Home Network :: Internet Failing Due To Publishing Website With IWeb?
Jan 21, 2013
We have a network of over 20 devices, all kinds (windows, android, mac enz...). Everything was going well until one of the mac-users tried to publish his website that contained a movie (at first the movie was 622 MB). If this user presses publish the internet is going away. The website won't publish, waiting doesn't work. While the internet isn't working I went to another pc in the network and started some ping experiments. I can ping any device in the LAN, outside the LAN something strange happens: let's say for 6 seconds it is ok, but then it fails for lets say 20sec, again 6 sec the ping returns ok (45ms), and goes down for a longer period. Eventually it is not coming back.The mac user himself cannot access the internet either. When the publishing is stopped, the internet is back in less than a second.
This problem is recent, and it isn't the first time this user published a video on his own website, on the same host with the same application (iWeb). I asked him to publish his site to a local folder and hand it over to me, I tried to publish it to the same host using my own FTP application (FileZilla), this worked without any problem (I am on the same network). This is what we tried:
- Compressing the video (it is now 26 MB, still not working), we have 2GB space from the host, no limits on filesize.
- Publishing the website without the video's, no problem
- I turned on logging (debugging level) in the modem/router, no entries at the moment things went wrong...
- I called the provider, they claim nothing is wrong at their systems.
So, can the modem be broken? I don't think so because I can use it with far more intensive tasks without going down.One thing is clear, it shouldn't be possible for one computer to block the internet for everybody, so changes in the configuration are needed (I think).
View 13 Replies
ADVERTISEMENT
Nov 15, 2011
I've just registered with NO-IP (free account), created a host, installed the client (in CentOS) and I want to see a website I'm running locally in that computer from another computer (via internet :). How do I access it?My host is "customtrack.no-ip.org "And in that unix box I've got a published website that I can access from any browser in the following URL: [URL]When I log in to from the browser from another computer I get the following error message:
Quote:The connection was reset- The connection to the server was reset while the page was loading.The site could be temporarily unavailable or too busy. Try again in a few moments.If you are unable to load any pages, check your computer's network connection.If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
How do I tell CentOS that I want to redirect that site I'm hosting locally [URL] to [URL]? I believe that's not done automatically. How do I configure the redirection?
View 1 Replies
View Related
Aug 4, 2012
I recently moved into a new apartment, where our internet connection is shared with neighbors who are currently out of town on vacation. Most of my devices (Phone, Laptop, Girlfriend's laptop etc) will connect just fine to the passworded network we are meant to be on. My desktop however will not. It doesn't even see that it's an available wireless network.
This same computer was seeing/connecting to wireless networks as recently as this morning. It was also seeing another network for a little while with medium signal strength, which it now doesn't see either.
So far, I've restarted a couple of times, done the 'troubleshoot/repair' options on my wireless network icon, and verified that my wireless adapter is indeed on. I've also asked it to update drivers, but despite having no internet connection, it tells me it has the most current versions.
Normally, I would just reset the router as a first step, however because it's in my neighbors house, I don't have that option, however as I mentioned, this likely wouldn't make a difference, since several other devices, including the laptop I'm posting from now, are quite able to recognize and connect to the network in question.
View 1 Replies
View Related
Apr 26, 2012
I have a problem with regards to accessing our website.The access to our sites goes on and off all throughout the day.been reading to a lot of forums and suggestions but nothing seems to work for my case.[CODE]
View 1 Replies
View Related
Apr 21, 2011
can I add a server 2003 on my home wireless network (4 computers) to run a website. I am trying to redirect a AU domain to 2003 server
View 2 Replies
View Related
Nov 8, 2012
I was able to access my website jetbaby.com just fine before I changed the cPanel password. Now I cannot even load the site or load the cPanel login page here: jetbaby.com:2082 All I did was change the cPanel password. When I use another computer that is NOT on my network, I can connect to the site fine. I'm assuming that my network is blocking it for some reason after the cPanel password change. I tried the IP address in the address bar as well (still no go). Cannot "ping" the IP address either. I reset my modem and router as well. Cleared cache in browsers as well. I also disabled firewall and anti-virus for testing.
View 2 Replies
View Related
Oct 7, 2012
I have recently moved in a new apartment. At the building there is something like a centralized internet. There is a huge machine which is connected to every apartment of building via a cable modem(Netsys nh-300sp). Here is an image of system. And when I first came to apartment they gave me a username and password which I made login when i firstly opened a page on safari. When I plug in an ethernet cable to my macbook-air it connects and everything s good for a moment then it starts to kick me out randomly and continuously. When I look to Network Diagnostics: ISP is red, internet and network are yellow.I tried also using a manual DHPC address, but then ISP is green but Internet and server are red or yellow. I cant even reach to modems admin panel, maybe because of the system of building.
View 1 Replies
View Related
Oct 3, 2011
I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....)I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)
View 11 Replies
View Related
May 16, 2011
I am able to access all website except one particular website from my home network. Also, I am unable to access the same website using my ipod-touch. The website is up and running and it is not down. In order to verify, I took the laptop and ipod touch to starbucks. I was succesfull in accessing the website from starbucks using my laptop as well as my ipod-touch. Also, I tried to replace m existing router with a new router, but still the problem exists. Operating System: Windows Vista 64bit?
View 2 Replies
View Related
Feb 12, 2013
I need config mi own Cisco Router 2600 and permit to External Internet my Samsung DVR SDE-4001
View 3 Replies
View Related
Apr 19, 2013
Any confirmation that the versions 8.6 and up don't allow publishing to more then one public range if IP addresses?
We have ASA5520 version 8.4 in deployment and there I can NAT to 3 different ranges of public IP-s.
With same configuration on ASA5525-X version 8.6 it will NAT only the range that the outside interface belongs to. Also tried the 9.0 version with the same result.
View 2 Replies
View Related
Apr 3, 2012
We are going to "publish"(I don't know if this is correct word to use;)) our mail server on Cisco 2921. As far as I know it can be easily achieved with static NAT. But the thing is, we don't want to publish it on standard 443 port i.e. we want router to listen for https connections on other port than 443, and then redirect this connection to internal server with private ip.
View 1 Replies
View Related
Feb 8, 2012
i have an internet connection thrw USB from a ppp adapter from there i've made a netowrk with another computer now on the client computer from my network i have XAMP server who i want to be accessed from the internet .i have subdomain like radionis.zapto.org (192.168.0.2) registered at no-ip.org.now what IP i have to introduce there to make my server accessible
View 2 Replies
View Related
Jun 30, 2011
I have been using a laptop to stream videos through my xbox for over 2years until recently. I setup a wireless network in the house to do this. All was fine until 3 days ago.I use a Dell Inspiron 1545 with Windows 7. I have a Dell Wireless 1397 Minicard, a cisco router (model #2425). Since my laptop was infected by Malware, my network has not worked since. I downloaded Malwarebytes Anti Malware to get rid of it and it appeared to work. I got internet access back. However, I still cannot connect to my network (visible in the Available Network list as normal) or stream any media.Windows Media Centre also has stopped opening and gives me the small box saying 'windows is checking for a solution', then closes with nothing. I can however open WMC if I right click and 'run as administrator'?! I have disabled all other network adaptors, only the Dell minicad is enabled and also tried disabling and enabling this main one with no effect. All problems point to the fact that my laptop can no longer connect to the home network but I cant figure out why?!Another (possibly unrelated) problem is occuring at boot up where I get an error message saying 'Bluetooth Software License not found. [2]' - Again this never happened before the Malware infection.
View 1 Replies
View Related
Dec 16, 2012
For everybody else in the house the internet works fine on their devices, however, on my laptop and ipod it will often not allow me to connect for ages, but then finally connecting (without me changing anything)
View 3 Replies
View Related
Nov 6, 2012
To start off with, I own the network, and every system connected to it. I run and admin it, so the chances that anyone else has changed anything is essentially zero.This computer has a wired network connection (The issue) and a wireless one. They are connected to two separate networks. A few days ago the wired card stopped getting an IP address from my router, always ended up with a 169 address. Eventually I just disabled it, and installed a PCI network card.
Now what happens is that all works fine for a while, then stops. Suddenly I am "Not connected to network" despite the fact my ip address hasn't changed. I run the network troubleshooter, it tells me the "Gateway is unreachable" Resets the network card, and all is good. Then after a while the network fails again. I did already scan with malwarebytes, and everything is fine as fat as its concerned.
View 4 Replies
View Related
Nov 24, 2011
I'm trying to transfer files from my wired desktop to my wireless laptop, and smaller files seem to transfer okay. Whenever I try to transfer a really large file, however, the internet and connectivity totally drops on my desktop (which is giving the file) and causes the laptop to lose the file. The desktop computer stays offline for about 1-2 minutes afterward before it either starts up again on its own or I reset the network adapter. I suppose it's important to note as well that the file transfer can fail at the very beginning, in the middle, or even at the very end, but my desktop computer always loses its connection whenever the interruption happens... but sometimes it can successfully get almost all the way through the file transferI tried following some of the steps in this case to confirm that I can ping and do all that jazz to my laptop and all of the services are running, since our problems seem similar. I've disabled all firewalls as well. However, since one computer is actually wired to the router, I don't think the solution will be quite the same
View 13 Replies
View Related
May 12, 2012
So I keep running into an issue with my internet connection. My router and connection work no problem, until I try to update my video card drivers or even my tablet drivers. Once I install those drivers, The next boot up my computer has no internet connection, and it says the network driver has failed. I can't seem to recover internet connection until I do a system restore, then all is well. My netgear WGR614v10 is up to date, on factory settings.
View 2 Replies
View Related
Jul 24, 2011
The connection of the computer before is activating.. after how many days of using,it losses the internet connection.. what is the possible reason for this?
View 1 Replies
View Related
Feb 24, 2013
I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
View 5 Replies
View Related
Sep 8, 2011
Since yesterday im unable to connect to the wireless connection in my dormsI'm able to connect but i get yellow triangle with exclamation mark in it, and it says "no internet access".In the living room im able to gain internet access, my friend also tried in my room and he was able to get internet access, he has tp-link adapter on his laptop.I have dell vostro 3500 with "DW1051 wireless-N WLAN half-mini card" as my adapter.I opened IE9 and pressed "Diagnose connection problems" and got the messege "Wireless Network connection" does not have valid IP configuration.OS: windows 7 ultimate x64
View 6 Replies
View Related
Sep 19, 2011
i have 2 system in same network connected in same switch sys-1 have internet access & sys-2 no internet blocked from fire wall,....Now i want to use internet on sys-2 through sys-1 without Proxy or lancard sharing...
View 3 Replies
View Related
Jun 28, 2011
I have one lan with several PC's and static IPs 192.168.0.x 255.255.255.0 and 2 routers. One is 192.168.0.1 and the oter 192.168.0.11. I want every PC gets internet from gateway 192.168.0.11 and the other connection is set with static public IP for incoming Terminal Server Clients. The router for that connection, 192.168.0.1 has NAT setup for several ports which redirect traffic to 3 different computers. But the traffic is not redirected while those PC have the first gateway for internet (.11). To keep NAT working these 3 PC get internet from 192.168.0.1 but I don't want any computer to go out through that router.
What can I do to give internet through router .11 and send traffic to 3 of them from the other router .1 from internet to the lan?
View 5 Replies
View Related
Feb 16, 2011
If this is the wrong thread for this pasted config, I am sorry. Let me know and I will delete it and move it else where. I just cannot seem to connect my Cisco 2651xm router to the internet from my PC. Here is the output of my config. I have Cox Cable Internet and my IP address is Dynamic but it has lukily stayed "static" if you will since I can remember am plugging in my laptop via straight-through to 2950 switch port fa0/2 and fa0/1 is connected via staright through calbe to router fa0/0. I told my PC to "obtain IP address automatically" since I made my router a DHCP server, but still no internet. I can however, ping the ISP 24.253.136.243, my default-gatewat on the router, 192.168.0.1, and I made a the vative vlan 192.168.0.2 and I can ping all interfaces fine and packets are being sent and received[CODE]
View 19 Replies
View Related
Sep 19, 2011
I have an internet connection of 100.0mbps and have two pc connected to it sharing internet connection but the other pc can't connect to internet when the other one is connected? how can i i fix it?
View 16 Replies
View Related
Jun 25, 2011
I'll try and explain this the best that I can. I'm currently running a Sony Vaio VGN-NW270F laptop with Windows 7. I'm using a WRT54G2 v1.5 router for my internet connection. Last Wednesday, I tried to go online, but my wireless connection for my home network came up as "limited connectivity", even though there was a 5-bar signal strength. Since then, it has identified and connected to my home network, but displays "no internet". On startup, however, it connects, but then promptly disconnects, and I experience the same issue. I can go online using my parents' laptop, my 3DS, and my Wii, so I assume it's an issue with my computer rather than my router.
Additionally, I have tried using an ethernet cord to go directly into my computer - no luck.I have also done 2 system restores to late May - still no luck.I have uninstalled/reinstalled the necessary drivers - no luck.The only thing out of the ordinary that may have contributed to this situation is that on the day when I started having this problem, a notification saying that my parents' computer's IP address was the same as another on the same network. I have NO idea what that means, nor do I know how it happened, or how to resolve it, if needed
View 6 Replies
View Related
Mar 12, 2012
Two laptops (Vista) connect to wireless router.Wireless printer is also connected to wireless router.Desktop has colour printer attaced to it.I want to connect the desktop (XP) to the wireless router so the laptops can print to the colour printer, and the laptops can open shared files on the desktop, but don't want the desktop to be able to connect to the rest of the world.
View 2 Replies
View Related
Jul 10, 2011
i am using the home network in here all system have a internet but i am want only one system using the internet in hole network How i am change
View 2 Replies
View Related
Apr 19, 2012
My wireless internet connection on my laptop. The connection seems to work fine on other laptops in the flat. It works on mine too. Then after a short time the internet connection fails and the laptop says it's unable to connect to preffered wireless network, and unable to detect any wireless networks (usually there are others around too).The amount of time before this happens seems to be getting less. I have cheched that the radio switch on the side of the laptop is on.
View 5 Replies
View Related
Jan 13, 2012
I am trying to set up a network with my modem (Speedtouch 546T2) and router (Jensen AirLink 89300), but it won't work. No network connection on the laptop (Toshiba) nor the MacBook.Ipconfig /all (when "connected" wireless) on the laptop:In Norwegian, just ask for translation if needed. Don't think it'll be necessary however.
Quote:
Microsoft Windows [Versjon 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. Med enerett.
C:Windowssystem32>ipconfig /all
Windows IP-konfigurasjon
[code]....
I have updated the router's firmware. Reset both the modem and router as well.
View 5 Replies
View Related
Mar 6, 2012
I have fitted a thomson router to my desktop coputer using an ethernet cable and all is working fine. My Sony Vaio laptop recognises the wireless connection but fails to connect at the acquiring network address. I have been into the properties section of the network connection page and am only allowed 8 characters for the network key. But the Network key on the bottom of the modem is longer than 8 digits.
View 1 Replies
View Related
Feb 22, 2011
2950s work fine when upgrading the IOS using CNA. On all 2960s I get Failed to execute the command archive download-sw /overwrite /http iosFile
If I run the command using telnet and tftp server it works fine.
I have tried by deleting the old image then trying upgrade using CNA, but no luck
View 1 Replies
View Related
Jan 26, 2012
i would like to know that how to stop internet access through network complete internet access
View 2 Replies
View Related