I have a problem with regards to accessing our website.The access to our sites goes on and off all throughout the day.been reading to a lot of forums and suggestions but nothing seems to work for my case.[CODE]
View 1 RepliesI was able to access my website jetbaby.com just fine before I changed the cPanel password. Now I cannot even load the site or load the cPanel login page here: jetbaby.com:2082 All I did was change the cPanel password. When I use another computer that is NOT on my network, I can connect to the site fine. I'm assuming that my network is blocking it for some reason after the cPanel password change. I tried the IP address in the address bar as well (still no go). Cannot "ping" the IP address either. I reset my modem and router as well. Cleared cache in browsers as well. I also disabled firewall and anti-virus for testing.
View 2 Replies View RelatedI am able to access all website except one particular website from my home network. Also, I am unable to access the same website using my ipod-touch. The website is up and running and it is not down. In order to verify, I took the laptop and ipod touch to starbucks. I was succesfull in accessing the website from starbucks using my laptop as well as my ipod-touch. Also, I tried to replace m existing router with a new router, but still the problem exists. Operating System: Windows Vista 64bit?
View 2 Replies View Relatedcan I add a server 2003 on my home wireless network (4 computers) to run a website. I am trying to redirect a AU domain to 2003 server
View 2 Replies View RelatedWe have a network of over 20 devices, all kinds (windows, android, mac enz...). Everything was going well until one of the mac-users tried to publish his website that contained a movie (at first the movie was 622 MB). If this user presses publish the internet is going away. The website won't publish, waiting doesn't work. While the internet isn't working I went to another pc in the network and started some ping experiments. I can ping any device in the LAN, outside the LAN something strange happens: let's say for 6 seconds it is ok, but then it fails for lets say 20sec, again 6 sec the ping returns ok (45ms), and goes down for a longer period. Eventually it is not coming back.The mac user himself cannot access the internet either. When the publishing is stopped, the internet is back in less than a second.
This problem is recent, and it isn't the first time this user published a video on his own website, on the same host with the same application (iWeb). I asked him to publish his site to a local folder and hand it over to me, I tried to publish it to the same host using my own FTP application (FileZilla), this worked without any problem (I am on the same network). This is what we tried:
- Compressing the video (it is now 26 MB, still not working), we have 2GB space from the host, no limits on filesize.
- Publishing the website without the video's, no problem
- I turned on logging (debugging level) in the modem/router, no entries at the moment things went wrong...
- I called the provider, they claim nothing is wrong at their systems.
So, can the modem be broken? I don't think so because I can use it with far more intensive tasks without going down.One thing is clear, it shouldn't be possible for one computer to block the internet for everybody, so changes in the configuration are needed (I think).
We have been noticing a strange issue since upgrading to Comcast Business with a new Motorola 6580 modem/router:certain common websites can no longer be accessed via the network (although they load fine when accessed via smartphone 3/4G)I already did some reading on the subject and it looks like the Firewall is to blame:when I switch Firewall to "Off", everyone can access the websites ok,as soon as I switch Firewall back to "Low" - no more website access.Question: is there any workaround for this issue other than turning off the Firewall?
View 1 Replies View RelatedI was able to access my website [URL] just fine before I changed the cPanel password. Now I cannot even load the site or load the cPanel login page here: [URL] All I did was change the cPanel password. When I use another computer that is NOT on my network, I can connect to the site fine. I'm assuming that my network is blocking it for some reason after the cPanel password change. I tried the IP address in the address bar as well (still no go). Cannot "ping" the IP address either. I reset my modem and router as well. Cleared cache in browsers as well.
View 1 Replies View RelatedI have recently set up a computer on my network to host a website.So i have done the basics and created a Dyndns account etc.Now I can view the website via this domain flyingant.dyndns.org/ on computers outside of the network and the pc that it is hosted on.But my problem is that I cannot view the website on any other computer on the network, it takes me to the routers login page.
View 2 Replies View RelatedI currently have a BT Home Hub 3 router and an Ubiquiti Power AP N.What I am trying to do is use the Ubiquiti access point as the main device for all connections in my house (ethernet and wireless) so that I can use the QoS settings etc. I basically want the Home Hub router to play as little role as possible in the network except for providing the ADSL internet connection.I know I need to enable DHCP on the access point but everytime I do so the devices connected to the access point lose internet connection.(BTW I have an ethernet cable connected from one of the routers LAN ports into the access point's WAN port)
View 2 Replies View Relatedi have an internet connection thrw USB from a ppp adapter from there i've made a netowrk with another computer now on the client computer from my network i have XAMP server who i want to be accessed from the internet .i have subdomain like radionis.zapto.org (192.168.0.2) registered at no-ip.org.now what IP i have to introduce there to make my server accessible
View 2 Replies View RelatedI have been using a laptop to stream videos through my xbox for over 2years until recently. I setup a wireless network in the house to do this. All was fine until 3 days ago.I use a Dell Inspiron 1545 with Windows 7. I have a Dell Wireless 1397 Minicard, a cisco router (model #2425). Since my laptop was infected by Malware, my network has not worked since. I downloaded Malwarebytes Anti Malware to get rid of it and it appeared to work. I got internet access back. However, I still cannot connect to my network (visible in the Available Network list as normal) or stream any media.Windows Media Centre also has stopped opening and gives me the small box saying 'windows is checking for a solution', then closes with nothing. I can however open WMC if I right click and 'run as administrator'?! I have disabled all other network adaptors, only the Dell minicad is enabled and also tried disabling and enabling this main one with no effect. All problems point to the fact that my laptop can no longer connect to the home network but I cant figure out why?!Another (possibly unrelated) problem is occuring at boot up where I get an error message saying 'Bluetooth Software License not found. [2]' - Again this never happened before the Malware infection.
View 1 Replies View RelatedI have bought a new laptop and added it to my home network , two pc's and two laptops all running win 7. I share all drives on all machines. I know this is not very professional but it works for me.From the new laptop I can see all the network and see all the different drive folders but can only access the user folder on any PC from the new laptop. Also I can see the drives on the new laptop but only access the new laptops user folder from any other PC. I have checked this through a LAN cable and wireless with no difference.As the other PC's can see each other as normal I can only think there's a problem with the set up in the new laptop. I also note when I first try and access any other pc from the new laptop I am asked a domain name and password , I can put anything in these boxes and get to see the network but as I said above only access the user folders. I do have password access turned of.
View 7 Replies View RelatedI split my network into 2 to make it more accessible during peak time and to minimize internet traffic. However by doing this only the first network can access our Network Access Storage, the other network can access it because the two are separated by different router and switch also the supervisor need to see both network at the same time for monitoring purposes..
View 6 Replies View Relatedi would like to know that how to stop internet access through network complete internet access
View 2 Replies View RelatedSince yesterday im unable to connect to the wireless connection in my dormsI'm able to connect but i get yellow triangle with exclamation mark in it, and it says "no internet access".In the living room im able to gain internet access, my friend also tried in my room and he was able to get internet access, he has tp-link adapter on his laptop.I have dell vostro 3500 with "DW1051 wireless-N WLAN half-mini card" as my adapter.I opened IE9 and pressed "Diagnose connection problems" and got the messege "Wireless Network connection" does not have valid IP configuration.OS: windows 7 ultimate x64
View 6 Replies View RelatedActually i have a small network of 4 and 5 computers. i am sharing internet via lan not ICS.there are some computer showing me in my network places coz i am using windows 7 and the other computers have same window. i can ping their computers by name and by ip add, which is assigned by DHCP. i can see thir MAC address. can i access their computer i mean their data or something else. i don't know that this is the right place to share such information or not.
View 14 Replies View RelatedThree PC's all Win 7. Networking/Homegroup problem. In Network RV711 can see and access RC710 & Akoya. RC710 can see and access RV711 & Akoya. Akoya can see and access RV711. Akoya can see RV711 but not access RC710. Under Network Akoya can see RC710 but “You do not have permission to access...
In Homegroup. RV711 can see and access RC710 & Akoya. RC710 can see and access RV711 & Akoya. Akoya can see and access RV711. Akoya can see RC710 but not access RC710. Under Homegroup No other homegroup computers are available. In Homegroup the identical password is displayed on each PC. The Akoya is wired, the others are wireless. Summing up the Akoya cannot access the RC710.
I am using TP-Link TL-WR740N.Now I have a problem. In side my LAN I have four different PCs listening as Telnet Server at port 23. I want to create a telnet session over Internet with one of my PCs at a time.How should I do this? I mean what IP and Port number I should use to connect to my desired PC since all of my PCs are showing same public IP and that is of my router's IP.
View 7 Replies View Relatedmy home has a wireless network, and I can get internet (wirelessly) on my PC perfectly. What I was wondering is if it would be possible for me to hook up an ethernet cable to the RJ port on my PC, and connect my PS3 to it to give me a wired internet connection on the PS3.
View 14 Replies View RelatedI have a home network that works perfectly fine on all my wireless devices except one of my laptops. I'm getting a yellow triangle with an exclamation mark inside of it in my connections map from "this computer" to the name of my wireless network. I am running windows 7 and I have no idea what is wrong. It used to work fine and just stopped all of a sudden. I'm not sure if my wife or I messed something up.
View 11 Replies View RelatedI have a home LAN. It has a Linux server with a website that I'm building. I can access the website from the LAN side, but not from the WAN side. I have port 80 open on the router and to the static IP of the server. I know the WAN IP of the router and I keep it connected so that doesn't change.From the WAN side I can access the server's Apache default web page via the IP in the URL as "http://a.b.c.d" but I can't get at the website. I tried "a.b.c.d/abc.com", "a.b.c.d/abc", and " a.b.c.d/ www.abc.com" but all I get is 404 - Not found.what is the proper URL syntax that let's me get at that website?
View 8 Replies View RelatedIf I want to access my work files and folders from home for free, what I will have to set up. I know about VPN but it costs money. I know about remote desktop also, but I don't prefer this. I just want to access files in my computer like a local network, or at least I should be able to download and view the files and folders as in FTP.
View 1 Replies View RelatedI am extremely new to network but also excited with the things you can achieve with a Cisco switch.For about 3 months I sat down looking at my "Cisco C2950-24 Switch", this surely for such a beastly looking thing it must be able to do something other than just allow you to plug in cables. So with that said I started to do some reading and watched a couple of You Tube Videos.I am on the route to complete my first goal and thats have my own VLAN setup with 1 Server and 6 clients. The Server is running ESXi therefore a few other servers are running inside it too.So my VLAN - VLANID 20 running the network 172.22.22.0. On the physical switch I have the following:Port 1 - WAN incoming connection from my Router on the network 192.168.178.0Port 2 thru 9 all running on VLAN 20.By the way I am using the GUI Cisco Network assistant
View 4 Replies View RelatedI managed to flash my router (Belkin Sharemax N300) to dd-wrt and set it up as a repeater using these steps in the wiki, but I can't access the internet via the repeater. I can still connect to it, though. I don't know that much about networking.
View 1 Replies View Relatedi live in a two story townhouse. under the stairs, there is a small closet where the modem and router are. there are also three ethernet ports, one that leads to each of the bedrooms. However, the only one that is being used is my room (my roommates dont need ethernet) so what i decided to do was run the ethernet port from the modem directly to my room and then connect the router to it using the ethernet port in my room. (my room is upstairs)
Now, this setup works great for me. I can connect my HD to the Airport and my printer via ethernet and my desktop as well. BUT ever since i moved the router upstairs to my room, the internet has been EXTREMELY slow downstairs
so this is what i was thinking, I want to get another wireless router and put it downstairs where the modem is, and use my airport Extreme as the "second" router. But, i want to use a different SSID for my airport extreme. is this possible?
I was thinking to connect the new router downstairs like normal, and disable the DHCP server on the airport extreme and change the IP address to make sure it isnt the same as the new router, then connect the new router to one of the three ethernet ports on my airport extreme.
Is that the correct way to set it up? and if i do that, would i be able to connect all my devices without a problem? (in addition to the devices mentioned earlier, i also have a second printer, a PS3, a home entertainment system, and sometimes my laptop, all connected to the airport via an ethernet switch) and lastly, will I be able to access the internet without a problem? will this slow down the internet that i get?
the reason i want to do this is because 1) I dont want any of my roommates or their guests to access my hard drive (i know, i can put a password on it. but still) and 2) if my printers are on the same network as their computers, they like to "accidentally" wirelessly print to my printers. I want to avoid that because they print. alot.
I want share my adsl internet connection to my galaxy tab and use labtop wirless as a access point. in toturials there is settings in wirless newworks tab in wirless propertice,but I cant found this tab. I installed lastest Wirless driver update and start WLAN autoconfige service. also I cant found microsoft virtual wifi in network connetions.
Intel wifi link 5100 AGN
Windows 7
I have Nas storage AirNas 350 how ro setup my network to have remote access to NAS ftp ?i have TP-LINK TL-R480T+ with two wan ports with two modems (Cabble and ADSL 2+ both with dynamic IP) also i registered on www.no-ip.com I success to go direct to ADSL modem with no-ip service but i not need that i need to access to NAS storage.Nas ftp work perfect in local network but i need remote access over tha internet. How to setup that?
View 1 Replies View RelatedCurrently I'm living in a dorm. The house has wireless network. But WEP encryption is used to secure it. I know this method is not safe. Also since there are many people are living in the house i don't want my computers be connected to this network.What i want to do is to setup my own network. I bought a NetGear DGND3300 router. I setup a WPA2 protected wireless network. I can connect all my devices to this network but naturally this way i have no Internet access.Is there a way to use Internet access of the house's router but still keep my local traffic not seen by anybody else
View 2 Replies View RelatedI'm a member of a club and we have just got BT Business Broadband with BT Business Hub 3. The club has one WiFi laptop which will occasionally access the BT Hub 3 using WiFi for internet use only. So essentially we have no network as such, just the BT Hub and a laptop.I would like to allow some club members to have internet access (WPA2 password), but without allowing access to the club laptop in any wayAs I said previously, the club laptop will only be active occasionally, so actual exposure is limited, but ideally I would like for the club laptop to be invisible to others when it is connected. I would also like each members equipment to be hidden from each other, so nobody can access each others data etc.. Can I achieve this simply? If so, do I need extra equipment?
I do have some donated equipment available: Netgear WAG102 Wireless Access Point, D-Link DSL-2640R Broadband Wireless G ADSL2+ Router and US Robotics 9106 SureConnect ADSL Wireless Gateway. Could I use any or all of these?I know this donated equipment is only Wireless G, but speed for the members is not important as they will only use internet access for emails and occasional google searches etc.I've tested the WAG102 at home, by plugging it into a LAN port of my BT HomeHub3 and giving it a different SSID, which works OK, but I can still see the other equipment connected wirelessly to my BT HomeHub3, although I cannot access my home laptop etc. because they are password protected.
Orange sent me a replacement Netgear DNG1000 and from the moment I had it there was issues, if N mode was enabled and I had to set it to B/G only for it to have a stable connection, not a problem as I only use it for the internet. The range on it was roughly the same as the livebox. For a few weeks it worked fine until recently it started to go insane, on the main computer the wifi works most of the time with 80%-95% signal strength, and then every now and then it will suddenly lose communication with the router but act as if it was connected for 5-10 minutes, signal strength is still at about 90% yet I can't access the router or the internet. Wifi works fine at full speed on the stairs, drops to a few bytes per second on the landing and then increases back up to full speed in the room next to it. In the one bedroom the wifi works up until the door where it instantly drops from full speed to a few bytes a second. This drop off point is only a few cms, as in full speed at one place, move it back a few cm and it slows down loads, but I still get 4-5 bars on windows and -50 RSSI on inSSIDer, about 94% strength and a link quality which tends to fluctuate. What could be causing this, specifically the weird instant deadzones and randomly not responding.
View 1 Replies View RelatedI know enough to be dangerous when it comes to networking, but this one has me baffled. I'm running a win 7 pc with dual nics.
I need to have 1 nic connected to a vpn and the other to be restricted to intranet access only. I can't for the life of me figure out how to accomplish this.
Once I connect 1 nic to the VPN i'm no longer visible to my lan, even if the 2nd nic is connected.
How to use my iPhone 5 using 3G or LTE to connect to my home wifi network so I can control things like my airconditioner (using the supplied app) which is also connected to the home wifi network?I have a WHS a Windows 8 machine and an XP Pro machine. I am using a Linksys WAG320N Router/Modem.
View 1 Replies View RelatedI would like to have the ability to turn off the internet access to my teens computers without effecting myself. I have parental controls on my computer which work great, but this does not work to the other computers that are able to connect wirelessly. I have a router but I am not sure how to access it.
View 3 Replies View Related