I cannot get Internet connection to my Bravia tv. I have directv as well as century link for my ISP. Dirctv blames Century link for the problem. Century link blames Directv. Also, recently bought a MacPro laptop. Am having trouble connecting my printer (hp6500 series) as well as my Blackberry Bold cell phone so I can sync it.
View 3 RepliesI'm having an issue with my Sony Bravia 3D TV. It has wireless built in LAN and I've been using it to connect wirlessly through my router. A few days ago it just stopped connecting. I had the network setting on my TV for the IP adress on auto, but I input manual settings (router ip adress) to see if it would work, no success. Everytime I try and connect it says
wirless device- ok
local access- failed
internet access failed
I can use the internet with my computer/phone/portable gaming device, just not the TV. I tried disabling my firewall on my computer to see if it was causing an issue but that didn't work. My router is a gateway 2wire and my computer is a windows vista laptop.I went ahead and did the ipconfig as I suspect it'll be needed?
Windows IP Configuration
Host Name . . . . . . . . . . . . : Alyssa-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
[code]....
i seem to be having problems connecting to the wireless set up on my sony bravia tv.
Connections results
Wireless device on tv found
Local access failed
Internet access failed
Is there a way to get the Internet onto my TV (Sony Bravia DL-46W2000), or do I have to buy a new Internet-enabled one? If so, what's the best one which is most Interneted - or are they all the same?I've heard about TV dongles that maybe can do WiFi to my router?There's no Ethernet or USB socket on the TV; just S VHS/Hi8/DVC; HDMI; SCART; and DVD player sockets.
View 1 Replies View RelatedConnected via wireless. All ok and says have Internet connection, but cannot access any video content' I.e. iplayer, etc. when check via refresh internet content (as Sony recommend) says "configuration failed while connecting. The system has encountered an error. If problem persists contact Sony (5006)". Sony say wireless strength insufficient, but when tried wired set up be relocating NETGEAR router gives same error message. Have NETGEAR wireless extender good signal with full connectivity via laptop, iPad and iPhone. Also when try server display settings says servers cannot be recognised. When go to options and select update list repeats "servers cannot be recognised. Have checked all IP etc and same as on laptop:
IP Address:192.168.0.11
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1?
I've just bought a Sony Bravia with in-built wireless connectivity but I cannot get it to connect to the internet.I have a Talk Talk dlink DSL2640R wireless router I have entered the following settings manually in to the tv:
IP Address . . . . . . . . . . . : 192.168.1.50
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Server 1 . . . . . . . . . . . : 192.168.1.1
DNS Server 2 . . . . . . . . . . . : 192.168.1.1
together with my WPA key which I have checked is correct.I keep getting the following result:
wireless device : OK
local access : failed
Internet access : failed
When I do ipconfig/all I get the following:
Windows IP Configuration
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
I have in my basement a router (DLink DIR-655) which is connecting to our ISP, and I have cables running to wall jacks in the first floor. A wall jack which terminates in the living room I have connected to a switch, a DLink 10/100/1000 (DGS-1005G). To this I have my PS3 connected which can connect to the internet fine (although it seems to not get the same upload / download speeds other devices get) and my Sony Bravia TV (KDL-46Z5100). The PS3 registers as GB, while the TV 100MB (its port lights orange).
The problem is I can't get the TV to connect to the internet. If I try DHCP, it doesn't seem to find the DNS server (on another switch connected to the same router in a different room). If I hard code the IP address, still nothing.
I found that if I connect the TV directly into the wall, it can connect. It's just through the switch I'm having problems. Additionally, even I then plug it back into the switch and connect the switch to the wall jack, the connect continues to work. It just seems that i can't get it initialize when connected to the switch.
Last winter I bought a Sony Bravia KDL- 46EX710 DLNA LCD/LED TV it is connected to the internet through my Linksys WRT160Nv3 router via LAN, everything worked perfect when I stopped using it for the summer, this past week I turned it back on and tried to access my photos on my PC through the TV and it said it could not find the server, I have tried everything but to no avail. I have stopped my AVG antivirus and Windows firewall, still can't access the files on my PC, the PC's in the home can access each other over this router, even the internet is accessed by the TV over this router so the router and TV are connected but the TV can not access the computers over this router, I have tried a new ethernet cable and still nothing[CODE]
View 11 Replies View RelatedJust bought a Sony Bravia KDL-46EX723 today and i am currently trying to connect it to my BT home hub via a "wired set up". BT home hub does not seem to be detecting the TV at all, when i try to do an auto set up it searches for a while and then comes back with, cable connection:failed, local access:failed, internet access:failed.I have went on to my network page to see if it was connecting to anything else and it is finding my external hardrive no problem via the Ethernet cable.I have tried looking at my computer IP details and adding them manually to the TV, but no joy, just comes back with the same errors.
View 7 Replies View RelatedHD (1920x1080) TV sees and plays all SD mpg (720x576) stored on a Lacie network drive. Now working in HD (1920x1080) and find that the TV does not even see the mpg files, let alone play them. If I convert the HD files to SD they are then visible again. It seems odd that a HD TV cannot see and play HD videos.
View 2 Replies View RelatedOn instruction from reviews of the TV on amazon, i bought a TP-Link wireless range extender to set up as a client/repeater (not sure which to use) to connect wirelessly to my router in another room so i can connect an ethernet to the TV for online functions without an overpriced Sony wireless dongle.I connect the device to the router, assign a random IP in the same subnet as my lan (since it has the same default address as my router) and set the default gateway to my router's IP address (assuming this is what it is asking for) and set the device to either client or repeater mode (unsure of which i need so have tried both) and everything seems fine until this point. However, I set the device to WEP security and set the WEP key to the same as my router as the instructions say and my router instantly loses it's internet connection entirely and repeatedly tries to reconnect and fail until i disable WEP security on the wireless range extender, at which point it successfully reconnects.
View 4 Replies View RelatedI cannot make my Sony Bravia Connect to our Network using a Cat5 cable directly connected to the Router. (Netgear) The Wireless works just fine as both of our laptops and our son's Wii are connected without issue...I have rebooted everything multiple times, did a hard restore on the television. When we connect directly to the Modem. the TV will connect to the internet. But when we use the router.. No go..
View 3 Replies View RelatedI recently bought a Sony Bravia HD TV with wireless internet capabilities. When I try to connect to my wireless internet. The TV finds our wireless router name, but when we try to finally connect wirelessly it gives the following message: TV wi-fi found, local access failed and network access failed. The router we have is a Netgear PK500.
On the TV we have three differant ways for the tv to locate the router they are by scanning, the WPS button and by entering the WPS pin. We've tried all three and got the above message.
[code]....
I have had a Netgear WNDR3700 wireless router for over a year now, and have had no problems connecting to wireless devices (currently connects perfectly to: windows 7, OSX, Android, and Meego). I have recently purchased a Sony Bravia NX720, which has a built in wireless card. When I connect the television via LAN to the router the internet works fine, however when I connect via my wifi network (i.e. there is no physical connection between the tv and the router) I get the following message:
Connection Results
Wireless Device On TV: found
Local Access: OK
[Code].....
I'm attempting to network my 2007 Sony Bravia and connect to my BT Hub. Set's too old to have USB or DNLA but does have a vga input. Powerline plug system will give me net/pc access, with video and audio if I use an ethernet to vga adaptor at the back of the TV?
View 4 Replies View RelatedI have a Sony Bravia KDL46EX640 which comes with a wireless USB adapter. When I first bought this, I set up wireless network and it went fine. I was able to use the applications for video streaming.
I was trying it again now and it doesn't work. It seems like I can't even connect to my wireless network. I tried to set it up again but it can't find my wireless network. I have tried resetting the TV too (UP arrow + Power button on TV) and still doesn't work. Contacted Sony support but they didn't assist. I have a laptop and ipad connected to the router in the same room so signal is not a problem.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 6134 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 463782 MB, Free - 396406 MB; D: Total - 13154 MB, Free - 1850 MB;
Motherboard: PEGATRON CORPORATION, Benicia
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
I recently bought a Sony Bravia HD TV with wireless internet capabilities.When I try to connect to my wireless internet. The TV finds our wireless router name, but when we try to finally connect wirelessly it gives the following message: TV wi-fi found, local access failed and network access failed. The router we have is a Actiontech PK500.On the TV we have three differant ways for the tv to locate the router they are by scanning, the WPS button and by entering the WPS pin. We've tried all three and got the above message.
I just bought a "DLink Xtreme N Gigabit Router DIR-655" I configured it correctly. It works well for the wireless connection but my Lan connection (wired connection) does not work. The Lan computer connects to the router but cannot access the internet. All of my machines work OK with a Netgear G router, including the Lan computer.
View 9 Replies View RelatedI have problem with my Internet connection. Recently my Internet connection often get slow. There are 3 connections on the server running Windows Server 2003. 1st is External, 2nd is Internal and 3rd is VPN (please see attahement). There is nothing to do with External and Internal connections, and everytime the Internet connection get slow, I have to disconnection VPN (connection) and connect it again.
View 5 Replies View RelatedEvery time I boot up my computer, everything will be working fine for about 5 -10 minutes, but after this, all my browsers will lose connection to the Internet. All of them: IE, firefox, chrome, even the steam browser, all of them just lose connection.The weird thing is, my net connection is perfectly fine: I can still play online games, still use online chat services, still open and use programs like utorrent. It's like something is just blocking all my browser connections.When I run a network troubleshooter, it says "your computer appears to be correctly configured, but the device or resource (Microsoft Corporation: Software, Smartphones, Online, Games, Cloud Computing, IT Business Technology, Downloads) is not responding."I googled this and came across some apparent fixes like flushing and re-registering my dns and restarting my modem, niether of which has worked.In addition, this problem is showing up on two totally separate shared networks and has only affected my computer. Other netwworked devices, like friends/families computers and my iPhone (which I am using to type this) work fine.
View 1 Replies View RelatedMy hp laptop will no longer connect to the internet thru both a wifi connection or cable connection. I've also tried to do a system restore to an earlier date and it will not let mme do this either
View 4 Replies View Relatedwireless internet connection connected no bit it says no internet access what is the problem
View 1 Replies View RelatedI have a desktop computer that I have used for years and it has always worked just fine. We have AT&T (DSL, not cable) and it used to connect just fine but then I moved out, left everything plugged in exactly as it was and when I came back it wouldn't connect.It connects to the LAN but not to the internet. When I go in cmd to type ipconfig the DNS suffix is blank on that computer but says gateway.2wire.net on my wireless laptop. I eventually disabled UPnP on it because that's what alot of people were saying fixed the problem but it didn't fix anything. All it did was make the Internet Gateway Connection box disappear.Originally it was plugged in like so: Cable from wall > Cable Box > PC Now it is hooked up like this: Data cable from wall > DSL > Router > PC It stopped working BEFORE it was switched to DSL so that isn't the problem The DSL we have is "AT&T 2701HG-B 2Wire Wireless Gateway DSL Router Modem" and the Router it is plugged into that goes to my PC is a Linksys Wireless Router Model WRT54GS The PC is Windows XP Home, SP2?
View 19 Replies View RelatedCase: My home has few laptops and mobile phones connected wireless to the home's Router -> & to cable modem.
Problem: When I turn-on this particular HP's PC and connect to the internet (wireless) - the whole house internet connection becomes intermittent (e.g. OFF / ON). The Internet connection is fine (no problem), if this PC is not connected to the Internet (not connected to ie or google).
Trouble Shoot (without success)
- I have reformatted the PC and scan the PC with Malware in safe mode (no infection).
Ive been having a problem for the past few days that seems to be "unfixable" ,When I googled for it I found somone on this forum had the same problem , but none of the solutions that were listed were able to work for me. ( virus , restore comp , process causing it )The topic im talking about is 2wire Ethernet Light Blinking -Very- Rapidly + other problemsIm having the same exact problem as this guy and have the same modem. The internet will go down , and come back up in like 20seconds or so. Also at times I will experience heavy heavy lag. What I noticed is when the internet goes down , the Ethernet light stops blinking and is turned off , once the light turns green , it starts working again.his problem occures on all the comps in my house , some hooked up via wire and some wireless
View 7 Replies View RelatedI recently moved into a new place and my internet's been very spotty at best. The internet seems very fast at times but slows down, and even completely stop working, at other times. The weird thing is that my computer never says I'm disconnected from the internet. Instead, I either get disconnected from my games or the webpages I try to load show that it "cannot be displayed." The place I moved into provides wall jacks for a T-1 internet connection. I've tried directly connecting the ethernet cable to my desktop/laptop as well as connecting it to a router and trying out the wireless, all to no avail. The problem only seems to be resonating from where I'm currently living, as when I go onto campus, the wireless is fine.Also tried turning off firewalls, using a different browser, resetting the router, and a new ethernet cable.
View 5 Replies View RelatedI have a desktop that had issues, so I cleaned the hard disk and reinstalled the software like when it was new. I have updated all the windows and network card updates.When I first start the computer, I can connect to the internet for about 2-5 minutes then lose the connection. Often, internet explorer shows a screen that says the site is busy and try again later, but we can connect fine on other computers. Our internet connection comes from a DSL modem to a Cisco Valet Plus wireless router, however this computer is connected by a hard wire to a port on the router. I have changed ports, but have the same issue. The computers connected wirelessly stay connected.
I can restart the computer and the internet will work for 2-5 minutes again, but then do the same. If I go to ipconfig and release and renew, it still will not connect to the internet.
The other day I got a new Combo Modem/Wireless Router. I hooked it up and installed it as per Comcast's instructions. I have a Desktop PC running XP and a Laptop PC running Windows 7.I cannot get an internet connection up on either PC, although I am showing a Good Connection Signal on both my PC's.Called Comcast Tech and he pinged and said connection was good on THEIR end, and that Problem was on my end.I'm running Internet Explorer as my Browser on each PC.
View 2 Replies View RelatedProbably something easy but my brains are fried.Background :A network has about 6 machines connected to it with no internet connection3 machines connected to wireless router which has internet.Forsome reason, the machines that have both network connections, use the wired connection to access internet no matter what.When I disable the wired connection, it uses the wireless internet connection.How do I run both networks without disabling any, but tell the machines to use the wireless connection when needed to access internet?
View 1 Replies View RelatedMy PC can pick up my and connect to my wireless network but i still can't use the internet. This has just happened randomly, i haven't changed anything in my entire setup. There is a Laptop, an xbox and another Desktop along with an ipod and ipad that are all functioning properly whilst being connected to the same network. I also have an xbox in my room next my PC which is having the same issue, it picks up xbox live but nothing works. Perhaps the issues are connected or share a common problem? either way it has left me stumped .I've power cycled multiple times, uninstalled and reinstalled my wireless receiver a even tryed using a brand new one. I called telstra (my isp) and they said they can't do anything because the receiver i use is not from telstra. I can use a wired connection fine its just the wireless, however it needs to stay wireless as i'm on the 2nd story of my house and my modem is on the first story. here are my results from ipconfig /all. [code]
View 11 Replies View RelatedHave an Inspiron 1150 laptop & have excellent wireless connection. Can receive email but IE will not connect. It connected fine in the past but I upgraded files and now it will not. I went to IE 8 but managed to remove it back to IE 6 but still no connection.
View 1 Replies View RelatedI get cut off after about an hour online. I have cable internet and they have been out to check. I have a new modem from the company. They have put the modem on a separate wire but the problem continues.
View 1 Replies View Relatedi dont have any enternet conection, in the network conection there is no sighn of local area conection or wierles conection, what should i do?
View 1 Replies View Related