Find Wpa2 Of The Airlink 101 Wireless?
Feb 5, 2011Could you find wpa2 of the airlink 101 super g wireless router for me?
View 1 Replies
ADVERTISEMENT
Find The WPA2 Of The Airlink 101 Wireless Router?
Feb 5, 2011Could you give me the WPA2 of the Airlink 101 wireless router?
View 2 Replies View RelatedWPA2 Won't Find LAN Computers?
Sep 21, 2012My WPA2-Personal wi-fi connection doesn't find any wired computers to my dsl router. I am having 5 computer in my network, 2 wired 3 wireless. When I switch back to WEP everything is fine tho but then I am loosing the n standard connection. My router is "Linksys Wireless ADSL2+ Gateway".
View 1 Replies View RelatedCan't Find WPA2 Pass Phrase For Linksys Router
Oct 31, 2011I bought a XBOX for my grandson and want to connect it to the internet for him. It wont connect without a WPA2 pass phrase. I tried entering 192.168.1.1 to access the router but it wont go though. I contacted Linksys and of course they said my router needed to be reconfigured at a cost.
View 4 Replies View RelatedAirlink Wireless Adapter On Computer Keeps Disconnecting
Feb 1, 2012I have an Airlink wireless Adapter and Window 7 on my computer. Why does it keeps disconnecting?
View 1 Replies View RelatedAirlink N 150 Mini - Wireless Network Connection Doesn't Have A Valid IP Configuration
Dec 2, 2012I have a desktop PC using Windows 7 Pro. and a Airlink N 150 Mini USB wireless adapter. My 2Wire modem/router from AT&T was failing to stay connected and was replaced today with a Netgear 7550 modem/router from AT&T. I installed the Netgear 7550 and am able to access the internet with my Asus Laptop, my LG Thrill phone, and my Samsung Galaxy 2 tablet with no problems. However, my Desktop cannot connect to the internet and the Window Network diagnostics returned the following message: Network Connection doesn't have a valid IP configuration. How do I go about connecting my desktop to the Netgear modem/router so that I have access to the internet? By the way I am able to connect to the internet using an ethernet cable and a LAN connection.
View 1 Replies View RelatedLinksys Wireless Router :: E1000 - Access Point Behind Airlink AR675W
Apr 28, 2013In my own home just testing my E1000 works fine as an access point with an E3500 as primary router using Linksys:
method 1 (lan-lan connection) with E1000 IP reset to 192.168.1.2 and DHCP off and with
method 2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
In my daughters building where I need it, I cannot get the E1000 to work as an access point. The primary router is an Airlink AR675W with ip 192.168.0.1 (255.255.255.0) delivering addresses 100 to 150.
When i try the E1000 in either method I get no internet connection on devices connected hardwired or wirelessly to the E1000. Before each setup I used the reset button and the factory defaults tab
method1 (lan-lan) I set the E1000 to IP 192.168.0.2 to be different than the Airlink and DHCP off.
method2 (lan-wan) with E1000 IP reset to 192.168.2.1 and DHCP On and different wireless SSID.
Why I cannot connect to the internet in this way behind the Airlink primary router.
Airlink 59300 Router Randomly Disconnects?
Jan 23, 2011I have a problem that Ive tried to fix but it seems impossible..I have a router : Airlink 59300 (recently bought for 102 dollars) and the problem occures when I play online games, I get 1-2 sec disconnect and that is enough to kick me out. Ive tried to ping my connection to www.google.com and my ping jmped randomly very high (up to 800 ms) then dropped to normal (25 -30 ms)I think that is the problem.When I directly plug in the cabel from modem I dont have any issues.Here is what I get when logging into router on website:[CODE]
View 1 Replies View RelatedNetwork Setup Failing (Speedtouch / AirLink 89300)
Jan 13, 2012I am trying to set up a network with my modem (Speedtouch 546T2) and router (Jensen AirLink 89300), but it won't work. No network connection on the laptop (Toshiba) nor the MacBook.Ipconfig /all (when "connected" wireless) on the laptop:In Norwegian, just ask for translation if needed. Don't think it'll be necessary however.
Quote:
Microsoft Windows [Versjon 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. Med enerett.
C:Windowssystem32>ipconfig /all
Windows IP-konfigurasjon
[code]....
I have updated the router's firmware. Reset both the modem and router as well.
How To Have Wireless Network Secure Using WPA2
Jul 22, 2011Is there anyway to have my wireless network secure on an WPA2? I am sharing with my landlords network. Everytime I try to create a 14 digit password it disables my connection. Does my landlord have to create a password or can I just do it myself?
View 1 Replies View RelatedWhat Is Wireless Internet Wpa2 Password
Feb 3, 2013what is my wireless internet wpa2 password.
View 1 Replies View RelatedCisco Wireless :: WPA2-PSK AES On 1231G
Apr 13, 2010How to get the 1231g to work with WPA2-PSK (AES). My laptops cannot authenticate using this config but connect fine to the 1242AG. Below are some of the specifics:
1231G
Radio Type: AIR-MP31G
IOS Ver: 12.3(8) JED
Multiple SSID
Encryption: AES
Key Management: Mandatory WPA
*Laptops can connect to SSID with WEP
Laptop Won't Connect To Any Encrypted WPA2 Wireless?
Jan 13, 2012This is a 5-year-oldish Gateway MX-6124 laptop running under Win XP 2002, SP3. I'm using SureWest DSL, with an ISP-supplied ComTrend NexusLink 5631 Modem/Router. The router is set up as a Secure Network, using WPA encryption. The laptop wireless operation light toggles off/on correctly using Fn-F2 control keys.I can connect to an open or non-secured wireless router, & have verified that at my church, at the Public Library, and at Starbucks. However, I cannot successfully connect to a passworded secured wireless source. I tried to use a secured network connection at my church yesterday, and could not connect. It "tries & tries" and eventually gives up and displays a cannot-connect type of message.
The laptop has worked correctly for several years on my home wireless network. It only stopped working about 3 or 4 weeks ago. I cannot recall changing anything in setup; I probably did it accidentally.I've spent about 2 hours in a couple of sessions with SureWest tech support. They diagnosed router setup using direct connect to the router, plus they talked me through several attempts at configuring the wireless config setup on the laptop. Everything I reported to them on the config settings appeared to be just fine. They also deduced that the wireless config on the desktop & router was correct.SureWest techs finally concluded that something was wrong with my laptop software config or the hardware, disabling it from making a encrypted connection. That sounds right to me, now having witnessed the secured connection failure described above, at my church wireless site.
I've looked at all the refs & things I can think of, plus followed step-by-step directions a couple of times with the SureWest techs. They rightfully pointed out that they could not make a tech support repair call on what did not appear to be a SureWest-related problem.I can easily make screenshots of any config screens needed on the laptop & upload to this forum.
Cisco Wireless :: WPA2 On Aironet 1242AG
Mar 9, 2012I am in the process of moving our office and part of the task involves relocating our existing wireless access points. They are all 1242AG's running the c1240-k9w7-mx.124-10b.JDA3 IOS. I would like to change the security on the access points to WPA 2 but that selection is not available. I think upgrading the IOS will solve this problem but I am not sure. So I guess I have two questions:
1) Does this Cisco model support WPA 2 ?
2) If so what IOS do I need to load to make WPA 2 available?
Cisco Wireless :: AP541N Bridge With WPA2
Aug 23, 2010I purchased quite a few of these APs as they listed the ability to function in WPA2-PSK mode, but on initial configuration I see that this may only apply to standard AP mode? Is there any way to configure WPA2-PSK on an AP541 to AP541 bridge? Unfortunately, this is a must have for our client. If not, what would allow for this with an external antenna port?
View 4 Replies View RelatedCisco Wireless :: 1310 Ap WPA2 Configuration
Jul 26, 2011I am looking for an example configuration of a Cisco 1310 running 123-7.JA2 Z Ios, for Wpa2 using an external Cisco acs radius server.
View 3 Replies View RelatedNo Real Security With WPA2-PSK Wireless Network
May 11, 2012I had assumed it was quite difficult or at least time consuming for anyone to break into a password protected WPA2-PSK encrypted wireless network. I'm still a novice or a learner when it comes to computer networking, so I realized this could be untrue.
Some days ago, my 9 year old nephew visited my parent's home where I had set up a WPA2-PSK encrypted network with what I know to be a strong password for both the router and the security phrase.
When I arrived back to my parent's home, I found out that my nephew was some how able to use the password encrypted network. There was no way he could have known the network password himself. I don't mind if my nephew uses our network, but it shows there are serious holes in the security of a WPA wireless network if he was able to bypass the password.
My parent's later told me that while I was away, my nephew was unable to connect to the network, and so used his cell phone and called his father (my brother-in-law). In just a short of time, my brother-in-law explained to my nephew how to bypass the password on our wireless network and use the internet. My parent's are not too happy about what happened and did not realize what my nephew and brother-in-law were doing at the time.
No matter what password is used to protect the network and no matter how complicated, my brother-in-law uses some type of technique to bypass them. And as demonstrated by the story above, he even uses his own children to bypass our network security.
I would greatly appreciate if some users could instruct me on how to better secure my parent's WPA-PSK2 network from this criminal to prevent the breaching from happening again. And if he was able to break through, then I'm guessing it really isn't too difficult for others to breach the security of a WPA-PSK2 network either.
Cisco Wireless :: 2106 - WPA2 Key Exchange
Oct 23, 2011I have a problem with Cisco WLC 2106 (SW: 7.0.98.0) and LAP1262. The client roams to new AP, associates with the new AP and authentication (WPA2 with EAP-TLS) runs fine until WPA2 key exchange.
The first WPA2-Key-paket from AP (1 / 4) is sent twice. On a closer look at those packets with Wire shark, i've found out the first is encapsulated into a 11n-frame (A-MSDU). The resent frame isn't. This figure shows the first WPA-Key-packet:
The next figure shows the 2nd key-packet, without 11n-encapsulation: The problem, that occurs a very long roaming-time with about 5 seconds. As you can see on second figure, the second wpa-key is sent 5 seconds after the first.
Some details:
Client: Tablet PC with Intel 6230 agn
Controller: Cisco WLC 2106
AP: LAP 1262
Controller SW: 7.0.98.0
Encryption: WPA2-AES
Authentication: EAP-TLS
This problem occurs just on 5-GHz interface with 40 MHz channel bandwidth.
Getnet GN-621u Wireless Adapter - Can't Connect With WPA2-PSK (AES)
May 7, 2011I've a Windows 2008 R2 install. I have a getnet GN-621u wireless adapter. I can connect with no encryption to my wireless router bu with wpa2-psk(aes) it fails. I have a laptop with win 7 on 64-bit and it can connect with the same wireless adapter with encryption enabled no problems. I'm guessing its MS's awesome server/workstation compatibility (not) getting in the way and this card simply doesn't work too well on the server environment. (its just a "workstation" that i'm using to develop sharepoint apps),
View 3 Replies View RelatedLinksys Wireless Router :: Set WRT330N To WPA2 Security?
Nov 16, 2011I have a Linksys WRT330N router running firmware version v1.00.3.It currently is running WEP security but I want to secure it even better but dont know how to get it set to WPA2 security.
View 7 Replies View RelatedLinksys Wireless Router :: WAP54G Apparently Not Being Able To Do WPA2
Mar 12, 2012I have a WRT54GS v5 running firmware version 1.52.8. When I select the WPA wireless security mode, the encryption technique is fixed to TKIP - I am not given the option to change it to AES? I would really like to be able to select WPA- with AES (this is related to the WAP54G apparently not being able to do do WPA2 - AES in client mode).
View 3 Replies View RelatedLinksys Wireless Router :: E4200 With Only WPA2 No WEP Option?
Feb 28, 2012I have the E4200 router, trying to change the security option to WEP to see if my WD TV live will connect to it, becuase right now with the WPA2 its not connecting.
I dont know why my WD TV live wont connect to the router, its visible in the list though!!
even my PS3 is having troubles connecting to the E4200 with the WPA2 security.
Cisco Wireless :: Configuring Aironet 1040 With WPA2-PSK?
May 24, 2012I am attempting to configure two Aironet 1040 series wireless access points for the first time and am having some difficulty. This office does not have a RADIUS server so I would like to set them up to use WPA2 with a pre-shared key. However just how this is accomplished is not immediately apparent. I have attempted using both the command line interface and the web interface, but I get errors in both places. It doesn't seem like it is all that difficult, we're just talking about a few lines in the configuration file.
This is what I have so far:
Current configuration : 1684 bytes
!
version 12.4
no service pad
[Code].....
Cisco Wireless :: WLC5508 - Ipad2 Can't Join Wi-Fi Using Wpa2 AES
Apr 12, 2012we have a cisco WLC 5508 on which few SSIDs are configured, and two kinds of APs: AIR-LAP1142N-E-K9 and converted AIR-AP1141N-E-K9.
When in WLAN settings we leave WPA2 policy and AES encryption, iPads2 can connect without any problems to AIR-LAP1142N-E-K9, but there is no connection to converted AIR-AP1141N-E-K9. MacBooks, iPhones are connecting without questions.
When we set WPA2+TKIP everything is cool, but other Apple devices can't rich 802.11n speeds((
With only WPA2+AES or both WPA2+AES+TKIP enabled on a WLAN the WLC gets such messages :
Decrypt errors occurred for client xx:xx:xx:xx:xx:xx using WPA2 key on 802.11b/g interface of AP xx:xx:xx:xx:xx:xx
But I know that it can happen when you offer funny encryption combinations that client doesn't like (wpa1+aes, wpa2+tkip). But the advise to try to only enable wpa2/aes for some reason doesn't work.
1240AP - Setting Up WPA2-Enterprise Wireless Network
May 16, 2011So I have been tasked with setting up WPA2-Enterprise on the network. Right now for testing I have a single Cisco 1240AP, and a test Windows Domain. The Windows domain is at 2003 functional level, but has been extended to have the Wireless policies, and we have a 2008 DC in the test network also.
Is there any definitive guide to setting up a WPA2-Enterprise wireless network? Most of what I find is mostly client side. I am trying to get the Group Policy setup to push down to the client machines.
Cisco Wireless :: Use WAP4410N As Repeater On WPA2 And EAP-TLS WLan
Dec 21, 2010Can a WAP4410N be used as a repeater on an existing WPA2 + EAP-TLS WLAN? The existing WLAN is on a Cisco 871W router; we hope to use a WAP4410N as a repeater to extend it.
I've not had much luck so far with the "repeater" and "WDS repeater" AP modes on the 4410. I'm either configuring it wrong, or perhaps the 871W needs a config tweak? Or perhaps the 871's wireless can't be repeated like this?
Cisco Wireless :: Aironet 1240AG WPA2 Disassociation
Apr 29, 2013We are using an Aironet 1240AG series wireless AP here to connect handheld scanners. They work fine on WPA. However, when we switch to WPA2, they often lose connection. We have tested on 802.11g and a bands, with various encryption types (TKIP, AES, TKIP/AES). Also, how can I update the outdated firmware without signing up for a service contract?
View 3 Replies View RelatedCisco Wireless :: Aironet 1141 With WPA2 And MAC Filter
May 18, 2012I have an aironet 1141 with multiple v lans configured, all with wpa2 but I need to put mac filter on only one v lan, so I follow this manual: [URL}. Basically is mac a ACL and applied to sub interface. So, I can associate to the AP, but no one can transmit or receive . If i remove the ACL all works fine.
My config:
access-list 700 permit <maclist> 0000.0000.0000
access-list 700 deny 0000.0000.0000 ffff.ffff.ffff
interface Dot11Radio0.130
[code]....
Linksys Wireless Adapters :: WUSB11 Changed To WPA2 And Notice Wireless B Device Won't Connect
Nov 7, 2012I have a WUSB11 Wireless B and wonder if it accepts WPA2 security, I originally had my router set to WPA, and the wireless B worked fine, I have since changed to WPA2 and notice the Wireless B device won't connect.
View 8 Replies View RelatedLinksys Wireless Adapters :: WMP600N Cannot Connect WRT160N With WPA Or WPA2
Feb 21, 2010I've just purchased a new router (WRT160N) and wireless adapter (WMP600N). The problem is that I cannot connect to the router when I have it set to WPA or WPA2. At the same time my laptop with Atheros 9285n connects to router and works perfectly. When the wireless security disabled the wmp600n connects to the router without a problem and shows 300mbps connection speed and laptop 150mbps. When the router is set to WEP both laptop and pc with wmp600n connect but work very slow - 54mbps only.
View 7 Replies View RelatedLinksys Wireless Adapters :: WRT54GS - Cannot Enter WPA2 Passphrase
Mar 10, 2013After a lot of effort I got my wireless adapter to work like it should without security. I set WPA 2 level security on my WRT54GS wireless router and then went to access the router (set up as an access point) with the WPC54G ver 2 adapter on a Thinkpad T22, it says I have WEP encryption and I cannot enter the passphrase I used for the router. It does not let me select AES. It says to pick AES or TKIP, but TKIP is the only choice.
View 1 Replies View RelatedLinksys Wireless Router :: How To Install WPA2-AES Security On Old Wrt54G
Aug 11, 2012Instlling WPA2 on my router I had this router WRT54G ver 6 for several years and it works perfect only thing is I have no security on my n wireless
View 3 Replies View RelatedLinksys Wireless Adapters :: Can't Connect WGA600N After Switch To WPA2
May 6, 2013My wifi was previously unprotected. I switched to WPA2 and now can't connect to my network. In the set up, it can't even see the adapter. The lights tell me that the adapter is talking to my computer. The ethernet and wifi lights blink. What can I do other than unprotect my network? How can I set this up manually if the computer can't even see it?
View 1 Replies View Related