Wireless adapter sees the network, attempts to connect but cannot 'Validate Identity' in Windows. Security options in windows wireless network manager only allows me to choose from 'Shared' and 'Open' in Network Authentication (I need WPA-PSK) and only 'WEP' or 'Disabled' in Data Encryption
View 1 Replies
I recently had to rebuild PC. All re-installed and happily working except wireless web access. I've re-installed wireless adaptor (BY Voyager 1055), but router will not issue an IP via DHCP to my PC. Can connect to same router using a laptop (picks up IP using DHCP). Have tried using static IP, connects, then loses connection after a few seconds.Both bits of kit are XP SP2, could it be a driver issue? My local telecom provider is unable to assist saying "it's something to do with your PC".
View 2 Replies View RelatedI just recently built my computer. I have a tp link 300 mb/s wireless adapter. When I plug the adapter in, windows doesn't detect it. It makes a sound when I put it in and take it out, but other then that, It wont detect the adapter. I cant connect to the internet on that computer. The adapter works on my other pc. Just not the one I just built.
View 1 Replies View RelatedMy IBM T41 has an installed adapter. It says that it connects to the wireless networks I set up for it, but when I open web browsers, it doesn't really connect to the internet. I know the icon in the system tray for it is a computer monitor. The screen of the little monitor should blink if it works, and mine does not blink. I tried putting in 2 new adapters, but those failed to work.
3 years ago I had this same problem. I called my internet provider and someone was able to control my laptop from his computer. He opened some sort of settings screen that I had never seen before. I didn't even see how he got to it because he did it all so fast. After he changed a setting, my laptop was able to connect to the wireless internet. Since then, my internet provider has begun charging for this service so I've opted out of doing it again. I wonder if the man was using settings on the router website. If he was, what settings did he change that allowed my computer to connect?
i am trying to connect my laptop to my 360 and use it as a wireless adapter. i cannot for some reason do it it tried to bridge but wireless network goes away when the bridge is created.
View 1 Replies View RelatedI have installed Ubuntu on my HP laptop within Vista, because I am using the wireless adopter TP-LINK TL-WN721N to connect, I am not able to find the correct driver and install it.
View 1 Replies View RelatedI have a Ralink 802.11b/9 54 bps wireless USB adapter.I was able to install the drivers and get it so the computer sees the adapter and the adapter is able to see and connect to my wireless. It will not however connect to the internet. (I am using a HPpav a1113w with windows XP and I have a Dlink wireless router)
View 1 Replies View RelatedI know the network works because my work computer connects wirelessly.When I load the Intel My Wifi Utility it says Network adapter not found.What happened? I didn't do anything different or special...it just stopped working one day.I am running Win 7 64 bit. Toshiba Satellite Laptop.
View 19 Replies View RelatedJust bought a verizon 4g mifi.The laptop hooked up in a second to the device but i cant get my desktop computer to detect the connection.I tried using a USB Linksys wireless adapter then tried a netgear g-router but neither detect anything.
View 1 Replies View RelatedI need to connect a wireless router to a mifi 2200 for internet access.
View 1 Replies View RelatedI just changed my wifi modem and now I have a problem to connect my wireless g usb adapter on my PC to wifi. This wifi modem has a password. how to setup the network connection.
View 1 Replies View RelatedLast night the power either blinked or had a surge and I lost the internet on both of my computers. After restarting the Hughesnet modem and Netgear WNR3500L router, I now have internet service back on my laptop computer. However, I can't get it to work on my desktop. I have an HP Desktop running Windows XP (actually both computers are XP) using a Netgear Wireless-G USB 2.0 Adapter. Everything worked fine until today. Since then, it seems that the desktop sees the network, but can't connect to the internet. I've looked at a lot of forums and instructions and it sounds to me that the router will not assign the adapter an IP address. My wireless network connections have aegis protocol and tcp/ip selected, with obtain and ip address and dns server address automatically selected. I've uninstalled the adapter and reinstalled it and even done a system recovery on my computer in hopes to reset it, but nothing has worked. As you can see below I've tried most of the suggestions I've found online to no avail. I've also done the winsock and t something stack commands. I also don't know how to access my router b/c it's not connected to a computer. I could access it with my laptop, but I'm not sure how since it was setup with my desktop which required my entire desk to be physically moved at the time.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsOwner>ipconfig /all
[Code]....
i cannot connect wireless with this adapter
View 1 Replies View RelatedIn my village i have a wifi connection which runs only on my laptop not on my pc it shows in pc but i m not able to login
View 1 Replies View RelatedI've a Windows 2008 R2 install. I have a getnet GN-621u wireless adapter. I can connect with no encryption to my wireless router bu with wpa2-psk(aes) it fails. I have a laptop with win 7 on 64-bit and it can connect with the same wireless adapter with encryption enabled no problems. I'm guessing its MS's awesome server/workstation compatibility (not) getting in the way and this card simply doesn't work too well on the server environment. (its just a "workstation" that i'm using to develop sharepoint apps),
View 3 Replies View RelatedI'm starting this thread because I can't get my new Linksys AE2500 wireless use adapter to connect to my new Linksys X2000 ADSL modem. I purchased both of these devices because my old 2wire modem kept dropping the wifi signal and I had to keep turning off and on the modem in order to get the wifi signal back. Now my problem is that I can't connect my AE2500 adapter to the x2000 modem at all, heck I can't connect any wifi enabled device to the modem even though the SSID and password is correct. The adapter finds the network but it can't connect to it at all. The x2000 modem works perfectly since I can use the internet if I connect my computer to it via Ethernet cable but unfortunately I have my desktop in my room and the modem is in the living room so connecting using an Ethernet cable really isn't an option. I tried using my old 2wire modem to see if it would connect to that modem and it did as a matter of fact and the speeds were good but as of late, the speeds have been horrible and the signal drops every few minutes. I get 1 bar in the network status and speed of 1.0 Mbps. Here is a picture for reference:
The problem only persists when using wifi though because when connected to the 2wire modem, the speeds are fast. Range isn't really a problem because im like 10 feet away from the router so I'm not sure what's causing that problem. I assume it's the modem being that its about 7 years old so I would really like to get my x2000 working to see if it's better than my old 2 wire. I'm currently connected to my old 2wire modem via my AE2500 wireless usb adapter as that's the only way I can use the internet.Here's my info:
[code]....
I have a Windows 7 machine that is a client to an old SBS 2003 server. I don't use the server but once a month anymore because there is some old software that I need to keep on it. I also don't want to use the server for internet access anymore. I just use a wireless adapter on the client machine for internet connection. My problem is that I can either use my wireless adaptor for internet access or connect to my server. I can't do both at the same time (I get the "multiple networks red x") and no internet access.
View 4 Replies View RelatedSo earlier today I purchased a new video card, a PNY Nvidia Gtx 560. After installing the drivers through the disc, I ended up getting he BSOD, and my PC just kept on restarting automatically. I fixed that problem, and found out that I should install the drivers for it through their website instead. So, after restarting my PC yet again, I tried using the Internet (Chrome) and found out that I have no Internet connection. Now, I am writing this on my iPad using the same router and modem that my PC is supposed to be using, but I keep on checking my WLAN adapter and it says that it is Not Connected. Now I have tried every forum, every post, EVERYTHING related to this problem and not a single thing fixes it. Also, when I do the ipconfig, everything says Media Disconnected and that's it. PS, I tried unplugging/plugging back in my modem and router PPS, Is it possible that when installing my new gcard and psu that I may have messed up with something internally?
View 14 Replies View RelatedMy PC running on Windows 7.I'm connected Internet via Wireless adapter. [code] But after connect VPN i'm not able to connect Internet anymore. I think because there are 2 gateway in there. and the default gateway become vpn network. In my case. How to connect vpn client and internet wireless adapter simultaneously?
View 1 Replies View RelatedI am trying to use a MIFI hotspot for the internet, I have a wifi laptop, and a wifi printer.I would like to print wirelessly from my laptop and use the internet at the same time, but I can't. To print I have to go to my wireless network and switch to my router. And if I want to use the internet I have switch my wireless network back to the MIFI hotspot.
View 3 Replies View RelatedI recently purchased the Linksys E3000 router. My old network set up had been 100% wired, but with the new router we have converted to wireless on some of the internet capable devices. I have 2 pc's side by side in separate room from the router that we purchased wireless adapters for, the Linksys AE1000. One pc set up fine and accesses the internet with no issues. The second pc cannot connect the network. It sees the network with a good signal strength, but it times out when trying to connect.I called tech support and have been through a variety of things with them to no avail so far.Both of these pc's are running Windows XP SP3. On the one that won't connect, have already confirmed in device manager that the adapter is correctly installed. I uninstalled it, rebooted, reinstalled it anyway with no luck. With tech support already tried disabling the 5ghz band and changing the channel on the 2.4ghz band to 11.I have confirmed several times I am entering the password in correctly, and I did pay attention to case sensitivity.When I run ipconfig/all, it says under Media State: Media Disconnected.
View 5 Replies View RelatedOwn a Dell Studio XPS 16 laptop. Intel wifi link 5100 agn network adapter, Router is ok because mobile phones connect through wifi
View 1 Replies View RelatedSince i installed windows 7 on my Samsung R530 notebook i am unable to connect to internet through built in network adopter. while on diagnos it appears that network adopter is not found or may be the driver not been installed?
View 1 Replies View RelatedI'm on a Dell Inspiron 530 using an Intel 82562V-2 wireless adapter.Ever since my PC fell asleep while I was updating to iOS 5.0 on my iPhone, I havent had wireless.It's not acknowledging my network.
View 10 Replies View RelatedI am trying to connect wirelessly to my BT Home Hub via a USB Wireless adaptor. The homehub works perfectly and I have other laptops in the house connecting via the wireless networkHowever, this is the problem. The Wireless connection status shows as good but packets only being sent and not received. Therefore when I load Internet Explorer, I get WebPage Not availableI notice that my IP address is starts with 169 and researching forums suggests that this is the problem and it should start 192? I have tried all sorts of things but simply cannot get this resolved. If I plug the HomeHub into the laptop directly, the connection via the ethernet cable works fine.
View 6 Replies View Relatedwas working fine with my new router DSL-2730U D-link router and using it's wireless connectivity with G/N mixed mode..and i noticed that the range is so low so i decided to switch to N-only mode and when i did that i couldn't connect at all!..the router uses N-150 btw.
View 8 Replies View RelatedWill a realtek wireless network adapter connect to a Linksys WRT 110 router from a wood frame house to a concrete building approx. 100 ft. away
View 1 Replies View RelatedI have a Linksys WRT600N wireless router. I just bought a Linksys AE1000 wirless adapter to add wireless capability to my Hewlett Packard PC. I am able to see and connect to my G-Band (2.4) with no problem, but the adapter can't connect to the N-Band. It see's it, but can't connect to it. The signal strength shown is good, but it still can't connect.
View 2 Replies View Relatedmy netgear wireless router cannot see my n300 usb adapter. it shows as working in my device manager, but the netgear router says wireless not connected. when installing the adapter it said that windows has an icon to the left of the taskbar that i can click on and ask to join a network, which it didnt. it just showed network and an option to open network and sharing center, which i did. there were no wireless networks that showed available for me to log into with the adapter
View 4 Replies View RelatedWRT610v2 running latest firmware.
xbox 360 sees both the 2.4 network (ssid = network1) and the 5.0 network (ssid network2) when it does its scan.
Initially, xbox showed network strength for 2.4 network at 3 out of 4 bars and 5.0 network at 1 out of 4 bars. Connects to 2.4 network just fine, Won't pull an ip address and reports "Not connected" when I select the 5.0 network.
I tweaked the wireless settings per some suggestions I found in this forum and now it shows the 5.0 network at 4 out of 4 bars signal strength. Also turned security on and off and xbox 360 reported the changes in security on the 5.0 network. So the xbox 360 is definitely seening the 5.0 network. and can tell if it is running WPA2 or not. If it can see the 5.0 network and recognizes what security and network type (infrastructure) is set, would would stop it from connecting to the WRT610n router and getting an IP address? No mac filters or firewalls are set and, again, connects just fine and gets an ip address if I select the 2.4 (network1 ssid) instead.
ok here it goes. I have a hp tx2000 laptop using vista with a alfa awuso36h usb adapter to connect to the internet. Ok heres the problem i was using this setup to connect to my neighbores wireless internet with no problems for about 2 weeks(yes they know and are fine with me using it). But within the past week (actually all of a sudden it wont work) my program that came with the adapter shows alot of networks with full signals but when i connect to any of them it shows connected but wont actually bring up the internet. When i click on i.e. It says i.e. Cannot display the webpage. And if it actually does take me to google it will disconnect for no reason and reconnect to a random network thats available. my neighbors connection i was using just all of a sudden quit working and if i try to connect to it , it says cannot connect to frontier87. Also the other networks that show up sometimes will say the settings saved on this computer for this network dont match the requirements of the network, but sometimes the same network will connect but wont actually bring up the internet. I guess i just want to know what has changed to make me not be able to use a network that worked fine for me last week.
View 1 Replies View RelatedI need to connect a pc desktop and A linksys PAP-2T voip adapter to an existing wireless network(home network).
View 7 Replies View RelatedToday I bought a TP-Link 150 Mbps Wireless PCI Express Adapter so I can pick up the internet connection in my house from my home PC. (We use a laptop most of the time which is able to pick it up fine).I've installed the wireless adapter into the computer and installed the drivers however I receive an error message:
"The device may not be present or could have been ejected/unplugged from the system. Insert of Reinsert Now."
