Linksys Wireless Router :: Unable To Access Company VPN - How To Reset Password
Apr 21, 2013
I have just moved and my ISP is the same ( Comcast) but I'm in a different region of the country. The former service (modem) was a cisco (1 port) that I connected my EA 2700 Cisco router to and it worked like a charm. My IP phones came right up as well. Now I have an modem/router combo (provided by my ISP) and when ever I attempt to connect to my VPN it will give me an error and not connect. I was told by my ISP that I could bridge the router and try that way.Do I need to set up all over again? or have the settings remained. Also I am unable to access my router with admin/password. How do I reset the password?
View 1 Replies
ADVERTISEMENT
Jul 21, 2012
Using router WRT160N when trying to change password system locks lost password and hit reset now everyone in neborhood can access my router running real slow now
View 4 Replies
View Related
Apr 18, 2012
I just bought an E4200 and it was working perfectly, very easy to install, all that it promises. Then I had an energy peak. For some reason, don't ask me why, I did RESET the router not thru the web nor thru Cisco Connect, but pushing the reset button at the back. I can't access the router anymore ! It keeps asking for a password that is never accepted. I have uninstalled cisco connect and tried again. Nothing. The router is not found. Keeps asking for a password. I tried everything: blan+admin, admin+admin, the password I used to have (provided at the cisco connect uninstall).It seems that the RESET never worked. The router is working thru cables, meaning when I can connect to the internet wired. But the router is never found wireless.How could I update the firmware if the router is not recognized (or if I don't have a username+password) ?
View 9 Replies
View Related
Oct 24, 2012
I have a ASA 5505 that I have been using to test run the IPSec VPN connection after studying the different configs and running through the ASDM I keep getting the same issue that I can't receive any traffic.
The company LAN is on a 10.8.0.0 255.255.0.0 network, I have placed the VPN clients in 192.168.10.0 255.255.255.0 network, the 192 clients can't talk to the 10.8 network.
On the Cisco VPN client I can see lots of sent packets but none received.
I think it could be to do with the NAT but from the examples I have seen I believe it should work.
I have attached the complete running-config, as I could well have missed something.
FWBKH(config)# show running-config
: Saved
:
ASA Version 8.2(2)
[Code].....
View 2 Replies
View Related
Nov 15, 2011
Basically we have 5 users in one of our offices and the internet works completely fine.However we cannot access the company Intranet. We receive 'The page cannot be displayed'.I have no idea why because all other sites work okay!Note: The Intranet can be accesed from home and libraries as I have checked aswel as 2 offices we have, everything works fine.It's just the one office and everything else works fine.
View 2 Replies
View Related
Nov 5, 2006
I have taken over maintenance of a customer site from another service provider. I need to reprogram several WAP54G units. I have reset the units with the reset button. However, this does not reset the admin password back to admin.
View 9 Replies
View Related
May 23, 2012
I forgot it. How do I either find out what it is, or reset the E1000 so I can create a new one? (Connection now working fine. Held the reset button for 30 seconds, and conmnection pops right up again.
View 4 Replies
View Related
Jan 9, 2008
i'm attempting to access the router's configuration options (192.168.1.1) and it's requesting a user and a password, i have not set any of them so i'm using the defaults, been, user (blank), password (admin) but is not taking them; after 3 attempts it gives me a 404 error.
View 6 Replies
View Related
Jul 4, 2007
I have changed the router username/password in the past and either I can't remember it or its not accepting what I am entering, because the router logon will not go through. I have unplugged the router for 5 mins and then let it come back on and still cant get in, pressed the reset button down and let it come back up still nothing, and I have unplugged the cable modem and router for five mins and then plugged them both back up and I still can't get the router to reset to the default admin password. In the past it has worked before but now nothing I try will let me into the router interface to set up anything.
View 4 Replies
View Related
Jan 9, 2013
I got a problem with my router CISCO (DPC3825) where the eithernet is working properly and the wireless is not, and I had to plug the usb to make the setups, and suddenly the wireless was working but when I tried to reset the password something worng happened change the set of the wireles
View 2 Replies
View Related
Mar 7, 2009
how to reset password on a WRT54G2?
View 3 Replies
View Related
Jul 8, 2012
I have an E3200 router and need to know how to reset the password... cant connect my tablet because it asks for cisco connect password and I have NO CLUE what it is... if i do the reset on bottom of my router will it let me reset my password???
View 3 Replies
View Related
Dec 26, 2012
I need my password reset on my Linksys cisco E1000
View 2 Replies
View Related
Sep 11, 2007
im trying to reset my linksys WRT54G wireless router because im trying to change some settings. i tried the 192.168.1.1 and it asks for a password, but i dont remember putting one on....i tried the admin in the password field and empty name field but that dosent work.I've tried holding the reset button on the router itself for 10sec+ but that dosen't seem to do anything.
View 9 Replies
View Related
Jul 2, 2011
Is there a way to reset the parental password for the E300? I cannot figure out my Parental Passowrd and when I click recover passowrd I see my clue. From my clue I cannot get my password. So do I have to reset my router and start from scratch? Or is there another way to recover it.
View 1 Replies
View Related
Mar 23, 2013
WRT54G2. I forgot password , but have to reset anyway. Currently have desktop w/XP. a laptop w/Vista and will be adding a Widows 8 64 bit laptop.. Any special consideration for settup with the Window 8?
View 1 Replies
View Related
May 10, 2013
I have a CISCO Linksys E2000 with a model DPQ2202 modem and my old password no longer works. paste the url link and the instructions for me to reset my password?
View 1 Replies
View Related
May 13, 2013
I was given this router (it's my 3rd one) and cannot get the reset button to reset the password. I have run throught a 30/30/30 reset as well as just holding the button in for the standard 30 seconds.
I know the router works, as in i can ping it. It asks for a password when i go to 192.168.1.1, but *blank* and "admin" do not work. When i click the cancel button it displays a pink(salmon) screen that says "401 Unauthorized Authrization required". (all of this is when i am connected to it with an ethernet cable to #1)
When it's sitting there it has an led lit over power and one ove wlan which flickers from time to time.
View 1 Replies
View Related
May 28, 2012
I cant remember my password and i lost my cd installer. someone hacked my internet line< I want to change my password but cannot get through the router mainframe.How can I access my router?
View 3 Replies
View Related
Oct 20, 2012
I am trying to setup two wireless routers in my network. I purchased a E1200 N router and an older G Linksys router upstairs.When I got the N router I set it up a stand alone router and it worked great for a week or so. I then wanted to try to get both routers going to I changed the IP address on E1200 to 192.168.2.1....the router rebooted and then could not login. I am not able to get any internet conntion anymore. When I type 192.168.2.1 it goes to page can not be displayed, 192.168.1.1 same thing. Ipconfig shows some address auto address that I did not put in and i am also not connected to a modem. I cant log into the router at all.So reset: I held down the button for 30 seconds...let go and it blinks and then goes solid but does not reset. Unplugged router for 5 minutes tried again. Cant get into 192.168.1.1..will not prompt for anything. I have tried to reset this router about 10 times and can not get into the default login at all.
View 1 Replies
View Related
Oct 10, 2011
I changed my E1000 router name successfully, and then went into the Administration section to change my password. After changing the password and clicking on Save a small screen pops up asking me to verify my router's username and password. When I enter the exact same user name and password it does not accept them. When I try to enter the old user name and password it does not accept them either. I then try combinations of the two and it still will not accept the input. I have reset my router 4 times now and this keeps occurring. I am completely baffled.
View 6 Replies
View Related
Sep 10, 2011
So, I've been having problems with connecting my HTPC to the E2000. I had an old D-link router + USB Wireless N adapter, but after the Dlink died, I bought the E2000, and upgraded to a faster N Adapter. Anyway, connection had been sketchy using the WPA/WPA2 encryption. I turned it off completely, and did get some better wireless speeds. I couldn't leave it open, though, as there are tons of laptops around my apartment that end up connecting to my network. Connecting wirelessly using that particular adapter continued to give problems. Two blackberries plus a Nookcolor connect with no issues (maybe because they're wireless G, who knows).
I then decided to reset the router by simply pressing and holding the reset button as I've done on all my other routers. It did reset, and reboot, but when it came back on, it would no longer connect to the internet. I've connected directly to my modem, and that works fine, but once I connect to the router...nothing. I did a hard reset (30/30/30), and that cleared everything, it seemed. The HTPC now connects easily, but there is still no internet connection. This is proving to be very frustrating.
Is there something I could have done wrong by doing that very first reset? Is there anyway to configure to get back my internet connection?
View 4 Replies
View Related
Mar 28, 2011
Cisco 7609 Router, Enable password unable to reset.
Many times CTRL+BREAK Key combination while booting the router does not takes the console to ROMMON.
Router boots using the IOS image in the bootdisk0: (For entering into the ROMMON, removed both the external Flash disks also - no use)
2 or three time in a day it enters in to the ROMMON while pressing CTRL+BREAK.
Tried in the ROMMON (one Sup is removed) with confreg 0x2142 followed by reset/boot commands, the router is booting with the startup config.
View 2 Replies
View Related
May 21, 2012
I have been fighting against this Lynksys cisco switch to be able to restore admin password, no success. Theorically, is just unplug and plug switch, press ESC and press option 3) Password Recovery Procedure. Then Enter and Enter and switch will boot normaly with admin/blank password, well, not work,.
*******************************************************************
*** Running SW Ver. 1.2.1b Date 31-Aug-2006 Time 13:47:21 ***
*******************************************************************
HW version is 00.03.00
Base Mac address is: 00:1e:e5:1c:fd:eb
[Code]......
View 1 Replies
View Related
Dec 19, 2012
I got a refurbished E1000, has been great.
Using it w/ my HP laptop since July, just got Mac book and was trying to use w/ that addition laptop but could not find router password, also 192.168.11 would not let me access w/ password: admin, so I reset the router and renamed it. NOW my HP laptop shows my router connected, BUT will not access internet.
View 3 Replies
View Related
Oct 31, 2011
I am wondering how to reset the password for my wireless router? I am finding it hard to set up a new pc each time because it seems the password is always wrong. I want to set it to something I will easily remember.
View 2 Replies
View Related
Dec 6, 2012
I am needing to reset my password for wireless router. I do not have the previous password
View 1 Replies
View Related
Feb 2, 2007
I'm trying to setup a Linksys wireless-g router model number WRT54G with my DSL connection. I followed the basic instructions that came with the router and towards the end of the process it says detecting network settings with a % bar. The bar fills to 100% and then asks for a password. I've tried the password my DSL company gave me along with various other things like admin etc. After I enter the password I hit enter and it just asks me for the password over and over again.
View 9 Replies
View Related
Nov 17, 2012
How to reset password belkin wireless router
View 2 Replies
View Related
Dec 11, 2012
I have a used wireless belkin router no cd with it i am using it now however anyone has access as i dont know the previous owners password i was wondering if i set it to default factory setting what it would do its model number isF5D7230-4 and im running windows 7 i tried you tube and they walked me through cmd then ip config then it walked me through login no password and i followed entire vidio several times it does not work?
View 1 Replies
View Related
Jan 25, 2013
how to reset password for wireless d-link router
View 2 Replies
View Related
Apr 16, 2013
I have the WAP11 serial number G3110320414 that does not have a reset switch in the back. How do I get back to factory settings?
View 3 Replies
View Related
Mar 8, 2011
I've got a 1941W, and we don't have the password for the access point. I've got access to the router, but not the access point.It's not the default password (cisco) and it's setup to use username/password (rather than just password).How do i reset this device? I'd like NOT to lose the config if possible.
View 1 Replies
View Related
