Linksys Wireless Router :: DPC3825 - How To Reset A New Password
Jan 9, 2013
I got a problem with my router CISCO (DPC3825) where the eithernet is working properly and the wireless is not, and I had to plug the usb to make the setups, and suddenly the wireless was working but when I tried to reset the password something worng happened change the set of the wireles
View 2 Replies
ADVERTISEMENT
Nov 13, 2010
NIB DPC3825 cable modem. Called my provider and got it provisioned and its working (I'm on an ethernet connection posting this). But when I http to 192.168.0.1, I get a screen that doesn't quite look like the one in the manual. I enter the "admin" and "W2402" and click login, and the screen refreshes but nothing happens (no configuration options, only able to check status of downstream and upstream channels). Pushing the factory reset button for ten seconds to load defaults makes the lights blink and then reboots; same result as above. Pushing the wireless config button has no effect at all.
View 3 Replies
View Related
May 23, 2012
I forgot it. How do I either find out what it is, or reset the E1000 so I can create a new one? (Connection now working fine. Held the reset button for 30 seconds, and conmnection pops right up again.
View 4 Replies
View Related
Jan 9, 2008
i'm attempting to access the router's configuration options (192.168.1.1) and it's requesting a user and a password, i have not set any of them so i'm using the defaults, been, user (blank), password (admin) but is not taking them; after 3 attempts it gives me a 404 error.
View 6 Replies
View Related
Jul 4, 2007
I have changed the router username/password in the past and either I can't remember it or its not accepting what I am entering, because the router logon will not go through. I have unplugged the router for 5 mins and then let it come back on and still cant get in, pressed the reset button down and let it come back up still nothing, and I have unplugged the cable modem and router for five mins and then plugged them both back up and I still can't get the router to reset to the default admin password. In the past it has worked before but now nothing I try will let me into the router interface to set up anything.
View 4 Replies
View Related
Mar 7, 2009
how to reset password on a WRT54G2?
View 3 Replies
View Related
Jul 8, 2012
I have an E3200 router and need to know how to reset the password... cant connect my tablet because it asks for cisco connect password and I have NO CLUE what it is... if i do the reset on bottom of my router will it let me reset my password???
View 3 Replies
View Related
Dec 26, 2012
I need my password reset on my Linksys cisco E1000
View 2 Replies
View Related
Sep 11, 2007
im trying to reset my linksys WRT54G wireless router because im trying to change some settings. i tried the 192.168.1.1 and it asks for a password, but i dont remember putting one on....i tried the admin in the password field and empty name field but that dosent work.I've tried holding the reset button on the router itself for 10sec+ but that dosen't seem to do anything.
View 9 Replies
View Related
Jul 2, 2011
Is there a way to reset the parental password for the E300? I cannot figure out my Parental Passowrd and when I click recover passowrd I see my clue. From my clue I cannot get my password. So do I have to reset my router and start from scratch? Or is there another way to recover it.
View 1 Replies
View Related
Jul 21, 2012
Using router WRT160N when trying to change password system locks lost password and hit reset now everyone in neborhood can access my router running real slow now
View 4 Replies
View Related
Mar 23, 2013
WRT54G2. I forgot password , but have to reset anyway. Currently have desktop w/XP. a laptop w/Vista and will be adding a Widows 8 64 bit laptop.. Any special consideration for settup with the Window 8?
View 1 Replies
View Related
May 10, 2013
I have a CISCO Linksys E2000 with a model DPQ2202 modem and my old password no longer works. paste the url link and the instructions for me to reset my password?
View 1 Replies
View Related
May 13, 2013
I was given this router (it's my 3rd one) and cannot get the reset button to reset the password. I have run throught a 30/30/30 reset as well as just holding the button in for the standard 30 seconds.
I know the router works, as in i can ping it. It asks for a password when i go to 192.168.1.1, but *blank* and "admin" do not work. When i click the cancel button it displays a pink(salmon) screen that says "401 Unauthorized Authrization required". (all of this is when i am connected to it with an ethernet cable to #1)
When it's sitting there it has an led lit over power and one ove wlan which flickers from time to time.
View 1 Replies
View Related
Apr 21, 2013
I have just moved and my ISP is the same ( Comcast) but I'm in a different region of the country. The former service (modem) was a cisco (1 port) that I connected my EA 2700 Cisco router to and it worked like a charm. My IP phones came right up as well. Now I have an modem/router combo (provided by my ISP) and when ever I attempt to connect to my VPN it will give me an error and not connect. I was told by my ISP that I could bridge the router and try that way.Do I need to set up all over again? or have the settings remained. Also I am unable to access my router with admin/password. How do I reset the password?
View 1 Replies
View Related
May 28, 2012
I cant remember my password and i lost my cd installer. someone hacked my internet line< I want to change my password but cannot get through the router mainframe.How can I access my router?
View 3 Replies
View Related
Oct 10, 2011
I changed my E1000 router name successfully, and then went into the Administration section to change my password. After changing the password and clicking on Save a small screen pops up asking me to verify my router's username and password. When I enter the exact same user name and password it does not accept them. When I try to enter the old user name and password it does not accept them either. I then try combinations of the two and it still will not accept the input. I have reset my router 4 times now and this keeps occurring. I am completely baffled.
View 6 Replies
View Related
Nov 4, 2011
I have a DPC3825 from Shaw Cable in Canada. I'd like to use my Airport Extreme as a repeater using WDS. I've clicked the checkbox for "Allow wireless signal to be repeated by a repeater" and entered my Airport's MAC Address, but my Airport Base station doesn't see it as a WDS Peer.
View 1 Replies
View Related
Apr 29, 2013
Just got a Cisco DPC3825 from my ISP. I need to connect my other desktops to the wireless router all over the house and have two questions.
1. What is the best wireless adapter to use so my other desktops will be able to access the router?
2. What is the distance of signal before I need a signal booster and if I do need to boos the signal, what is the best device to do that? (we stream video, music, light gaming and general internet applications).
View 2 Replies
View Related
Dec 17, 2012
Recently installed a new CISCO DPC3825 and set up for wireless. I can connect to the network, signal strength excellent, but NO Internet. i have read a few threads showing similar issues, but i am getting lost when i try to troubleshoot further. i ran a command 'ipconfig/all' and got some data. I am confused also as under my network adapter it says 'media disconnected' .
View 1 Replies
View Related
Feb 1, 2012
I have CISCO DPC3825 router and theres about 3 computers and 2 wireless devices using internet through it. When i connect to a online video game I get these mini-disconnects. It happens periodically and frequently I'm not sure what is causing it.
View 1 Replies
View Related
Sep 20, 2012
i have a dpc3825 cable mdem gateway i spent 4 hours on the phone with charter yesterday i cant access the admin part of the router i go to 192.168.0.1 and up comes the setup username and password i have reset it numerous times i have left it blank as per instructions i have tried admin and blank cusadmin and password i cant get in
View 1 Replies
View Related
Oct 31, 2011
I am wondering how to reset the password for my wireless router? I am finding it hard to set up a new pc each time because it seems the password is always wrong. I want to set it to something I will easily remember.
View 2 Replies
View Related
Dec 6, 2012
I am needing to reset my password for wireless router. I do not have the previous password
View 1 Replies
View Related
Nov 17, 2012
How to reset password belkin wireless router
View 2 Replies
View Related
Dec 11, 2012
I have a used wireless belkin router no cd with it i am using it now however anyone has access as i dont know the previous owners password i was wondering if i set it to default factory setting what it would do its model number isF5D7230-4 and im running windows 7 i tried you tube and they walked me through cmd then ip config then it walked me through login no password and i followed entire vidio several times it does not work?
View 1 Replies
View Related
Jan 25, 2013
how to reset password for wireless d-link router
View 2 Replies
View Related
Feb 13, 2011
I followed the instruction and type cmd, then in the black screen, i typed ipconfig. lots of data appeared, i copied the ip address to the browser, but it can't open the page.
View 2 Replies
View Related
Dec 12, 2012
How do i have reset my trenda router without a disk?
View 3 Replies
View Related
May 8, 2012
how do i reset my password for y tenda wireless router w311r
View 1 Replies
View Related
Oct 30, 2011
I forgot my password to my Belkin 54g wireless router. How do I reset the password or recover the original one?
View 5 Replies
View Related
Jan 13, 2012
I have a wireless broadband router model number WRTA-108GD, I have forgotten the password and have a new ipod device which I cannot use on wifi without the password, anyone know how I can unlock or reset without the original password.
View 1 Replies
View Related
Jan 6, 2013
I am trying to figure out whyt my DPC3825 does not maintain a FTP session I did not really want to post this message rather I am trying to figure out how to search this board.
View 1 Replies
View Related