BT Home Hub Cannot Identify Sony Bravia
Jun 9, 2012
Just bought a Sony Bravia KDL-46EX723 today and i am currently trying to connect it to my BT home hub via a "wired set up". BT home hub does not seem to be detecting the TV at all, when i try to do an auto set up it searches for a while and then comes back with, cable connection:failed, local access:failed, internet access:failed.I have went on to my network page to see if it was connecting to anything else and it is finding my external hardrive no problem via the Ethernet cable.I have tried looking at my computer IP details and adding them manually to the TV, but no joy, just comes back with the same errors.
View 7 Replies
ADVERTISEMENT
Sep 13, 2011
I'm having an issue with my Sony Bravia 3D TV. It has wireless built in LAN and I've been using it to connect wirlessly through my router. A few days ago it just stopped connecting. I had the network setting on my TV for the IP adress on auto, but I input manual settings (router ip adress) to see if it would work, no success. Everytime I try and connect it says
wirless device- ok
local access- failed
internet access failed
I can use the internet with my computer/phone/portable gaming device, just not the TV. I tried disabling my firewall on my computer to see if it was causing an issue but that didn't work. My router is a gateway 2wire and my computer is a windows vista laptop.I went ahead and did the ipconfig as I suspect it'll be needed?
Windows IP Configuration
Host Name . . . . . . . . . . . . : Alyssa-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
[code]....
View 5 Replies
View Related
Mar 30, 2013
i seem to be having problems connecting to the wireless set up on my sony bravia tv.
Connections results
Wireless device on tv found
Local access failed
Internet access failed
View 5 Replies
View Related
Jul 2, 2011
Is there a way to get the Internet onto my TV (Sony Bravia DL-46W2000), or do I have to buy a new Internet-enabled one? If so, what's the best one which is most Interneted - or are they all the same?I've heard about TV dongles that maybe can do WiFi to my router?There's no Ethernet or USB socket on the TV; just S VHS/Hi8/DVC; HDMI; SCART; and DVD player sockets.
View 1 Replies
View Related
Jan 16, 2013
Connected via wireless. All ok and says have Internet connection, but cannot access any video content' I.e. iplayer, etc. when check via refresh internet content (as Sony recommend) says "configuration failed while connecting. The system has encountered an error. If problem persists contact Sony (5006)". Sony say wireless strength insufficient, but when tried wired set up be relocating NETGEAR router gives same error message. Have NETGEAR wireless extender good signal with full connectivity via laptop, iPad and iPhone. Also when try server display settings says servers cannot be recognised. When go to options and select update list repeats "servers cannot be recognised. Have checked all IP etc and same as on laptop:
IP Address:192.168.0.11
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1?
View 13 Replies
View Related
Jan 29, 2012
I've just bought a Sony Bravia with in-built wireless connectivity but I cannot get it to connect to the internet.I have a Talk Talk dlink DSL2640R wireless router I have entered the following settings manually in to the tv:
IP Address . . . . . . . . . . . : 192.168.1.50
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Server 1 . . . . . . . . . . . : 192.168.1.1
DNS Server 2 . . . . . . . . . . . : 192.168.1.1
together with my WPA key which I have checked is correct.I keep getting the following result:
wireless device : OK
local access : failed
Internet access : failed
When I do ipconfig/all I get the following:
Windows IP Configuration
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
View 6 Replies
View Related
May 7, 2011
On instruction from reviews of the TV on amazon, i bought a TP-Link wireless range extender to set up as a client/repeater (not sure which to use) to connect wirelessly to my router in another room so i can connect an ethernet to the TV for online functions without an overpriced Sony wireless dongle.I connect the device to the router, assign a random IP in the same subnet as my lan (since it has the same default address as my router) and set the default gateway to my router's IP address (assuming this is what it is asking for) and set the device to either client or repeater mode (unsure of which i need so have tried both) and everything seems fine until this point. However, I set the device to WEP security and set the WEP key to the same as my router as the instructions say and my router instantly loses it's internet connection entirely and repeatedly tries to reconnect and fail until i disable WEP security on the wireless range extender, at which point it successfully reconnects.
View 4 Replies
View Related
Jan 23, 2011
I cannot make my Sony Bravia Connect to our Network using a Cat5 cable directly connected to the Router. (Netgear) The Wireless works just fine as both of our laptops and our son's Wii are connected without issue...I have rebooted everything multiple times, did a hard restore on the television. When we connect directly to the Modem. the TV will connect to the internet. But when we use the router.. No go..
View 3 Replies
View Related
Jul 3, 2012
I recently bought a Sony Bravia HD TV with wireless internet capabilities. When I try to connect to my wireless internet. The TV finds our wireless router name, but when we try to finally connect wirelessly it gives the following message: TV wi-fi found, local access failed and network access failed. The router we have is a Netgear PK500.
On the TV we have three differant ways for the tv to locate the router they are by scanning, the WPS button and by entering the WPS pin. We've tried all three and got the above message.
[code]....
View 1 Replies
View Related
Jun 22, 2012
I have had a Netgear WNDR3700 wireless router for over a year now, and have had no problems connecting to wireless devices (currently connects perfectly to: windows 7, OSX, Android, and Meego). I have recently purchased a Sony Bravia NX720, which has a built in wireless card. When I connect the television via LAN to the router the internet works fine, however when I connect via my wifi network (i.e. there is no physical connection between the tv and the router) I get the following message:
Connection Results
Wireless Device On TV: found
Local Access: OK
[Code].....
View 7 Replies
View Related
Sep 11, 2011
I'm attempting to network my 2007 Sony Bravia and connect to my BT Hub. Set's too old to have USB or DNLA but does have a vga input. Powerline plug system will give me net/pc access, with video and audio if I use an ethernet to vga adaptor at the back of the TV?
View 4 Replies
View Related
Dec 29, 2012
I have a Sony Bravia KDL46EX640 which comes with a wireless USB adapter. When I first bought this, I set up wireless network and it went fine. I was able to use the applications for video streaming.
I was trying it again now and it doesn't work. It seems like I can't even connect to my wireless network. I tried to set it up again but it can't find my wireless network. I have tried resetting the TV too (UP arrow + Power button on TV) and still doesn't work. Contacted Sony support but they didn't assist. I have a laptop and ipad connected to the router in the same room so signal is not a problem.
View 3 Replies
View Related
Dec 12, 2012
I have in my basement a router (DLink DIR-655) which is connecting to our ISP, and I have cables running to wall jacks in the first floor. A wall jack which terminates in the living room I have connected to a switch, a DLink 10/100/1000 (DGS-1005G). To this I have my PS3 connected which can connect to the internet fine (although it seems to not get the same upload / download speeds other devices get) and my Sony Bravia TV (KDL-46Z5100). The PS3 registers as GB, while the TV 100MB (its port lights orange).
The problem is I can't get the TV to connect to the internet. If I try DHCP, it doesn't seem to find the DNS server (on another switch connected to the same router in a different room). If I hard code the IP address, still nothing.
I found that if I connect the TV directly into the wall, it can connect. It's just through the switch I'm having problems. Additionally, even I then plug it back into the switch and connect the switch to the wall jack, the connect continues to work. It just seems that i can't get it initialize when connected to the switch.
View 1 Replies
View Related
Nov 14, 2011
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 6134 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 463782 MB, Free - 396406 MB; D: Total - 13154 MB, Free - 1850 MB;
Motherboard: PEGATRON CORPORATION, Benicia
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
I recently bought a Sony Bravia HD TV with wireless internet capabilities.When I try to connect to my wireless internet. The TV finds our wireless router name, but when we try to finally connect wirelessly it gives the following message: TV wi-fi found, local access failed and network access failed. The router we have is a Actiontech PK500.On the TV we have three differant ways for the tv to locate the router they are by scanning, the WPS button and by entering the WPS pin. We've tried all three and got the above message.
View 7 Replies
View Related
Feb 28, 2011
Im attempting to connect to a password protect WAP2 Personal Wireless Network (I have Windows Vista). Unfortunately I can connect to the network but it will not Identify the network therefore I cannot connect to the Internet.
I have tried turning off the router and my computer, I have also tried both of the windows fixes for this problem (Reseting the network adapter and resetting my IP settings).
View 2 Replies
View Related
Jan 19, 2011
I recently got my laptop fixed after it being out of commission for about a year (it turns out there was just too much dust collecting in it) and when I got home and tried to connect to my wifi network, I didn't have internet access. I received a message that said I had sucessfully connected to my network but it was only a local connection - no internet. It also shows up as "Unidentified Network." This is peculiar to me because my boyfriend's laptop is able to connect to the internet wirelessly just fine, and I am currently using the wifi on my iPhone. I ran the ipconfig and several ping tests in cmd and used a wifi inspector.
Windows IP Configuration
Host Name . . . . . . . . . . . . : owner-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]...
View 4 Replies
View Related
Jul 3, 2011
I have a BT Home Hub 2 router with a working internet connection. I'm using a different laptop on the same router to make this post.I have another laptop which cannot browse the internet.It runs on Windows 7, can connect to the router fine, but get no intenet connection. Now oddly enough, I can connect to and download games from Steam, but I cannot browse to websites using IE or Firefox and I cannot connect to MSN messenger.
When I click on Troubleshoot in messenger it tells me:
"Your DNS appears unable to resolve IP adresses" and then...
When I click repair, it can't fix it.
If I right click on the connection and click on status, I see...
If I click on Details, I then see...
If I right click on the connection and click on Troubleshoot Problems, I get this...
View 10 Replies
View Related
Jul 28, 2012
I am using a VAIO with win7. Also I have several items conected to the network. Since two week, my VAIO is not able to conect any WiFi network. I reinstaled the driver of the atheos9285 also tried to fix IP crash. Not much hapend. I downloaded the mentioned Xirrius WiFi Inspector, and when I click the Network on the upper left corner I get no information there.
View 19 Replies
View Related
Apr 8, 2012
For the past few days my laptop (Sony Vaio VGN-CR353) suddenly unable to detect/find my home wireless network but my other devices (ipad2/ipod) can detect my own wireless network. My laptop can however still can detect my neighbours' wireless network.
View 1 Replies
View Related
Sep 5, 2012
i am having a sony vaio SVE151B11W with windows home basic.i have a atheros bluetooth driver,will a driver of different company work fine?
View 1 Replies
View Related
Jun 1, 2012
I'm using a coaxial networking system and would like to electronically identify each section of coax in my network with a mac id for tracking purposes. Is there any way to do this without taking much space? Is there a microchip that I can install,preferably something that can withstand extreme environments?
View 4 Replies
View Related
Apr 3, 2012
I cannot get Internet connection to my Bravia tv. I have directv as well as century link for my ISP. Dirctv blames Century link for the problem. Century link blames Directv. Also, recently bought a MacPro laptop. Am having trouble connecting my printer (hp6500 series) as well as my Blackberry Bold cell phone so I can sync it.
View 3 Replies
View Related
Sep 19, 2011
Last winter I bought a Sony Bravia KDL- 46EX710 DLNA LCD/LED TV it is connected to the internet through my Linksys WRT160Nv3 router via LAN, everything worked perfect when I stopped using it for the summer, this past week I turned it back on and tried to access my photos on my PC through the TV and it said it could not find the server, I have tried everything but to no avail. I have stopped my AVG antivirus and Windows firewall, still can't access the files on my PC, the PC's in the home can access each other over this router, even the internet is accessed by the TV over this router so the router and TV are connected but the TV can not access the computers over this router, I have tried a new ethernet cable and still nothing[CODE]
View 11 Replies
View Related
Mar 24, 2013
HD (1920x1080) TV sees and plays all SD mpg (720x576) stored on a Lacie network drive. Now working in HD (1920x1080) and find that the TV does not even see the mpg files, let alone play them. If I convert the HD files to SD they are then visible again. It seems odd that a HD TV cannot see and play HD videos.
View 2 Replies
View Related
Apr 15, 2013
I have what appears to be a 2.4 GHz usb wireless adapter. My PC will not recognize it. How can I get my PC to recognize it?
View 3 Replies
View Related
Dec 19, 2012
I've seen where the micron is printed on a fiber strand, and that you can identify the connector type, but how do identify the difference between a 50 micron OM4 MMF, a 50 micron OM3 MMF, and a 50 micron OM2 MMF?
View 7 Replies
View Related
Jun 28, 2011
I have purchased a new home where cat5e was run from several locations throughout the house to the basement. Unfortunately, the runs were not marked. I know you can short one end of each cable and measure (voltage resistance?) at the other end in the basement to identify it. I need the process and equipment required so I can wire my home. The cables are not terminated.
View 11 Replies
View Related
Aug 26, 2012
I recently got a new computer from work, and it won't connect to my home network. I restored it to factory condition, and reinstalled the drivers for the wireless adapter card, but it won't identify my home network. The network adapter is a D-Link WDA 1320 and I'm trying to connect it to my home network which is AT&T Uverse, and the router is a 2wire 3800hgv-b. Hopefully that is enough information for at least an educated guess, I'm not so hot when it comes to home networking matters.This doesn't happen on any other computer.
View 12 Replies
View Related
Jul 15, 2011
I've recently moved house and decided to go with Virgin as my ISP. I was able to connect one laptop (running Windows 7), with no hassle, to the internet just fine, however, I've tried connected another laptop (running Windows Vista) and can connect to my router but cannot connect to the internet and it's telling me it cannot identify the network =/ I also can't connect to the internet if I use my ethernet cable. I phoned up tech support also and they recommended I update my drivers, but Windows is telling me I have the most up to date driver for my network adapter.
View 19 Replies
View Related
Feb 14, 2011
Recently, I have shifted to new house, where there is alreay existing Broadband connection and i don't have the details of it. When i try to search broadband connectivity, i get too many connection details, and i am not sure which SSID belong to my house. How can i find SSID which is for my own house? Also where i can get the "Key" details required for it?
View 1 Replies
View Related
Jun 12, 2011
I am recieving full wireless signal stregth and says that i am connected but my computer cant identify the network and wont connect to the internet. I have tried everything the diagnosis has said to try but non of it has worked thus far.
View 1 Replies
View Related
Aug 28, 2011
I'm a little confused about doing a translation using static identitiy NAT.I have a prorietary router that I would like to move behind my firewall (ASA 8.2x). Right now it runs in parallel with my router from a DMZ switch. I have change ISPs and the location the connection comes into my building so this confiugration is less than desirable.The vendor requires a static public address. So I am hoping/assuming a regular NAT statement of:
static (Inside,Outside) 72.12.206.211 192.168.1.xx netmask 255.255.255.255 .will work since the routers inside interface connectes to my inside LAN network anyway.
However, if they insist on having a Non-Nat'ed Public IP how do you do that? I have researched Static Identity NAT that shows the following: 72.12. 206. 211 (outside) FW (inside) 72.12.206.211
and they show a static statement of static (Outside,Inside) 72.12.206.211 72.12.206.211 netmask 255.255.255.255.How do you set up the nat statements for this configuration? Do you assigne the "external" IP address to the router even though it is behind the firewall (which is what I am asuming).
View 1 Replies
View Related
Feb 9, 2011
My computer is a thinkpad with vista and when i go home to my wireless internet it connects just fine. When i go on campus to use wireless internet it also works just fine. But when i am at my apartment using a Netgear wireless adaptar connected to broadband cable provider. my computer just keeps telling me that the connection is unidentified and I have to use my ethernet cable all the time. I have two roommates that connect just fine (one has a macbook the other has xp)
View 4 Replies
View Related
