access to internet it gives a "local area connection - No Network Access" and "local area connection - unidentified network." So far I've tried:
A system restore.
Restarting the router (at home as well as the provider)
Changing wiring.
Disabling / Enabling.
Disabling virusscanner.
What I'm trying to do is create a private network for local file sharing but also have internet access. There is a WRT54G router connected to a satellite modem in a separate building, just barely close enough to connect from my laptop, which is what sparked my original idea to use my WRT54GL as an access point.
View 1 Replies View RelatedI configure anyconnect vpn on cisco asa version 8.2. vpn user need to access internet so i configured split-tunnel. the split-tunnel working but i do not want to use split-tunnel for security reason. i want vpn user use our local network internet. how i do it?i think that i must do vpn user subnet nat and then what i need do additionally?
View 1 Replies View RelatedWe have SSL VPN using the AnyConnect client going to an ASA5540.
Is there a way to permit users to access their own LAN, but still force them to use the VPN tunnel for Internet access?
If I'm reading the documentation correctly, it seems that when you activate split tunnelling, it allow LAN access, but will also allow the user to access the Internet over the LAN instead of over the VPN.
The issue is Windows7 (notebook ASUS N61Ja connected through Wi-Fi) loses and can not find again network HDD storage (Western Digital My Book Live 3TB). Rebooting of the notebook works but after I close HDD folder window the issue comes back. The issue exists only with Wi-Fi connection. Everything is fine using LAN connection.
View 1 Replies View RelatedI have a Cisco ASA 5510 I am using ASDM 6.1
I have a LAN and a DMZ and an internet connection. I am using one of the internet connection IPs to host a HTTP service on a server in my DMZ. (its the same interface as my internet connenction but a different IP to the one used for internet connectivity)
so say my LAN is 192.168.1.x
and my DMZ is 172.168.1.x
I can access DMZ from Lan and vice versa. when i try to access the public IP (or URL) from a pc in my LAN i get nothing.
I have enabled DNS rewrite (doctoring) but it is still not working. the HTTP service is available from other sites.
I configure for our office site to site VPN project. Now I configured already Site to site vpn between ASA 5510 and 1841 router.
HQ LAN
Branch LAN 10.2.1.0/24 >>> ASA 5510>>>>> 1841 >>> INTERNET <<<<<< 1841 <<<<<< 10.30.3.0/24 ^^^^ Call Manager 2851
Now can access from Branch LAN to HQ LAN each other. I face the problems that are
1) In branch LAN , they can access HQ LAN & resource , but cannot access internet. I didn't configure NAT on PH Router
2) Can I access internet from BRANCH LAN through HQ LAN to INTERNET. Or Can I access Internet from Branch LAN from PH Router directly while access to VPN to HQ LAN ?
3) In Branch Site , hard phone cannot work but soft phone on PC can call to HQ. Hard phone IP are same in Remote Network (172.16.1.0/24 ) . Is it problem ? how can I configure separately ?
I recently took my Dell Inspiron1545 out of sleep mode and my wireless internet connection no longer works.i have tried power cycling the 2-wire modem and the Cisco Valet router and resetting as well. I also have another laptop and xbox that use this network and are having NO issues in connecting and working perfectly fine.
The only device not working is the Dell laptop. I've tried removing the network profile, uninstalling the wifi driver and reinstalling after powercycling the computer and still nothing but limited connectivity only The WLAN utility has stated that the "Gateway IP Ping" has failed Now the laptop will connect to internet via LAN cable however will not to WiFi
I have attached the IPconfig spec sheet and hopefully somewhat can steer me in the right direction and get me back up an running.
Windows IP Configuration Host Name . . . . . . . . . . . . : Zee-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoWireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1397 WLAN Mini-Card Physical Address. . . . . . . . . : 00-22-5F-BF-40-AB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::8830:577f:a3fc:6333%15(Preferred)
[Code] ........
I've been trying to set up my new Cisco 1921 Router to provide internet access to my local network but with no success. I've been reading guides and looking at videos and I have to be missing something becaouse I can't access internet (ping/tracert) from my local network.
The DHCP server works fine and the clients on my local network gets ip-adresses from the router but can't ping or tracert outside the local network.
[code]....
I have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?
View 8 Replies View Relatedfor sometime I have not been able to access any google website. I can access all others?
View 5 Replies View RelatedSo recently i decided to try to play some rune scape since i played it through my childhood and wanted to try again, it went fine first 2 days, and after that i can't access the website at all. I've tried to ping it, and all that comes up is that request timed out, tried flush dns, restarting router/modem and even to change ip (which i did not succeed with).However i found this "solution" url... and reading the top comment, it says that "This problem occurs when viewing the same site over a router from more that one computer or application at the same time for a period of time." And i have done exactly that in the past days the site was working.
View 5 Replies View RelatedI'm trying to reach [URL] and just keep getting a timed out message. I had this problem before once and gave up trying to solve it and then one day I came across a post at SWI in my google results and amazingly, I was able to access the site. I have no idea what was different on that particular day.
Same symptoms in Firefox and IE so I don't think its a browser issue.
Tried accessing the site through the IP address - same result.
Tried safe mode with networking - same result
I reset my router a few days ago because of another issue but I haven't reset it since this problem began. I have tried restting my router dns to opendns and also google public dns, neither of which has made any difference.
I got a friend to confirm that the site is not down, as I suspected. Tried to ping the site using this and the only 2 UK locations on the list said 100% packet loss - is this relevant?
I'm having problem accessing myanimelist.net for months. I can access other websites except it. Some days I can access it and some days I cant. Just this morning I accessed it and then I returned during the afternoon and I can't access it anymore.
I tried doing the tracert in command prompt
C:Userswin7>tracert myanimelist.net
Tracing route to myanimelist.net [72.172.76.139]
over a maximum of 30 hops:
[Code].....
For the last couple months, I have had a serious problem with connecting to one (and only one) website: cms.bsu.edu (Ball State University, 147.226.7.60). This occurs from my home using a broadband connection. I say serious because this is my work website and I am an online instructor. Not being able to access BSU creates a serious problem for me. Note that this is 1) only an intermittent problem (only happens every few weeks, lasts for a day to a couple days, typically), 2) occurs with any and all browsers that I have tried, 3) occurs cross-platform (Mac or Win), on multiple machines, 4) goes away when using a neighbor's wi-fi signal from my home, 5) goes away when using these same machines with any other IP address (at McDonald's, BSU, etc., etc., etc.)Tech support at my IP suggested that we download virus software and confirm that the system is not infected.
We did this, but let me call your attention to the fact that 1) this is occurring to ALL of our computers simultaneously -- even though they are running different operating systems and that 2) there are virtually no viruses that infect more than one OS. So, the likelihood that this is a virus is very, very, very small. Furthermore this is intermittent (not typical of viruses), and two goes away when using anything other than our Ninestar ISP IP. Hopefully, you are beginning to see a trend here.Ninestar tech support has also suggested that the problem might be with our wi-fi router. However, that is not the case, as this problem exists even when hard-wired directly through the Ethernet (no wi-fi).
As far as I can tell, that pretty much isolates this problem to two sources:ttp//:cms.bsu.edu (Ball State University) and my ISP (NineStar). We have contacted Ball State and they have had no other reports of this problem. Since they have thousands of connections made per hour from the same platforms (PC and Mac) running the same software, that makes it very unlikely that the problem lies with them. Today, with BSU still unaccessible, I decided that I should force a reboot on the entire Ethernet system at home.
There is a box in my garage that is designed to route the signal to my phones, my cable, and my internet router so I powered it down just in case. This didn't make a bit of difference. Ethernet still works fine for all sites except 147.226.7.60. I also pinged BSU. Timed out on both Mac and PC via direct Ethernet connectionFinally, I have used proxies to visit BSU, but since they don't handle encrypted signals, this doesn't really . No email, no Blackboard, pretty much only viewing their website is possible.
I've been trying to access a particular website for several days now, but every time I try to I get the "Oops! Google Chrome could not connect to" error.The website in question is:I know that it is working as other people who I know post on the forum have not had the same problem.I've tried the standard things of clearing cache, switching wireless router off/on but still nothing.
View 15 Replies View RelatedI can't seem to be able to access my personal website from any of my home devices: computer,2xlatop,android phone all give me the same message: "Cannot connect to thebianchifam.mercury-gaming.com" I've been trying to connect with Google Chrome, IE and Firefox yet none of them work on either of the devices. I've asked other people to connect to the website and everyone says it's working just fine. I even used teamviewer on another computer in America and saw myself that it was working just fine. Also using the website : url... lets me connect just fine to website but It's rather annoying having to use a proxy server to do all the intensive forum work. I've been reading around all the forums and have found people with the same problem but none of them actually posted back saying how they fixed it. I was literally editing a blog page when I clicked on update and the website didn't let me connect anymore. I've tried flushing the DNS through CMD line with the "ipconfig /flushdns" command but it has yet to do anything. I restarted the rooter in the hope it will work but no succees. url...
View 14 Replies View RelatedI've gone through a variety of diagnostics and I honestly don't know what to think. It's not my computer, as I can access the site on this computer on a different network. It's likely not the whole of my LAN network either, because my kindle can access the site through it. I can always access it on this computer with a proxy as well. I can ping it fine, and tracert it equally as well.I've tried everything from socket fixes, DNS flushes, getting new WAN IP addresses. When I got a new WAN IP address the first time the site was accessible once, and then it stopped again after that. I can't clone the MAC address from the router, because it doesn't allow it.
View 7 Replies View Related