Cisco WAN :: Using DLNA With DPC3825?
Dec 26, 2011
I think there is a bug in the DPC3825.I use UPnP media servers and renderers in my home network.For some reason both the client and server have to be on the same side of the wireless / wired bridge.If the client is on the wireless side then the server also has to be on the wireless side.If the client is on the wired side then the server has to be on the wired side.Having a bit of knowledeg of the UPnP protocol I suspect that UDP broadcasts are not traversing the wired / wireless bridge.thus breaking the SSDP protocol that is used by UPnP and DNLA systems.I have no control over the product that my ISP uses and they seem to have no control over what Cisco does with its 'issues'.
View 0 Replies
ADVERTISEMENT
Aug 26, 2011
I got a new modem today (a Cisco DPC3825) and it seems to be presenting a problem. I used to be able to simply and quickly change my IP address, by changing the MAC address though my Netgear router. Now when I do that, I can see the IP address has changed in the router settings, but when I double check it using ipburger.com, the IP address does NOT actually change, but remains the same.
View 4 Replies
View Related
Jun 20, 2012
i m trying to connect two routers a Cisco DPC3825 (r1) and DIR-655 (r2) and at the end getting the error. i have disabled the SPI firewall on r1 and connected an ethernet cable lan to lan between the two. i don't want to confuse with whatever the mess i have done previously,Tell step by step what i should do to connect these two routers.PS: in addition, the gateway ip of r1 is 192.168.0.1 with subnet mask of 255.255.254.0 and the gateway ip of r2 is 192.168.0.2 with subnet mask of 255.255.255.0. r1 has a ip range of 192.168.0.10 to 192.168.0.128 while r2 has range of 192.168.0.100 to 192.168.0.199.
View 7 Replies
View Related
Mar 27, 2012
I recently upgraded, through my ISP, my high-speed modem to the DPC3825 model modem/router. But when I try to connect to the DLink switch, the modem freezes, and doesn't recognize it. My previous setup was modem, to my DLink router (DIR 615), to my switch. With my new setup, I just bypassed the DLink router, because my new modem includes router capability.Is there some compatibility issue between the new modem and the DLink switch?
View 1 Replies
View Related
Nov 4, 2011
I have a DPC3825 from Shaw Cable in Canada. I'd like to use my Airport Extreme as a repeater using WDS. I've clicked the checkbox for "Allow wireless signal to be repeated by a repeater" and entered my Airport's MAC Address, but my Airport Base station doesn't see it as a WDS Peer.
View 1 Replies
View Related
Feb 13, 2013
I have a Cisco DPC3825 and i don't know how to port forward it i want to port forward so i can host my server without hamachi?
View 1 Replies
View Related
Apr 29, 2013
Just got a Cisco DPC3825 from my ISP. I need to connect my other desktops to the wireless router all over the house and have two questions.
1. What is the best wireless adapter to use so my other desktops will be able to access the router?
2. What is the distance of signal before I need a signal booster and if I do need to boos the signal, what is the best device to do that? (we stream video, music, light gaming and general internet applications).
View 2 Replies
View Related
Jan 6, 2013
I am trying to figure out whyt my DPC3825 does not maintain a FTP session I did not really want to post this message rather I am trying to figure out how to search this board.
View 1 Replies
View Related
Nov 13, 2010
NIB DPC3825 cable modem. Called my provider and got it provisioned and its working (I'm on an ethernet connection posting this). But when I http to 192.168.0.1, I get a screen that doesn't quite look like the one in the manual. I enter the "admin" and "W2402" and click login, and the screen refreshes but nothing happens (no configuration options, only able to check status of downstream and upstream channels). Pushing the factory reset button for ten seconds to load defaults makes the lights blink and then reboots; same result as above. Pushing the wireless config button has no effect at all.
View 3 Replies
View Related
Jan 9, 2013
I got a problem with my router CISCO (DPC3825) where the eithernet is working properly and the wireless is not, and I had to plug the usb to make the setups, and suddenly the wireless was working but when I tried to reset the password something worng happened change the set of the wireles
View 2 Replies
View Related
Sep 19, 2011
Last winter I bought a Sony Bravia KDL- 46EX710 DLNA LCD/LED TV it is connected to the internet through my Linksys WRT160Nv3 router via LAN, everything worked perfect when I stopped using it for the summer, this past week I turned it back on and tried to access my photos on my PC through the TV and it said it could not find the server, I have tried everything but to no avail. I have stopped my AVG antivirus and Windows firewall, still can't access the files on my PC, the PC's in the home can access each other over this router, even the internet is accessed by the TV over this router so the router and TV are connected but the TV can not access the computers over this router, I have tried a new ethernet cable and still nothing[CODE]
View 11 Replies
View Related
Jan 16, 2012
I am having a major issue trying to connect my Windows 7 HP Netbook to my Xbox 360 over either Twonky/Serviio or Windows Media Centre. The Xbox just isn't picking up my computer, my homegroup recognises the Xbox and it is 'Allowed' to share media, but when I test my PC connection within the Xbox dashboard, it fails to connect to PC. My network is wireless.The strange thing is I have TwonkyServer Mobile running on my Android phone and that was found by my Xbox immediately with no need to change settings or search for devices. It streams media just fine from my phone. This leaves me thinking that it is an issue with my PC as opposed to my router, I have double checked my router settings (Sagem 2304), UPnP is showing as enabled, I've reset and unchecked/rechecked the UPnP but still not working.
My TwonkyMobileServer is also unable to find my PC server although I have been able to find my MobileServer in Windows Media Player and stream media from my phone.Windows Firewall has been disabled, I've also Uninstalled my antivirus software, Avast and AVG, although AVG doesn't seem to want to disappear that easily and is still lurking in my System Tray telling me i've 'Lost protection'...Norton Internet Security is also lurking around which is odd, I can not recall installing it! It doesn't seem to be a fully installed version and doesn't seem to want to be uninstalled. Could these AV software and supposed Internet Security software be holding me back?This leaves me thinking that my PC is holding back my Network. Is there any thing I haven't thought of? Would it be the Anti-virus leftovers ruining my streaming dreams??
View 1 Replies
View Related
May 21, 2012
I cannot see my synology NAS from my WDTV Live players (or PS3 or Samsung TV) when the NAS connected directly to one of the 4 GbE ports on the 655 using media server (DLNA) protocol. I've moved the NAS to another location on my network and not directly connected to the 655 and all the other media players see it except for the WD that's connected to one of the ports on the back of the 655. As a work-around, I have set the WD player that's connected to the 655 to use network shares instead of DLNA and this seems to work fine. So, there must be something that the 655 is doing wrt the DLNA protocal that is blocking communications.I have the 655 configured as an access point and have turned off DHCP and every other function that could be causing any issues. I've turned UPNP on and off to see if it resolves the problem, and although it seems to have some bearing on the problem, the issue persists. I also have a DIR-645 also configured as an access point (not connected to the 655) and have the synology NAS connected directly to it and it works just fine. All media players can see the NAS except for the one that's connected to the 655.I've been having this issue for some time now and have worked around it by moving the 655 so it wouldn't be an issue. However, I needed the wireless and gigabit switch capability upstairs and am battling this issue once again. I'd really like to keep the 655 and get this working, but it seems as the 655 is the culprit here.
View 5 Replies
View Related
Feb 23, 2013
I would like to know what ip addresses I should see in this table. Shouldn't my default gateway IP have the same mac address as my computer or router? There are 2 different ip address/mac addresses from different a ISP than mine. I have a cisco DPC3825..I suspect a someone is spoofing my DNS.
View 4 Replies
View Related
Feb 5, 2012
I've bought a LG HR536D Blu-ray player w/ HDD, and it has DLNA compability, but is well out of range for a wired connection to my wireless router. So, I thought since that all the things that I'd like to watch are on my laptop (Win 7 64-bit) which is in the same room, within reach for an ethernet connection. I have plugged in the ethernet cable, but predictably, they won't talk to each other. And I have no idea how to make them do so. I messed around with matching the IP Addresses, and Bridging the connection with my Wireless connection, but to no avail.
View 1 Replies
View Related
Nov 19, 2012
I currently have a HDD connected to my Netgear Router which acts as a media server using Mini DNLA. It is picked by the XBox 360 over the wired network and also by other media streaming gadgets (o2 Jogglers) over the wireless network. What I am looking for is a gadget that would enable me to stream to a TV's HDMI input. It needs to be able to detect the mini DNLA server either wirelessly or via LAN and then connect to the TV's HDMI input. Does such a standalone gadget exist?
View 1 Replies
View Related
Apr 9, 2012
I recently purchased a Sony Bravia KDL-60EX720, and I am having issues connecting it to my DLNA network running on my Mac. I have my router set up to allow uPNP and the TV is set up to allow rendering and automatically look for my network. No matter how many different ways I try...I still can't seem to figure out why the one device cannot see the other!
I am running Serviio 0.6.2. I checked the firmware on the router, and everything seems up to date.
View 1 Replies
View Related
May 24, 2011
I am looking to permanently reset the default remote management port of the MODEM DPC3825 to something other than 8080. how to PERMANENTLY change the port from 8080? In the web interface under administration I have several times set it to something else other than the defaulted 8080 but when the modem is rebooted or reset, it goes back to the default 8080.
View 4 Replies
View Related
Dec 17, 2012
Recently installed a new CISCO DPC3825 and set up for wireless. I can connect to the network, signal strength excellent, but NO Internet. i have read a few threads showing similar issues, but i am getting lost when i try to troubleshoot further. i ran a command 'ipconfig/all' and got some data. I am confused also as under my network adapter it says 'media disconnected' .
View 1 Replies
View Related
Mar 27, 2011
How can I set up my TV to accept video media via wifi from DLNA router from my lap top?
View 4 Replies
View Related
Jan 23, 2011
Is the E4200 DLNA certified? The spec indicates a "UPnP AV media server" but mentions nothing about DLNA. Cisco is a member of DLNA, so what gives? Will DLNA devices like blu-ray players work with the E4200 and be able to stream media from a USB drive attached to the router?
View 9 Replies
View Related
Apr 8, 2013
I want to set up a DLNA server (asus MB) to stream TV to my Sony Bravia (N based wifi) unit. I have a dir-655 (wonderful router) and am wondering if it will work to pass DLNA signals thru. It is hardware version A4 and firmware version 1.21... Will I need to upgrade the firmware? Can I get an HD signal?
View 1 Replies
View Related
Nov 25, 2012
Router: F7D8301 v1 (firmware is up to date)I recently plugged a 2tb external hdd into one of the usb ports of the router. I have the video mover box checked and when it is, I can see the LaCie hard drive under network locations drive z in My Computer (Windows 7). I can open it and explore it, and see the media on the drive. But when I use one of the DLNA devices in my house (Vizio smart tv, Roku, and PS3) the only drive that shows up is the router's root file "Play N600 HD Dual video oot" not the LaCie drive or any of the contents. Is there any way to share the contents of the USB drive with these devices?
View 1 Replies
View Related
Nov 1, 2010
I have a issue with using a Media Server in my WRT160NL. I have tried several firmwares, but issue exists in all firmwares.I tried to play files on my Samsung LCD TV with embedded media player (this player can play files from USB storage or from DLNA servers). I have several video files in mkv and avi format. My TV has wireless connection to router (270Mbit). And I have the following situation:1. I write these files on USB drive, plug to TV, play in embedded player - all OK.2. I have a samsung DLNA server on PC and try to play the same files from PC via network - all OK. (My network - PC to WRT160NL via cable, TV and some other devices via WiFi, but in this time only TV via WiFi.)3. I plug the same USB drive with same files to WRT160NL, go to settings and enable Media Server, choose two folders for scan (one for MKV, one for AVI), scan it. I run player on TV, choose WRT160NL. TV can see all video files, but:- when I try to play mkv file - I have error after several seconds "the unsupported file format"- when I try to play avi file - it plays, but after 20-40 seconds I have error "WRT160NL is disconnected".What is wrong with DLNA server in WRT160NL? Because from other server via router all OK. USB drive in NTFS format, maybe I need to use a ext3 or other file system for DLNA?
View 2 Replies
View Related
Dec 23, 2011
I want to setup my home network to run a DLNA server for videos, music, etc. I know that there are many new routers and NAS devices out there that now have the capability to run a DLNA server built-in. My question is, which would provide a better DLNA server: one that is built into the router or one that is built into the NAS device?
View 3 Replies
View Related
Apr 28, 2011
I have the above router with a WD 1TB HDD plugged into the USB port. Is there anyway I can make this setup into a DLNA media server?
View 1 Replies
View Related
Feb 1, 2012
I have CISCO DPC3825 router and theres about 3 computers and 2 wireless devices using internet through it. When i connect to a online video game I get these mini-disconnects. It happens periodically and frequently I'm not sure what is causing it.
View 1 Replies
View Related
Sep 20, 2012
i have a dpc3825 cable mdem gateway i spent 4 hours on the phone with charter yesterday i cant access the admin part of the router i go to 192.168.0.1 and up comes the setup username and password i have reset it numerous times i have left it blank as per instructions i have tried admin and blank cusadmin and password i cant get in
View 1 Replies
View Related
Jan 13, 2013
The new firmware is killing the video streaming performance I have to revert to the old firmware Ver.1.1.28.146072 to be able to stream videos from the media server. I have been waiting a long time for a decent Firmware that will fix the multiple issues with this router but this is ridiculous every new firmware update brings more issues to the table I am feed up with the Cisco developers I have a WRT610N router that is performing better than this lemon router that Cisco just introduced in 2012.
View 2 Replies
View Related
Oct 1, 2010
I have an NTFS formatted USB disk drive (Western Digital My Passport Essential Black 320 GB WDBAAA3200ABK) attached to the WRT160NL wireless router (Firmware Version 1.0.02), and I have video, picture and music files on the USB disk drive in three folders: Videos, Music, Pictures. Auto-scan is disabled, I scan the media files manually by clicking on the 'Scan All' button.
PROBLEM 1 The worst problem is that the router is very sensitive to files that can't be recognized by the router as media files. For example if there are subtitle files (*.str) between the media files, then strange and nondeterministic things happen: some valid media files are skipped and not included in the media database; some files included but the file names are mixed. The most irritating in the bug is that there is no log file, where you could find the problem, and so you never know which file cause the problem, and you have to browse through all the files hunting for the cause.
PROBLEM 2 When the router is in the process of scanning the media files, then the internet (WAN) connection often can't be used, although the router can be accessed and the status says it is connected to the internet.
View 4 Replies
View Related
Aug 1, 2012
I'm very disappointed with this EA4500 DLNA feature this is one of the main reasons why i got this router.My Sammy TV can detect the USB that is attached and is able to view the files in the drive but when you play any video file larger than 1gb it does not work even shuts down my TV.Only on smaller files does it work flawlessly I know its not the TV because I have played those files on my previous Router (Netgear WNDR3800) and they even work when i connect the hard drive directly to the TV has any one else had this issue happen to them?
View 9 Replies
View Related
May 28, 2012
I am trying to stream movies and music to my Panasonic TV. I have a USB hard drive connected to the EA4500.
The TV sees the media on the device and music plays fine. However, every movie I've tried shows up with an exclamation point and when I try to play it I get a message to the effect that "unable to open media". Is the EA4500 media server only compatible with certain movies?
View 9 Replies
View Related
Jul 9, 2012
dlna server of ea4500 does not supports time seeking? No rewind? I have tryed to plug usb-flash with video files for testing before buying an external HDD and... REALLY no time seeking?
View 3 Replies
View Related
