Bravia DLNA Can't Access PC Through Router?
Sep 19, 2011
Last winter I bought a Sony Bravia KDL- 46EX710 DLNA LCD/LED TV it is connected to the internet through my Linksys WRT160Nv3 router via LAN, everything worked perfect when I stopped using it for the summer, this past week I turned it back on and tried to access my photos on my PC through the TV and it said it could not find the server, I have tried everything but to no avail. I have stopped my AVG antivirus and Windows firewall, still can't access the files on my PC, the PC's in the home can access each other over this router, even the internet is accessed by the TV over this router so the router and TV are connected but the TV can not access the computers over this router, I have tried a new ethernet cable and still nothing[CODE]
View 11 Replies
ADVERTISEMENT
Nov 14, 2011
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 6134 Mb
Graphics Card: Intel(R) G33/G31 Express Chipset Family, 256 Mb
Hard Drives: C: Total - 463782 MB, Free - 396406 MB; D: Total - 13154 MB, Free - 1850 MB;
Motherboard: PEGATRON CORPORATION, Benicia
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
I recently bought a Sony Bravia HD TV with wireless internet capabilities.When I try to connect to my wireless internet. The TV finds our wireless router name, but when we try to finally connect wirelessly it gives the following message: TV wi-fi found, local access failed and network access failed. The router we have is a Actiontech PK500.On the TV we have three differant ways for the tv to locate the router they are by scanning, the WPS button and by entering the WPS pin. We've tried all three and got the above message.
View 7 Replies
View Related
Jan 23, 2011
I cannot make my Sony Bravia Connect to our Network using a Cat5 cable directly connected to the Router. (Netgear) The Wireless works just fine as both of our laptops and our son's Wii are connected without issue...I have rebooted everything multiple times, did a hard restore on the television. When we connect directly to the Modem. the TV will connect to the internet. But when we use the router.. No go..
View 3 Replies
View Related
Dec 12, 2012
I have in my basement a router (DLink DIR-655) which is connecting to our ISP, and I have cables running to wall jacks in the first floor. A wall jack which terminates in the living room I have connected to a switch, a DLink 10/100/1000 (DGS-1005G). To this I have my PS3 connected which can connect to the internet fine (although it seems to not get the same upload / download speeds other devices get) and my Sony Bravia TV (KDL-46Z5100). The PS3 registers as GB, while the TV 100MB (its port lights orange).
The problem is I can't get the TV to connect to the internet. If I try DHCP, it doesn't seem to find the DNS server (on another switch connected to the same router in a different room). If I hard code the IP address, still nothing.
I found that if I connect the TV directly into the wall, it can connect. It's just through the switch I'm having problems. Additionally, even I then plug it back into the switch and connect the switch to the wall jack, the connect continues to work. It just seems that i can't get it initialize when connected to the switch.
View 1 Replies
View Related
Mar 27, 2011
How can I set up my TV to accept video media via wifi from DLNA router from my lap top?
View 4 Replies
View Related
Jan 23, 2011
Is the E4200 DLNA certified? The spec indicates a "UPnP AV media server" but mentions nothing about DLNA. Cisco is a member of DLNA, so what gives? Will DLNA devices like blu-ray players work with the E4200 and be able to stream media from a USB drive attached to the router?
View 9 Replies
View Related
Nov 1, 2010
I have a issue with using a Media Server in my WRT160NL. I have tried several firmwares, but issue exists in all firmwares.I tried to play files on my Samsung LCD TV with embedded media player (this player can play files from USB storage or from DLNA servers). I have several video files in mkv and avi format. My TV has wireless connection to router (270Mbit). And I have the following situation:1. I write these files on USB drive, plug to TV, play in embedded player - all OK.2. I have a samsung DLNA server on PC and try to play the same files from PC via network - all OK. (My network - PC to WRT160NL via cable, TV and some other devices via WiFi, but in this time only TV via WiFi.)3. I plug the same USB drive with same files to WRT160NL, go to settings and enable Media Server, choose two folders for scan (one for MKV, one for AVI), scan it. I run player on TV, choose WRT160NL. TV can see all video files, but:- when I try to play mkv file - I have error after several seconds "the unsupported file format"- when I try to play avi file - it plays, but after 20-40 seconds I have error "WRT160NL is disconnected".What is wrong with DLNA server in WRT160NL? Because from other server via router all OK. USB drive in NTFS format, maybe I need to use a ext3 or other file system for DLNA?
View 2 Replies
View Related
Jan 13, 2013
The new firmware is killing the video streaming performance I have to revert to the old firmware Ver.1.1.28.146072 to be able to stream videos from the media server. I have been waiting a long time for a decent Firmware that will fix the multiple issues with this router but this is ridiculous every new firmware update brings more issues to the table I am feed up with the Cisco developers I have a WRT610N router that is performing better than this lemon router that Cisco just introduced in 2012.
View 2 Replies
View Related
Oct 1, 2010
I have an NTFS formatted USB disk drive (Western Digital My Passport Essential Black 320 GB WDBAAA3200ABK) attached to the WRT160NL wireless router (Firmware Version 1.0.02), and I have video, picture and music files on the USB disk drive in three folders: Videos, Music, Pictures. Auto-scan is disabled, I scan the media files manually by clicking on the 'Scan All' button.
PROBLEM 1 The worst problem is that the router is very sensitive to files that can't be recognized by the router as media files. For example if there are subtitle files (*.str) between the media files, then strange and nondeterministic things happen: some valid media files are skipped and not included in the media database; some files included but the file names are mixed. The most irritating in the bug is that there is no log file, where you could find the problem, and so you never know which file cause the problem, and you have to browse through all the files hunting for the cause.
PROBLEM 2 When the router is in the process of scanning the media files, then the internet (WAN) connection often can't be used, although the router can be accessed and the status says it is connected to the internet.
View 4 Replies
View Related
Aug 1, 2012
I'm very disappointed with this EA4500 DLNA feature this is one of the main reasons why i got this router.My Sammy TV can detect the USB that is attached and is able to view the files in the drive but when you play any video file larger than 1gb it does not work even shuts down my TV.Only on smaller files does it work flawlessly I know its not the TV because I have played those files on my previous Router (Netgear WNDR3800) and they even work when i connect the hard drive directly to the TV has any one else had this issue happen to them?
View 9 Replies
View Related
May 28, 2012
I am trying to stream movies and music to my Panasonic TV. I have a USB hard drive connected to the EA4500.
The TV sees the media on the device and music plays fine. However, every movie I've tried shows up with an exclamation point and when I try to play it I get a message to the effect that "unable to open media". Is the EA4500 media server only compatible with certain movies?
View 9 Replies
View Related
Jul 9, 2012
dlna server of ea4500 does not supports time seeking? No rewind? I have tryed to plug usb-flash with video files for testing before buying an external HDD and... REALLY no time seeking?
View 3 Replies
View Related
Sep 28, 2011
New firmware for the Linksys E4200 was released this morning that adds certification for DLNA, IPv6 Gold log, and UPnP. It also addresses the Media Server issues that have been identified here in the community.Sept 28, 2011Last Firmware version: 1.0.03 (build 14)- Added supports of Native IPv6 over PPPoE Internet connection when only keep alive option is selected.- Added supports of Native IPv6 on guest network if there are more than two available IPv6 subnets- Added supports of Native IPv6 on Parental Control- Added supports of 3TB Hard drive with NTFS and HFS+ format- Improved firmware upgrade stability- Improved IPv6 WAN performance- Fixed media server unstable issue- Fixed Cisco LED flashing issue- Fixed some minor bugs- DLNA certified- IPv6 Gold logo certified- UPnP certified
View 1 Replies
View Related
Apr 3, 2012
I cannot get Internet connection to my Bravia tv. I have directv as well as century link for my ISP. Dirctv blames Century link for the problem. Century link blames Directv. Also, recently bought a MacPro laptop. Am having trouble connecting my printer (hp6500 series) as well as my Blackberry Bold cell phone so I can sync it.
View 3 Replies
View Related
Sep 13, 2011
I'm having an issue with my Sony Bravia 3D TV. It has wireless built in LAN and I've been using it to connect wirlessly through my router. A few days ago it just stopped connecting. I had the network setting on my TV for the IP adress on auto, but I input manual settings (router ip adress) to see if it would work, no success. Everytime I try and connect it says
wirless device- ok
local access- failed
internet access failed
I can use the internet with my computer/phone/portable gaming device, just not the TV. I tried disabling my firewall on my computer to see if it was causing an issue but that didn't work. My router is a gateway 2wire and my computer is a windows vista laptop.I went ahead and did the ipconfig as I suspect it'll be needed?
Windows IP Configuration
Host Name . . . . . . . . . . . . : Alyssa-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
[code]....
View 5 Replies
View Related
Mar 30, 2013
i seem to be having problems connecting to the wireless set up on my sony bravia tv.
Connections results
Wireless device on tv found
Local access failed
Internet access failed
View 5 Replies
View Related
Jun 9, 2012
Just bought a Sony Bravia KDL-46EX723 today and i am currently trying to connect it to my BT home hub via a "wired set up". BT home hub does not seem to be detecting the TV at all, when i try to do an auto set up it searches for a while and then comes back with, cable connection:failed, local access:failed, internet access:failed.I have went on to my network page to see if it was connecting to anything else and it is finding my external hardrive no problem via the Ethernet cable.I have tried looking at my computer IP details and adding them manually to the TV, but no joy, just comes back with the same errors.
View 7 Replies
View Related
Mar 24, 2013
HD (1920x1080) TV sees and plays all SD mpg (720x576) stored on a Lacie network drive. Now working in HD (1920x1080) and find that the TV does not even see the mpg files, let alone play them. If I convert the HD files to SD they are then visible again. It seems odd that a HD TV cannot see and play HD videos.
View 2 Replies
View Related
Jul 2, 2011
Is there a way to get the Internet onto my TV (Sony Bravia DL-46W2000), or do I have to buy a new Internet-enabled one? If so, what's the best one which is most Interneted - or are they all the same?I've heard about TV dongles that maybe can do WiFi to my router?There's no Ethernet or USB socket on the TV; just S VHS/Hi8/DVC; HDMI; SCART; and DVD player sockets.
View 1 Replies
View Related
Jan 16, 2013
Connected via wireless. All ok and says have Internet connection, but cannot access any video content' I.e. iplayer, etc. when check via refresh internet content (as Sony recommend) says "configuration failed while connecting. The system has encountered an error. If problem persists contact Sony (5006)". Sony say wireless strength insufficient, but when tried wired set up be relocating NETGEAR router gives same error message. Have NETGEAR wireless extender good signal with full connectivity via laptop, iPad and iPhone. Also when try server display settings says servers cannot be recognised. When go to options and select update list repeats "servers cannot be recognised. Have checked all IP etc and same as on laptop:
IP Address:192.168.0.11
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1?
View 13 Replies
View Related
Dec 26, 2011
I think there is a bug in the DPC3825.I use UPnP media servers and renderers in my home network.For some reason both the client and server have to be on the same side of the wireless / wired bridge.If the client is on the wireless side then the server also has to be on the wireless side.If the client is on the wired side then the server has to be on the wired side.Having a bit of knowledeg of the UPnP protocol I suspect that UDP broadcasts are not traversing the wired / wireless bridge.thus breaking the SSDP protocol that is used by UPnP and DNLA systems.I have no control over the product that my ISP uses and they seem to have no control over what Cisco does with its 'issues'.
View 0 Replies
View Related
Jan 29, 2012
I've just bought a Sony Bravia with in-built wireless connectivity but I cannot get it to connect to the internet.I have a Talk Talk dlink DSL2640R wireless router I have entered the following settings manually in to the tv:
IP Address . . . . . . . . . . . : 192.168.1.50
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Server 1 . . . . . . . . . . . : 192.168.1.1
DNS Server 2 . . . . . . . . . . . : 192.168.1.1
together with my WPA key which I have checked is correct.I keep getting the following result:
wireless device : OK
local access : failed
Internet access : failed
When I do ipconfig/all I get the following:
Windows IP Configuration
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
View 6 Replies
View Related
May 7, 2011
On instruction from reviews of the TV on amazon, i bought a TP-Link wireless range extender to set up as a client/repeater (not sure which to use) to connect wirelessly to my router in another room so i can connect an ethernet to the TV for online functions without an overpriced Sony wireless dongle.I connect the device to the router, assign a random IP in the same subnet as my lan (since it has the same default address as my router) and set the default gateway to my router's IP address (assuming this is what it is asking for) and set the device to either client or repeater mode (unsure of which i need so have tried both) and everything seems fine until this point. However, I set the device to WEP security and set the WEP key to the same as my router as the instructions say and my router instantly loses it's internet connection entirely and repeatedly tries to reconnect and fail until i disable WEP security on the wireless range extender, at which point it successfully reconnects.
View 4 Replies
View Related
Jul 3, 2012
I recently bought a Sony Bravia HD TV with wireless internet capabilities. When I try to connect to my wireless internet. The TV finds our wireless router name, but when we try to finally connect wirelessly it gives the following message: TV wi-fi found, local access failed and network access failed. The router we have is a Netgear PK500.
On the TV we have three differant ways for the tv to locate the router they are by scanning, the WPS button and by entering the WPS pin. We've tried all three and got the above message.
[code]....
View 1 Replies
View Related
Jun 22, 2012
I have had a Netgear WNDR3700 wireless router for over a year now, and have had no problems connecting to wireless devices (currently connects perfectly to: windows 7, OSX, Android, and Meego). I have recently purchased a Sony Bravia NX720, which has a built in wireless card. When I connect the television via LAN to the router the internet works fine, however when I connect via my wifi network (i.e. there is no physical connection between the tv and the router) I get the following message:
Connection Results
Wireless Device On TV: found
Local Access: OK
[Code].....
View 7 Replies
View Related
Sep 11, 2011
I'm attempting to network my 2007 Sony Bravia and connect to my BT Hub. Set's too old to have USB or DNLA but does have a vga input. Powerline plug system will give me net/pc access, with video and audio if I use an ethernet to vga adaptor at the back of the TV?
View 4 Replies
View Related
Dec 29, 2012
I have a Sony Bravia KDL46EX640 which comes with a wireless USB adapter. When I first bought this, I set up wireless network and it went fine. I was able to use the applications for video streaming.
I was trying it again now and it doesn't work. It seems like I can't even connect to my wireless network. I tried to set it up again but it can't find my wireless network. I have tried resetting the TV too (UP arrow + Power button on TV) and still doesn't work. Contacted Sony support but they didn't assist. I have a laptop and ipad connected to the router in the same room so signal is not a problem.
View 3 Replies
View Related
Jan 16, 2012
I am having a major issue trying to connect my Windows 7 HP Netbook to my Xbox 360 over either Twonky/Serviio or Windows Media Centre. The Xbox just isn't picking up my computer, my homegroup recognises the Xbox and it is 'Allowed' to share media, but when I test my PC connection within the Xbox dashboard, it fails to connect to PC. My network is wireless.The strange thing is I have TwonkyServer Mobile running on my Android phone and that was found by my Xbox immediately with no need to change settings or search for devices. It streams media just fine from my phone. This leaves me thinking that it is an issue with my PC as opposed to my router, I have double checked my router settings (Sagem 2304), UPnP is showing as enabled, I've reset and unchecked/rechecked the UPnP but still not working.
My TwonkyMobileServer is also unable to find my PC server although I have been able to find my MobileServer in Windows Media Player and stream media from my phone.Windows Firewall has been disabled, I've also Uninstalled my antivirus software, Avast and AVG, although AVG doesn't seem to want to disappear that easily and is still lurking in my System Tray telling me i've 'Lost protection'...Norton Internet Security is also lurking around which is odd, I can not recall installing it! It doesn't seem to be a fully installed version and doesn't seem to want to be uninstalled. Could these AV software and supposed Internet Security software be holding me back?This leaves me thinking that my PC is holding back my Network. Is there any thing I haven't thought of? Would it be the Anti-virus leftovers ruining my streaming dreams??
View 1 Replies
View Related
May 21, 2012
I cannot see my synology NAS from my WDTV Live players (or PS3 or Samsung TV) when the NAS connected directly to one of the 4 GbE ports on the 655 using media server (DLNA) protocol. I've moved the NAS to another location on my network and not directly connected to the 655 and all the other media players see it except for the WD that's connected to one of the ports on the back of the 655. As a work-around, I have set the WD player that's connected to the 655 to use network shares instead of DLNA and this seems to work fine. So, there must be something that the 655 is doing wrt the DLNA protocal that is blocking communications.I have the 655 configured as an access point and have turned off DHCP and every other function that could be causing any issues. I've turned UPNP on and off to see if it resolves the problem, and although it seems to have some bearing on the problem, the issue persists. I also have a DIR-645 also configured as an access point (not connected to the 655) and have the synology NAS connected directly to it and it works just fine. All media players can see the NAS except for the one that's connected to the 655.I've been having this issue for some time now and have worked around it by moving the 655 so it wouldn't be an issue. However, I needed the wireless and gigabit switch capability upstairs and am battling this issue once again. I'd really like to keep the 655 and get this working, but it seems as the 655 is the culprit here.
View 5 Replies
View Related
Feb 5, 2012
I've bought a LG HR536D Blu-ray player w/ HDD, and it has DLNA compability, but is well out of range for a wired connection to my wireless router. So, I thought since that all the things that I'd like to watch are on my laptop (Win 7 64-bit) which is in the same room, within reach for an ethernet connection. I have plugged in the ethernet cable, but predictably, they won't talk to each other. And I have no idea how to make them do so. I messed around with matching the IP Addresses, and Bridging the connection with my Wireless connection, but to no avail.
View 1 Replies
View Related
Nov 19, 2012
I currently have a HDD connected to my Netgear Router which acts as a media server using Mini DNLA. It is picked by the XBox 360 over the wired network and also by other media streaming gadgets (o2 Jogglers) over the wireless network. What I am looking for is a gadget that would enable me to stream to a TV's HDMI input. It needs to be able to detect the mini DNLA server either wirelessly or via LAN and then connect to the TV's HDMI input. Does such a standalone gadget exist?
View 1 Replies
View Related
Apr 9, 2012
I recently purchased a Sony Bravia KDL-60EX720, and I am having issues connecting it to my DLNA network running on my Mac. I have my router set up to allow uPNP and the TV is set up to allow rendering and automatically look for my network. No matter how many different ways I try...I still can't seem to figure out why the one device cannot see the other!
I am running Serviio 0.6.2. I checked the firmware on the router, and everything seems up to date.
View 1 Replies
View Related
Apr 8, 2013
I want to set up a DLNA server (asus MB) to stream TV to my Sony Bravia (N based wifi) unit. I have a dir-655 (wonderful router) and am wondering if it will work to pass DLNA signals thru. It is hardware version A4 and firmware version 1.21... Will I need to upgrade the firmware? Can I get an HD signal?
View 1 Replies
View Related
