Network Setup Failing (Speedtouch / AirLink 89300)
Jan 13, 2012
I am trying to set up a network with my modem (Speedtouch 546T2) and router (Jensen AirLink 89300), but it won't work. No network connection on the laptop (Toshiba) nor the MacBook.Ipconfig /all (when "connected" wireless) on the laptop:In Norwegian, just ask for translation if needed. Don't think it'll be necessary however.
Quote:
Microsoft Windows [Versjon 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. Med enerett.
C:Windowssystem32>ipconfig /all
Windows IP-konfigurasjon
[code]....
I have updated the router's firmware. Reset both the modem and router as well.
View 5 Replies
ADVERTISEMENT
Dec 2, 2012
I have a desktop PC using Windows 7 Pro. and a Airlink N 150 Mini USB wireless adapter. My 2Wire modem/router from AT&T was failing to stay connected and was replaced today with a Netgear 7550 modem/router from AT&T. I installed the Netgear 7550 and am able to access the internet with my Asus Laptop, my LG Thrill phone, and my Samsung Galaxy 2 tablet with no problems. However, my Desktop cannot connect to the internet and the Window Network diagnostics returned the following message: Network Connection doesn't have a valid IP configuration. How do I go about connecting my desktop to the Netgear modem/router so that I have access to the internet? By the way I am able to connect to the internet using an ethernet cable and a LAN connection.
View 1 Replies
View Related
Jul 14, 2012
I have a thomson speedtouch ST585 router hooked up to my DSL line. I am trying to replace the wifi AP of the thomson with my linksys router (running dd-wrt). So far I have connected the linksys router (from the internet port) to the thomson router, and turned the thomson's wifi off. But, now I can't connect to the internet though the linksys router...I have tried disabling DHCP with no success?
Update:I can now connect to the internet through the linksys router, the problem now is that I cannot access the linksys's routers setup page. I can access the speedtouch's though.[URL] I would like to be able to manage all the forwarding (and the ip's) though the linksys router NOT the thomson (I want to make the linksys router the core router). I just need the thomson for my DSL line, I don't want it to do anything else but provide internet to the linksys router.
View 7 Replies
View Related
May 9, 2010
I am trying to configure the ACS with AD in the identity store but am running into the following issue.I enter the AD Domain Name and username and password and hit the 'Test Connection' button and receive a DNS error stating that it 'Cannot resolve network address'.I have logged into the CLI and test to the domain name from there and it works fine.
View 5 Replies
View Related
Feb 5, 2011
Could you find wpa2 of the airlink 101 super g wireless router for me?
View 1 Replies
View Related
Jan 23, 2011
I have a problem that Ive tried to fix but it seems impossible..I have a router : Airlink 59300 (recently bought for 102 dollars) and the problem occures when I play online games, I get 1-2 sec disconnect and that is enough to kick me out. Ive tried to ping my connection to www.google.com and my ping jmped randomly very high (up to 800 ms) then dropped to normal (25 -30 ms)I think that is the problem.When I directly plug in the cabel from modem I dont have any issues.Here is what I get when logging into router on website:[CODE]
View 1 Replies
View Related
Feb 1, 2012
I have an Airlink wireless Adapter and Window 7 on my computer. Why does it keeps disconnecting?
View 1 Replies
View Related
Feb 5, 2011
Could you give me the WPA2 of the Airlink 101 wireless router?
View 2 Replies
View Related
Oct 7, 2012
I have recently moved in a new apartment. At the building there is something like a centralized internet. There is a huge machine which is connected to every apartment of building via a cable modem(Netsys nh-300sp). Here is an image of system. And when I first came to apartment they gave me a username and password which I made login when i firstly opened a page on safari. When I plug in an ethernet cable to my macbook-air it connects and everything s good for a moment then it starts to kick me out randomly and continuously. When I look to Network Diagnostics: ISP is red, internet and network are yellow.I tried also using a manual DHPC address, but then ISP is green but Internet and server are red or yellow. I cant even reach to modems admin panel, maybe because of the system of building.
View 1 Replies
View Related
Nov 6, 2012
To start off with, I own the network, and every system connected to it. I run and admin it, so the chances that anyone else has changed anything is essentially zero.This computer has a wired network connection (The issue) and a wireless one. They are connected to two separate networks. A few days ago the wired card stopped getting an IP address from my router, always ended up with a 169 address. Eventually I just disabled it, and installed a PCI network card.
Now what happens is that all works fine for a while, then stops. Suddenly I am "Not connected to network" despite the fact my ip address hasn't changed. I run the network troubleshooter, it tells me the "Gateway is unreachable" Resets the network card, and all is good. Then after a while the network fails again. I did already scan with malwarebytes, and everything is fine as fat as its concerned.
View 4 Replies
View Related
Nov 24, 2011
I'm trying to transfer files from my wired desktop to my wireless laptop, and smaller files seem to transfer okay. Whenever I try to transfer a really large file, however, the internet and connectivity totally drops on my desktop (which is giving the file) and causes the laptop to lose the file. The desktop computer stays offline for about 1-2 minutes afterward before it either starts up again on its own or I reset the network adapter. I suppose it's important to note as well that the file transfer can fail at the very beginning, in the middle, or even at the very end, but my desktop computer always loses its connection whenever the interruption happens... but sometimes it can successfully get almost all the way through the file transferI tried following some of the steps in this case to confirm that I can ping and do all that jazz to my laptop and all of the services are running, since our problems seem similar. I've disabled all firewalls as well. However, since one computer is actually wired to the router, I don't think the solution will be quite the same
View 13 Replies
View Related
May 12, 2012
So I keep running into an issue with my internet connection. My router and connection work no problem, until I try to update my video card drivers or even my tablet drivers. Once I install those drivers, The next boot up my computer has no internet connection, and it says the network driver has failed. I can't seem to recover internet connection until I do a system restore, then all is well. My netgear WGR614v10 is up to date, on factory settings.
View 2 Replies
View Related
Aug 4, 2012
I recently moved into a new apartment, where our internet connection is shared with neighbors who are currently out of town on vacation. Most of my devices (Phone, Laptop, Girlfriend's laptop etc) will connect just fine to the passworded network we are meant to be on. My desktop however will not. It doesn't even see that it's an available wireless network.
This same computer was seeing/connecting to wireless networks as recently as this morning. It was also seeing another network for a little while with medium signal strength, which it now doesn't see either.
So far, I've restarted a couple of times, done the 'troubleshoot/repair' options on my wireless network icon, and verified that my wireless adapter is indeed on. I've also asked it to update drivers, but despite having no internet connection, it tells me it has the most current versions.
Normally, I would just reset the router as a first step, however because it's in my neighbors house, I don't have that option, however as I mentioned, this likely wouldn't make a difference, since several other devices, including the laptop I'm posting from now, are quite able to recognize and connect to the network in question.
View 1 Replies
View Related
Apr 28, 2013
In my own home just testing my E1000 works fine as an access point with an E3500 as primary router using Linksys:
method 1 (lan-lan connection) with E1000 IP reset to 192.168.1.2 and DHCP off and with
method 2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
In my daughters building where I need it, I cannot get the E1000 to work as an access point. The primary router is an Airlink AR675W with ip 192.168.0.1 (255.255.255.0) delivering addresses 100 to 150.
When i try the E1000 in either method I get no internet connection on devices connected hardwired or wirelessly to the E1000. Before each setup I used the reset button and the factory defaults tab
method1 (lan-lan) I set the E1000 to IP 192.168.0.2 to be different than the Airlink and DHCP off.
method2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
Why I cannot connect to the internet in this way behind the Airlink primary router.
View 4 Replies
View Related
Apr 19, 2012
My wireless internet connection on my laptop. The connection seems to work fine on other laptops in the flat. It works on mine too. Then after a short time the internet connection fails and the laptop says it's unable to connect to preffered wireless network, and unable to detect any wireless networks (usually there are others around too).The amount of time before this happens seems to be getting less. I have cheched that the radio switch on the side of the laptop is on.
View 5 Replies
View Related
Mar 6, 2012
I have fitted a thomson router to my desktop coputer using an ethernet cable and all is working fine. My Sony Vaio laptop recognises the wireless connection but fails to connect at the acquiring network address. I have been into the properties section of the network connection page and am only allowed 8 characters for the network key. But the Network key on the bottom of the modem is longer than 8 digits.
View 1 Replies
View Related
Feb 22, 2011
2950s work fine when upgrading the IOS using CNA. On all 2960s I get Failed to execute the command archive download-sw /overwrite /http iosFile
If I run the command using telnet and tftp server it works fine.
I have tried by deleting the old image then trying upgrade using CNA, but no luck
View 1 Replies
View Related
Aug 12, 2011
I've noticed recently that my laptop keeps disconnecting from the internet via my router (Thompson Speedtouch ST585v6sl.)The light on the router that shows the connection turns red or sometimes it doesnt light up. However all the other lights stay on, it's just the internet light.It only happens for around 5-10 minutes and then after troubleshooting, disconnecting and reconnecting it's back up.I've scanned my computer for viruses and malware and nothing has come up, this is happening reguarly now about every 30-45 minutes when i'm on my pc.
View 3 Replies
View Related
Apr 24, 2011
I currently have a Thomson speedtouch router that i have yet to connect to my pc as i am waiting for the adaptor for it.I use AOL adsl line aol have goiven me instructions to connect the router to my PS3 either wireless or ethernet cable.I go through all the instructins but when i finally check connection it finds ip address but the internet connection has failed ie timed out 80028E02?
View 1 Replies
View Related
Jan 21, 2013
We have a network of over 20 devices, all kinds (windows, android, mac enz...). Everything was going well until one of the mac-users tried to publish his website that contained a movie (at first the movie was 622 MB). If this user presses publish the internet is going away. The website won't publish, waiting doesn't work. While the internet isn't working I went to another pc in the network and started some ping experiments. I can ping any device in the LAN, outside the LAN something strange happens: let's say for 6 seconds it is ok, but then it fails for lets say 20sec, again 6 sec the ping returns ok (45ms), and goes down for a longer period. Eventually it is not coming back.The mac user himself cannot access the internet either. When the publishing is stopped, the internet is back in less than a second.
This problem is recent, and it isn't the first time this user published a video on his own website, on the same host with the same application (iWeb). I asked him to publish his site to a local folder and hand it over to me, I tried to publish it to the same host using my own FTP application (FileZilla), this worked without any problem (I am on the same network). This is what we tried:
- Compressing the video (it is now 26 MB, still not working), we have 2GB space from the host, no limits on filesize.
- Publishing the website without the video's, no problem
- I turned on logging (debugging level) in the modem/router, no entries at the moment things went wrong...
- I called the provider, they claim nothing is wrong at their systems.
So, can the modem be broken? I don't think so because I can use it with far more intensive tasks without going down.One thing is clear, it shouldn't be possible for one computer to block the internet for everybody, so changes in the configuration are needed (I think).
View 13 Replies
View Related
Jan 12, 2013
my general internet connectivity with my e4200.I have a new but similar problem today with the same router.After powering down equipment and moving it around, my wired connections all error. Error in that they will not get an IP address nor will they connect to the internet or each other.My wireless connections still work flawlessly.
I tried powering down the devices over night (to avoid any heating issues) and then powering up but the results are the same. I am obviously missing something, and don't really want to start my network from scratch again...
View 5 Replies
View Related
Dec 16, 2012
install a new N600 Wireless Dual Band Gigabit ADSL2+ Modem Router - Model DGND3700, to replace a Thompson Speedtouch USB Modem.
PC Windows XP Home Premium Media addition - Main PC X2 Laptops Win7 & Vista - fully working on wireless no issues.
I have managed to get two laptops working wirelessly with no problems, my main problem is the master pc needs to be able to use this router as well, but I cannot get it to work via the Ethernet cable!! I can get to to the Routers config page, I have done the following:
unplugged and removed the speedtouch modem, the old dial up connection is still available on the pc along with the speedtouch software and driver, I left this in place just in case the pc needs to revert back to the speedtouch modem, if I am unable to resolve this issue.
I have set the ip address on the PC to static and input the relavent Subnet and Gateway I can ping the Routers address 192.168.0.1 even though I have reserved the PC's Mac address and IP Adress I am unable to get to the internet. I have tried setting up a new internet connection via windows wizard.
when i look into the nework connections section in windows the local area connection is 100mb and there seems to be another connection which looks like another internet connection this indicates I am connected however I still cannot get an actual google session running.
View 1 Replies
View Related
Nov 5, 2011
i have a LAN network between several pc's connected with several switch's and connected to Thomson SpeedTouch 510 DSL Router its ip address is 10.0.0.100 subnet 255.0.0.0 and the router dont give auto ip to the PCs i have to issign it manually to the PCs "static ip".I bought the acer android recently so i bought a tp-link td-w8901g wireless router to act as an access point so i connected the 2 routers to each other by LAN and gave the tp-link an ip address 10.0.0.12 subnet mask 255.0.0.0 so it will be the same ip range of the speedtouch and setuped the tp-link router to fit my isp configeration it worked at first but i had to reset the router so i did the same configuration i did before but didnt work and i cant access the internet using the android or the wireless but when i connect the phone to the tp-link and unplug the speedtouch the wireless works so theres no any problem with the router?
View 1 Replies
View Related
Apr 4, 2012
My Speedtouch 516v6 modem does'nt provide gateway adress to the TP-Link router. The modem can work in bridged mode or routed mode and I want to use routed mode. TP-Link has PPPoE mode but I would like to use a dynamicIP mode in which the router obtain network parameters from the modem and it does, but it does not obtain a gateway address.
View 2 Replies
View Related
Nov 8, 2011
Five months ago we moved into a new apartment, and connected up our broadband; the ISP provides a Thomson Speedtouch modem (ST546 v6), which I understand from Tech Support is running software v4 (it was issued with V5, but rolled back to V4 for stability issues).We prefer a WiFi network, so purchased a Belkin N Wireless Modem Router (F5D8636-4 v2); I connected it up ditching the ISP issued modem, and all worked well for four months. Suddenly it refused to see the ADSL connection - orange light flashing.So after four nights of 'fault resolution' with Belkin, they decided to send me a replacement... which I finally received last night. It didn't work - same problem, flashing orange light.I have the correct user name and password for the ISP - checked it not once, not twice, but four times. The Thomson Speedtouch works, but doesn't provide a WiFi environment. Can I connect the Belkin modem router into the back of the Thomson and transmitt/carry the WiFi signal that way, and if so, how? I tried (the obvious to me) plug a ethernet cable from the Thomson modem into the Belkin, but nothing.. I'm guessing there are a few important steps I missed.
View 3 Replies
View Related
Oct 11, 2011
I'm trying to create a VPN through a Cisco 861 but the problem is that the ISP forces me to use a SpeedTouch gateway ( as they use the MAC address for the authentication).By now, i'm getting OK pinging from client to 192.168.254.1, but I can't reach Internet.If I connect the client directly to the Speedtouch internet works properly. [code]
View 1 Replies
View Related
Mar 6, 2012
My parents are using a speedtouch 546 modem for their wired internet connection, but they would like wireles in their home. I therefore bought them a linksys e1200, and tried to get their wireless internet working.
I connected the e1200 to the speedtouch via kabel, used the cisco software to install the wifi network, and so far so good. The laptop has no problem connecting to the e1200, but no internet connection, whatever I do.
There seems to be a signal comming into the back of the e1200, since the led on both the speedtouch and the e1200 are responding, indicating that the two are sharing some information.
Looking for information on the net, I came onto 3 possible solutions.
One is cloning the MAC adress of the to the speedtouch connected wired computer to the e1200. The second has something to do with interfering IP adress ranges. The third was uninstalling the cisco software, reconnecting and resetting the modem. Let windows find the hardware and just install the e1200 drivers.
View 2 Replies
View Related
Feb 13, 2011
I want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..
View 4 Replies
View Related
Jun 28, 2012
i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
View 6 Replies
View Related
Dec 13, 2011
I am having problems setting up a network, recently bought a used linksys router and had to restore to default settings. Now I am trying to set it up but I cant go to the ip 192.168... it times out, but when I go online and do the same thing I get a FW-1 at checky: Access denied. error. This is obviously my first time setting up a network using a router. what am I doing wrong? I checked drivers and I have tried plugging the cat5 into both internet and the 1st and 3rd port with little success, either a timed out connection or an error.
View 9 Replies
View Related
Dec 4, 2012
I set up a connection from a laptop (Windows 7) that goes through a LAN proxy server to a secure ftp server (Windows Server 2003).The sftp server is assigned a public ip address.I opened the firewall at the destination and allowed port 22 traffic to the sftp server. Well, the connection is failing.I know for a fact the connection from the client laptop is making it to the sftp server.If I issue this command on the client laptop:
telnet sftpserver 22
The DOS screen clears and tells me the type of SSH server I'm connecting to. While this connection is still active, I logged into the destination sftp server and did a netstat command. I can see the address of the proxy server in the "Foreign Address" column of the netstat results. I also can see the proxy server address when I look at the Application Log on the sftp server, so I know the connection is making it to the sftp server.
I beleive the problem is the control port (return traffic) from the server back to the client. Something is being blocked or is misconfigured. I always thought the router negotiated the control port, and that the control port didn't need to be put into any firewalls.
View 1 Replies
View Related
Dec 16, 2012
For everybody else in the house the internet works fine on their devices, however, on my laptop and ipod it will often not allow me to connect for ages, but then finally connecting (without me changing anything)
View 3 Replies
View Related
Oct 18, 2011
I am able to use the lap top but not my desk PC.Browser keeps "failing" to recognize the DNS ? or my ports are blocked by a previous firewall ?
View 19 Replies
View Related
