Getnet GN-621u Wireless Adapter - Can't Connect With WPA2-PSK (AES)
May 7, 2011
I've a Windows 2008 R2 install. I have a getnet GN-621u wireless adapter. I can connect with no encryption to my wireless router bu with wpa2-psk(aes) it fails. I have a laptop with win 7 on 64-bit and it can connect with the same wireless adapter with encryption enabled no problems. I'm guessing its MS's awesome server/workstation compatibility (not) getting in the way and this card simply doesn't work too well on the server environment. (its just a "workstation" that i'm using to develop sharepoint apps),
View 3 Replies
ADVERTISEMENT
Apr 12, 2011
I have a Realtek RTL8187 Wi-Fi adapter. I've got the latest drivers, and can configure my access point with WPA2-PSK, yet I'm unable to connect when using this authentication. I can keep the system open and it works great, even with WEP encryption, yet WPA2 does not seem to work.
View 6 Replies
View Related
Jan 13, 2012
This is a 5-year-oldish Gateway MX-6124 laptop running under Win XP 2002, SP3. I'm using SureWest DSL, with an ISP-supplied ComTrend NexusLink 5631 Modem/Router. The router is set up as a Secure Network, using WPA encryption. The laptop wireless operation light toggles off/on correctly using Fn-F2 control keys.I can connect to an open or non-secured wireless router, & have verified that at my church, at the Public Library, and at Starbucks. However, I cannot successfully connect to a passworded secured wireless source. I tried to use a secured network connection at my church yesterday, and could not connect. It "tries & tries" and eventually gives up and displays a cannot-connect type of message.
The laptop has worked correctly for several years on my home wireless network. It only stopped working about 3 or 4 weeks ago. I cannot recall changing anything in setup; I probably did it accidentally.I've spent about 2 hours in a couple of sessions with SureWest tech support. They diagnosed router setup using direct connect to the router, plus they talked me through several attempts at configuring the wireless config setup on the laptop. Everything I reported to them on the config settings appeared to be just fine. They also deduced that the wireless config on the desktop & router was correct.SureWest techs finally concluded that something was wrong with my laptop software config or the hardware, disabling it from making a encrypted connection. That sounds right to me, now having witnessed the secured connection failure described above, at my church wireless site.
I've looked at all the refs & things I can think of, plus followed step-by-step directions a couple of times with the SureWest techs. They rightfully pointed out that they could not make a tech support repair call on what did not appear to be a SureWest-related problem.I can easily make screenshots of any config screens needed on the laptop & upload to this forum.
View 5 Replies
View Related
Feb 21, 2010
I've just purchased a new router (WRT160N) and wireless adapter (WMP600N). The problem is that I cannot connect to the router when I have it set to WPA or WPA2. At the same time my laptop with Atheros 9285n connects to router and works perfectly. When the wireless security disabled the wmp600n connects to the router without a problem and shows 300mbps connection speed and laptop 150mbps. When the router is set to WEP both laptop and pc with wmp600n connect but work very slow - 54mbps only.
View 7 Replies
View Related
May 6, 2013
My wifi was previously unprotected. I switched to WPA2 and now can't connect to my network. In the set up, it can't even see the adapter. The lights tell me that the adapter is talking to my computer. The ethernet and wifi lights blink. What can I do other than unprotect my network? How can I set this up manually if the computer can't even see it?
View 1 Replies
View Related
Feb 18, 2013
I have a Linksys model WRT3110Nv2 and I cannot connect when my security is set WPA2 and i type in the correct password. it has no problem connecting when I set it to an unsecure network. ???
View 6 Replies
View Related
Nov 18, 2011
My iPad cannot connect to my network wireless through WPA2 using router E4200 the way my Macbook is connected. Only using guest access i can get internet contact. Is this a known problem with this combination and/or is it meant to be, that only guest access gives an iPad connection?
View 6 Replies
View Related
Jun 12, 2012
I have a 5508 WLC and 40+ LAP1142N APs spread across 19 locations that allows staff to connect to our private network via wireless. I recently deployed about 40 new laptops all identical make and model HP ProBook 4530's and all have the same client setup for the wireless. Out of those 40 laptops I have 4 that will not connect to the private network. However, these same laptops will connect to my public, open wireless network without issue. In addition to the 4 that will not connect all the others will prompt twice for network authentication.Now, I have about 10 other laptops that are not the HP model and all connect without issue and without dual propt. I don't think this is a wireless network issue but could be some type of issue with this model of laptop.
View 8 Replies
View Related
Nov 7, 2012
I have a WUSB11 Wireless B and wonder if it accepts WPA2 security, I originally had my router set to WPA, and the wireless B worked fine, I have since changed to WPA2 and notice the Wireless B device won't connect.
View 8 Replies
View Related
Jan 24, 2012
I have kindle fire that is unable to connect to the wireless network.All otehr devices windows phone, xbox and laptop are able to connect seamlessly.Amazon also sent me a replacement, but the issue is still the same. The error is:
"Unable to connect to the selected access point, Please check the password you provided."
Also, I removed the security on the network to see if its able to connect without password.The state where it fails is Obtaining IP address and it fails again.
View 1 Replies
View Related
Mar 19, 2011
I have bought B&N Nook color it is an e-reader. And it couldn't connect to my WiFi use the WEP so I changed my wireless setting to WPA/WPA2 now my e machine N-10 will not connect to the network.
View 1 Replies
View Related
Sep 28, 2012
I just bought a new samsung laptop and i was not able to connect to my wireless router
--I go into Wireless Network Connection and i am able to see my router along with the other routers in the area
--I try to connect it doesnt let me, i change the pw on my router doesnt let me, i remove the pw from the router doesnt let me.
--I connect a Ethernet cable to my laptop, im able to connect.
--i Go to the samsung website dl all the drivers for the wireless network, cant connect
--I use a wirelss adapter that i have for my desktop which works on my desktop, it cant connect
--i grab my little brothers cell phone and activate wireless hotspot, i can connect
--i switch my router settings from WPA2 Personal to WPA, i can connect
--while connect to WPA i switch it back over to WPA2 personal, i get disconnected.
my question now is. why cant i connected to WPA2 personal? Is my connectivity limited on my laptop? can i only connect via WPA or WEP?
--Asus wireless router i connect my tablet,cell phone adapter with my desktop, 2 other phones, another 2 laptops, 2 other tablets and another desktop to it. I never had an issue with any of these items.
--Windows 7 on all machine except for Linux on 1 laptop.
--Samsung laptop has all the windows updates install and all the drivers for the network and even gpu up to date.
View 13 Replies
View Related
Nov 12, 2012
I cannot get the camera to connect to our wifi via WPA2-PSK:AES, which is what it runs. The network /SSID is visible in the setup, but it won't connect and get an ip. I see no error messages or any kind of information at all in the admin web page.I've upgraded to firmware 1.05
View 2 Replies
View Related
Aug 12, 2011
I recently had to rebuild PC. All re-installed and happily working except wireless web access. I've re-installed wireless adaptor (BY Voyager 1055), but router will not issue an IP via DHCP to my PC. Can connect to same router using a laptop (picks up IP using DHCP). Have tried using static IP, connects, then loses connection after a few seconds.Both bits of kit are XP SP2, could it be a driver issue? My local telecom provider is unable to assist saying "it's something to do with your PC".
View 2 Replies
View Related
Sep 3, 2011
Wireless adapter sees the network, attempts to connect but cannot 'Validate Identity' in Windows. Security options in windows wireless network manager only allows me to choose from 'Shared' and 'Open' in Network Authentication (I need WPA-PSK) and only 'WEP' or 'Disabled' in Data Encryption
View 1 Replies
View Related
Aug 14, 2012
I just recently built my computer. I have a tp link 300 mb/s wireless adapter. When I plug the adapter in, windows doesn't detect it. It makes a sound when I put it in and take it out, but other then that, It wont detect the adapter. I cant connect to the internet on that computer. The adapter works on my other pc. Just not the one I just built.
View 1 Replies
View Related
Jan 12, 2013
My IBM T41 has an installed adapter. It says that it connects to the wireless networks I set up for it, but when I open web browsers, it doesn't really connect to the internet. I know the icon in the system tray for it is a computer monitor. The screen of the little monitor should blink if it works, and mine does not blink. I tried putting in 2 new adapters, but those failed to work.
3 years ago I had this same problem. I called my internet provider and someone was able to control my laptop from his computer. He opened some sort of settings screen that I had never seen before. I didn't even see how he got to it because he did it all so fast. After he changed a setting, my laptop was able to connect to the wireless internet. Since then, my internet provider has begun charging for this service so I've opted out of doing it again. I wonder if the man was using settings on the router website. If he was, what settings did he change that allowed my computer to connect?
View 8 Replies
View Related
Nov 9, 2011
i am trying to connect my laptop to my 360 and use it as a wireless adapter. i cannot for some reason do it it tried to bridge but wireless network goes away when the bridge is created.
View 1 Replies
View Related
Jan 21, 2011
I have installed Ubuntu on my HP laptop within Vista, because I am using the wireless adopter TP-LINK TL-WN721N to connect, I am not able to find the correct driver and install it.
View 1 Replies
View Related
Feb 25, 2012
I have a Ralink 802.11b/9 54 bps wireless USB adapter.I was able to install the drivers and get it so the computer sees the adapter and the adapter is able to see and connect to my wireless. It will not however connect to the internet. (I am using a HPpav a1113w with windows XP and I have a Dlink wireless router)
View 1 Replies
View Related
Nov 21, 2011
I know the network works because my work computer connects wirelessly.When I load the Intel My Wifi Utility it says Network adapter not found.What happened? I didn't do anything different or special...it just stopped working one day.I am running Win 7 64 bit. Toshiba Satellite Laptop.
View 19 Replies
View Related
Jul 21, 2011
Just bought a verizon 4g mifi.The laptop hooked up in a second to the device but i cant get my desktop computer to detect the connection.I tried using a USB Linksys wireless adapter then tried a netgear g-router but neither detect anything.
View 1 Replies
View Related
Mar 10, 2012
I need to connect a wireless router to a mifi 2200 for internet access.
View 1 Replies
View Related
Jul 24, 2012
I just changed my wifi modem and now I have a problem to connect my wireless g usb adapter on my PC to wifi. This wifi modem has a password. how to setup the network connection.
View 1 Replies
View Related
Mar 12, 2011
Last night the power either blinked or had a surge and I lost the internet on both of my computers. After restarting the Hughesnet modem and Netgear WNR3500L router, I now have internet service back on my laptop computer. However, I can't get it to work on my desktop. I have an HP Desktop running Windows XP (actually both computers are XP) using a Netgear Wireless-G USB 2.0 Adapter. Everything worked fine until today. Since then, it seems that the desktop sees the network, but can't connect to the internet. I've looked at a lot of forums and instructions and it sounds to me that the router will not assign the adapter an IP address. My wireless network connections have aegis protocol and tcp/ip selected, with obtain and ip address and dns server address automatically selected. I've uninstalled the adapter and reinstalled it and even done a system recovery on my computer in hopes to reset it, but nothing has worked. As you can see below I've tried most of the suggestions I've found online to no avail. I've also done the winsock and t something stack commands. I also don't know how to access my router b/c it's not connected to a computer. I could access it with my laptop, but I'm not sure how since it was setup with my desktop which required my entire desk to be physically moved at the time.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsOwner>ipconfig /all
[Code]....
View 7 Replies
View Related
Nov 14, 2012
i cannot connect wireless with this adapter
View 1 Replies
View Related
Jan 30, 2012
In my village i have a wifi connection which runs only on my laptop not on my pc it shows in pc but i m not able to login
View 1 Replies
View Related
Mar 18, 2013
I'm starting this thread because I can't get my new Linksys AE2500 wireless use adapter to connect to my new Linksys X2000 ADSL modem. I purchased both of these devices because my old 2wire modem kept dropping the wifi signal and I had to keep turning off and on the modem in order to get the wifi signal back. Now my problem is that I can't connect my AE2500 adapter to the x2000 modem at all, heck I can't connect any wifi enabled device to the modem even though the SSID and password is correct. The adapter finds the network but it can't connect to it at all. The x2000 modem works perfectly since I can use the internet if I connect my computer to it via Ethernet cable but unfortunately I have my desktop in my room and the modem is in the living room so connecting using an Ethernet cable really isn't an option. I tried using my old 2wire modem to see if it would connect to that modem and it did as a matter of fact and the speeds were good but as of late, the speeds have been horrible and the signal drops every few minutes. I get 1 bar in the network status and speed of 1.0 Mbps. Here is a picture for reference:
The problem only persists when using wifi though because when connected to the 2wire modem, the speeds are fast. Range isn't really a problem because im like 10 feet away from the router so I'm not sure what's causing that problem. I assume it's the modem being that its about 7 years old so I would really like to get my x2000 working to see if it's better than my old 2 wire. I'm currently connected to my old 2wire modem via my AE2500 wireless usb adapter as that's the only way I can use the internet.Here's my info:
[code]....
View 4 Replies
View Related
Jan 16, 2012
I have a Windows 7 machine that is a client to an old SBS 2003 server. I don't use the server but once a month anymore because there is some old software that I need to keep on it. I also don't want to use the server for internet access anymore. I just use a wireless adapter on the client machine for internet connection. My problem is that I can either use my wireless adaptor for internet access or connect to my server. I can't do both at the same time (I get the "multiple networks red x") and no internet access.
View 4 Replies
View Related
Sep 16, 2012
So earlier today I purchased a new video card, a PNY Nvidia Gtx 560. After installing the drivers through the disc, I ended up getting he BSOD, and my PC just kept on restarting automatically. I fixed that problem, and found out that I should install the drivers for it through their website instead. So, after restarting my PC yet again, I tried using the Internet (Chrome) and found out that I have no Internet connection. Now, I am writing this on my iPad using the same router and modem that my PC is supposed to be using, but I keep on checking my WLAN adapter and it says that it is Not Connected. Now I have tried every forum, every post, EVERYTHING related to this problem and not a single thing fixes it. Also, when I do the ipconfig, everything says Media Disconnected and that's it. PS, I tried unplugging/plugging back in my modem and router PPS, Is it possible that when installing my new gcard and psu that I may have messed up with something internally?
View 14 Replies
View Related
Nov 27, 2011
My PC running on Windows 7.I'm connected Internet via Wireless adapter. [code] But after connect VPN i'm not able to connect Internet anymore. I think because there are 2 gateway in there. and the default gateway become vpn network. In my case. How to connect vpn client and internet wireless adapter simultaneously?
View 1 Replies
View Related
Feb 7, 2012
I am trying to use a MIFI hotspot for the internet, I have a wifi laptop, and a wifi printer.I would like to print wirelessly from my laptop and use the internet at the same time, but I can't. To print I have to go to my wireless network and switch to my router. And if I want to use the internet I have switch my wireless network back to the MIFI hotspot.
View 3 Replies
View Related
Apr 23, 2010
I recently purchased the Linksys E3000 router. My old network set up had been 100% wired, but with the new router we have converted to wireless on some of the internet capable devices. I have 2 pc's side by side in separate room from the router that we purchased wireless adapters for, the Linksys AE1000. One pc set up fine and accesses the internet with no issues. The second pc cannot connect the network. It sees the network with a good signal strength, but it times out when trying to connect.I called tech support and have been through a variety of things with them to no avail so far.Both of these pc's are running Windows XP SP3. On the one that won't connect, have already confirmed in device manager that the adapter is correctly installed. I uninstalled it, rebooted, reinstalled it anyway with no luck. With tech support already tried disabling the 5ghz band and changing the channel on the 2.4ghz band to 11.I have confirmed several times I am entering the password in correctly, and I did pay attention to case sensitivity.When I run ipconfig/all, it says under Media State: Media Disconnected.
View 5 Replies
View Related
